Impossible to enter data to Parent - Essbase BSO Cube level member

Similar Questions

• Tax installed Turbo (Canada Version) Impossible to enter data in the form of sheets T

  I called Turbotax 3 times & downloaded back to etc, changed the display settings, etc.

  Unable to enter data into forms Tslip

  TurboTax says its a problem in which Microsoft should solve

  Hi SRE1937,

  1. what exactly happens when you enter the data?

  2. you receive messages or error codes?

  You can try to uninstall and reinstall the software TurboTax and check.

  Check out the link to uninstall a program:

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  You can also check in the observer of events for errors and information relating to what is causing the problems.

  Check out the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  Regarding formats, you should contact TurboTax and Microsoft cannot help in this case.

  Check the link for TurboxTax support:

  https://TtlC.Intuit.com/app/full_page

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer.

• EPMA Essbase BSO cube with text measures

  Hello world
  I use Oracle EPM 11.1.2.2
  I'm trying to deploy a cube essbase BSO with EPMA text measures. The list of text EPMA must be created as a smartlist dimension. I even kept the Member account with the data type text as the first member of the level 0 of the account hierarchy.
  When deployment I'm gettting no error. In environmental assessments when I see the property of the Member, it shows as text, and also with the list of text attached to it. But when I insert data, data gets too loaded and gives no error.
  
  But when am through Smart View data display or HFR, the data are displayed as numbers and not as text.
  
  Kindly help.
  
  Kind regards
  SS

  Hello

  We met the same problem.
  Try the same essbase outline in cube Epma no if it works, then update at the request of EPMA and then deploy it and check again if this works.

  Thank you

• Calculation of the report in Essbase BSO cube

  I was hoping to get some ideas on how to implement a calculation of ratio in a cube Essbase BSO. To help explain the problem, in the sketch of the Sample.Basic, if I need to add a new Member to the dimension account called SalesMarketRatio and defined as sales of products in each market to Total sales of products in all markets.
  
  For example, SalesMarketRatio to 100-10 in New York would be sales-> 100-10 - > New York/sales-> 100-10-> market.
  For example, SalesMarketRatio for 100-20 in New York would be sales-> 100-20 - > New York/sales-> 100-20-> market.
  For example, SalesMarketRatio for 100-20 Florida is sales-> 100-20 - > Florida/sales-> 100-20-> market.
  
  I am open to that SalesMarketRatio is a member of Dynamics-calc, or stored and calculated via a calc script. In Sample.Basic, I am able to hardcode each combination but it is not an option in our real example since the scattered dimensions are huge with thousands of members each. Any ideas would be very appreciated. Thanks in advance.

  The formula could be as simple as:

  Sales/Sales->Market;
  

  The members of the product and the market 'numerator' are defined implicitly everywhere where you calculate / collect.

• Impossible to enter data in a new form...

  I created a form in LiveCycle from scratch by selecting new form. I have created several fields in the form, but when I click on preview PDF it does not allow me to enter any data or selected in the combo boxes. Any suggestions?  Thanks in advance for your help...

  Go to file > properties > preview and make sure that the type is in Interactive form.

  Steve

• Impossible to enter data to search on Google of Safari

  I have an intermittent problem data entry on the Google search, but power over other search engines.  I can type in the initial search on Google requirement but cannot redefine the search without turning off the Google page and start again.

  OS X El Captain version 10.11.2

  Cannot change the Google search criteria in Safari

• Sends data Essbase BSO

  Good afternoon

  Our group currently uses cubes essbase ASO to do their planning and forecasting.  Data bases are mainly intended to be warehouses of data, users just want to be able to send their data and consolidated it on the fly, as they get them.  They do not want to perform calculations of database (we had cubes BSO years ago, but the time calc were too - that's why we went to ASO).  It works well, except that as you know, ASO sending is notoriously slow--it's getting to be a little problem.  Now, we have recently moved to the latest version of Essbase / Smartview and I was told that if you partition a cube a cube ASO BSO, you can send data to the OSB, and through transparent access partition by ASO and ASO aggregate child values in the OSB for parent ASO values when users make their retrieves.  Is this true?  If so, this may be a game changer for us.  I tried to do this before, but still had to calc the BSO cube first.  Can someone check it for me?

  Thanks and sorry for being long-winded

  Oh Cameron the error you see is to listen to me. In fact, I was going to put in the comment that you made about adding complexity to the equation having to send to a database but to report each other as much as before 11.1.2.3, you wouldn't be able to see the ASO cube within planning. you will need to use an Essbase connection in Smart View to get there. He has certainly material environment.

  As I said also kind of each environment is differenent. in the case of the OP, there need test what its users do and see which is the faster of the two. There are some efficiency gains in the partitions to bring in data blocks. The amount of data users send, the closer the two could be equal or one overshadow the other.

• I rebooted my machine yesterday and now when it comes to the screen with the scroll bar it restarts in loop. Impossible to enter Safe Mode (arrives at crcdisk.sys and while it recharges) or normal startup mode.

  I restarted my machine yesterday and now when it comes to the screen with scrolling bar (think Night Rider), it restarts in loop.  Impossible to enter Safe Mode (arrives at crcdisk.sys and while it recharges) or normal startup mode.  Startup Repair is unable to repair.  She argues that the onus of a BadPatch.

  Startup Repair shows the following:

  Problem event name: StartupRepairV2
  Signature of the problem 01: external Media
  Signature of the problem 02: 6.0.6000.16386.6.0.6001.18000
  03:6 problem signature
  Signature of the 04:262148 problem
  Signature of the problem 05: BadPatch
  Signature of the 06 problem: BadPatch
  Signature of the problem 07:0
  Signature of issue 08: 1
  Signature of the problem 09: SystemRestore
  Signature of the problem 10:0
  OS version: 6.0.6000.2.0.0.256.1
  Locale ID: 1033

  Hello

  I hope you made redundant data backups as I suspect that the drive has failed. If a PC, you must
  remove all power and remove and reinstall all the cables (at both ends where possible), memory and cards. Do
  not tighten, effectively remove and replace them with care.

  Click here for the manufacturer of your hard drive and launch their diagnosis on your drive.

  By manufacturer diagnostic utilities
  http://www.techsupportforum.com/hardware-support/hard-drive-support/302602-hard-drive-diagnostic-utilities.html
  SpeedFan
  http://www.almico.com/sfdownload.php

  HD Tune
  http://www.hdtune.com/

  ----------------------------------------------

  If necessary:

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  No new chances.
  Rob - bicycle - Mark Twain said it is good.

• Cube Essbase BSO of EPMA

  Hi all

  I have a BSO essbase cube. The cube is refreshed from EPMA.

  It was working fine. But after a few changes (add members), the deployment has been abandoned with the following message.

  Error.

  Could not deploy Essbase cube.

  Caused by: failure of the Essbase cube dimension: (XX_MONTHS).

  Caused by: cannot complete the generation of data flow. Essbase Error (1007083): failure of generation of Dimension. Error code [1060056]. Check the server log file and the build dimension for possible additional info file.

  Could not deploy Essbase cube.

  Caused by: failure of the Essbase cube dimension: (XX_MONTHS).

  Caused by: cannot complete the generation of data flow. Essbase Error (1007083): failure of generation of Dimension. Error code [1060056]. Check the server log file and the build dimension for possible additional info file.

  \\Error Update of Dimension MA_MONTHS

  \\Error Initializing the rule file information.

  Kindly help.

  Thank you and best regards,

  1060056 error you indicates that the generation or level with the same name already exists. To check if you have the same names of members through / in the dimension.

  Concerning

  Celvin

• Cannot enter data in forms still in white blood cells

  Hi again,
  
  I've logged as an administrator and have the sample planning successfully deployed application to Hyperion Planning 11.1.2.2 and loaded data. I am able to see the forms with data now, but I'm not able to enter data even in white blood cells in the base level member. I have checked the start and close both years and is in the range. I thought I should be able to see the color light yellow to indicate the active cells, where data can be transferred. Am I missing something? Your help is very appreciated.
  
  Steps followed:
  1. create the data source.
  2. create the planning an Application.
  3 initialize the example of planning an application.
  4. register the application with Shared Services Group Application, planning.
  5. create the database.
  6 load data into the cube Essbase of EAS.
  
  Thank you and best regards,
  Karamba.
  
  Published by: Karamba SJ on June 7, 2013 07:13

  If this is the same application, you should not need to change the beginning / the end year/period, if you were not allowed to enter then it seems gray and read-only.

  If it's not patched 11.1.2.2 version, then you need to double click in the cell to enter data, after its entry into the cell needs to change to yellow.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Problem EPMA - request for Essbase BSO - UDA

  Hello
  We have a shared in EPMA hierarchy that we use to maintain the Dimensions in applications.
  Among the sizes that I need in the Essbase BSO application - two of them have specific UDAs assigned to them. (two for each Member in these dimensions - UDAs can be shared between dimensions)
  
  Dimension_A
  -Member_A1 (UDAx, UDAy)
  -Member_A2 (UDAp, UDAq)
  
  Dimension_B
  -Member_B1 (UDAx, UDAy)
  -Member_B2 (UDAp, UDAq)
  
  UDA
  -UDAx
  UDAy-
  -UDAp
  -UDAq
  
  But when I deploy the app, I see only a UDA update in the Essbase outline (checked via EAS)
  Dimension_A
  -Member_A1 (UDAx)
  -Member_A2 (UDAp)
  
  Dimension_B
  -Member_B1 (UDAx)
  -Member_B2 (UDAp)
  
  I don't know why it isn't updated outline properly - can anyone suggest what could be the problem?
  I tried redeploying several times / deleting the dimensions by adding still / even rolled out a new app from scratch - no luck.
  
  
  Concerning
  Ankur

  When you add more than 1 UDA. You need to perform a redeployment after the addition of a new UDA.

  Add a new UDA Member-> remove the OLD.
  Deploy.
  Back to EPMA-> add the OLD to the new UDA
  Deploy again.

  Do this for the first of the dimension hierarchy

  Ex:

  DIM [Dimension]
  --Also [parent]
  -A1 [child /Lvl0]
  -A2 [child /Lvl0]
  ------B
  -------------B1
  -------------B2

  Do the changes described above for A, A1 and A2. Once done, the changes should be reflected at B, B1 and B2 and others, as appropriate

  The changes should now be seen in Essbase.

  Published by: 927809 on October 19, 2012 04:51

  Published by: 927809 on October 19, 2012 04:56

  Published by: 927809 on October 19, 2012 04:59

• Unable to focus TextInput enter data

  Hello

  I am using Macromedia Flex 1.5 & Action Script 2.0 for my Application using Jrun4 as a server.

  Now, my problem is that I am unable to concentrate and impossible to get the cursor in TextInput enter data,

  When I use component load inside another component of loading.

  For example

  < mx:Loader id = "courseSchedule_Loader" contentPath = "loader.mxml.swf" showBusyCursor = "true" / > "

  Inside the loader.mxml, I use a charger that has textinput as a component.

  < mx:Loader id = "TextInput_Loader1" contentPath = "TextInputLoader.mxml.swf" showBusyCursor = "true" / > "

  Concerning

  Rajasekhar

  Try the tabEnabled and tabChildren true on the charger setting.

• transfer data from hyperion essbase

  Hello
  
  In the normal case, we enter data applications hyperion, after that recording, data entered is automatically transferd to Essebase Cube
  
  My question is about the case, it is possible to load the data directly in the Essbase Cube, and after saving the entered data can be transferred to application hyperion automatically?
  
  see you soon,

  If it's on the planning so I don't know if you understand how essbase works with planning, in any case, Yes, you can load the data directly in an essbase database load for example rules, send through a spreadsheet, API etc.
  Once the data is in essbase planning will be able to view the data through a form, just planning is at the top of essbase and recovers and written for her.

  It also should be noted that you asked questions 40 and 32 of them are unsolved, I'm sure that's not the case and it does not take much effort to make useful answers, correct, responded.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Need help with loading BSO cube with several data export files using the Regional service

  Hello
  
  We have BSO cubes that are huge and when I expoted data in files, it generated ABC.txt, ABC_1.txt, ABC_2.txt, like this.
  
  How to load this data in the Cube that sits on the other environments? We use Essbase 9.3.1.
  
  I can load the individual files using EAS data loading? If so, ABC_2.txt then ABC_1.txt and finally an ABC.txt would be the loading sequence back?
  
  Please suggest.

  As Essbase is written this block by block, each block will have its complete info if it is done as a single export or parallel export. You can easily prove this (and I have) If you export a database and load only files 2 or 3, it loads without error. don't forget that you load a file rules, the load fails when the first error. There is no error found, so a value of a complete block of information must be present. Also open export (large files can be opened with wordpad) and you will see a complete info for block exery

• Questions on the aggregation of data for parents

  Hi guys,.
  
  I have two questions.
  
  One, once I have enter data in the leaf level, values aggregate to their parent except period dimension. The aggregation method is elsewhere, conservation never share type and data type is currency. Should provide the member formula to calculate the value for high level members?
  
  Two, some nonleaf members need their own values. For example, a business in the entity dimension unit has some departments. Apart from the consolidation of departments, the BU needs a budget for itself. But members nonleaf cells are read-only. How to deal with my situation?
  
  Thank you

  You can't, not in a release from the bottom up. You can allot of bu1_ to his brothers and sisters. Or you can use the version of up and down, to parents of input values and allocate up to nonleaf members.

  See you soon,.
  Alp