Unable to get any discussion on the Virus & Spyware forum.

Similar Questions

• Update for Sierra and now my Apple music does not appear I have a subscription and I am unable to get my music on the cloud?

  Update for Sierra and now my Apple music does not appear I have a subscription and I am unable to get my music on the cloud?

  Hey there Scotchman2926,

  I understand that you are experiencing some problems with Apple music on Sierra. I have a few suggestions to help you solve this problem. First of all, if you are unable to access the iTunes Store as well as music from Apple, use the information in this article to help resolve this problem:
  

  If you cannot connect to the iTunes Store - Apple Support

  If this does not resolve the problem, you might try signing out of your Apple ID in iTunes and then connect again.

  Thanks to be come to the communities of Apple Support and let us know how it goes.

  See you soon.

• After having my system repaired, I can't have my mobile data card (wireless broadband modem) to operate. I can't get any service from the server.

  TBS wide BAND WIRELESS MODEM data

  I had to have my computer repaired, now I can't get my mobile card data (wireless broadband modem) to operate. I can't get any service from the server. I called them and they said that when the laptop has been repaired. The Ports were not tied and cannot open anything. All other elements of work of these ports (wirelsee mouse/printer and I explained this to the technician, it is only thought was to call in a repair service.) I think their answer is like the auto machnic said to go and change the air in your tires. Can you give me any advice?

  Hello

  I suggest you to stay in touch with your Internet service provider.

• loaded Microsoft combat flight simulator ww11 europe series. Unable to get game start with the joy stick. game with keybord works. gamepad is new logitech 3d pro extrem

  loaded Microsoft combat flight simulator ww11 europe series.  Unable to get game start with the joy stick.  game with keybord works.  gamepad is new logitech 3d pro extrem

  Hi Li-ngme,
   
  (1) have you installed drivers for the joystick correctly?
   
  It seems that the gamepad drivers is not updated for windows 7. Let us know if the gamepad work on other games under Windows 7.

  Try to access the link below and install the drivers for gamepad for windows 7 and even install as an administrator.
  http://www.Logitech.com/index.cfm/441/291&Hub=1&CL=GB, in? WT.z_sp = Image

  If this does not work, try to contact Logitech and check if they have updates on this for windows 7.
   
  ThaThanks and greetings:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• OATS: Error Message 'Unable to get a connection from the browser' on the record

  Hello
  
  I am involved in the control of the operation for application Siebel 8.1, with the OATS 9.3 tool.
  
  Trying to save, an Error Message * "unable to get a connection from the browser. You want to continue to wait for the browser load? "* appears, even if InstallBrowserHelpers has been installed.
  I tried to uninstall the 'BrowserHelpers' and re - install but the question remains.
  
  your response on this will be appreciated.
  
  Thank you!

  Try to uninstall everything that touches on OATS to your PC then re - install. Uninstall steps are in this forum. You can search for it. Work around the error can take a long time.

  Concerning
  CP

• Unable to get organization to accept the video file.

  I tried it works in 7.0 of the Agency, but he would not accept a HD video file. I downloaded a trial of body CS5.5 (I bought as well but will have to wait for the disc to arrive) and now the file is imported, but it appears as an audio with no video. The video plays fine in Windows Media Player. Here's the report from GSpot on the file:

  

  Can someone tell me any reason, I can't import this file?

  Thank you

  ..... Gord

  No matter if you have QT installed for this file; It won't help anyway. Premiere Pro does not support H.264 in an AVI container. We can solve the problem.

  1. Download here the last 32-bit static build of FFmpeg: FFmpeg Zeranoe - built
  2. Open archive. you will probably need 7 - zip from the archive is a .7z file. Check out the ffmpeg.exe file in archive (this is in the 'bin' folder) to the folder containing your opinion.
  3. Create a text document (Notepad is fine) called "avi2mp4.bat" (without the quotes) in the same folder as the notice, making sure to change the default TXT to the bat extension.
  4. Paste the following text in the BAT file:
     

     OFF @ECHO
     "for %% in (*.avi) ffmpeg - I" % a %%~na".mp4" - vcodec copy - acodec copy - f mp4 - y. "

  5. Once you save the BAT file, double-click it; your opinion will be reconditioned to MP4s without any conversion. The MP4s will import correctly in Premiere Pro.

• Cannot install x 86 kb2729450. Cannot find the installation on the microsoft Web site. Unable to get any help from Microsoft, if it is valid. I have window xp OS

  I have Windows xp OS.  Installation is underway for about a week. Don't know if the installation is a valid installation of Microsoft.  Ran a virus/malware scan etc. and negative.

  Hi John,.

  Thanks for posting in the Microsoft Community.

  I understand that you can not install kb2729450.

  Before you start the troubleshooting steps, I need the information required.

  1. you receive an error message?

  2 are you able to install other updates to windows correctly?

  3 did you changes to the computer?

  Method 1:

  I suggest you perform the clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 2:

  I suggest you of for windows update issues, visit the link.

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

  http://support.Microsoft.com/kb/906602

  Cannot install Windows updates

  http://support.Microsoft.com/kb/555461

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Method 3:

  Security Update for Microsoft .NET Framework 2.0 Service Pack 2 on Windows Server 2003 and Windows XP

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=35692

  See also:

  MS12-074: Description of the update of security for .NET Framework 2.0 Service Pack 2 on Windows XP and Windows Server 2003: 13 November 2012

  http://support.Microsoft.com/kb/2729450

• Unable to get PC to recognize the camera from Nikon s3300.

  We just bought a Nikon s3300 camera and can not get our PC to recognize it. Whenever we try to install the software, we get an error message telling us that we are missing a file ptpusb.dll and that we should insert the original XP discs. We have not what the computer was XP is already installed. I tried several programs repair/recover for free available, but none worked. Also, I reloaded the last sp3 for XP hoping this would provide that missing the file, but it doesn't work anymore.  Does anyone have any suggestions to solve this problem? I noticed on the internet, that this is not a rare problem with certain digital cameras and XP, but nowhere can I find someone who seems to know the answer!

  original title: lack of ptpusb.dll

  OK here's what I discovered - I discovered a lot of people who have had this same problem when trying to install a relatively new digital camera on XP. I'm not an expert, but the common theme seems to be that one of the 2 dll files are required by the camera to work via the usb connection, and for some reason that I do not understand that they are not easily identifiable or pre-installed when it connects for the first time. The files are ptbusb.dll and/or his sister c:\windows\system32\ptpusd.dll of the file. According to several sites that I contacted, these default files shoud is in at least one of these places - c:\windows\system32 or \system32\dllcache or c:\windows\drivercache\i386. However, ptbusb.dll was not in one of these locations on the version of XP that I was working, even after reloading of the pack SP3 and after looking all hidden files.

  In the end, I went to www.dll-files.com. This was one of the few sites I found that would let me just to download a zip file with the file that I wanted (with file note on how to install and where), without having to sign up for some sort of remedial program that eventually I would have had to pay for.
  I've copied this file to windows\system32 first and does not need to put it anywhere else, because after this, the camera was immediately recognized and the problem disappeared.

• Suddenly unable to get any sound on AOL.

  All of a sudden I can not any sound on AOL.  How should I do?  I clicked on the icon of audio (lower-right on the desktop) and click on mixer but did not find anything abnormal.  Clicked on aol and sounds found on its default with windows.  When I test it, it sounds, but that's the extent of it.  Power off this Board and back to AOL, I still get no sound.  Help if possible.

  Hello

  Since it is linked to your AOL, it must be part of your settings for the software. Search for solutions, see: http://canada.aol.com/help_files/canada_help9/Communicating_Online/Expressing_Yourself/Changing_AOL_Sounds.htm Best of Luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• ISE - unable to get SNMP information with the community

  This is the output of the switch when clicking on a switch in authentications followed in ise interface

  test2#sh snmp
  Chassis: FOC1330W1K0
  112 SNMP packets input
  0 Bad SNMP version errors
  4 Unknown community name
  0 Illegal operation for community name supplied
  0 Encoding errors
  44 Number of requested variables
  0 Number of altered variables
  44 Get-request PDUs
  0 Get-next PDUs
  0 Set-request PDUs
  0 Input queue packet drops (Maximum queue size 1000)
  143 SNMP packets output
  0 Too big errors (Maximum packet size 1500)
  0 No such name errors
  0 Bad values errors
  0 General errors
  108 Response PDUs
  35 Trap PDUs
  SNMP global trap: enabled
  SNMP logging: enabled
  Logging to xxx.xxx.yyy.5.162, 0/10, 7 sent, 0 dropped.   (admin/monitoring)
  SNMP agent enabled
  

  configuration of snmp:

  snmp-server community snmp-com.public RO 33
  access-list 3 permit xxx.xxx.kk.0 0.0.0.255
  access-list 3 permit xxx.xxx.zz.0 0.0.0.255
  access-list 3 permit xxx.xxx.yyy.0 0.0.0.255 (admin/monitoring)
  

  The unknown community name keeps growing when I click on the name of interface switch in ise... any suggestions?

  SNMP is configured for the switch added to ise with the name of Community law (v2c - snmp - com.public)

  ISE ver 1.1.2.145

  Thank you for your help

  Currently, Yes, this is a limitation

  'public' solves it.  So my advice: 'public' set with an ACL restricting EHT nodes only.

• Unable to get hardware information for the selected with vmware converter 5.5 computer (could not get the ability to \\.\PhysicalDrive0: error opening peripheral drive: 32 an unknown error (0 x 20) (32))

  Hello

  I'm doing a P2V with vmware converter standalone 5.5

  The source is the same machine that hosts the vmware converter 5.5

  The operating system is W2003 which acts as a domain controller

  VMware converter is launched by the administrator account.

  The error that I see on the balls of vmware - converter.worker is:

  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive0."
  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive1."
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{0395a0a1-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{18297536-8c0b-11da-8528-0014852d7e43}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{caf5e9f8-4e6c-11dd-b440-0014852d7e43}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{2958b89a-b562-11dc-a508-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{0395a09f-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{0395a09e-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive0."
  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive0."
  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive1."
  2014 02-13 T 17: 36:41.155 + 01:00 [warning 04344 'Default'] attention: no attached disks have been detected.
  2014 02-13 T 17: 36:41.155 + 01:00 [04344 error 'Default'] [LiveWindowsComputer] could not find disks connected to the computer.
  2014 02-13 T 17: 36:41.170 + 01:00 [info 04344 "Default"] scheduled timer cancelled, succeeds StopKeepAlive
  2014 02-13 T 17: 36:41.170 + 01:00 [04344 error "Default"] unknown exception when calling VMOMI method queryComputerInfo
  2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive0".
  2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive1".
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{0395a0a1-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{18297536-8c0b-11da-8528-0014852d7e43}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{caf5e9f8-4e6c-11dd-b440-0014852d7e43}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{2958b89a-b562-11dc-a508-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{0395a09f-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{0395a09e-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:50.421 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.421 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive0".
  2014 02-13 T 17: 36:50.452 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.452 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive0".
  2014 02-13 T 17: 36:50.499 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.499 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive1".
  2014 02-13 T 17: 36:56.155 + 01:00 [05648 WARNING 'Default'] attention: no attached disks have been detected.
  2014 02-13 T 17: 36:56.155 + 01:00 [05648 error 'Default'] [LiveWindowsComputer] could not find disks connected to the computer.
  2014 02-13 T 17: 36:56.155 + 01:00 [info 05648 "Default"] scheduled timer cancelled, succeeds StopKeepAlive

  This had already happened with another server (also W2003 DC), but the hardware was completely different; Unfortunately, I wasn't able to solve this year here.

  Any help or advice would be appreciated, thanks in advance

  Thank you for all your help

  I finally found the guilty service.

  It was pcmonitor monitor/remote control software. Once I stopped it is service vmware converter could get the capacity of the physical drives.

  It is rather curious because I made several servers P2V conversions using this software (so far the last one two weeks ago - the difference between that server and this one was that the first was not a domain controller).

  Hopefully this thread will help others in the future.

• Unable to get any audio from webcams built in mic

  I still can't get audio of my webcams built in mic, I have Windows Vista Home Basic desktop Dell 32 bit, I went into Control Panel and click on hardware and audio and I noticed that one of my card drivers sound is missing it was a microphone icon and he disappeared. I have an old microphone that I connected to microphone before and I did a sound check and it works very well and when I try to use my new webcams built in mic a pop up and it is said (cannot create audio filter). I made no changes to the computer, all my drivers have been updated. The name of my webcam is Gear head 5.0MP HD I tried everything to get the audio from webcams to work, I also made sure the mute was off and she was not dumb.

  Now I know not which driver was missing as far as I know, it's a microphone that was present in the recording tab and he had a microphone and then icon the next day, that the driver had disappeared, I thought to go to the Device Manager, but I don't know which driver it is on and how to reinstall the driver.

  I don't really know what to do and how to solve this problem, can you please help me.

  So thank you for your time

  On the sound, the record tab, tried to right click on the device, and then click 'Show damage disabled' or ' Show disconnected devices? If your microphone has shown, you can set as default.

  To access the recording tab, right click on the speaker icon on the tray (Notification area), in the context menu that appears, click on "sound".

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-in/Windows-Vista/tips-for-fixing-common-sound-problems

• Unable to get vista to open the games on facebook. Still trying to redirect me.

  I am able to open my facebook page.  Whenever I try to open one of my games, Zoo world, _ wars, etc... It opens way trys to loop and redirect far and habit. Any idea on what I can do?

  Since you've been installing Facebook apps, there is a high probability that your computer is infected. Please start with the basics and post back with results for additional help:

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  MS - MVP - Elephant Boy computers - don't panic!

• Unable to get any code to display HTML content to work in my application

  Help, please! I am new to Java and BlackBerry development and that you must create an application for my work. I'm stuck on I invoke a browser. I tried the code from the development guide, as well as the BlackBerry and BlackBerry Advanced beginning books. Everything else seems to work fine except for something to do with a browser.

  Copy the following code:

  package BrowserFieldDemo;

  Import net.rim.device.api.browser.field2.BrowserField;
  Import net.rim.device.api.ui.UiApplication;
  Import net.rim.device.api.ui.container.MainScreen;

  SerializableAttribute public class BrowserFieldDemo extends UiApplication
      
  {
  Public Shared Sub main (String [] args)
  {
  BrowserFieldDemo app = new BrowserFieldDemo();
  app.enterEventDispatcher ();
  }
      
  public BrowserFieldDemo()
          
  {
  pushScreen (new BrowserFieldDemoScreen());
  }
  class BrowserFieldDemoScreen extends screen
  {
  public BrowserFieldDemoScreen()
  {
  BrowserField myBrowserField = new BrowserField();
  Add (myBrowserField);
  myBrowserField.requestContent ("http://m.youranswerplace.org");
  }
  }
  }

  gives the error "error starting BrwoserFieldDemo: Module 'net_rim_bb_browser_field2_api' not found.

  This is a simulator of 8230.

  I have other examples. The actual application that I do is supposed to bring to the browser inside, but nothing happens. No errors and no site. I tried on a direct phone (curve).

  Any help at all would be so appreciated!

  Thank you!!!

  Thanks, but I have now. It's ugly, but at least I now have a starting point. Thanks a lot for your help!

• Impossible to get any movement in the monitor window during playback of a clip (PE10); preview image of the clip just shows a white screen. Passed through the analysis of the standard parameters, etc.

  Statistics of the computer:

  OS = Windows 8.1, 64-bit

  RAM = 32 G

  NVIDIA GeForce GTX 760 video card

  Project settings:

  

  Properties file:

  

  The files were hi-def videos from YouTube. The statistics for these types of files, directly listed on YouTube are:

  

  So where I'm going wrong? I Muvipix.com Steve Grisetti Adobe PE 10 Guide, but there is no discussion of this problem.

  BK

  prman13

  Although the version of the driver NVIDIA GeForce back to may 2013 is necessary and possible for many, users with Windows 8 or 8.1 64-bit machines are out of luck since NVIDIA does not seem to have drivers version old enough for them. The problem has never been defined by Adobe or NVIDIA. And the manifestations of the problem vary in the general theme of "show irregularities."

  Species first Elements 10/NVIDIA GeForce was always specific for first Elements 10. I have not seen all the reports of its appearance in versions 11, 12 or 13. Whether this situation specific or otherwise, better to go on the road to the free trial to determine the compatibility between the program and your computing environment as well as between the program and your goals of editing the video.

  There were several major withdrawals of first 13 items

  1. no more exports flv/f4v

  2 DV and HDV Capture went

  3. no support for Windows XP, Windows Vista and Mac OS x 10.7

  4. withdrawal of VBR, 2 Pass for Bitrate encoding in several choices of export

  to name a few... for more details...

  First Elements ATR troubleshooting: first Elements 13 first look details

  Thanks for your follow-up. Appreciated.

  RTA