Unable to minimization/maximization if-then-else block

Similar Questions

• Windows 7 - unable to minimize, maximize or close open windows__

  Dear Sir

  After installing win7 sp1 beta, I am unable to reduce to a minimum - maximize or close / open the windows.

  Uninstall win7 sp1 beta & restart ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Don't right-click on my tabs on the toolbar and see the minimize/maximize/close/etc...

  So I have a LenovoT61, with windows 7.  I can are more done right click on my tabs on the toolbar and see the minimize/maximize/close/etc... Even when I have itunes or something to do before I have something else I want to minimize all tabs at the top, then open them re open one by one.  They will not pull up in front of eachother.  Any ideas?

  Original title: cannot click on the icons in my tasks

  Hello

  I can understand your annoyance in that regard. I appreciate your effort posting this query to the Microsoft Forums and I'll try to make sure that the problem is solved.

  1 are you referring to the specific toolbar or toolbar of the file folder or Internet Explorer or are you referring to the taskbar toolbar?

  2. did you of recent changes to the computer before this problem?

  This problem may occur following a conflict of third party software or due to corrupted Windows.

  See methods below to resolve this issue.

  Method 1:

  I suggest to place your computer in safe mode and check the number.

  Check out the link to start the computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  If the problem is solved in a safe mode then put the computer to boot is a way to eliminate the conflicts that occur when you install a program or a software update.

  Check out the article from the link below place the computer in a clean boot.

  http://support.Microsoft.com/kb/929135

  Note: Please see how to reset the computer to start normally after the boot minimum troubleshooting after you perform the clean boot troubleshooting steps.

  Method 2:

  If the problem persists, run SFC scan.

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  See the link below to launch the SFC scan.

  http://support.Microsoft.com/kb/929833

  Method 3:

  Run Microsoft Safety scanner to eliminate viruses, spyware and other malicious software.

  Check out the link below to download and run Microsoft Safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note : The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Customer update Windows OS 8.1 - minimize, maximize and close buttons

  This one is a little weird. Happens on my client, to run from the client on a PC or a zero client IE - Windows Explorer, and administrative tools windows not visible without minimize, maximize, or close the buttons, although hovering above where they should be in the upper right of the frame window shows the name of the button for this post and clicking on where the button should be visible is the position of this button. I tried other themes, such as high contrast, and they are still not visible.

  I googled the problem, but have not seen anyone else with the issue (yet). The applications of MS Office and many other applications normally display the buttons. I've attached a screen shot from the corner of a window for reference.

  I had the same problem with my VM Windows 8.1.  If you click on the location where the buttons should be, it always works as they are there.  Someone else mentioned that it was a problem with the version of VMware Tools installed in the virtual machine.  I opened the Device Manager on the computer virtual and then uninstalled the VMware display adapter, including the driver software.  After that I scanned for hardware changes and he reinstalled the display adapter using a windows driver.

• Minimize, maximize and close buttons missing in Vista

  No minimize, maximize and close buttons are on Vista, is by clicking in the appropriate box performs the action.

  Disabled the transparency of Vista, then power. When I open Firefox (narmally, not in safe mode) buttons have reappeared. Seems related to the "tabs on top" setting, as the "list all tabs" button (normally at the end of the tabs, appeared at the top on the right, where the "Close" button should be.

• Minimize/maximize/close buttons does not...

  Minimize/maximize/close buttons do not work when you run Aero.  Whenever I change my Aero, reduce it and expand buttons work but the close button still does not work.  This happens with all the windows and I'll have to use the Task Manager to close the windows and I have to close the task with the exit button Manager because the close button does not work on either.

  Hello

  Thank you for using the Microsoft Windows Vista Forums.

  I will need some additional information to help you best.

  O if it works well before?

  Ø summers - get you any error message?

  O have changes made to your computer recently?

  In the meantime, follow the instructions below that may help you resolve the issue.

  Method 1:

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot

  Step 2: Enable half the services

  Step 3: Determine whether the problem returns

  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns

  Step 6: Resolve the problem

  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  After checking the problem, turn the computer back to the Normal mode.

  Uninstall or update the program that is causing the problem.

  Method 2:

  Windows Live OneCare safety scanner is a free service designed to help ensure the health of your PC.

  • Check and remove viruses
  • Get rid of junk on your hard disk
  • Improve the performance of your PC

  Click on the link below for Online Virus scanner.

  http://safety.live.com/

  Check whether the problem is resolved.

  Method 3:

  Analysis of auditor of file system (CFS) that might help you resolve the issue.

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.

  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command prompt, the following line, and then press ENTER:

  sfc/scannow

  When the analysis is complete, test to see if the problem you are experiencing is resolved. If the problem you are experiencing is not resolved, use the procedure that is described in the section "the System Restore tool.

  Follow the instructions in the link below for more information on scan SFC.

  http://support.Microsoft.com/kb/936212/

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Minimize, maximize and close in the toolbar

  Original title: toolbar missing

  My Dell notebook was expelled to be repaired. I received back today.  The toolbar display the minimize, maximize and close icons is missing.  The toolbar is on the page of Google, but not on any other page.

  Hi Patty, if Dell restored your computer to factory new condition and put Windows 8 on it, you will need to get the 8.1 update and the update August 2014 next year before these options appear back in the programs in full screen.  The title bar buttons (min/max/close) have been added to the 'metro' environment in these two updates.

  They have likely already downloading in the background, so you can just wait a few days, reboot when it asks, and subsequently you will be offered all the updates that it must be "current."

  Or you can speed along if you wish. There is only a single update that you need as a precondition before the 8.1 update (learn more and get it here), and then you'll be most of the way up to the current level of update.

• 6.6 without minimize/maximize/close Lightroom (Win10)

  The Menu bar on Lr6.6 is different from all my other apps in Windows 10: it's gray (not blue) and it is not the familiar minimize, maximize, and close icons at the top right.

  I have to use Ctrl + Q or Alt + F4 to close Lr6.6.

  Some features of the keyboard are not Win10 standards:

  Windows + left and Windows + right to not work,.

  Windows + up and Windows + down are not going between a window and full screen, but the size of the window can not be changed by click-and - drag.

  How can I rectify this?

  Just found the answer myself: SHIFT + F (Menu bar disappears completely) then SHIFT + F again and the menu bar is back to normal.

  Sorry to have troubled you.

• start end in if then else.

  Hello
  
  I've seen people to help
  
  If 1 = 1 then
  
  HOMELESS: = 9;
  
  on the other
  
  HOMELESS: = 10;
  
  end if;
  
  or
  
  
  If 1 = 1 then
  Start
  HOMELESS: = 9;
  end
  on the other
  Start
  HOMELESS: = 10;
  end;
  end if;
  
  (1) which is good. (good coding practices)
  (2) is it wrong by removing start end if then else.
  
  what I show begin end can be used for the management of exceptions, if it can be used for any other things please tel me.
  
  
  Yours sincerely

  944768 wrote:
  what I show begin end can be used for the management of exceptions, if it can be used for any other things please tel me.

  The previous poster gave you good links.

  In your example, I think that putting BEGIN/END in each IF/ELSE condition is rare and would not be useful, so I'd omit them.

  Nested BEGIN/END blocks can be useful If you want to:
  (a) put a label, or
  (b) DECLARE a variable that will be used only within that block, and/or
  (c) write a specific EXCEPTION handler.

  Since your example only none of that above, I don't see the use of these nested blocks. When something is useless, do not.

  P.S. If the goal is to write modular code, anonymous blocks can declare functions and procedures that can be called from the main block.

  set serveroutput on
  DECLARE
    PROCEDURE proc_inside(p_msg in varchar2) IS
      BEGIN
        dbms_output.put_line(
          'Message from procedure within an anonymous block: '||p_msg
        );
      END proc_inside;
  BEGIN
    proc_inside('Message A.');
    proc_inside('Message B.');
  END;
  /
  
  anonymous block completed
  Message from procedure within an anonymous block: Message A.
  Message from procedure within an anonymous block: Message B.
  

  Published by: Ashton stew on March 10, 2013 16:46

• ORA-19510: unable to set the size of the blocks of file ' ' (blocksize =)

  I checked archivelog dest everything ok, power logs archived bit time, everything ok, I wondered what could cause this and how to solve this problem permanently.
  
  
  Log queue alerts
  Fri Jul 31 06:10:08 2009
  Errors in the /oracle/admin/gdwp/bdump/gdwp_arc0_1220702.trc file:
  ORA-19510: unable to set the size of the blocks of 74905 for the file ' / archive/gdwp/gdwp_1_18207_654896926.arc ' (blocksize = 512)
  ORA-27037: unable to get file status
  IBM AIX RISC System/6000 error: 2: no such file or directory
  Additional information: 9
  Fri Jul 31 06:10:08 2009
  Errors in the /oracle/admin/gdwp/bdump/gdwp_arc0_1220702.trc file:
  ORA-19510: unable to set the size of the blocks of 74905 for the file ' / archive/gdwp/gdwp_1_18207_654896926.arc ' (blocksize = 512)
  ORA-27037: unable to get file status
  IBM AIX RISC System/6000 error: 2: no such file or directory
  Additional information: 9
  Fri Jul 31 06:10:08 2009
  Arc0: Error 19510 closing log file archive ' / archive/gdwp/gdwp_1_18207_654896926.arc'
  ARCH: Stopped archiving, error occurred. Will continue to retry
  Fri Jul 31 06:10:08 2009
  ORACLE Instance gdwp - archive error
  Fri Jul 31 06:10:08 2009
  ORA-16038: log 1 # 18207 sequence can be archived
  ORA-19510: unable to set the size of the blocks of file ' ' (blocksize =)
  ORA-00312: thread 1 1 online journal: ' / db01/oradata/gdwp/redo01.log'
  Fri Jul 31 06:10:08 2009
  Errors in the /oracle/admin/gdwp/bdump/gdwp_arc0_1220702.trc file:
  ORA-16038: log 1 # 18207 sequence can be archived
  ORA-19510: unable to set the size of the blocks of file ' ' (blocksize =)
  ORA-00312: thread 1 1 online journal: ' / db01/oradata/gdwp/redo01.log'
  Fri Jul 31 06:10:11 2009
  ARCH: Stopped archiving, error occurred. Will continue to retry
  Fri Jul 31 06:10:11 2009
  ORACLE Instance gdwp - archive error
  Fri Jul 31 06:10:11 2009
  ORA-16014: log 1 sequence # 18207 not archived, no available destinations

  DBA2008 wrote:
  Notes 560204.1 suggest that to get rid of the generation of the trace file, is - it safe?

  I won't read the note at the moment but would surely say they told you to check the destination where the files are current. Did you do that? Raise a SR with OSS, to get their approval before doing something like what you try. Its you only who would face consequences, good or bad, no one else so better take a safe approach and the first approval of OSS.

  HTH
  Aman...

• Minimize, maximize, and exit buttons are not on the theme.

  I installed a theme on Windows 7 and minimize it, maximize and exit buttons do not have Firefox, even with the default theme.
  Is it possible to make the keys not linked Windows, or simply corresponding to the theme?
  Imgur mirror: http://i.imgur.com/FSEJFH9.jpg

  Well, this is not possible. Minimize, maximize, and close theme button is defined by the system, or in your case Windows. So, if you want to change this theme to match with Firefox, you will need to change the theme of windows by a correspondent.
  Using the default windows theme is recommended for good match because the theme designers create their themes as standard. so, it must match each theme of Firefox. Using the default minimize, maximize, and close windows theme will perfectly match with the theme of your browser or change your theme of browsers to match with the theme of the system. Anyway your choice.
  Thank you.

• Minimize, maximize and Quit buttons appear in black

  Windows 7, open Firefox by using the icon on desktop/toolbar the minimize, maximize and Quit buttons are not displayed correctly.

  However, when you open a link to a mail electronics (client Thunderbird) buttons to minimize, maximizes and Quit appear to be blackened.

  Restart Firefox in safe mode, the problem is not resolved. Any suggestions would be welcome.

  Thank you!

  Once you are sure that the problem has disappeared;
  Please mark your last post as solved so other will know.

• Lost minimize, maximize and close buttons after update to 8.1 windows

  Today, after updating my windows 8.1 PC, I noticed him minimize, maximize and close buttons disappeared from my browser. It is an empty box of blue in the upper right now, with no functionality. How can I get my back buttons?

  Hello
  Thank you for your suggestions.
  Fortunately, just after I started this thread the problem magically itself. The problem could be the style - add on. I've changed the style several times to try to resolve this problem, because I noticed that my custom style disappeared as well, and after that the icons reappear.
  Problem solved!

• Firefox minimize, maximize, close icons become inoperative all too regularly. Opening of the menu Tools/options restores the functionality. What is going on?

  As far as I recall, this started that occurred several months ago. Firefox 21.0

  Hi Whateez,

  I understand that you have problems with him minimize, maximize and close icons in your Firefox browser. Is - what the whole browser crash when this happens, or that these buttons?

  Please try temporarily disabling the extension Norton Protection against vulnerabilities 11.3.0.9 - 5 . Still problems?

  You can also try the Reset Firefox feature that easily corrected most of the problems with your browser.

  Please let us know if this solves your problem, or if you have any questions or comments.

  Thank you!!

  -Ralph

• I need to remove "minimize, maximize, close" buttons on the mode full screen

  I can remove all the buttons (like refresh, back, forward, address bar, etc.), but the small right 3 "minimize, maximize, close" buttons I can't delete, how can I do it with userChrome.css or another option.
  Because I can close firefox out of the full screen and clicking on the menu of archive with the ' Alt ' key.
  I don't want this small 3 buttons, I can hide and show permanent.

  I hope to explain correctly
  Thank you very much

  Add code to userChrome.css below default @namespace.

  • http://KB.mozillazine.org/userChrome.CSS

  ---

  @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
  
  #autohide-context { display:none!important; } /* hide context menuitem "Exit Full Screen Mode" */
  #window-controls  { display:none!important; } /* hide window controls in full screen mode */