Unable to connect to vCenter Converter Server and failure to register the extension
Hello
Recently, I was doing the following error on our vCenter Server server while trying to import a virtual machine - "unable to connect to the server vCenter Converter Server.
I followed the recommendations of the other post of the community http://communities.VMware.com/thread/239203 However, I still get the same error.
I tried to run a repair on vCenter Converter of add/remove programs however I get the following error:
"Cannot save the extension.
I restarted the server as well and still no change.
Any ideas?
If you have changed the IP address on the VC, your best option is probably uninstall the Update Manager and converter, once again. delete their directories under \program files\vmware\infrastructure\ installation, restart and install again.
Tags: VMware
Similar Questions
-
Hi all
I'm having some trouble converting server physical windows using autonomous vConverter 5.5.
error message:
"An error occurred when opening a virtual disk. Verify that the Converter server and source running machines have network access to the ESX/ESXi hosts source and destination. "
I have attached the bundle newspapers. Please notify.
See you soon...
Your error is:
2014-11 - 04T 18: 27:27.587 - 08:00 [01236 info "Default"] GetManagedDiskName: Get disklib file name as vpxa-nfcssl: / / [a0110-vmgt70-001] WIN-MOVRCVCSITG/WIN-MOVRCVCSITG.vmdk@a0110tesxhyp01.datacenter.telenorservices.com: 902! 2 b 52 87 75 03 03 ff 49-67 2f 3 a 61 76 and 00 cd e1
2014-11 - 04T 18: 27:27.587 - 08:00 [01236 WARNING 'Default'] [, 0] NfcNewAuthdConnectionEx [NFC ERROR]: unable to connect to peer. Error: Failed to search for host for a0110tesxhyp01.datacenter.telenorservices.com server address: the requested name is valid, but no data of the requested type was found
2014-11 - 04T 18: 27:27.587 - 08:00 [01236 info "Default"] Sysimgbase_DiskLib_OpenWithPassPhrase failed with 'NBD_ERR_NETWORK_CONNECT' (error code: 2338)
Check the manual on the required ports.
HTH
-
Original title: unable to connect to this Terminal Server session remote control?
Whenever I work with my friendly by connecting remotely, this information is pop ups as follows:
Remote control cannot connect to this Terminal Server session. It is a known problem with Windows 2000 and XP and can occur under certain, rare conditions. To remady this situation, ask the local user switch to another session (connecting, on or off), or restart the computer.I know it's something related to windows authentication. But want to know in detail about this notification.Hi Victor,
The question you posted would be better suited in the TechnNet Forums.
I would recommend posting your thread in the link below:
(Services Terminal Server) remote desktop services:
http://social.technet.Microsoft.com/forums/en-us/winserverTS/threads
-
Windows 8. error message unable to connect to a windows server.
Hi, I have a dell Windows pc 8.
He just started to give an error message
Unable to connect to a windows server. Windows could not connect to the windows service install all agent users. This problem prevents standard users connect. As long as administrator, you can go through the system event log to see why the service did not respond.
Right now my wife can not access his account. my email will not download the messages. I can't remove programs as it says I'm not administrator. Also the external hard drive does not connect.
Any help please
Kumar,
Thanks for your help. I found a similar problem after I posted. Vijay said on July 7, 2013. He proposed to test the computer in safe mode, and then perform a clean boot to solve the problem.
I tested in mode of sure start before returning to the normal sign in and magically, it seems to have solved the problem.
If the problem comes back, I will try your solution.
Can not think of any changes made to the computer with the exception of a Windows update last weekend.
Thank you for your support
Phil
-
Once again; same problem, others have encountered but nothing seems to work.
An error occurred when opening a virtual disk. Make sure that the converter server and source running machines have network access to the ESX/ESXi hosts source and destination.
We have 1 physical servers, we need to see. Here is the environment. All 3 separated location, 3 all firewall separated
1 physical servers
-Internal IP address; 172.16.160.21
-FARM FirewallvCenter Server
-Internal IP address; 172.16.1.85
-Local Office (ALX)
Location of destination (ESXi host):
-Internal IP address; 172.16.153.20
-Firewall ROOMMATE
Already completed:VMware KB: disable SSL on VMware Converter Standalone 5.x encryption SSL disabled in converter-worker
Firewall are open / Tunnel is open throughout the environment.
I have attached the logs.
Thank you very much
POCEH; Thanks for the reply. But I wouldn't be pulling my gray hair if I knew what the problem was. I understand that there not for the peer but why...?
-
I lost the connection to Windows 2003 server and through the connector.
I lost the connection to Windows 2003 server and through the connector.
original title: WHS connector has stopped working.Hi Mjopritchard,
The question you have posted is related to Windows Home server and would be better suited to the Windows Home server community.
Please visit the following link to find a community that will support what ask you: -
I can't open the pdf files. I get a fatal error that said that acrobat was unable to connect to a DDE server. How can I get the pdf file to open it?
Hi Kane,
Please follow the steps mentioned in the following forum thread: -.
Acrobat, unable to connect to a DDE server
I hope this helps!
Thank you
Tanvi
-
It is seemly all things are OK configuration web page
But vco client is unable to connect to vcenter
Have a screenshot of the vCenter plug-in would help.
If it is set at the session by the user that the vCO will try to authenticate with the LDAP credentials embedded on the vCenter which of course will fail.
-
I need help installing Acrobat Reader - unable to connect to a DDE server messaged. Cannot access documents
Please see if "acrobat could not connect to the dde Server" when openning Adobe Acrobat PRo XI help.
-
The Vcenter VMware Server and vmware work station do?
The Vcenter VMware Server and vmware work station do?
No, only the infrastructure products
-
Unable to connect 660 s Inspiron with Win 7 Ultimate to the internet
Unable to connect 660 s Inspiron with Win 7 Ultimate to the internet. Window, says "you are not connected to a network. Clicked on the difficulty of the problem of connection and new window says "install a driver for your network adapter." The computer is connected to a Xfinity modem via an ethernet cable and no wifi. Still nothing. How to connect?
Happy it all resolved now.
Please mark this thread as answered.
-
I don't have my serial number of Photoshop Elements and I never registered the product
I don't have my serial number of Photoshop Elements and I never registered the product
You need to contact Amazon
-
I had no idea that I needed to use a CD to download my Adobe Photoshop elements 12 on my desktop MAC and have already registered the product; Now, how can I download it? I tried searching on the web and no luck. Please help me!
You don't need a CD to download anything; just download & install the trial version of http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements, and then activate it with your serial number.
-
Unable to connect to vCenter Server 5.0 using the vSphere Client - unknown error.
I am trying to connect to vCenter using vSphere client (from different computers, including the server itself) and get this:
vSphere Client could not connect to "vCenter_Server_IP_Address".
A unknown connection error has occurred. (The request has failed because of a logon failure. (Unable to connect to the remote server))I am able to connect to the host directly, but of course, can't do anything with it since the vCenter is "in da house".
There is no problem with it, not big changes and nothing indeed directly on the server vCenter (i.e. W2008r2x64) so, my confusion deepens. 5.1 ESXi
Any ideas what could have happened and how to fix it?
observe the following error in the logs.
2014-04 - 04T 13: 35:23.506 + 01:00 [error 02720 "Default" opID = SWI-f3a52464] [VdbStatement] given the driver diagnosis are 42000:1:1105: [Microsoft] [SQL Native Client] [SQL Server] could not allocate space for object ' dbo. VPX_EVENT'. 'PK_VPX_EVENT' in 'VIM_VCDB' database because the 'PRIMARY' filegroup is full. Create disk space by deleting unnecessary files, removing objects in the filegroup, a
Follow this article to fix the problem.
-
Unable to connect to Vcenter Server
I couldn't connect to vCenter Server when you use the web client of vSphere. The administrator accesses vCenter Server by using the customer earlier in the day. ?
Verify that the vCenter Single Sign-On service is running on the server vCenter Server
Maybe you are looking for
-
Original title: how to enable windows updates? I get an error 0x8DDD0003 that indicates the windows updates are disabled by the administrator and the windows update does not appear on my menu start / all programs. The Microsoft Knowledge base offers
-
Whenever I try to connect to the internet using yahoo or msn, screen get a bunch of lines through it, and I have to continue to try to get a page of ledigible
-
How to determine the DPI of the PNG image in Windows Explorer?
In Windows XP and Vista, to determine the DPI of a PNG image, I could do a right click, go to properties, then the Summary tab, and there were entries for resolutions horizontal and vertical of the PNG as well as the width, height, and bit depth. Ho
-
Hi, expert, I think that there are a few FileConnection flee to my code (doesn't have to call a close on this method), Marvel just to the following questions about this: 1. If there is leak memory during the execution of the process, once the process
-
Hello I have a little problem. Recently, I have increased my internet speed, 200 MB, but do a speedtest never go beyond the 95/99 MB. If I connect a PC directly to the modem provider, I get to 200 MB. It will take a special configuration in the Cisco