Unable to find or create the font...

Similar Questions

• Cannot find or create the font "arial unicode ms" error message

  I get this when I try to read a PDF on the Web.  I have another Win 7 machine and it read fine with Adobe Reader 9.  Machine with an error is a brand new dell Vostro Win 7 Pro 64-bit.  I have Adobe Reader X installed on the Dell printer.  I also tried version 9 on the new Dell and get the same message.  I'm puzzled.

  Any thoughts?

  LemonDropKids

  You have the Arial Unicode font on your computer (look in the fonts Control Panel).

• Error ERR-1002 unable to find item for the 'ID' element ID in the application

  Hello world
  
  I'm new to APEX and I came across this error for the first time. I have a page with a classic report in it, and I want to create a link to one of the columns in the report (column ID) to another page with a classic report in it. So when I click on, say, ID 118, I want to be sent to another page and don't see ID 118 information.
  After you create the link in the column, I get the error message when I run the application:
  
  Error ERR-1002 unable to find item for the 'ID' element ID in the application
  
  I tried to create a link from one report to the other before and it worked fine.
  
  Thank you!
  
  P.S. I use APEX 3.2

  Then you must create an item called ID on your page 2 (hidden make) and the link will pass the value of the ID of the line picked up on this hidden item. Now in page 2 make your report filter query on id = P2_ID or another name that you use...

  Hope this helps,
  His

• Why is-Visa Interactive Control unable to find or load the visa library

  I'm using LabVIEW 8.5.1.  I recently installed driver VISA tektronix to connect with one of their products.  That has proved to be a bad idea.  I've uninstalled it one then installed VISA460, but when I try to write a labVIEW driver that communicates via RS232 or USB, I get this error:

  LabVIEW: (Hex 0xBFFF009E) VISA or a library of code required by VISA impossible situated loaded.  This is usually due to a required driver is not installed on the system.
  =========================
  VISA: (Hex 0xBFFF009E) a code library required by VISA impossible located or loaded.

  When you try to run an interactive control Visa I get an error saying unable to find or load the visa library.  Is there anything else I need to download?  Any help would be great. Thank you.

  I had already done this, but had no luck.  However, I could be back up and running using Msiblast.  This is a great little program.  So, if anyone has problems in the future, simply download Msiblast and delete everything has VISA inside and then run the Setup program OR Visa.  Thanks for the help.

• Impossible to download and install Adobe Flash Player. The program says that it installed successfully but unable to find it on the computer

  Original title: I downloaed and installed Adobe Flash Player but can not find

  I need Adobe Flash Player 9.0.125 in order to read a perticular website. I downloaded and installed the latest version of Flash Player. The program said I installed successfully, but I away find it on my computer and the site always told I need. What did I do wrong?

  Hey Papi Williams,

  Welcome to the Microsoft Community Forum.

  From the description of the problem, it seems that you are unable to download and install the latest version of Adobe flash player on your computer. I understand the inconvenience.

  1. What version of Adobe flash player you have downloaded?
  2. What Web browser are you using to view the website?
  3. Which site did you download Adobe Flash Player?

  Let us try the following steps and check if it helps to solve the problem.

  You can read this article and check if the Flash Player is installed correctly on the computer.

  Flash Player help / find the version

  http://helpx.Adobe.com/Flash-Player/KB/find-version-Flash-Player.html

  The latest version of Adobe Flash Player is Adobe Flash Player 11.5.502.135 and you can download it from Adobe's official website: http://get.adobe.com/flashplayer/. If you have a lower version of adobe flash player installed on your computer, try the following steps to uninstall and reinstall the latest version.

   

  Method 1: first of all, use this utility to uninstall the existing flash player http://kb2.Adobe.com/CPS/141/tn_14157.html

   

  Method 2: Reinstall Adobe Flash Player
  Once you have uninstalled properly, and then try to install it from the following link. The latest version of Adobe Flash Player is Adobe Flash Player 11.5.502.135 and you can download it from Adobe's official website: http://get.adobe.com/flashplayer/

  You can also see the link listed here for Flash Player, games, video or audio does not work in Windows questions.
  http://kb2.Adobe.com/CPS/837/cpsid_83715.html

  I hope that helps! For any help about Windows, you can still post on the Microsoft Community Forum.

• BlackBerry Z10 unable to find contacts in the Contact application

  Hello

  I have been using BlackBerry Z10 for a year. I was very satisfied with the performance of the device. I am indeed! but do not know what happening sudenly I'm unable to find any contact which is already available in the contacts app (NOTE: I do not use 3rd party app to store my contacts)

  Software version: version of the OS installed is BB 10 OS 10.3.1.1779

  This is the setting I made on my device:

  Automatically merge Contcts - WE

  Sort contacts by name

  View the contact as -firstly, the last

  Show the accounts in the list of contacts:

  BBM contacts

  BBM contacts video

  LinkedIn

  Facebook

  Twitter

  Outlook.com

  Contacts from the SIM card

  BBLink

  Search using cloud is UNCHECKED.

  Please do the needful.

  Thank you

  Nishant

  Wait... you mean you installed an update of the OS? And after that, this behavior started? If Yes, then the most common thing to do after an update which translates questions is to perform a reload of the OS. Sometimes the update process have errors and others... with a reload often cure the problems.

  Official methods, which will be controlled as to what exact OS versions are available:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-10-functions-and/how-to-reload-your-Blackberry10-O...

  Non-official methods, which are cleaner and allow you to choose a version of the OS that maybe your carrier (or anyone they control your offers) delays in approval:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-10-OS-device-software/upgrading-OS10-devices-using...
  • http://forums.CrackBerry.com/BB10-leaked-beta-OS-f395/BB10-OS-archive-943672/

  Of course, before you start this, you want a good backup link, a manual copy of the memory of your device to your PC and complete documentation of your configuration (identification information of account, adding applications, configurations, etc.). Sometimes, restoring a backup returns unit corruption even, must be eliminated and reconfiguration from scratch can solve that.

  Good luck!

• How to find which create the table?

  Let's say I have a user named IMSDBA, and many users have IMSDBA privilege account.
  They can log on using that account and do some operations under this scheme.
  
  And someday, someone has created a table under the scheme. So I wonder if it is possible to know who actually created this table?
  
  PS: Each user who can log in as IMSDBA has corresponding Emplyee ID and address related to specific PC.
  
  Any ideas would be highly appreciated :-)
  Thanks in advance!
  
  Published by: PhoenixBai on September 17, 2009 10:40

  Now, if you are using Oracle audit to audit things like CREATE TABLE for IMSDBA, SYS. AUD$ seize among other things, the USERHOST and TERMINAL. Assuming you're only worried about the direct connections, not of three applications at several levels, this should give you the information you need determine which machine was used and, therefore, that the user. In hindsight, if your database is in ARCHIVELOG mode and you have logs archived in time of creating the table, you can use LogMiner to get this information as well.

  Of course, standard safety advice would be that each user has a separate Oracle account that they use to simplify the task of checking who did what.

  Justin

• Where to find and install the font "Arial" on Windows 7?

  Original title: INEED TO INSTALL THE "ARIAL" FONT - STYLE "REGULAR" OF MY DISC of INSTALLATION of WINDOWS 7
  
  I SPEAR THE SOFTWARE THAT NEEDS REGULAR ARIAL FONT.  THREE STYLES OF ARIAL SHOW AS BEING INSTALLED ON MY MACHINE, BUT IS NOT REGULAR. MSWEBSITE SAID IT IS ON THE WINDOWS 7 DISK, HOW TO FIND AND INSTALL IT.  Thank you.

  Go to control panel > display large icons > fonts...

  If you see "Arial" in the list, it is the regular version of Arial as far as the disc of Windows 7 is concerned and you have already...

  However, others have also asked this question and, apparently, this download of fonts should solve your problem...

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=16083

• After buying a new printer Windows Vista is unable to find it on the network.

  original title: adding Vista network printer

  I am running Windows Vista on my laptop and connect to a network home wireless. I replaced my old printer (which I could access the network) with a new one. I tried adding a printer (using the guests) but Vista could not find the printer. I can use Explorer via the wireless network, but it still can't find the printer. What I am doing wrong?

  Dave!

  Hi Dave,.

  1. You receive an error message when you add the printer?
  2. What is the number and model of the printer?
  3. You have security software installed on the computer?

  Try the following steps to add the network printer on the computer.

  (a) printers open by clicking Start , clicking Control Panel, hardware and soundand then click Printers.

  (b) click on Add a printer.

  (c) in the Add Printer Wizard, select Add a network, wireless or Bluetooth printer.

  (d) in the list of available printers, select the one you want to use, and then click Next. If your computer is connected to a network, only printers listed in Active Directory for your domain are displayed in the list.

  (e) If prompted, install the printer driver on your computer. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (f) complete the additional steps in the wizard and then click Finish.

  Add or remove a printer

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

• I'm unable to find some of the panels in Dreamweaver, can anyone help?

  We seem to run out of signs in our version of CS6 schools. Is there a way to get this back?

  I'm sorry to say CS6 panels are not the same as those described in many creative cloud tutorials.  This disturbs many people.  What version and build # DW don't you have?  It's under help > about Dreamweaver.

  Nancy O.

• Unable to find layout in the section of the insert.

  Hi, I have donwloaded version track Dreamweaver cs6 and it not a not the section layout to draw an AP Div, can anyone help please?

  You probably have DW CC and not CS6 - two different products.

  APDivs have been removed from Dreamweaver CC because they were never intended to be used as main page layout tool.   The people who have them use invariably had problems with the way their pages rendered on multiple devices.  Fortunately, Adobe has finally decided to remove the new structure of the APDivs Panel.

  Nancy O.

• How to find the owner of the user or who created the user?

  Hi all
  
  I want to know owner of user or users who created?
  
  example:
  system created the test user.
  test has created the user xyz.
  
  So I want to know who created xyz?
  
  Thanks in advance,
  Sandeep.

  You can not find who created the user unless you enable the audit of the database or write a trigger (CREATE ddl event-based) that will track the session information of the user who executes a command from the user to CREATE.

• How to find information from the Team administrator

  Hello

  We try to make changes to the composition of our team, but we are unable to find information on the search for the connection that has been created for the administrator of our team. We hoped to find additional information on how to locate this information, or how to assign the administrator account on the team to someone else.

  Thank you

  -Jim

  Hi Jim,.

  In addition, you can refer to the CC for teams FAQ: Creative cloud for teams FAQ: How can I manage my account teams?

  Hope that helps!

  Kind regards

  Sheena

• How to set the font size on El Cap?  Firefox crashed and now my font size is about 10

  I have two problems:

  (1) menu bars and the task to keep endangered.

  (2) after Forefox crashed, my font size is tiny. I went to the System Prefs, display and general and can't find anything on the font size setting.  The font size is v smallon my tabs, although ' I can adjust what I am writing.

  What happened and what can do?

  Thank you!

  MacBook Pro El Cap.  10.11.4

  Do not forget that your Firefox is uptodate.

  Clear your cache and history as well.

  What about fonts:

  In Firefox 46 in the preferences search content and try to change.

  Note that in the content there is also a step forward.

  and the part that has a checkbox

  'allow pages to choose their own fonts '.

  Experience here.

  

• I'm unable to find the missing drivers on my device manager.

  OT: Re: lack of pilots.

  Hello

  I'm unable to find the missing drivers on my device manager. A unknown device watch. Other shows, like in the storage controllers. I checked Windows update, but it does not find the missing drivers. I don't have the drivers on my CD.

  Please download and run the display driver and download a copy of the report he produced on your OneDrive. To obtain a report all drivers Select Edition, select all followed by file, save selected items.
  http://www.NirSoft.NET/utils/DriverView.html

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode. The request for a copy of this file is additional to answer the question about the brand and the model. If the report is in one language other than English, please indicate the language.

  For assistance OneDrive see paragraph 9.3

  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm