Unable to display the users in the administration tool - identity, OBIEE 11 G

Similar Questions

• How can I remove the Administrative Tools, network connections, printers & Fax and scanners and cameras my desktop icons?

  Recently, I installed a trial version of Tune Up Utilities 2009. During one of the scans/tune-ups, he gave me the option to display the Administrative Tools, network connections, printers & Fax and Scanners & cameras icons on my desktop. I checked ok, however, now, I think it's too crowded in my office and you want to remove them... right on the desktop, not everywhere else they are located. I tried everything I know to remove them without success. Anyone knows where is the menu option to display on the desktop so I can uncheck or choose Delete? I don't want to have to change all the .ini files or .bat to because I'm afraid I don't do it correctly and create other problems.

  Hello tellis1230

  I don't know what you have tried, but have a look here

  Right-click Desktop-desktop/properties/Office/Customization

  Uncheck what you don't want

  .

• Unable to display the remote folder: the remote folder F:/wamp/www / "MYWEBSITENAME" / is not accessible or does not exist.

  In CS4, all of a sudden, I get the error "unable to display the remote folder: the remote folder F:/wamp/www /"MYWEBSITENAME"/ is not accessible or does not exist.»

  I'm in Manage Sites and test the file in the remote folder and it says "Dreamweaver connected to your web service successfully.

  I have not changed anything.  I had this once before a few years ago and just copied on the site of a new name and that fixed it, but it does not for the moment.

  Help.   Any ideas?  Thank you

  When you click the expand button in your files window, whose icon is selected in the upper part?

  

  The middle one is the test server (list of lightning bolt), if you try to download, you will need to switch to the remote server (standard search bullet list icon).

  If you do not have a local server running on a drive of F, and you try to put it on the test server, you will get an error saying: there is no. Is it happening?

  If you do not have a local server running on your F drive, remove the test server info, it is not necessary.

• Unable to display the results of a detailed report or the results of a questionnaire which is inbedded in the project.  I checked the preferences of quiz and enabled for the draft declaration.  I use SCORM 1.2.  My LMS is not listed (MCN) and so I chose '

  Unable to display the results of a detailed report or the results of a questionnaire in a bed within the project.  I checked the preferences of quiz and enabled for the draft declaration.  I use SCORM 1.2.  My LMS is not listed (MCN) and so I chose 'other LMS standard.  Any ideas on why I see the results?

  Publish your SCORM SCORM Cloud and test if it will show you the results you want.  If so, then your problem is with your LMS.  If this is not your problem may be due to something in the settings of your current project.  Eliminate one thing at a time.

• location is not available when I try to open the administration tool...

  "C:\ProgramData\Microsoft\Start Menu\Programs\Administrative of Directors made reference to a location that is not available" Please help me I cannot open the administration tool I use windows vista ultimate 32 bit...

  Hi dudex3eme,

  (a) what were the changes to the system between the time where everything has worked, and when you noticed the problem?

  (b) do you use the computer as an administrator?

  Step 1: Power the computer as an administrator and check if the problem persists

  Step 2: You can check with another user account, if you do not have a different user account, you will need to create a (see link below)

  Create-a-user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Let us know if this works very well as expected

  If the problem persists,

  Step 3: A scanner online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I be familiar with the administration tools?

  Hi all

  In this path "Control Panel\All Control Panel Items\Administrative Tools" and in the Administrative Tools folder, there are some elements, for example, Services. How can I be familiar with them? When should I use? I want to fully understand them and their works. How to get the goal it please?

  Thanks in advance.

  Original title: administrative tools

  Hello

  Experimentation and education. There are still a lot of good books out there on
  Windows 7. And Windows 7 administration tools are very similar to those of
  Window 8/8.1.

  Check with Microsoft Learning and their community and Forums

  Microsoft Learning
  http://www.Microsoft.com/learning/en/us/default.aspx

  Microsoft Learning - training and certification help (check with the regional Centre)
  http://www.Microsoft.com/learning/en/us/help.aspx

  Microsoft Learning - Community
  http://www.Microsoft.com/learning/en-us/community.aspx

  Born to learn - IT items & more
  http://borntolearn.mslearn.NET/BTL/b/default.aspx#fBid=ZVqwv2Ty0kS

  Born to learn Forums
  http://borntolearn.mslearn.NET/forums/f/15.aspx#fBid=KWE1r1ploI9

  Windows - help
  http://Windows.Microsoft.com/en-us/Windows/support#1TC=Windows-8

  Knowledge Base
  http://support.Microsoft.com/search/?adv=1&spid=global

  Windows 7 Solution Center - there are options and a "Get live help.
  http://support.Microsoft.com/ph/14019

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• SPR in OBIEE is different from that of the administration tool

  I have edited the RPD (new.rpd) and deploy it to the server. When I opened OBIEE, I got the new area of topic, but when I change online the RPD in the administration tool, the RPD was the old one (SampleAppLite), so I can't edit online the RPD. Can I know how to change online the new RPD? I want to change online the new RPD. Why has this happened? Thanks master

  Dear Sir

  I think you're wrong to choose the port. try to watch your em, then go in Business Intelligence - coreapplication - availability - process tab. I guess you are using 11g, but if you use 10g. simply stick to the word of availability, you can find this in Capacity Management tab. Then look at the BI server, check the host and port. Start making your DSN from that. I hope it helps

  Satya

• I've updated today on Adobe Indesign CC 2015, and now I am unable to see the folio tools in indesign, any help, thanks Graeme

  I've updated today on Adobe Indesign CC 2015, and now I am unable to see the folio tools in Indesign, very urgent, Graeme Cheers

  2015 inDesign only supports DPS 2015, not the earlier version of the DPS. To use DPS with the Folio Builder Panel, you must run 2014 CC InDesign, InDesign CC or InDesign CS6. You can run multiple versions of InDesign on the same machine.

• How to have the Administration tool in English?

  Hello
  I have my windows installed in Portuguese. When I install the administration tool, it comes out in Portuguese (menus, etc.). I wish it were in English, documentation, forum, etc. are in English, and we have used words like 'join', etc... and not the translation.
  I did some experiments with the settings windows regional / regional, but always without success.
  
  Pls clues?
  TXS.
  Antonio

  Do you have what version of obiee installed? If you have installed 11g, there is a bug, which does not allow to choose the language for the installation and always default language based on the language of the OS. See ( Bug 12824489: OBIEE ADMIN TOOL INSTALL DON'T REQUEST NO LANGUAGE).

• How to install the administration tool of the OSM in Oracle Solaris 10?

  Hi all.
  I have one question,
  I know that I can install the OSM in Oracle Solaris 10, but, I can install the administration tool of the OSM in the same 'Oracle Solaris 10' operating system, or this must be installed on Windows?
  
  Thanks in advance.
  Lucas.

  The OSM administrator can be installed on Windows only.

• Unable to get the administrator account, receive the error such as the user profile service failed logon. User profile could not be loaded. "

  Original title: "the user profile service has no logon. User profile could not be loaded"and admin password will not work

  I had this problem came several times before but it always correct itself without any intervention from myself. Now, even after restarting the computer several times I can not directly connect to my main Administrator profile. I have another profile without administrative privileges already done so I could at least use my computer, but only with limited permissions. When I try to do something to solve the problem, as the registry change, I'm prompted to enter the administrator password. I enter the password and the alert box goes, and nothing happens. Enter the password seems doing nothing, except the aknowledge the password is correct (it warns me when I entered a wrong password so I know it's no doubt receiving data). DOoes anyone know how to fix this? The computer works relatively well recently and have no idea of what decoration could have happened to cause such a mistake that bothers.

  Hello

  This worked for me, try allowing the default Administrator account, the steps are in the following link
  http://somanytips.com/Windows-Vista7-the-user-profile-service-failed-the-logon-user-profile-cannot-be-loaded/
  I hope this will help!

• Unable to get the administrator account.

  I changed my password (without the backup disk) and now I can't access my account admin or make updates.  Is it possible that I can get the password set to day for I can put?

  Syed, is simply not true. Vista (and Windows 7) has means legitimate integrated for the OP to enter its system, which do not require a password for third-party software cracking and therefore who works against the rules of the forum, Ms.

  "Connieongeek" - you can change your password to something that you remember another administrative user account. If you had only an administrative user account and you have forgotten the password, all is not lost. You can then follow the general recommendations for implementing user accounts in Vista that I will give you at the end of this post.

  All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [press Enter]
  NET user [insert here the name of your user account] [insert the new password of user as 1234 here] [press Enter]

  [Note: do not enter the brackets!]

  Remove the installation DVD and restart the computer. Now, you will be able to connect to your user account by using the password that you set; for example, 1234.

  If you do not have a Vista installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair Vista (not a system recovery!) system in the diagnostic menu. This menu of diagnosis is the same one where you can choose Safe Mode. Get to this menu by repeatedly pressing the F8 key as the computer starts. If you do not have this option, you can make a bootable Vista file repair DVD in this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. You will need to use third-party burning software such as Nero, Roxio or the free ImgBurn (http://www.imgburn.com ) to burn the image .iso image file, not in the form of data.

  Once you have fixed things, log on to the additional administrative account you will be made by the suggestions below and disable the administrator account integrated yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult.  It is not impossible to activate the built-in administrator to rescue things, but there may be more that you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  MS - MVP - Elephant Boy computers - don't panic!

• Unable to display the output of a concurrent program

  Dear members,
  
  I use Oracle R12.1.3 Vision Instance.
  
  I ran the program create accounting. When I click on the button to display output, the browser gets displayed and gets immediately closed. I'm unable to view the output.
  
  Can someone help me please to solve this issue?
  
  Thanks in advance.
  
  Kind regards.

  I faced this problem once. That's the problem with the settings of Internet Explorer.
  Check in the settings of IE-> tools - > Internet Options-> Security tab-> the zone (Intranet, for the most part)-> enable downloads.

  By
  VAMSi

• Unable to display the entire contents of the CF query return the result on my Web see page

  Hello

  I'm trying to extract data from a table (project_reports), which is to have a column of type CLOB (details) inside data.

  Details this column takes a huge amount of data in it.

  And I use the code to retrieve and display the data on my CF Web page below.

  
  < cfquery name = "getReport" datasource = "myDS" >
  Select details in project_reports where project = 54516
  < / cfquery >

  < cfoutput query = "getReport" > #getReport.details # < / cfoutput >

  
  ColdFusion is able to process and display a quantity limited data, but not the full data.
  I want to retrieve and display all of the data using ColdFusion.
  Can someone help me on this? Thanks in advance.

  Kind regards
  Jacques.

  Mamidela wrote:

  ColdFusion is able to treat & display a quantity limited data, but not the full data.

  Check the data source settings in the CF administrator. Make sure that the CLOB parameter (enable Long Text Retrieval) is checked.  When this box is _not_ checked, CF retrieves only the 64000 bytes.

• Often when I return to my home page, I get this message: unable to display the page of the page you are looking for is currently unavailable.

  The only time where I get this message "cannot display the page of the page you are looking for is currently unavailable ', is when I come back to my Yahoo home page after visiting other websites and click"home. " My SSL settings are correct; I tried to clear my cache, log out and go back online, repaired broken clusters, etc. I'm out of ideas.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!