Unable to create the Bug DB link

Similar Questions

• Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel. Got the unable to create the specified task

  Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel.
  Got the unable to create the specified task

  Hello

  What is the exact error message received when the problem occurs?

  Methood 1:

  Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps in the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833 

  Method 2:

  You can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  I suggest to put the computer in a clean boot state, and check if the problem persists, see the link:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: See step 7; Reset the computer to start as usual after troubleshooting is performed.

  Method 3:

  You can temporarily disable the security software and check if the problem occurs. Check out the following link to do the same thing:

  http://Windows.Microsoft.com/en-GB/Windows-Vista/disable-antivirus-software

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps! Let us know if you need more assistance.

• SyncToy 2.1 has stopped working, with the message "unable to create the folder pair. Unable to create the provider. Can I get help to fix it please

  After the last automatic update, I tried to back up my files (did this every week for at least one year). Message "unable to create the folder pair. Unable to create the provider"came. I tried again, same. The pair and tried to reset upward. Same message... anyone have an idea how to fix?

  Hi Steve,.

  The question you have posted is related to SyncToy and would be better suited in the SyncFX - SyncToy community. Please visit the link below to find a community that will provide the support you want.
  http://social.Microsoft.com/forums/en-us/SyncToy/threads

  Hope this information helps.

• When I try to connect directly in multiplayer FSX without gamespy, every time I get an error message saying: unable to create the connection to the host.

  When I try to connect directly in multiplayer FSX without gamespy, every time I get an error message saying: unable to create the connection to the host.

  I need help
  Kind regards

  Thank you very much!

  To host successfully a FSX session what follows is the key enabling

  my client (s) to join my host FSX session!

  "Players Maximum (for a shared together plane 2) leave the locations reserved for friends to 0 set."

  6122 6112 UDP port translation FSX multiplayer traffic of my remote 2 wire gateway to my router Linksys Wireless N DMZ to access game FSX host...

  Only a single router in my configuration of the DMZ, the external network to the router,

  in this case, the 2 wires, had defined port forwarding.

  Am now enjoying Gamespy (R.I.P.) FSX free hosting for my MP FSX sessions via direct connection.

  5 high to the author!

• "Unable to create the virtual SCSI device to the scsi: 0:0" import *. EGGS in ESXi 5.1u2

  Hi, I need to deploy a VM of *.ova in my cluster with 5.1 ESXi hosts u2 (1900470), but when I try to run it I get this error:

  Unable to start the virtual machine.

  Power DevicePowerOn module has failed.

  Unable to create the virtual SCSI device for scsi0:0, ' / vmfs/volumes/51e7fc6b-85806744-fb38-0021286bb22a/xxx.vmdk'

  Unable to create the virtual device. Stack 16 or 255 sectors per track is not supported.

  
  

  The same deployment works in another cluster with 5.1 ESXi hosts (700733) and on my vmware workstation 10.

  I have tryied compatibility material upgrade\downgrade with wmware workstation and download directly to my host but still do not

  I formatted the hard drive hard by ssh and readded to the inventory, I tried to convert vm to work cluster... nothing to see...

  Any suggestions? Thank you

  Solved! I don't know why but the import of virtual machines with 5.1u2 ESXi, heads, and sectors in *.vmdk file are reversed:

  BEFORE:

  ddb.geometry.biosHeads = "16".

  ddb.geometry.biosSectors = "255".

  DDB. Geometry.Heads = "16".

  DDB. Geometry.sectors = "255".

  AFTER:

  ddb.geometry.biosHeads = "255".

  ddb.geometry.biosSectors = "16".

  DDB. Geometry.Heads = "255".

  DDB. Geometry.sectors = "16".

  Connect to a host with SSH and editing *.vmdk file with VI will be the virtual machine starts without problems!

• VDDK v1.2 is unable to create the disc on the other file system

  I work on one file system other than NTFS for Windows and should be able to create a virtual drive it.

  Using the new v1.2 VDDK, I try the following command:

  VMware-vdiskmanager - c - a free - 0 TS 70 GB
  .pdvfs\myserver\2\CarlData\CarlData.VMDK

  It fails with the error:

  Unable to create the disc: the file is too large for the filesystem (0xc00000015).

  With the help of the utility even 1.1 VDDK works very well.

  If I map the 'share' to a drive letter, the next command in the V1.2 works too well:

  VMware-vdiskmanager - c - a free - 0 TS 70 GB Q:\2\CarlData\CarlData.vmdk

  I know from painful experience last year that the error "the file is too big" is pretty generic, and generally means vixdisklib think that the target file system is not NTFS.  I changed my driver year last to convince vixdisklib v1.1 it was OK to create a large virtual drive here.  "I also remember that the library is the distinction between a target name starting by".
  "compared to the other with a drive letter.  "Is there something I can do to make the v1.2 to accept the"
  .pdvfs' form of file name?

  I see a sensitive case named streams, acl persistent search for support as defining NTFS for this audit. Can you confirm if you have these?

  Thank you

  Annick

• Unable to create the virtual disk: fault. RestrictedVersion.summary

  Hello

  Im trying to create a virtual disk using the CLI on ESX4i.  The script is:

  vmkfstools.pl - Server 10.190.2.51 - c 20 g d eagerzeroedthick - a free /vmfs/volumes/Internal/test.vmdk

  When the script runs I get error: unable to create the virtual disk: fault. RestrictedVersion.summary

  Can someone tell me why please.  Im trying to create a disk of 20 GB with adapter free with eagerzeroedthick on my internal called storage, (no subdirectory).

  The file system is THAT VMFS 3.33 maximum file size is 256 GB.  The block size is 1 MB.  If it is the block size that is the problem how can I easily change?

  It's in a laboratory, not a production environment.  I need the flag eagerzeroedthick like Im trying to create a passive active cluster node MSCS 2 on a single physical node with 2 machines VMS.

  Thank you.

  Mike.

  If you use the free version of ESXi (U4 and later versions), access to tools like the VIMA API are read-only.

  -Matt

  VCP, vExpert, Unix Geek

• R12 rapidwiz error on node2 - AC-00002: error: unable to create the log file

  Over multiple node R12 on Enterprise Linux 4 installation fees. below error is encountered on node2
  
  AC-00002: error: unable to create the log file
  The installation was successful on the database node and the main node of the Application. On the primary Application node only ' lot
  
  Treatment services are enabled.
  
  However, when installing on the application additional node the rapidwiz is errors
  
  "AC-00002: error: unable to create the log file - $INST_TOP/$CONTEXT_NAME/logs/12202114.log.
  Exception in thread "AWT-EventQueue-0" java.lang.RuntimeException: AC-00002: unable to create the log file.
  $INST_TOP/$CONTEXT_NAME/logs/12202114.log
  
  I tried to install several times but every time it failed with the same message
  
  I think that the reason for the failure:
  
  I am writing on a mounted NFS on Node2. If I access a NFS mount from one server other than of its origin, the root of the application server user is considered person not the user.
  I checked this by pressing a file being logged in as root:
  
  -rw - r - r - 1 person person 0 20 Dec 10:59 abc
  
  I mounted node2 successfully using
  Mount-t nfs nas1: / erparch /erparch
  
  Rapidwiz version is 12.0.0.20
  
  What are the steps to take in order to proceed with the installation on the second node.

  user10126380 wrote:
  I think that the reason for the failure:

  I am writing on a mounted NFS on Node2. If I access a NFS mount from one server other than of its origin, the root of the application server user is considered person not the user.
  I checked this by pressing a file being logged in as root:

  -rw - r - r - 1 person person 0 20 Dec 10:59 abc

  I think you've correctly identified the source of your problem. By default, the NFS mounts are usually created with the 'root_squash' option, where the user root on a remote system creates its files as the anonymous user ('nobody' in most cases) on the exported NFS volume. It is usually a good practical security; However, in your case, you need to export the NFS volume with no_root_squash to allow the user root on Node2 to create files as expected when you run RapidWiz. Once installation is complete, you should be able to go back to using the default root_squash option, as the following files in the filesystem level of demand will be created by non-root users.

  Your system administrators may not be happy with the idea of an export of no_root_squash, and I wouldn't blame them. :-) If there is dispute, make sure that they understand that it is only for the duration of the installation of the EBS, and she can (and should) be powered once the installation is complete and verified to work.

  These two articles offer a brief explanation of the purpose and value of the NFS mount root_squash/no_root_squash export options.

  Kind regards

  John P.
  http://only4left.jpiwowar.com

  Published by: jpiwowar on December 21, 2009 21:38

• import problem ORA-01658: unable to create the STARTING point for the segment in your

  I created the above tablespace
  
  create tablespace SAMPLEDATA
  DataFile ' / u01/app/oracle/oradata/sample/sampledata01.dbf' size 50 M autoextend on next 10 M maxsize unlimited
  logging
  Local extended management
  segment space management auto
  Flashback on;
  
  create SAMPLE user identified by usrmringnew
  SAMPLEDATA default tablespace
  tablespace temporary temp;
  
  
  Import from 9 to 10r2
  
  IMP fromuser = touser = sample indexfile=/home/oracle/import/production/export/import_productionddl_20081007.log file=/home/oracle/import/production/export/production_export_20081007.dmp log=/home/oracle/import/production/export/production_import_20081007.log production system
  
  Unfortunately, it gives the error
  
  ORA-01658: unable to create the measure INITIAL segment in tablespace
  
  could someone kindly help me on this?
  
  Thank you very much!

  Hello

  As you can see, your data file specifications need to increase of 10 M, but your file system has only 3.7 M of available, that is why the server is unable to increase the size and you get this error message.

  Solution - you can use one of following:

  1. move the data file to a point of editing with sufficient space.
  2 - Add a new data file for the tablespace and host this data on a new mount point file with sufficient space.

  Published by: sanjayIndia on October 8, 2008 09:02

• Unable to create the region with tabs

  Hello
  http://www.danielmcghan.us/2009/07/jQuery-tabs-get-while-they-hot.html
  
  I followed the steps given above link.
  
  1.I download a file jquery - 1.2.3.pack [1] I copied to the location \oracle_home\oracle\product\apex\images\javascript
  
  I added this file in my page template.
  "< script type =" text/javascript"src="\oracle_home\oracle\product\apex\images\javascript\jquery-1[1].2.3.pack.js "> < / script >
  
  and I followed the same steps, but I am unable to proffer tabs.
  
  Please suggest some clear steps so everyone alread has worked on this example.
  
  
  Thank you
  Nr

  Hello

  In the example on page 17 app you can see region 1 of the article. Change this region, and you can see header region code

  
  
  Section 1
  Section 2
  Section 3
  
  
  

  Generates tabs.

  If change you it as

  
  
  Section 1
  Section 2
  Section 3
  YOUR NEW TAB CONTENT
  
  
  
  

  Then change the region 3 region Footer Section to be