Computer laptop bluescreens with BUGCODE_USB_DRIVER after you have closed the lid

Similar Questions

• Unable to connect with RDP after you have configured the port forward

  I have configured my router with port pushing forcefully with port 3389. Now when I try to rdp to the pc from outside I get the following error:

  Remote Desktop cannot connect to the remote computer to one of the following reasons:

  1. remote access to the server is not enabled

  2. the remote computer is disabled

  3. the remote computer is not available on the network

  I checked that all these 3 does not apply to me. I was able to RDP pc (with the local ip address) from another pc in my network home but not from outside. Could someone help me please?

  Is the computer on which you want to connect with Remote Desktop [DRC], IE. the DRC, by using a host address static IP on your LAN? In the contrary case and the computer is restarted its possible its LAN IP address changed by denying any plan of port forwarding you set up in your router. Go to the site CanYouSeeMe and host DRC computer test.

  http://www.canyouseeme.org

  Also, when the connection to make sure that you really test from a client outside the DRC and does not use the public IP address of the router from a local computer on your local network.

  http://theillustratednetwork.MVPs.org/RemoteDesktop/TroubleshootingDiagrams/Basic.html

  Finally you are sure that the public IP address of the router has not changed? If you have a dynamic IP from your ISP, you can use a free as no - IP.com that maps a name to your public IP address. Call using the fully qualified domain name. Many routers support which is a free service like DynDNS for example. You can also download and install a small program on the host of the DRC. The program communicates with the No - IP or DynDNS servers on a regular basis. The server so you know what your current IP address and that map to your fully qualified domain name.

  http://www.no-IP.com/?utm_source=MSN&utm_medium=CPC&utm_term=no%20IP%20.com&utm_campaign=brand+MSN

  http://dyn.com/DNS/

• Any update on the problems with Safari after you have installed the new update?

  Any update from Apple. How long this problem will be resolved?

  What is the problem?

• Remember the last string value after you have closed the file exe

  Hello

  I have problem with storing data in the string.

  I work on small projects, where I need to print labels. I use to print the string control numbers. every time I close the full exe and re open the exe program, control of the chain not recalls last value entered and displayed in white. So, once again I have to memorize or take up the last value entered human and animal chain in it every time when I opened the exe.

  What should I do?

  Before closing your executable file, you must have the program write the value of this string of output to a file.

  When your program at startup, it should read the file and write the value in a local variable to this string.

• I bought Photoshop CC 2015 creative thinking Cloud before running the trial version of my computer. After you have installed the creative cloud, the box with the number of days remaining still apears. How can I proceed?

  I bought Photoshop CC 2015 creative thinking Cloud before running the trial version of my computer. After you have installed the creative cloud, the box with the number of days remaining still apears. How can I proceed?

  Check your account indicates the subscriptions that you expect (and that the adobe, used in the next step id is correct) by logging in here and checking the status of your subscription, https://www.adobe.com/account.html

  then, if it's current, disconnect and then back to your client application using the adobe with the link above in cc id: http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  If this fails, CC help | Applications creative Cloud back to update evaluation Mode to 2015 CC

• KB955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

  original title: Windows Update acts confused - kb955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

  I just reset my CMOS settings, writing zeros for my hard drive, repartitioned, reformatted and used the recovery cd Gateway system to get my computer to Windows 98se - factory settings, except at the beginning of the recovery of the system, when it says "press any key for advanced options," I pressed a key and then I unchecked all the default (3rd party) applications including Norton and left only 2 checked: "Updated USB Hub" and "Windows Shutdown Supplement," while nothing has been installed, leaving only win98.
   
  Then I used my disc XP Home (SP2) update.  I, immediately after the upgrade to Windows XP, installed "Office XP with Frontpage, Developer Edition", then Norton 2012 before never connect to the internet.
  Then, I connected to the internet and continuously update of Norton, before ever hitting the Windows Update page. The first thing I did then was to activate Windows, and then activate the office.
  Then I hit the update of Windows "button" that says "get all your updates in one place... upgraded"Microsoft Update".  I, then, just kept hitting the page update and restart, until I find the SP3.  Then, I took a break, until the next day.
   
  I have an ADSL broadband, with a Linksys EtherFast PCI card.
   
  Then I got SP3, which installed without any problems.
  So I just kept "microsoft continuous update" manually (and reboot), until there is no more updates - EXCEPT, I always uncheck Windows Malicious Software Removal Tool - which was the only screening at the final stop for the night.  I think that I ticked the box "don't ask me about this update".
   
  Then, in the morning, after you have enabled automatic updates, I noticed the yellow shield - Windows security icon (or whatever it's called), so I clicked on it and checked it was tellimg me was available [when I checked "Custom Install (advanced users)"].  What showed was 1 update - 955759 KB.
   
  After the problem, already at the reformat (months and months), see the yellow shield telling me there are updates available, which were already installed (before rebooting), I checked manually on the internet with IE 8, pressing alt, "T", "U".  There is no updated list.  Then I checked through my history of update (twice), and KB955759 had not been installed.
   
  My update setting is to let windows download ('important') updates, but let me choose when to install them.
   
   
   
  What is the right - Windows Update (NO update important reporting) Site, or the yellow shield (reports [a] kb955759 [update])?
   
  I can not yet confirm he is supposed to be an update for XP home kb955759, because I was unable to locate any detailed documentation on this 'thing' that protect the yellow safety seems to think is a significant update.

  Comment 1: To my rquest, a moderator merged your thread in the Sub-forum Win7 updates with your wire in the Sub-forum of updates of Windows XP 20 Feb-12, c. 07:50 UTC.

  Comment 2: If you will not contact the MS Support on this issue?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~

  Just for the heck of it, I have disabled the automatic updates, cleared my browser cache, checked manually, updates from microsoft (windows) and found none (with the exception of software malware removal tool windows [which I have not installed]).  Then, I turned the automatic updates on, and without even being connected to the internet, the yellow shield popped up with the kb955759 "update"...

  Repost...

  1. If you open Internet Explore (only!) to http://windowsupdate.microsoft.com and run a CUSTOM scan, KB955759 appears in results?... If so, you manage to install it and/or security updates available?

  2 after no. 1 above [<>], is the 'yellow shield' icon appears in the Notification area (on the left of your clock)?  .. and if yes, by clicking on the 'yellow shield' icon tells you that KB955759 or any other updates is ready-to-be-installed?  .. .and if so, you manage to install it?

  3 after doing 1 # & #2 above [<>], is KB955759 or any other updates offered as a ready-to-install update when you go off your computer?  .. .and if so, you manage to install it?

  ... I guess that clearing the browser cache does not erase 'downloaded' updates.

  Nope. If you want to clear the queue of the update...

  OPTION A:

  1. stop the automatic updates service:

  Start > run > (type or copy/paste) services.msc > click OK
  Double-click automatic updates > click stop
  (Stopping the service will take a moment)

  2 remove the contents of the download folder:

  Start > run > (type or copy/paste) %windir%\SoftwareDistribution > click OK
  
  Open the download folder and delete its content
  Close the window.

  3. start the automatic updates service:

  Start > run > (type or copy/paste) services.msc > click OK
  Double-click automatic updates > click Start
  (Starting the service will take a moment)

  OPTION B:

  1. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [don't know the titles, etc..]

  2. make disappear/close the Troubleshooter automatically pop up.

  3 repaired 50202 in DEFAULT modes and AGGRESSIVE. [1]

  4 reboot.

  Does anyone know how to determine if software mailicious removal tool is installed on XP? [source ]

  Check the located log file...

  C:\Windows\Debug\ MRT. NEWSPAPER <>

  Related...

  ... This leaves us with the malicious software removal tool don't appear not.

  I guess I'll have to leave "auto-update" (I often have less than 65 M of free memory left and do not have enough memory to msrt) and don't assume no other current error. [source; 17 Aug-11]

  It's no wonder that you ended up having to do a clean install of Win98SE & then upgrade to Windows XP again!

  ================================================================
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not updates installed in Add/Remove Programs list.

• I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I have sandisk cruzer blade USB key

  Hi Rohit,

  Thanks for posting your query in Microsoft Community Forum. I understand that your USB drive is having problems of compatibility with your computer, but I would like to learn more about the issue in order to provide you with better assistance.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. When do you get exactly the error message?
  3. Have you tried to connect to any other computer on this flash drives?
  4. Your USB key works on other computers or have you tried to connect to different USB ports on this computer?
  5. Is the pen drive getting detected in the case or you are able to access the drive folder in the window of the computer ?

  The question may arise if the currently loaded USB driver has become unstable or damaged, or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.

  Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  This method will install the latest drivers from device to your USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  More information: Update a hardware driver that is not working properly

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• I signed up for try Adobe Captivate in my Adobe account. After you have reinstalled the verson of the trial with my Adobe account, he tells me there are days 00 for me to try the product. Why?

  After you have uninstalled the trial version of Captivate on our shared computer, I signed up for try Adobe Captivate in my Adobe account. After the relocation of the trial version with my account it tells me there is 00days for me to try the product. Why?

  If it is to be installed on the same machine that will explain why assuming you already exhausted the trial with the original installation.

• Hi people! Can someone advise me something in Lightroom please CC.  When I export files once after you have finished the adjustments etc. and I click 'Save with the previous' - how to find where it was recorded, if I forgot the last folder saved to?

  Can someone advise me something in Lightroom please CC. When I export files once after you have finished the adjustments etc. and I click 'Save with the previous' - how to find where it was recorded, if I forgot the last folder saved to?

  I guess you mean "Export with previous. If so, open the export page. It will be defined as "precedent".

• I apologize in advance if this isn't the right forum, but I need to do a reformat on this computer.  My question is, after you turn off the CC, PS, LR and bridge I have to uninstall as well?

  I apologize in advance if this isn't the right forum, but I need to do a reformat on this computer.  My question is, after you turn off the CC, PS, LR and bridge I have to uninstall as well?

  If you want to reformat the hard disk, in erasing all data on the computer, there is no need to uninstall.  Deactivation is sufficient.

• Windows 7 no sound after you have unlocked the PC

  I have Windows 7 Professional SP 1, running on a ThinkPad: Lenovo's laptop.  No matter when I manually lock the PC (with Windows + L) or the screen saver times out and locks the PC, after you have unlocked the PC no sounds work, at all.  I checked device - nothing wrong with that Manager.  I checked my drivers - all to date.  There is no update in Windows Update.  I ran the audio troubleshooting integrated: he can't find anything wrong.  In the Volume mixer, I see even the green bar pulses up and down with the intensity of sound is supposed to be played - except that I can't hear anything no matter what.  I tried inhibition and reactivate the speaker control.  The only thing that 'fixed' it is logging and back, which of course is a pain.  Can anyone think how this can be fixed?  Thank you.

  Hello

  For me, it looks like a driver problem.

  I know that you have checked for drivers on windows update and they are up to date. However I suggest to uninstall the audio drivers from the Manager of devices and then re - install on the manufacturer's Web site and see if that helps.

  Let us try the following steps:

  (a) click Start, type Device Manager and hit enter.

  (b) expand sound, video and game controllers.

  (c) make a right click on the audio adapter Conexant and click on uninstall.

  (d) computer.

  (e) log on to the site of the manufacturer (Conexant) audio adapter, download and install the latest drivers and install them.

  Please let us know if you need more help with this, or everything related to Microsoft Windows.

• After that I closed the lid on my laptop, when I reopen it, I have to keep moving the lid until I can get a picture. What could be the problem and how to fix?

  After that I closed the lid on my laptop, when I reopen it, I have to keep moving the lid until I can get a picture.  What could be the problem and how to fix?

  Hello

  Looks like a loose connector or a short circuit in the video cable. Check with a real
  store computer (one that works on computers cell phones internal ASUStek) or ASUStek
  Support, their documentation and online in their forums.

  Not a maintainable question by the user.

  ASUStek support
  http://support.ASUS.com/

  ASUStek Forums
  http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-us

  ASUStek drivers
  http://support.ASUS.com/download/download.aspx?SLanguage=en-us

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Problem has been detected and windows has been shutdown error STOP: 0x0000008E. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

  Original title: problem has been detected and windows has been shut down. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

  Computer Message: Check if you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video cards.

  Check with your suppliers of material, updates the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to start advance startup options, and then select Safe mode.

  Technical information: * STOP: 0x0000008E (0xC0000005, 0x8054556C, 0xADB78A98, 0x00000000)

  Beginning physical memory dump

  Total physical memory dump. Contact technical support for further assistance group.

  Hi fernandomventura,

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: Follow the steps mentioned in the articles below which deals with a similar question

   

  General troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E"-restore the system to achieve ".

  http://support.Microsoft.com/kb/945658/

  You receive a random "0x0000008E" error message on a blue screen in Windows XP

  http://support.Microsoft.com/kb/827663

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• After you have installed the Realtek drivers, I get code 10 error and cannot start sound.

  original title: help with my sound please

  After you have installed the realtek driver it says code error 10 can't start sound...

  also I can't find the button sound.video and games on the Device Manager heres the message in Event Viewer:

  Log name: System

  Source: PlugPlayManager

  Date: 17/05/2012-18:50:27

  Event ID: 12

  Task category: no

  Level: error

  Keywords: Classic

  User: n/a

  : My computer

  Description:

  The device ' in Build Conexant Type 2 modem "(HDAUDIO\FUNC_02 & VEN_14F1 & DEV_2C06 & SUBSYS_10250126 & REV_1000\4 & 37d33e44 & 0 & 0102) disappeared from the system without first be prepared for removal.

  The event XML:

   

     

      12

      2

      0

      0 x 80000000000000

     

      435

      System

      badimo-PC

     

   

   

      Modem Conexant - in the generation Type 2

      HDAUDIO\FUNC_02 & VEN_14F1 & DEV_2C06 & SUBSYS_10250126 & REV_1000\4 & 37d33e44 & 0 & 0102

      00000000

   

  Hello I want to,

  The problem you describe looks like you are maybe install the wrong driver for your sound card.
  Have you checked that the driver is for your specific device?
  If you look in your system's Device Manager, is there a yellow exclamation next to the audio controller?
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager
  If so, this seems to indicate that the drivers installed are not good for your sound card. Usually if you double-click the device in Device Manager, it will say something in the sense of "Device cannot start".
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Forums CWMS drop after you have entered the code meeting

  Hi all

  We have webex 2.6.1.45.B - AE, call out of work, but a drop after you have entered the code-meeting... Work of DTMF.

  may be, because: you are using a trial version of the Cisco WebEx meeting server which expires in 32 days. Buy licenses to host for your system to avoid the limitation of access host?

  or someone has an idea?

  Thank you very much!

  Hello

  This problem is caused by a bad configuration of the integration of CUCM with CWMS.

  Make sure you check you SIP Trunks and SIP configuration on CUCM routing model.

  Make sure that your points in routing SIP Trunk SIP of Point Application model.

  Make sure that the Partition configured in routing SIP model belongs to a CSS that is configured in the LoadBalancing SIP trunk under:

  1. change of itinerary calling search space

  2 outside dialogue see calling search space

  Also, refer to this post to understand why the model of routing SIP and Application Point SIP trunks are used: https://supportforums.cisco.com/discussion/12879351/cucm-and-cwms-call-routing

  In addition, this guide to the official reference documentation: http://www.cisco.com/c/en/us/td/docs/collaboration/CWMS/2_6/Planning_Guide/Planning_Guide/Planning_Guide_chapter_0101.html

  I hope this will help.

  -Dejan