Unable to focus TextInput enter data

Similar Questions

• Unable to save the 'Release Date' field in iTunes/Windows 12.4.0.119

  Unable to save the 'Release Date' field in iTunes/Windows 12.4.0.119

  I've just updated to 12.4.0.119 and can no longer add Release Date for a TV show.  When I go to "Get Info" and type the release Date, it allows me to enter a valid date, but as soon as I have the label off the field it emerges by itself.  If I enter the date and click on 'Ok', the date is not recorded.

  I had this same problem Windows 10. Just tested it on iTunes/Mac 12.4.0.119 - this platform will not yet you allow to select the release Date field to make an entry.

  It is a major issue, as AppleTV allow no sorting replacing television programs other than by Release Date.

• Tax installed Turbo (Canada Version) Impossible to enter data in the form of sheets T

  I called Turbotax 3 times & downloaded back to etc, changed the display settings, etc.

  Unable to enter data into forms Tslip

  TurboTax says its a problem in which Microsoft should solve

  Hi SRE1937,

  1. what exactly happens when you enter the data?

  2. you receive messages or error codes?

  You can try to uninstall and reinstall the software TurboTax and check.

  Check out the link to uninstall a program:

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  You can also check in the observer of events for errors and information relating to what is causing the problems.

  Check out the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  Regarding formats, you should contact TurboTax and Microsoft cannot help in this case.

  Check the link for TurboxTax support:

  https://TtlC.Intuit.com/app/full_page

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer.

• Impossible to enter data to Parent - Essbase BSO Cube level member

  Hello
  
  I'm unable to enter data on the form in line against a member parent in the entity dimension. The Web form gets classified off when I select the parent member (level 1) level enter store information of text (from the account Dimension)
  
  So my selection of page elements is the entity dimension and my lines are account codes (account dimension) and the column is a dimension of the year. I can enter and save data on the selection of the level 0 member, but when I select its parent, cells member is listed on.
  
  I understand that it is not advisable to enter data at zero level members. Users would still like to store textual information about the parent member. According to my understanding, BSO Cubes should allow us to enter data into the zero-level member.
  
  Kindly advice.
  
  Thank you
  
  Thomas
  
  Cube Essbase BSO
  Dimension feature - Sparse - element of the Web Form Page
  Account the Dimension - as always Dense - rows on the Web Form
  Year Dimension - Sparse - column on the Web form

  Yes, "Ascending" you cannot enter data at a higher level. You must do as a target version, then you can enter any level of data.
  You can also create several versions and make any version as 'target' version and enter the data for the target version.

• How to restrict the user to enter data into the PLUGS DO

  Hello
  
  I textinput in my page, I have to restrict the user to enter the data covers only.
  
  can someone help me on this.
  
  Knockaert

  Please go through this site.

  http://oracleanil.blogspot.com/2010/10/restrict-user-to-enter-data-in-caps.html

  Concerning
  Meher Irk

• difficult to manually enter data into health

  with the last update apple has made it very difficult manually enter data into health app... I'm not talking about sugar in the blood or the weights every day entered manually as my personal info that does not normally change

  Launch the health application and then press update medical ID.

  For example, on your birthday, tap the box just to the right of the birth Date of edit.

  Use the app on your iPhone or iPod touch - Apple Support health

• Cannot enter data on Web sites, can connect and discover, but not enter data

  I use Firefox for many years without any problems, but just recently, although I can connect to any site and discover anything, I can't enter data. For example if I type a comment on Facebook, I can't post, nothing happens. Similarly, I can make payments online through my line on the Bank's website. In the meantime, I use IE 11.0 instead of 35.0 Firefox but it's a nuisance. Any idea what could be the cause?

  Very strange, the problem is now gone, I can do messages and payments without problems that I mentioned at the outset. Only difference I can see, is that I now use Firefox 35.0.1. In any case, my problem disappeared, so I won't spend much time on development why it happened.
  However, thanks for the suggestion

• How can I enter data apple fitness?  I swim and take aerobics classes.  I don't wear my Apple Watch during this operation.

  How can I enter data of fitness on my Apple Watch?  I swim and take water aerobics classes and not wear my watch in the water.

  Hello

  It is not currently possible to enter data of fitness on Apple Watch.

  Health and fitness data Apple Watch, iPhone and any other source are rather grouped by health on your iPhone app. Combined data is reflected in the health app charts (which can be added to the dashboard), which adjust the results to avoid any double counting of data from different sources.

  To add a workout that has not been registered by your watch, iPhone, or other existing data source:

  -On your iPhone, in the application of health (icon: red heart on a white background), go to: data on health (tab) > Fitness > training > add a data Point > enter the result of your workout.

  Activity types available when you add a workout currently including swimming, but do not include aerobics (other can be used instead).

• Comboxbox in the long term, already have the data case not able enter data same if U

  COMBOX Box is used to enter data at run time. "Allow Undefined strings" option enabled.

  Enter a given: "Abcde", it is stored in the list.

  Enter the data another: "ABcde" labview takes these data as "Abcde", its not to recognize the case-sensitive characters.

  Any suggestions or solutions to over come this problem.

  shrekt response illustrates the problem...

  The solution is to do a property node on the drop-down list box, select CaseSensitivePopup, and the value is false.

  Rod.

• enter data in a 2D game table

  Hi all

  I am trying to enter data that is measured in real time in a set table size (I need to then put the data collected in a 3-d chart).

  The problem is when the data arrives, it can be read easily and placed in a 1 d table. But trying to input into a 2D array which index itself after reaching the last column of the table is rather difficult.

  I have attached the file that I use, but you won't be able to run it without the equipment that I use.

  I have attached a few images of the methods I've used and the results I get.

  2 me trying to find a way to index itself by chnaging indicates the line on which imputed data. However when the index line is chnaged during operation all data are transferred in before it the line, leaving the first line empty (as illustrated in 2 when the index changes)

  I did a variety of methods and looked online, but that's as close as I got.

  Thanks for any help,

  ALEXZ

  Pre-create the table outside the loop and simply divide the iteration of the loop by the number of columns and use the quotient and the remainder to the index in the array.

• Write delay failed unable to save all the data for the file $Mft

  Have a frustrating problem.  Help is greatly appreciated.  Learned the hard way and lost a dwg important issue which was unrecoverable.  Bought a new drive external hard seagate.  Could not back up the entire system with software pre-installed.  Download acronis true image home 2011.  Tried to backup system.  Receive error when trying to backup messages; 'Delay to failure of Scripture; Reading of the sector; Windows was unable to save all the data for the file $Mft. The data has been lost.  Have tried many fixes.  Unable to disable write caching method (grayed out / unclickable).  Played regedit 'EnableOplocks' is not listed to select.  Attempted to run microsoft 'fix it' and got the blue screen of death.  Short hair out of my head.  Suggestions appreciated.

  I don't know where Microsoft 'Technical support engineers' get their information.

  Write caching without a doubt "does apply to external hard drives", but it is usually disabled to prevent to sort the problem you are experiencing.

  I've seen several positions reporting to the same question that you do.  All of these positions were with SATA drives.  Is your Seagate eSATA drive?

  The disc is recognized as an external drive in Device Manager?  In Device Manager, go to the drive properties dialog box and click the policies tab.  An external drive should have two options: "Optimize for quick removal" and "Optimize for performance".  An internal hard drive shows the options as gray (with 'performance' selected), but there should also be a checkbox "Enable disk write cache" under the second option.

  What shows in your policies tab?

  If I understand correctly, "writeback" or "write behind" is implemented by disc material or its pilot.  If the option is not available on the drive properties > policies tab, I would suggest to contact Seagate support.

• Each system restore try results in the message "unable to restore to that date.

  original title: restore the system to a date in April.

  I have problems w/messages saying: I have a pop up blacker. Checked and pop-up blocker disabled.  My tools bar ie file, tools, etc. disappeared.  Try to do system restore to see if it will fix the problems, but each system restore try results in the message "Unable to restore to this date", still

  I use dates that are "BOLD" and should be allowed to use. What can I do?

  You may be able to substitute the blocker by holding down your Ctrl key.

  Sometimes, the restoration of the system may be blocked by other software... especially of virus scanners.

  Might be interesting to try to run Safe Mode system restore.

  How to start safe mode in Windows XP
  http://bertk.MVPs.org/html/SafeMode.html (315222) a Description of the Safe Mode
  Boot into Windows XP options
  http://support.Microsoft.com/?kbid=315222

• I cannot enter data in any of my spreadsheets Excel or Word online.

  Initially I had MicroSoft Excel and Word 2010 Starter Version came with my PC.  Later, I tried MicroSoft Home edition trial.  The trial period has expired, and I can't enter data into one of my documents Word or Excel spreadsheets.  So, in desperation I chose to buy the Home and Business 2010 package, but when I try to order it, and press continue to purchase my browser indicates that this page is not available.  Now I'm stuck with no working version of office and no way to upgrade.  How can I return the version began Office 2010?

  Thank you
  John

  You are using the trial of Office and not Office Starter versions, programs & features uninstall MS Office, reboot, and then repair Office Starter

  http://h10025.www1.HP.com/ewfrf/wc/document?CC=UK&LC=en&DLC=en&docName=c02981221#N272

• Why PL/SQL procedures does not allow users to enter data dynamically at run time?

  Dear all,

  I tried to do a procedure that will search for a group of approval in our database that matches.

  (1) the number of levels

  (2) the number of users by each level

  (3) the id of users by level

  entered by the user.

  I tried various methods to receive user input dynamically at run time, but in vain.

  Finally finished my procedure allowing the user to enter the parameters and then executes the procedure, to which these parameters are passed as arguments. (1 variable for the number of levels and 2 userdefinedarrays with the number of users by level and level respectively)

  Why PL/SQL procedures does not allow users to enter data dynamically at run time?

  Thanks in advance,

  Séverine Suresh

  HEY, Sebastian,

  3035408 wrote:

  Hello Sir,

  My question is that if I'm going to say, the number of levels 5, is there any way by which, at runtime, the procedure prompts me to enter at the start of the number of users per level. Now as soon as I get the number of users per level can I do the procedure ask me to enter the nicknames of the members of each level. I mean, something like a invite.

  Thank you

  Séverine Suresh

  There is no way to do it in SQL or PL/SQL, because not SQL PL/SQL is a way to get user input.  User interaction is a job for your front end, like Zlatko tool suggested in response to #5.  If your front end tool is SQL * Plus, you can use the substtitution variables, as Jarkko showed in response #6.

• Why the focus is on data read only Alta UI app samples / videos but not on data entry / change app / video samples?

  Mr President.

  When I go on YouTube or Alta models of sample I only found applications out there or videos but very little on how to enter data or change data or video applications.

  I want to build beautiful form of data entry, but I found very little advice and examples.

  Me not very imaginative, so I need some samples to build this seizure data forms or data entry tables.

  All samples build in the shoes of Alta UI please.

  Concerning

  Alta UI has nothing to do with the CRUD.

  As a simple goolge Let me google that you will give you plenty of samples.

  Timo