Unable to mount the system of the boolean object to type the string of system

Similar Questions

• Adding NFS - error: unable to mount file system

  Hello

  When you try to add my NFS in VSphere (version 1), I get the following error at the end:

  *Error when configuring the host: NFS error: unable to mount filesystem: unable to connect to the NFS server*.

  To add the NFS, I did the following:

  1 created VMKernel (entered a static IP, subnet mask, default gateway address, enabled checkbox Vmotion) on the same vSwitch as Service Console

  2. click on add storage - NFS

  3. Enter the IP address of the server, a folder, I created on the NFS (/ etc/vmware) and gives him a name of random data store (TESTNFS).

  4. click on finish

  Next, I get the above error.

  Any ideas?

  N ° IP address must be the one you use for the vmkernel NFS on the ESX Server. The syntax of the file "/ etc/exports ' is:

  = Send 'Assignment' to 911 for only $999999,99! =

• Unable to capture the String [] to a JavaCallOut

  Hi all
  
  I am applying where I have to make a legend of java that accepts the string and returns an array of strings as output. "The only java class works well but when I do the legend of Java and pass the string I get *" < con: java-Ref content = "jcid:-31630335:136f3572827:-3925 ' xmlns:con ="http://www.bea.com/wli/sb/context"/ >" * as a response. " How can I access the variable table in OSB?
  
  Kindly help me in this.
  
  Concerning
  Flavian.

  in the legends of Java, I would avoid types that are not in THE list of supported types:

  http://docs.Oracle.com/CD/E13159_01/OSB/docs10gr3/eclipsehelp/ui_ref.html#wp1290279

  java.lang.String [] is supported for the ENTRY ONLY

  Simply return some CSV in a string and you will be happy
  or return an XmlObject containing several elements

  A con: java-thingie content can be dealt with in another legend of Java only rather than a stream of messages of OSB...

• Equium M50-216: I am unable to mount the module memory

  I could not (physically) to fit more memory Ram DDR2 PC2-4300 (200 pin SODIMM to 533 MHz). Can you confirm that this is the correct memory of the standard. Thank you

  Equium M50-216 supports PC2700 DDR - RAM modules.
  If you want to upgrade the unit, you must use these modules:
  PC2700 256 MB (PA3311U - 2M 25)
  PC2700 512 MB (PA3312U - 2M 51)
  1024MO PC2700 (PA3313U-2M1G)

  Unit of PA3313U-2M1G supports 1024 MB PC2700 DDR SODIMM (333 MHz)

• VMware-mount has the ability to mount the dynamic disk?

  I understand that there are 2 types of VMDK / disks: basic and dynamic. I would like to know if vmware-mount exe has the ability to set up dynamic disks? If so, how?

  I tried to use the command vmware-mount as:

  " X: vmware-mount ' [storage1 | ] http://communities.VMware.com/community-document-picker.jspa?communityID= & subject = storage1 "[ ] VMDKName.vmdk ' /h:IPAddress u:UserName /s:Password i:DataCenterName/vm/VMName

  but he did not succeed. It gives the following error, even if no one is using the VMDk nor is the machien powered:

  "Unable to mount the virtual drive. The disk can be used by a virtual machine, may not have enough volumes or mounted under a different drive letter. If not, check that the file is a valid virtual disk file. ».

  Any help is appreciated.

  Thank you

  Matton

  VMware-mount current does not support dynamic disks.

  Thank you

  Annick

• Impossible to mount the drive external HARD under Ubuntu Linux - file system damaged and MFT

  I get the following error when I try to mount my external hard drive on my Ubuntu.

  UNABLE TO MOUNT
  Error mounting/dev/sdc1/media/khalibloo/Khalibloo2: command-line ' mount t 'ntfs' o ' uhelper = udisks2, nodev, nosuid, uid is 1000, gid = 1000, ask dm = 0077, fmask = 0177 "" / dev/sdc1 "" / media/khalibloo/Khalibloo2 "' came out with the exit status no lame 13: ntfs_attr_pread_i: ntfs_pread failed: input/output error".
  Cannot read MFT, mft = 6 count = 1 br = - 1: input/output error
  Could not open the FILE_Bitmap inode: input/output error
  Failed to mount ' / dev/sdc1 ': input/output error

  NTFS is incompatible, or there is a hardware failure, or it's a SoftRAID(4)/FakeRAID hardware. In the first case run chkdsk /f on Windows, and then restart Windows twice. Using the /f parameter is very important! If the device is a SoftRAID(4)/FakeRAID then frst activate and mount a different device under the/dev/map/directory, (for example/dev/map/nvidia_eahaabcc1). See the documentation for 'dmraid' for more details.

  It is not mount on windows either: "i/o device error".

  This is a disk with a single partition hard ntfs

  Of course, I tried chkdsk /f. reported several file segments as unreadable, he didn't say if he fixed them or not (apparently not). also tried with the indicator/b.

  ntfsfix reported as corrupted volume.

  TestDisk was able to correct a small error with the partition table by adding the '80' for the active partition indicator (only). TestDisk also confirmed that the boot sector was very good and it corresponded to the backup. However, when you try to repair the MFT, he could not read the MFT. He could not also the list of files on the hard drive. It says file system may be damaged.

  Active @ also shows that the MFT is missing or damaged.

  I tried to replace the USB cable. Has not changed anything. I tried to update the driver. Windows reported that he was already up to date. Yes, the pilot has been activated.

  So, how can I fix the file system? or MFT? or the I/o device error?
  I used the HARD drive for months. This problem started 2 days ago. I also tried to mount it on other computers, without success.

  Hello

  I'm sorry to read about problems with your drive.
  Unfortunately, I think that the question is misplaced a bit as your case appears to be the health of your rather external HARD drive that a specific problem related to Linux.

  To add clips, if the tools you use have failed to fix your drive, then I do not think that a user 'normal' forum will no longer.
  I know it's a fine recommendation and probably just add salt in your wounds: If you really care for files, do a sector backup before doing any file system / partition own modifications.
  The reason is very simple - if the tool you use has made a mistake when judging what actions are the right ones, and submit these changes, you move your goal - and fast!
  Instead of repairing, the tool can simply corrupt data even further.
  Any subsequent change aggravates the disorder exponentially.

  Judging by the details in your message, I'm sorry to say that I think your drive is defective, or at least the data is lost.
  Of course some companies will probably be able to restore it, but that normally costs a fortune.

  Unless you are willing to spend astronomical amounts of money on data rescue, so I suggest to accept data loss and look at what you can do with the HARD drive.
  Try to format. No problem, this indicates the drive is defective and must be replaced.

  Sorry for so little help.

  Tom BR

• OSX 10.11.2 on end of 2008 with the graphic card Nvidea Quadr 4000 MacPro is unable to open the Nvidea driver manager in System Preferences, CUDA work and updates. Any suggestions? Have tried to install updtyer Combi for OSX.

  OSX 10.11.2 on end of 2008 with the graphic card Nvidea Quadro 4000 MacPro is unable to open the Nvidea driver manager in System Preferences, CUDA work and updates. Any suggestions? Have tried to install Combi updater for OS x, the problem persists.

  If I remember someone else reported the same problem yesterday and Nvidia suggested to reinstall OS x. If yo boot into Recovery and reinstall without formatting nothing should be lost but backup before just I case.

• The system is unable to complete the update of security for Windows XP (KB2661637).

  Original title: update security for Windows XP (KB2661637)

  The system is unable to complete the update of security for Windows XP (KB2661637).  How can I get my system to accept the update?

  Hi Joseph,.

  You receive messages or error codes?

  You can reset the default Windows Update components and check if you can install the update.

  How to reset the Windows Update components?

  You can also try to download the standalone update package and check.

  Update security for Windows XP (KB2661637)

• Unable to run the system restore, or any audio file...

  I am unable to run the system in normal mode or safe restore.  When I try to run rstrui.exe a pop up box appears and wants to know what program I want to run this file.  Also when I go to my control panel I can't open anything even not my add or remove channels I get an error msg saying c:\windows\system32\rundll32.exe - application not found - even when im in safe mode appears the same box... help would be appreciated... :-)

  It sounds like you lost the file association for .exe files.
  Visit the following site and follow the instructions to restore your .exe file associations.  Be sure to read the note at the top that applies specifically to the .exe file associations:

  <>http://www.dougknox.com/XP/file_assoc.htm >

  HTH,
  JW

• I have a linux operating system and I would like to remove it and install windows xp. I'm afraid that if I wipe the drive, I'll be unable to boot the windows xp disc. Is this true?

  I have a linux operating system and I would like to remove it and install windows xp. I'm afraid that if I wipe the drive, I'll be unable to boot the windows xp disc. Is this true? What is the best way to remove the linux operating system and install windows xp?

  original title: HOW I CAN UNINSTALL LINUX OPERATING SYSTEM

  If there is absolutely nothing on the disk you want, just format the drive and install Windows XP:

  1. start from the CD. You may need to change the first boot to a CD device in the BIOS. To do this, when you switch on the look for a configuration message indicating what key to start typing, F2 and del are commonly used. The message appears for very long and it you miss, you have to restart the computer. In the BIOS, look for a section that contains the boot sequence, change it to CD, save it and let the computer to restart.

  2. the installation sequence is answering the message press any key to boot from the CD, and then press ENTER to set up Windows, press F8 to accept the EULA, delete the partition, press ENTER, type L to confirm delete, type C to create a partition, choose (Quick) format. Then begins the installation and restart will therefore ignore the subsequent message to press any key to boot from the CD-ROM.

  3. actual installation will begin and takes about 30 minutes. Finally, download all the missing Windows service packs and other updates.

• Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel. Got the unable to create the specified task

  Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel.
  Got the unable to create the specified task

  Hello

  What is the exact error message received when the problem occurs?

  Methood 1:

  Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps in the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833 

  Method 2:

  You can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  I suggest to put the computer in a clean boot state, and check if the problem persists, see the link:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: See step 7; Reset the computer to start as usual after troubleshooting is performed.

  Method 3:

  You can temporarily disable the security software and check if the problem occurs. Check out the following link to do the same thing:

  http://Windows.Microsoft.com/en-GB/Windows-Vista/disable-antivirus-software

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps! Let us know if you need more assistance.

• I'm unable to install the updates on my system

  I'm unable to install the updates on my system. Arte updates installed, but they are not configured properly so changes are returned and the end system day are not up to date please help. Thank you

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

   

  or please repost your question in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• "Unable to make the system restore point", when I ran registry cleaner Norton

  I just installed Norton 360 on the desktop with Windows Vista Home Premium OS. When I ran the registry cleaner, the error message appeared saying: "Unable to do the system restore point" . I contacted Norton, but they said it's nothing to do with Norton, I need to contact Microsoft. In addition, as suggested in one of your responces, I tried to create manually restore point, but I don't see the system protection tab on my system properties pop-up screen.

  I just installed Norton 360 on the desktop with Windows Vista Home Premium OS. When I ran the registry cleaner, the error message appeared saying: "Unable to do the system restore point" . I contacted Norton, but they said it's nothing to do with Norton, I need to contact Microsoft. In addition, as suggested in one of your responces, I tried to create manually restore point, but I don't see the system protection tab on my system properties pop-up screen.

  I don't know what prompted to run registry cleaner. I would sincerely say that you read the following article first before you take back this terrible task to play with the registry.
  Why you should not run registry cleaner:
  http://www.edbott.com/weblog/?p=643

  Here is the tutorial on how to create a system restore point:
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  t-4-2

• RDPCLIP. EXE missing startup file (system32 dir). Unable to restore the system because of missing file unspecified.

  Windows 7 (new machine, not updated). Autoruns shows this file RDPCLIP. EXE be found at startup. This file is usually located in the System32folder. Unable to restore the system of time earlier because of unspecified missing file (rdpclip.exe?). System seems to be runnuing normally except these two questions. Occasional freezes (once just by renaming the downloads folder). How can I get
  new file restored to the version of Windows 7?

  Note: CLIP.exe is in the System32 directory.

  Hi bigdome6984,

  If your machine acts as a Terminal Server, i.e. someone else connects to your computer using remote desktop, then rdpclip.exe will be loaded on your computer as part of the functionality of Server Terminal Server.

  RDSCLIP is loaded on the computer, allowing other machines to connect via Remote Desktop.

  It should be found at the following registry location:

  HKLM\SYSTEM\CurrentControlset\Control\Terminal Server\Wds\rdpwd\StartupPrograms

  Important Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756

  I hope this helps!

  Kind regards
  Gokul - Microsoft Support

• Restore the system to a Restore Point fails: System Restore was unable to extract the original copy of the restore point consoleDirectory.

  I can create restore points and when updates are installed the system automatically creates a restore point. The problem is that I can't get the system to restore to a restore of these these points.

  System Restore was unable to extract the original copy of the restore point directory

  Source:%systemroot%\registration

  Destination: ComPlusStaging

  Hello John R H,

  Are you able to restore system successfully on a different date, or that you get the same result?  I looked through this thread and was curious to know why you want to perform a system restore?  Having other issues in addition to what you have described?

  Try to make a last good known Configuration and see if you are able to perform a system restore.

  Last good known Configuration:

  http://Windows.Microsoft.com/en-us/Windows7/using-last-known-good-configuration

  Please let us know status.