Unable to load dynamic library
Does this mean I'm screwed?
RTSLVU wrote:
Does this mean I'm screwed?
The answer depends on whether it has been saved.
If you rename the file you posted as '.xls', it is opened in Excel and shows me three tabs...
Ben
Tags: NI Software
Similar Questions
-
Hi all!
Yesterday, I worked all day in a VI and today, unfortunately, I'm frustrated when I tried to open it. Received the following error message:
LABVIEW: Unable to load dynamic library due to lack of external symbols or dependencies, or a format file not valid. The "ENG633 v1.vi" file could not be loaded.
This message repeats when I try else open a Subvi.
Step by step:
1. I created a copy of the LabVIEW VI example: "FuzzyEx Tanks with control of PI." I kept the copy in the same original directory.
2 - I have edited the copy, created Subvi etc.
3 - once I finished my course of programming I closed all the cut (ctrl-x) files and copied (ctrl v) into the other folder.
4. then I tried to open the next day and... bug! I just couldn't do
What can I do to open/recover the VI?
I am using 32-bit LabVIEW 2016 in a Windows 10
I tried opening them and got the same error you did, so I them opened with a hex editor to see if there was something in the file, and there is literally nothing other than the value of 0x00 for the entire file.
-
Unable to load authentication library, Exiting
Impossible to play counter strike. Whenever it goes to the loading page, it will display a fatal error that is "failed to load authentication library, output. Have just format from Windows xp to Windows 7. And try several method hoping someone could help me thanks!
Hello
It happens only with counter strike or other games?
Method 1: Start the game with administrator privileges and check if you can play the game.
Method 2: I suggest that you put the computer to boot and then play the game and check if the problem persists:
http://support.Microsoft.com/kb/929135
Note: Reset the computer to normal startup by following step 7 from the link.
You can post your request in the forum counter strike for further assistance:
http://forums.steampowered.com/forums/showthread.php?t=1705745
Check the Event Viewer for error logs.
-
AS 3.0: Loading dynamically Library symbols...
Hello, everyone
So I spent the whole day looking for a solution, but unfortunately, might find something relevant. Here's the brief description:
There are several sequences filmed, which are exported to "export for Actionscript". Each clip has a unique name, but a naming model is followed, i.e.:
clip0: inst_0
clip1: inst_1
...
Now, the idea initially was to imitate the AS2 'identifier capacity' in AS3, as he is mentioned in a number of sources that I could find on this issue.
Basically, I wanted the script to shoot random video clips by using their unique class as the reference name. Here's the script:
var rand: Number = Math.floor (Math.random () * 10) % n_instances; random number
Inst var = "inst_" + rand;
var instance = new inst();
No matter how hard I tried, I was not able to make Flash perform "inst" as the name of a class, not a string. A constraint implicit/explicit (or whatever it's called), variable declaration - nothing works. My only hope was the "eval" function, but that one got obsolete and has no equivalent. So, the question is that "the names of the classes initialized are known", but no matter which - they can't be called using a kind of function, that uses a certain diet to reference the names.
So is - that someone has stumbled upon such a problem? (I'm not the only dumb@ss with AS3 difficulties?)Thank you, Craig
-
Could not load the Library dynamic oci8.so
Hi all
When I try to start XAMPP, I get the error below.
PHP Warning: PHP Startup: unable to load dynamic library ' / usr/lib/php/extensions/no-debug-non-zts-20090626/oci8.so'-libclntsh.so.10.1: cannot open shared object file: no such file or directory in unknown on line 0
But I have libclntsh.so.11.1 in my system. Why is it looking for libclntsh.so.10.1?
Madhu.149 wrote:
Hi all
When I try to start XAMPP, I get the error below.
PHP Warning: PHP Startup: unable to load dynamic library ' / usr/lib/php/extensions/no-debug-non-zts-20090626/oci8.so'-libclntsh.so.10.1: cannot open shared object file: no such file or directory in unknown on line 0
But I have libclntsh.so.11.1 in my system. Why is it looking for libclntsh.so.10.1?
Madhu.149 wrote:
Hi all
When I try to start XAMPP, I get the error below.
PHP Warning: PHP Startup: unable to load dynamic library ' / usr/lib/php/extensions/no-debug-non-zts-20090626/oci8.so'-libclntsh.so.10.1: cannot open shared object file: no such file or directory in unknown on line 0
But I have libclntsh.so.11.1 in my system. Why is it looking for libclntsh.so.10.1?
> Why it's looking for libclntsh.so.10.1?
old PHP software that does not know the V11
So just create a softlink as below
ln-s libclntsh.so.11.1 libclntsh.so.10.1
-
Hi all
I have a problem with installing OCI8 and I would be grateful if you could kindly guide me how to solve this problem.
I started to read the following articles to find out how to install the package OCI8 to install between PHP and oracle
http://www.php.net/manual/en/oci8.installation.php
http://www.Oracle.com/technetwork/articles/TechNote-PHP-instant-084410.html
Here is my description of the environment
Just a detail: almost every documentation begins by explaining the instant client installation. However, on the same physical machine, before you even install Apache and PHP. Oracle server was completely installed, i.e. both server and client (SQL * Plus, SQL * Loader,...). Accordingly, I have omitted this step in the documentation and I continued by measured install OCI8 and apparently everything has been compiled successfully (no error message).OS: Fedora Core 17 (X86_64) Oracle version: Oracle Enterprise Edition 11gR2 (11.2.0.1.0) X86_64 PHP Version: 5.4.13 Apache version: 2.2.23
Problem: OCI8 does not appear in the phpinfo() function
This suggests that there is a problem. I'll write exactly how I did and I would be grateful if you could well want to take a look at these steps and say if I made errors
I started by running as ROOT. As I said the oracle server has already been installed on the machine and therefore all environment variables required as LD_LIBRARY_PATH ORACLE_SID,... have already been defined in ~/.bash_profile
And if you look at the output below, you can see that for example ORACLE_HOME is detected automatically during the installation (* check Oracle ORACLE_HOME install directory... u01/app/oracle/product/11.2.0/db_1*)
It gave me the following result# pecl install oci8
Once installed OCI8 I've updated the */etc/php.ini* accordingly, by adding the following entries# pecl install oci8 downloading oci8-1.4.9.tgz ... Starting to download oci8-1.4.9.tgz (169,255 bytes) .....................................done: 169,255 bytes 10 source files, building running: phpize Configuring for: PHP Api Version: 20100412 Zend Module Api No: 20100525 Zend Extension Api No: 220100525 Please provide the path to the ORACLE_HOME directory. Use 'instantclient,/path/to/instant/client/lib' if you're compiling with Oracle Instant Client [autodetect] : building in /var/tmp/pear-build-rootGiD7YE/oci8-1.4.9 running: /var/tmp/oci8/configure --with-oci8 checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for a sed that does not truncate output... /usr/bin/sed checking for cc... cc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking how to run the C preprocessor... cc -E checking for icc... no checking for suncc... no checking whether cc understands -c and -o together... yes checking for system library directory... lib checking if compiler supports -R... no checking if compiler supports -Wl,-rpath,... yes checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu checking target system type... x86_64-unknown-linux-gnu checking for PHP prefix... /usr checking for PHP includes... -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib checking for PHP extension directory... /usr/lib64/php/modules checking for PHP installed headers prefix... /usr/include/php checking if debug is enabled... no checking if zts is enabled... no checking for re2c... no configure: WARNING: You will need re2c 0.13.4 or later if you want to regenerate PHP parsers. checking for gawk... gawk checking for Oracle Database OCI8 support... yes, shared checking PHP version... 5.4.13, ok checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking size of long int... 8 checking checking if we're on a 64-bit platform... yes checking Oracle ORACLE_HOME install directory... /u01/app/oracle/product/11.2.0/db_1 checking ORACLE_HOME library validity... lib checking Oracle library version compatibility... 11.1 checking how to print strings... printf checking for a sed that does not truncate output... (cached) /usr/bin/sed checking for fgrep... /usr/bin/grep -F checking for ld used by cc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format... func_convert_file_noop checking how to convert x86_64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking for gawk... (cached) gawk checking command to parse /usr/bin/nm -B output from cc object... ok checking for sysroot... no checking for mt... no checking if : is a manifest tool... no checking for dlfcn.h... yes checking for objdir... .libs checking if cc supports -fno-rtti -fno-exceptions... no checking for cc option to produce PIC... -fPIC -DPIC checking if cc PIC flag -fPIC -DPIC works... yes checking if cc static flag -static works... no checking if cc supports -c -o file.o... yes checking if cc supports -c -o file.o... (cached) yes checking whether the cc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no configure: creating ./config.status config.status: creating config.h config.status: executing libtool commands running: make /bin/sh /var/tmp/pear-build-rootGiD7YE/oci8-1.4.9/libtool --mode=compile cc -I. -I/var/tmp/oci8 -DPHP_ATOM_INC -I/var/tmp/pear-build-rootGiD7YE/oci8-1.4.9/include -I/var/tmp/pear-build-rootGiD7YE/oci8-1.4.9/main -I/var/tmp/oci8 -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -I/u01/app/oracle/product/11.2.0/db_1/rdbms/public -I/u01/app/oracle/product/11.2.0/db_1/rdbms/demo -DHAVE_CONFIG_H -g -O2 -c /var/tmp/oci8/oci8.c -o oci8.lo libtool: compile: cc -I. -I/var/tmp/oci8 -DPHP_ATOM_INC -I/var/tmp/pear-build-rootGiD7YE/oci8-1.4.9/include -I/var/tmp/pear-build-rootGiD7YE/oci8-1.4.9/main -I/var/tmp/oci8 -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -I/u01/app/oracle/product/11.2.0/db_1/rdbms/public -I/u01/app/oracle/product/11.2.0/db_1/rdbms/demo -DHAVE_CONFIG_H -g -O2 -c /var/tmp/oci8/oci8.c -fPIC -DPIC -o .libs/oci8.o /bin/sh /var/tmp/pear-build-rootGiD7YE/oci8-1.4.9/libtool --mode=compile cc -I. -I/var/tmp/oci8 -DPHP_ATOM_INC -I/var/tmp/pear-build-rootGiD7YE/oci8-1.4.9/include -I/var/tmp/pear-build-rootGiD7YE/oci8-1.4.9/main -I/var/tmp/oci8 -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -I/u01/app/oracle/product/11.2.0/db_1/rdbms/public -I/u01/app/oracle/product/11.2.0/db_1/rdbms/demo -DHAVE_CONFIG_H -g -O2 -c /var/tmp/oci8/oci8_lob.c -o oci8_lob.lo libtool: compile: cc -I. -I/var/tmp/oci8 -DPHP_ATOM_INC -I/var/tmp/pear-build-rootGiD7YE/oci8-1.4.9/include -I/var/tmp/pear-build-rootGiD7YE/oci8-1.4.9/main -I/var/tmp/oci8 -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -I/u01/app/oracle/product/11.2.0/db_1/rdbms/public -I/u01/app/oracle/product/11.2.0/db_1/rdbms/demo -DHAVE_CONFIG_H -g -O2 -c /var/tmp/oci8/oci8_lob.c -fPIC -DPIC -o .libs/oci8_lob.o /bin/sh /var/tmp/pear-build-rootGiD7YE/oci8-1.4.9/libtool --mode=compile cc -I. -I/var/tmp/oci8 -DPHP_ATOM_INC -I/var/tmp/pear-build-rootGiD7YE/oci8-1.4.9/include -I/var/tmp/pear-build-rootGiD7YE/oci8-1.4.9/main -I/var/tmp/oci8 -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -I/u01/app/oracle/product/11.2.0/db_1/rdbms/public -I/u01/app/oracle/product/11.2.0/db_1/rdbms/demo -DHAVE_CONFIG_H -g -O2 -c /var/tmp/oci8/oci8_statement.c -o oci8_statement.lo libtool: compile: cc -I. -I/var/tmp/oci8 -DPHP_ATOM_INC -I/var/tmp/pear-build-rootGiD7YE/oci8-1.4.9/include -I/var/tmp/pear-build-rootGiD7YE/oci8-1.4.9/main -I/var/tmp/oci8 -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -I/u01/app/oracle/product/11.2.0/db_1/rdbms/public -I/u01/app/oracle/product/11.2.0/db_1/rdbms/demo -DHAVE_CONFIG_H -g -O2 -c /var/tmp/oci8/oci8_statement.c -fPIC -DPIC -o .libs/oci8_statement.o /bin/sh /var/tmp/pear-build-rootGiD7YE/oci8-1.4.9/libtool --mode=compile cc -I. -I/var/tmp/oci8 -DPHP_ATOM_INC -I/var/tmp/pear-build-rootGiD7YE/oci8-1.4.9/include -I/var/tmp/pear-build-rootGiD7YE/oci8-1.4.9/main -I/var/tmp/oci8 -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -I/u01/app/oracle/product/11.2.0/db_1/rdbms/public -I/u01/app/oracle/product/11.2.0/db_1/rdbms/demo -DHAVE_CONFIG_H -g -O2 -c /var/tmp/oci8/oci8_collection.c -o oci8_collection.lo libtool: compile: cc -I. -I/var/tmp/oci8 -DPHP_ATOM_INC -I/var/tmp/pear-build-rootGiD7YE/oci8-1.4.9/include -I/var/tmp/pear-build-rootGiD7YE/oci8-1.4.9/main -I/var/tmp/oci8 -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -I/u01/app/oracle/product/11.2.0/db_1/rdbms/public -I/u01/app/oracle/product/11.2.0/db_1/rdbms/demo -DHAVE_CONFIG_H -g -O2 -c /var/tmp/oci8/oci8_collection.c -fPIC -DPIC -o .libs/oci8_collection.o /bin/sh /var/tmp/pear-build-rootGiD7YE/oci8-1.4.9/libtool --mode=compile cc -I. -I/var/tmp/oci8 -DPHP_ATOM_INC -I/var/tmp/pear-build-rootGiD7YE/oci8-1.4.9/include -I/var/tmp/pear-build-rootGiD7YE/oci8-1.4.9/main -I/var/tmp/oci8 -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -I/u01/app/oracle/product/11.2.0/db_1/rdbms/public -I/u01/app/oracle/product/11.2.0/db_1/rdbms/demo -DHAVE_CONFIG_H -g -O2 -c /var/tmp/oci8/oci8_interface.c -o oci8_interface.lo libtool: compile: cc -I. -I/var/tmp/oci8 -DPHP_ATOM_INC -I/var/tmp/pear-build-rootGiD7YE/oci8-1.4.9/include -I/var/tmp/pear-build-rootGiD7YE/oci8-1.4.9/main -I/var/tmp/oci8 -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -I/u01/app/oracle/product/11.2.0/db_1/rdbms/public -I/u01/app/oracle/product/11.2.0/db_1/rdbms/demo -DHAVE_CONFIG_H -g -O2 -c /var/tmp/oci8/oci8_interface.c -fPIC -DPIC -o .libs/oci8_interface.o /bin/sh /var/tmp/pear-build-rootGiD7YE/oci8-1.4.9/libtool --mode=link cc -DPHP_ATOM_INC -I/var/tmp/pear-build-rootGiD7YE/oci8-1.4.9/include -I/var/tmp/pear-build-rootGiD7YE/oci8-1.4.9/main -I/var/tmp/oci8 -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -I/u01/app/oracle/product/11.2.0/db_1/rdbms/public -I/u01/app/oracle/product/11.2.0/db_1/rdbms/demo -DHAVE_CONFIG_H -g -O2 -o oci8.la -export-dynamic -avoid-version -prefer-pic -module -rpath /var/tmp/pear-build-rootGiD7YE/oci8-1.4.9/modules oci8.lo oci8_lob.lo oci8_statement.lo oci8_collection.lo oci8_interface.lo -Wl,-rpath,/u01/app/oracle/product/11.2.0/db_1/lib -L/u01/app/oracle/product/11.2.0/db_1/lib -lclntsh libtool: link: cc -shared -fPIC -DPIC .libs/oci8.o .libs/oci8_lob.o .libs/oci8_statement.o .libs/oci8_collection.o .libs/oci8_interface.o -L/u01/app/oracle/product/11.2.0/db_1/lib -lclntsh -O2 -Wl,-rpath -Wl,/u01/app/oracle/product/11.2.0/db_1/lib -Wl,-soname -Wl,oci8.so -o .libs/oci8.so libtool: link: ( cd ".libs" && rm -f "oci8.la" && ln -s "../oci8.la" "oci8.la" ) /bin/sh /var/tmp/pear-build-rootGiD7YE/oci8-1.4.9/libtool --mode=install cp ./oci8.la /var/tmp/pear-build-rootGiD7YE/oci8-1.4.9/modules libtool: install: cp ./.libs/oci8.so /var/tmp/pear-build-rootGiD7YE/oci8-1.4.9/modules/oci8.so libtool: install: cp ./.libs/oci8.lai /var/tmp/pear-build-rootGiD7YE/oci8-1.4.9/modules/oci8.la libtool: finish: PATH="/usr/bin:/usr/lib64/qt-3.3/bin:/usr/lib64/ccache:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/.local/bin:/root/bin:/usr/local/jdk1.7.0_05/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin:/u01/app/oracle/product/11.2.0/db_1/bin:/opt/libreoffice4.0/program:/root/.local/bin:/root/bin:/usr/local/jdk1.7.0_05/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin:/u01/app/oracle/product/11.2.0/db_1/bin:/opt/libreoffice4.0/program:/root/.local/bin:/root/bin:/usr/local/jdk1.7.0_05/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin:/u01/app/oracle/product/11.2.0/db_1/bin:/opt/libreoffice4.0/program:/root/.local/bin:/root/bin:/usr/local/jdk1.7.0_05/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin:/u01/app/oracle/product/11.2.0/db_1/bin:/opt/libreoffice4.0/program:/root/.local/bin:/root/bin:/usr/local/jdk1.7.0_05/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin:/u01/app/oracle/product/11.2.0/db_1/bin:/op t/libreoffice4.0/program:/root/.local/bin:/root/bin:/usr/local/jdk1.7.0_05/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin:/u01/app/oracle/product/11.2.0/db_1/bin:/opt/libreoffice4.0/program:/sbin" ldconfig -n /var/tmp/pear-build-rootGiD7YE/oci8-1.4.9/modules ---------------------------------------------------------------------- Libraries have been installed in: /var/tmp/pear-build-rootGiD7YE/oci8-1.4.9/modules If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- Build complete. Don't forget to run 'make test'. running: make INSTALL_ROOT="/var/tmp/pear-build-rootGiD7YE/install-oci8-1.4.9" install Installing shared extensions: /var/tmp/pear-build-rootGiD7YE/install-oci8-1.4.9/usr/lib64/php/modules/ running: find "/var/tmp/pear-build-rootGiD7YE/install-oci8-1.4.9" | xargs ls -dils 3679979 4 drwxr-xr-x. 3 root root 4096 Apr 4 15:48 /var/tmp/pear-build-rootGiD7YE/install-oci8-1.4.9 3680009 4 drwxr-xr-x. 3 root root 4096 Apr 4 15:48 /var/tmp/pear-build-rootGiD7YE/install-oci8-1.4.9/usr 3680010 4 drwxr-xr-x. 3 root root 4096 Apr 4 15:48 /var/tmp/pear-build-rootGiD7YE/install-oci8-1.4.9/usr/lib64 3680011 4 drwxr-xr-x. 3 root root 4096 Apr 4 15:48 /var/tmp/pear-build-rootGiD7YE/install-oci8-1.4.9/usr/lib64/php 3680012 4 drwxr-xr-x. 2 root root 4096 Apr 4 15:48 /var/tmp/pear-build-rootGiD7YE/install-oci8-1.4.9/usr/lib64/php/modules 3680008 596 -rwxr-xr-x. 1 root root 606865 Apr 4 15:48 /var/tmp/pear-build-rootGiD7YE/install-oci8-1.4.9/usr/lib64/php/modules/oci8.so Build process completed successfully Installing '/usr/lib64/php/modules/oci8.so' install ok: channel://pecl.php.net/oci8-1.4.9 configuration option "php_ini" is not set to php.ini location You should add "extension=oci8.so" to php.ini #
Also I updated the * / etc/sysconfig/httpd * in order to export the specified operating system environment variables set. So I added the following lines at the end of the file;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; Dynamic Extensions ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; If you wish to have an extension loaded automatically, use the following ; syntax: ; ; extension=modulename.extension . . . extension=oci8.so . . . ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; Paths and Directories ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; UNIX: "/path1:/path2" ; ; . . . extension_dir="/usr/lib64/php/modules"
To verify that these values are actually taken into account by Apache, I runORACLE_HOME=/u01/app/oracle/product/11.2.0/db_1 LD_LIBRARY_PATH=/u01/app/oracle/product/11.2.0/db_1/lib:/u01/app/oracle/product/11.2.0/db_1/network/lib LD_LIBRARY_PATH64=/u01/app/oracle/product/11.2.0/db_1/lib:/u01/app/oracle/product/11.2.0/db_1/network/lib TNS_ADMIN=/u01/app/oracle/product/11.2.0/db_1/network/admin NLS_LANG=AMERICAN_AMERICA.WE8MSWIN1252 ORACLE_SID=db01
Can I run a PHP script with the phpinfo() function and present especially in the environment section were the values above the LD_LIBRARY_PATH variable.# service httpd restart
As I said, however, there is no OCI8 input output of the phpinfo() function. I checked the apache log file and saw that there is a problem
What I understand log above, is that the libclntsh.so.11.1 shared library is not found. Yet I checked and saw that it is present in LD_LIBRARY_PATH# cat /var/log/httpd/error_log [Thu Apr 04 16:02:13 2013] [notice] SELinux policy enabled; httpd running as context system_u:system_r:httpd_t:s0 [Thu Apr 04 16:02:13 2013] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec) [Thu Apr 04 16:02:13 2013] [notice] Digest: generating secret for digest authentication ... [Thu Apr 04 16:02:13 2013] [notice] Digest: done PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules/oci8.so' - libclntsh.so.11.1: cannot open shared object file: No such file or directory in Unknown on line 0 [Thu Apr 04 16:02:13 2013] [warn] mod_wsgi: Compiled for Python/2.7.2. [Thu Apr 04 16:02:13 2013] [warn] mod_wsgi: Runtime using Python/2.7.3. [Thu Apr 04 16:02:13 2013] [notice] Apache/2.2.23 (Unix) DAV/2 PHP/5.4.13 mod_wsgi/3.3 Python/2.7.3 configured -- resuming normal operations #
If the last line, shows that the specified library exists in * / u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1*.# locate libclntsh.so /u01/app/oracle/product/11.2.0/db_1/inventory/Scripts/ext/lib/libclntsh.so.11.1 /u01/app/oracle/product/11.2.0/db_1/inventory/backup/2012-06-25_12-08-41PM/Scripts/ext/lib/libclntsh.so.11.1 /u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so /u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.10.1 /u01/app/oracle/product/11.2.0/db_1/lib/libclntsh.so.11.1 #
So I seem really what is the problem and the strangest thing is that, in the command line PHP seems to detect my oracle server settings.
I thought that maybe there are several different php.ini and one used in GUI is not the same used in CLI but research has shown that there is only a single php.ini file$ php --ri oci8 oci8 OCI8 Support => enabled Version => 1.4.9 Revision => $Id: e2241cffb72c940cb2ca267b7a6a0ce436de7e5e $ Active Persistent Connections => 0 Active Connections => 0 Oracle Run-time Client Library Version => 11.2.0.1.0 Oracle Version => 11.2 Compile-time ORACLE_HOME => /u01/app/oracle/product/11.2.0/db_1 Libraries Used => -Wl,-rpath,/u01/app/oracle/product/11.2.0/db_1/lib -L/u01/app/oracle/product/11.2.0/db_1/lib -lclntsh Temporary Lob support => enabled Collections support => enabled Directive => Local Value => Master Value oci8.max_persistent => -1 => -1 oci8.persistent_timeout => -1 => -1 oci8.ping_interval => 60 => 60 oci8.privileged_connect => Off => Off oci8.statement_cache_size => 20 => 20 oci8.default_prefetch => 100 => 100 oci8.old_oci_close_semantics => Off => Off oci8.connection_class => no value => no value oci8.events => Off => Off $
It's almost 3 days I'm Googling to find a solution to this problem without success.# locate php.ini /etc/php.ini # # # php -i | grep Configuration Configuration File (php.ini) Path => /etc Loaded Configuration File => /etc/php.ini Configuration #
So, could someone help me, what is the problem? Why the OCI8 module cannot be loaded by PHP and become visible in the output of the phpinfo() function?
Thanks in advance,
Kind regards
DariyooshSince you say that the PHP command line is OK, I'm sure the problem comes from the Apache environment variables set.
The last time I saw a similar problem, it was because I forgot to use "export". It was on Oracle Linux, equivalent to RHEL.I can't explain a couple of your most recent results, for example what you're seeing when using 'export' in/etc/sysconfig/httpd.
Try to disable SELinux. On Oracle Linux would change/etc/selinux/config, SELINUX set to DISABLED and reboot. See also the setenforce command.
About starting Apache, you must use apachectl start or /etc/init.d/httpd only if you set environment variables in your shell terminal and you want those to go down to Apache. If you look at the script of shell/sbin/service (Linux, Oracle), you can see that it works 'env-i' to start with a vacuum environment. If the environment values that you set in the terminal shell would be ignored. That's why they should be added to/etc/sysconfig/httpd when using 'service '.
Oh, and don't forget to give the permissions for the owner of the process Apache to read the Oracle libraries and other data files in u01/app/oracle/product/11.2.0/db_1. After a new installation of DB I always change the permissions on the ~ 700 to 755 oracle directory. See 'frequently observed connection and environment errors.
page 107 of the book. -
Unable to load the shared library LVASPT_WA.*
Hello
I have a hope that easy to fix the error: I want to use the function "WA Detrend' to the signal processing tool advanced in a real-time application running on a cRio 9030. When I try to run the VI I get the following error:
...
Deployment NI_AdvSigProcWA.lvlib:WA decimation Filter.vi
NI_AdvSigProcWA.lvlib:WA decimation Filter.vi loaded with errors on the target and was closed.
LabVIEW: Unable to load the shared library LVASPT_WA.*ptDecimationFilterH:C. make sure that the library is present on the target of RT. Either MAX allows you to install software from OR or FTP to transfer custom RT target libraries....
I reinstalled signals Advanced processing toolkit and linked things 'add new software' MAX, but the error persists.
A picture of what the system looks like to the MAX is attached.
Also, I Fund this post:
could someone tell me what he means by "Please check the installation of the custom software all mode '?
Can you telll me what I am doing wrong?
Thank you very much in advance!
I ran your situation in R & D, and the problem seems to be as a result of Advanced Signal Processing Toolkit is not not compatible on the x 64 under Linux RT OS in the 9030. The product page could be clearer on this gap. I am currently a web application to get this fixed!
Best,
David
-
Unable to load the shared library nilvce.*
When you try to deploy a Labview 2009 real-time application, I get the message:
Deployment XDNodeRunTimeDep.lvlib:loadnilvce.viXDNodeRunTimeDep.lvlib:loadnilvce.vi loaded with errors on the target and was closed.
LabVIEW: Unable to load the shared library nilvce. *: niLVCtrlEngineReserveProc:C on the target RT device.
Completed with errors of deploymentI reformatted the CRIO-9073 and reinstalled the software, but this did not help.
Any ideas on how to solve this problem?
I was able to solve this problem by changing the settings in a timed loop Structure.
The Source Type has been set to "synchronize in the scan engine. This change to the problem solved 1 kHz clock source.
This vi was initially written for the interface of the scan engine and reused on another project that uses the FPGA interface.
-
Error message "unable to load the shared library.
I try to get my programs for school to work, and I get these error message whenever I try to run anything. The last line of the State of deployment is as follows:
Deployment time get NLVSim and isAcceptedStep.vi IsAcceptedStep.vi and NILVSim get busy with errors on the target and has been closed.
LabVIEW: Unable to load the shared library NILVSim.*: SIM_GetTimeAndIsAccepted:C. make sure the library is present on the target of RT. Either MAX allows you to install software from OR or FTP to transfer custom RT target libraries.
I tried everything I can think of to fix this. I checked NEITHER Max and I'm all for date on the software. I reinstalled LabVIEW twice, and I reset my myRIO. My classmates do not experience problems with getting theres to work. I start to lose hope and hope someone might know what the question. Thank you for your help.
WubaDee,
NILVSim is part of the LV Control Design and Simulation Module. This one is correctly installed on your Windows development system and you installed it on your myRIO?
Norbert
-
Original title: while loading turbo tax software & this message. The procedure entry point EncodePointer be found in the dynamic library KERNELL32.dll. can someone tell me how to solve this problem?
I have windows xp 2002 Service Pack 2
Hi henryjeshom,
· Did you do changes on the computer before the show?
Follow these methods.
Method 1: Uninstall and reinstall the application of Turbo tax.
How to change or remove a program in Windows XP
http://support.Microsoft.com/kb/307895
Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.
After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.
(a) click Start, run.
(b) type msconfigand click OK.
(c) the System Configuration Utility dialog box appears.
(d) click the general tab, click Normal startup - load all services and device drivers and then click OK.
(e) when you are prompted, click on restart to restart the computer.
If the problem persists, contact support for Turbo tax for more help and information.
-
Hi all
I have a HP TouchSmart tx2-1025dx Notebook PC Vista... I met 2 large pop-up windows that will not close & appear as soon as I turn on my computer gives me a time DIFFICULT to access anything whatsoever...
They read as follows:
NtrigApplet - unable to connect to the driver: failure to open the device
TVAgent.exe - Entry Point not found the procedure point PowerReadACValue entry is not found in the dynamic library POWRPROF.dll
CAN SOMEONE PLEASE HELP?
THANK U :)Hi the apprentice 85,
Remember to make changes to the computer before that happened?
Looks like the problem is hardware or software related, I suggest you follow the below mentioned steps below to refine the question
Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.
If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue. Then get any drivers\software update for the device.
Step 2: Put the computer to boot to determine which program is causing the problem
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
Continue with the remaining steps to pin-point on the third party service.
After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.
Important: n ' forget not the computer to start normal follow step 7 in the link.
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
The Mozilla FF page loads, but no site that is open in FF. I checked the Proxy box, I disabled my Windows Firewall. There is a firewall for my Norton, but which has been there since day 1. One day, I do all my things FF without problem; the next morning I turn the computer on & nothing in FF will work. That is to say works well. AOL works fine if my internet connection is not the problem. This is the message that I get any site I try to open (I also copied the text of troubleshooting below this): thanks for any help - it's really driving me crazy!
Unable to connect
Firefox can't establish a connection to the server www.aol.com.The site could be temporarily unavailable or too busy. Try again in a few moments. If you are unable to load any pages, check your computer's network connection. If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
Troubleshooting 'copy text to the Clipboard.
The application databasesName: Firefox
Version: 33.0.2
User Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; RV:33.0) Gecko/20100101 Firefox/33.0
Windows multiprocessing: 0/1Reports of incidents for the last 3 days
All Crash reports
Extensions
Name: AVG toolbar backup
Version: 17.1.3.3
Enabled: false
ID: avg@toolbarName: InfoAtoms
Version: 1.5.0.0
Enabled: false
ID: [email protected]Name: Norton Toolbar
Version: 2014.7.8.23
Enabled: false
ID: {2D3F3651-74B9-4795-BDEC-6DA2F431CB62}Name: PasswordBox
Version: 1.20.0.2308
Enabled: false
ID: [email protected]Name: RealDownloader
Version: 1.3.3
Enabled: false
ID: {DF153AFF-6948-45d7-AC98-4FC4AF8A08E2}Name: Skype Click-to-Call
Version: 6.13.0.13771
Enabled: false
ID: {82AF8DCA-6DE9-405D-BD5E-43525BDAD38A}Graphics
Description of the adapter: Intel G41 Express Chipset
Drivers: igdumd64 igd10umd64 igdumdx32 igd10umd32
RAM card: unknown
Device ID: 0x2e32
Direct2D Enabled: true
DirectWrite Enabled: true (6.2.9200.16571)
Driver date: 11/02/2011
Driver version: 8.15.10.2302
GPU #2 Active: false
GPU accelerated Windows: 1/1 Direct3D 11 (OMTC)
Vendor ID: 0 x 8086
WebGL Renderer: Google Inc. - ANGLE (Intel G41 Express Chipset Direct3D9Ex vs_3_0 ps_3_0)
windowLayerManagerRemote: true
AzureCanvasBackend: direct2d
AzureContentBackend: direct2d
AzureFallbackCanvasBackend: Cairo
AzureSkiaAccelerated: 0Important change preferences
Browser.cache.Disk.Capacity: 358400
Browser.cache.Disk.smart_size.first_run: false
Browser.cache.Disk.smart_size.use_old_max: false
Browser.cache.frecency_experiment: 1
browser.places.smartBookmarksVersion: 7
browser.sessionstore.upgradeBackup.latestBuildID: 20141027150301
Browser.Startup.homepage_override.buildid: 20141027150301
Browser.Startup.homepage_override.mstone: 33.0.2
extensions.lastAppVersion: 33.0.2
GFX. Direct3D.last_used_feature_level_idx: 1
network.cookie.prefsMigrated: true
places. History.expiration.transient_current_max_pages: 103947
plugin.disable_full_page_plugin_for_types: application/pdf
plugin.importedState: true
privacy.sanitize.migrateFx3Prefs: trueImportant preferences locked
JavaScript
Incremental GC: true
Accessibility
Enabled: false
Prevent accessibility: 0Versions of the library
NSPR
The expected minimum version: 4.10.7
Version: 4.10.7NSS
The expected minimum version: 3.17.1 Basic ECC
Version: 3.17.1 Basic ECCNSSSMIME
The expected minimum version: 3.17.1 Basic ECC
Version: 3.17.1 Basic ECCNSSSSL
The expected minimum version: 3.17.1 Basic ECC
Version: 3.17.1 Basic ECCNSSUTIL
The expected minimum version: 3.17.1
Version: 3.17.1Experimental features
An update: as mysteriously as it started last Friday, it fixed itself today (apparently). I left my computer when I'm out in early afternoon after having tried again to open up all sorts of websites in FF with no luck. When I came back from my races it was back to normal - able to open all Web sites again. Obviously, firefox Elves snuck into my house while I was out and fixed what it was. I would like to know what!
-
Error message ordinal 1265 could not be located in the dynamic library IML 32 dll linl
original title: error message
Can anyone provide the solution for "1265 ordinal not found in dynamic library IML 32.dll linl. I'm trying to load a disc with a number of speed up the programmes on this subject. Thanks for any helpHi David77Mad,
1. did you of recent changes on the computer?
2. not the problem only occurs when you use a particular disc?
Method 1
Iml32.dll file is a component common to basic applications and created on former Macromedia Shockwave, now known as the Adobe Shockwave.
It is possible that some third-party programs installed on the computer is causing the problem.
I suggest that you configure the computer in a clean boot state and check if it helps.
To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See section to learn more about how to clean boot.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
- Click Start , and then click run.
- Type msconfig , and then click OK.
The System Configuration utility dialog box appears. - Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
- When you are prompted, click restart to restart the computer.
Method 2
If the previous step fails, then I suggest that you uninstall adobe shockware and check if it helps.
How to change or remove a program in Windows XP
-
message receipt-cannot load the library wxfw.dll Err code: 126
I am trying to download the Weather Channel Desktop and get the message - unable to load library wxfw.dll Err code: 126. I had on my desk before but uninstalled due to some problems and was just to reinstall. I have windows vista on my dell computer. Can anyone help?
Hi Deeheck,1. How do you try to download the Weather Channel Desktop?Weather office will not work with the browser level is set to "high" security, (must be set to medium or lower.) This will allow the controls ActiveX and Active Scripting, which is also required for weather Office Download, install and run correctly.The adjustments can be made as follows:a. open the Internet Explorer browser.
b. click on tools in the menu bar of the browser.
c. highlight the menu drop-down and click on Internet Options.
d. click on the tab that says security.
e. click on the Internet icon in the window
f. for 'medium level', you can click on the 'default' button and then click OK.
g. you can also click on the button "Custom level" and adjust your settings to "enable" Active Scripting and ActiveX controls.
h. downstairs, you can also select 'medium' for your security level and click OK.Uninstall Channel desktopThis is a known issue with the product and will be fixed in a next version. Copy the UNWARY. EXE in the Framework folder in the folder Desktop Weather will solve this problem. The steps are as follows:a. go to start, programs, accessories, Windows Explorer.
b. in the scrolling window left to click from Windows Explorer the + next to my computer, then click on the + sign next to C: drive to expand the view.
3. scroll the menu until you find the Program Files folder.
c. double-click the Program Files folder to expand the view.
d. scroll down to the bottom of this menu for The Weather Channel FW folder and double click it to expand the view.
e. double-click the Framework folder to view the contents.
f. right mouse click on the icon that says ' "RECKLESS.". " EXE"on the shortcut menu, click COPY.
g. go to the toolbar on the window and click the previous button.
h. in this window click on the folder "Desktop Weather" right and in the context menu click on paste.After you uninstall programs and features, you can check the issue.Thank you, and in what concerns:
I. Suuresh Kumar - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
-
Error message: FRM-1808: unable to load the following items
Hi gurus
I copied the forms of my server on my local machine and got the following message when I try to open this form:
Message
FRM-1808: unable to load the following items.
Source Module: test_property_class.fmb
Source object: J_OBJ_GRPAfter that, I see another message to fix some PL/SQL libraries, now I have a plan to fix the missing library, but I don't know how to get rid of the message above...
Appreciate your help. Thanks in advance.
Concerning
Muzz
Forms is unable to find your form tamplate and your PLL.
Check FORMS_PATH (in the registry) and add the appropriate paths where to find them.
Maybe you are looking for
-
Bought an ipod on ebay. Locked and probably stolen.
Well, look, I bought 5 iPod on eBay for a reasonable price. Showed up at my door and it was locked, so I tried to figure out if there was a way to unlock, and it turns out that I have told me that I had to plug it into my computer to unlock it, but t
-
Manually move the e-mail Exchange from iPhone to Mac
I started a new job, about 3 months ago, but still have my old email to work put in place on my phone. I am still getting new emails, but I would like to move these emails (about 130 or almost) on my Mac for archival purposes and get them off my phon
-
How long does it take for revised edition appears?
I downloaded my first iBook iAuthor to the iBooks on 7th store. It took a long time to download. I decided to do a revised edition. I created a short film instead of the trailer that was attached. I downloaded this as a revised version with success.
-
Pavilion dv7 1105tx: maximum ram
Hi, what is the maximum ram I can install on this machine, currently 2x2gb sticks and y at - it a particular manufacturer and type should I purchace, also currently win 7 32 bit can update for win 7 64
-
* Original title: e-mail files I just got my new computer with win10. I added my e-mail account current and most often used, but has any of my files from this account and any unwanted file. These files can be added?