Unable to play RollerCoaster Tycoon: corkscrew Follies after installing the expansion pack.

Similar Questions

• The installation of Zoo Tycoon 2 in Windows 7, now I can not install the expansion packs.

  Thanks to the person here who has posted the trick to set virtual memory to 2048, I got edition of Zoo Tycoon 2 guards running. Now that I'm trying to add expansion packs, I get the message that I did not install Zoo Tycoon first, and that I need to install it. What?

  Before using the virtual memory fix, I found here, I tried to run in XP mode, using the also found instructions here. I wonder if this is the reason why I get the error message, and if so, should I uninstall and reinstall without changing the compatibility mode?

  Running Windows 7 Professional 64-bit. I solved my problem by uninstalling Zookeeper Collection, replace and reset maximum memory of 2048.

  Once I thought I had installed as an administrator or as the account of my children, I have had no problem by uninstalling Zookeepers Collection and put it back. Install the expansion packs was easy after that.

  I'm going to bookmark the Zoo Tycoon Support site for later use. Thank you.

• Unable to print on hp 1320 even after installing the upd

  I'm unable to print (even the test pages) on my printer. I tried installing the upd and after days of work on the subject, was finally able to print. But I find that it will not be printed once again today.

  I also notice that there are 2 printers installed. One is called HP PCL5 to universal print and other series hp Laserjet 1320 UPD PCL5. I don't know who I should focus on both printers. I was able to get them to print but now can't get either to print. It is connected to a netgear router.

  Hello

  Please follow the steps in the link below to fix the problem:

  http://h20566.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=410622&docid=emr_na-c00026681&docLocale=en_US

• Unable to access Internet Explorer after installing the Service Pack 3. Get the error of "Data Protection".

  Service Pack 3 problems

  Recently downloaded service pack 3 and cannot get into Internet Explorer 8 as 'Data Protection' will not allow.  Anyone know how to fix this?

  Hi Courtney,

  ·         Are you referring to Data Execution Prevention (DEP)?

  If so, check if turn off DEP support. To do this, follow these steps.

  a. click Start, click run, type sysdm.cpland then click OK.

  b. on the tab Advanced , under performance, click settings.

  c. on the Data Execution Prevention tab, use one of the following procedures:

  ·         Select the check box next to the program that you want to turn off DEP for and then click OK.

  ·         If the program is not in the list, click Add. Navigate to the folder Program Files , search for the executable file of the program (it will have the .exe extension) and then click Open.

  For more information on DEP, see the following article.

  A detailed description of the feature Data Execution Prevention (DEP) in Windows XP Service Pack 2, Microsoft Windows XP Tablet PC Edition 2005, and Windows Server 2003

• Unable to make or receive phone calls after installing IOS 10

  Unable to make or receive phone calls after installing IOS 10

  Hi Drovers run,

  I understand that after updating your iPhone to iOS 10, you are more able to send or receive phone calls. I know it's important to be able to use your iPhone as a phone, so I'm happy to provide assistance.

  Read this article to help to make and receive calls:
  If you cannot make or receive calls on your iPhone - Apple Support

  Thank you for using communities Support from Apple. See you soon!

• Adobe reader has disappeared after installing the update or unable to re - install, already says "the application installed.

  Adobe reader has disappeared after installing the update or unable to re - install, already says "the application installed.

  The adobe reader program no longer exist in my C drive.

  I use windows 8 and tried reinstalling countless times, disable the anti-virus, restarted my computer, etc.. Have also tried uninstall adobe, but the program does not exist more...

  Please help because my exams are in 5 days and all my study material must be opened with pdf!

  Thanks in advance.

  Hi, Fabien,

  Is - this directory exists on your system? -C:\Program Files (x 86) \Adobe If Yes, do you think that Adobe Reader folder in there?

  Please use the tool on your system: http://labs.adobe.com/downloads/acrobatcleaner.html

  Reinstall Acrobat Reader DC on your system? Adobe - Adobe Acrobat Reader DC Distribution

  Kind regards
  Rahul Tyagi

• Error: "Flight Simulator could not load some program files and will now leave." at the start of the game after installing the reduction acceleration expansion Pack.

  Hi I just bought a copy of Microsoft Flight Simulator gold edition. and after installing and playing on the deluxe edition, I decided to add the extension of acceleration. and after installing the extension, the game no longer works it comes up with an error message saying "Flight Simulator could not load some program files and will now stop. Please reinstall Flight Simulator to restore or repair the installation of the program. ».

  Now, after a few days looking for a response, I decided to ask the guy who made the game.

  The error message also appears when I download just 2 service packs of Microsoft also.
  I have a laptop HP 630 with a processor intel core i3 - 2350 m cpu @2. 30 ghz, 2 GB ram, windows 8 pro 64-bit

  Original title: fsx gold edition...

  Try this, it worked for me:

  (1) uninstall normally from the control panel.

  Reinstall 2) in the Windows directory (C: here)

  (3) install SP1, SP2

• After installing the version 36.0 whenever I go to a Web site, I get "server not found" and I have to refresh

  After installing the version 36.0 (yesterday) on the desktop and laptop, whenever I go to a site that I get "server not found" and I update the site to access.

  I checked my firewall and it is configured correctly.

  And I changed the proxy for 'no proxy '.

  Still not fixed.

  Thanks in advance.
  David

  I went back to the 35.0.1 version and it seems to have solved the problem.

• PC Pavilion laptop: no sound on Pavilion g6 after installing the new battery CMOS

  I have a Pavilion g6z - 1 d 00 CTO Notebook PC, model A2F43AV number.  It came with Windows 7 Home Premium, and I upgraded the operating system to Windows 7 Pro (64 bit).

  The problem is that I did not sound, either through headphones or the speakers even if the Volume is set at 55. I first noticed the audio problem after replacing the CMOS battery, as the laptop is 4 years old and he gave me intermittent wireless connectivity problems.  After installing the new battery CMOS, I noticed the wireless driver was missing and downloaded/installed.  Everything was fine except the audio.  Then I reset the BIOS but nothing there as the BIOS version is v.49, and it is the most recent.

  I have also downloaded/installed the driver audio and rebooted the PC.  Still, there is no noise.

  Finally, I have checked the audio drivers and the reporting system they work without any problem.

  What should I do next?

  Thanks, Terry

  @Terry57

  Thanks for the reply,

  I was under the impression that these links would take you to guide step by step, however, it seems that they do not work,

  However, I have provided details below:

  To perform a hard reset on a computer equipped with a removable battery, follow these steps:

  1. Turn off the computer.

  2. Remove the computer from the docking station or port replicator.

  3. Disconnect all external devices from devices such as USB, external displays storage devices and printers.

  4. Disconnect the power adapter from the computer.

  5. Remove the battery from the compartment to batteries.

  6. Press and hold button power for about 15 seconds, remove any residual electric charge capacitors that protect memory.

  7. Insert the battery and plug the power adapter into the laptop, but do not connect peripheral devices.

  8. Press the power button to turn on the computer.

  9. If a boot menu appears, use the arrow keys to select start Windows normally and then press the Enter key.

  10. After you have reconnected each peripheral device, run Windows Update and HP Support Assistant to update all device drivers.

  To perform a hard reset on a computer equipped with a sealed or non-removable battery, follow these steps:

  1. Turn off the computer.

  2. Remove the computer from the docking station or port replicator.

  3. Disconnect all external devices from devices such as USB, external displays storage devices and printers.

  4. Disconnect the power adapter from the computer.

  To perform a system recovery, this link should work: click here

  Keep me posted for any technical assistance,

  Kind regards

• Drawing objects in Firefox and Thunderbird after installing the graphics card MSI R6850 of AMD

  After installing the new graphics card (MSI R6850 CYCLONE 1GD5 PE/OC), pilots the latest on Windows XP 32-bit, I frequently meet with Mozilla Firefox 8.0 and Mozilla Thunderbird 8.0 drawing artifacts. The problem presents itself as a horizontal black bands or model checker color scattered. It occurs especially when the child (like the Download Manager) passage of another application for Firefox or Thunderbird or when to switch to a window for Firefox. It affects the entire application or only some rectangular (region clearly who was redesigned due to change of application). Then repaint (such as switch between Firefox tabs) usually solves the problem. This is just visual, the behavior is not affected. The problem never happened to any other application so far. Any ideas? Any who have experienced the same problem? Thanks in advance.

  Zbynek

  P.S. Here's the screenshots for the two problems:

  http://astrofoto.euweb.cz/tmp/black_stripes.jpg
  http://astrofoto.euweb.cz/tmp/color_boxes.jpg

  Try turning off hardware acceleration.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  If disable hardware acceleration works then check if there is an update available for your graphics display driver that corrects these problems.

• Cannot open the safari link after installing the iOS 9.3

  Cannot open the safari link after installing the iOS 9.3

  This is a common problem and there is currently no permanent solution yet.

  Try turning off JavaScript under settings - Safari - Advanced.

  I think that apple will figure things out soon.

• Satellite A300 - after installing the Vista SP1 no longer start

  Hello

  I brought my Satellite A300 friends tonight to upgrade Vista to Windows 7.

  The disc of Windows 7 told me before he could upgrade the Vista would need a service pack 1, so I started to install the service pack and when he went to restart mode then it spent in step 2 restart and all of a sudden the screen went black and a load of a number appeared and it goes no further the system frozed.

  Problem now is that Windows does not start and it will not work in safe mode and I'm afraid that all my friends photo and files are now gone.

  I'm empty!

  Can anyone help?

  Hello

  Now, what happens if you try to start Windows? You get an error message or something else?

  Normally before you install something like a Service Pack or Windows 7 you must back up all the files first and this must be done at any time normally ;)
  I think you can only recover data if you put the HARD drive into an external HARD drive enclosure. Then, you can save the data on another computer.

  After that, you can do a clean Windows 7 or alternative facility. install Vista using Toshiba recovery disc, then Windows 7.

  Welcome them

• My MBP in trouble after installing the Wacom Intuos driver.

  My MBP takes almost 5 minutes to start after installing the Wacom Intuos driver, I remove and reinstall but no change!

  and it seems that the machine was very unstable and very slow, sometimes the beach ball appears and no response for a few minutes and works again!

  I try to contact Wacom support in Hong KONG but still no body to answer my call...

  Can be resolved by upgrading to IE captain? Thank you very much!!!

  Wacom driver: 6.3.15 - 1

  News by cheque to be:

  EtreCheck version: 2.6.6 (226):

  MacBook Pro (13 inch, late 2011)

  MacBook Pro - model: MacBookPro8, 1

  1 2.4 GHz Intel Core i5 processor: 2 strands

  4 GB of RAM expandable

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 87 - SN = W01457N9TD3BA

  Intel HD Graphics 3000 - VRAM: 384 MB

  Color LCD 1280 x 800

  OS X Mavericks 10.9.5 (13F1507) - since the starting time: 4 hours

  Disc information:

  HGST HTS721010A9E630 disk0: (1 TB) (rotation)

  EFI (disk0s1) : 210 MB

  1 t MBP (disk0s2) /: 999,35 go-go (590,22 free)

  HD (disk0s3) [recovery] recovery: 650 MB

  MATSHITADVD-R UJ - 8À8)

  Configuration files: (Does that mean?)

  / etc/hosts - Count: 57

  Startup items: (Does that mean?)

  PenTabletDriver: Path: / Library/StartupItems/PenTabletDriver

  Startup items are obsolete in OS X Yosemite

  Launch system officers: (Does that mean?)

  [loading] com.apple.RemoteDesktop.plist -invalid signature!

  [loading] com.apple.screensharing.MessagesAgent.plist -invalid signature!

  Top of page process CPU: (Does that mean?)

  55% mdworker (3)

  4% kernel_task

  4% WindowServer

  2% fontd

  2% hidd

  MacBook Pro, OS X Mavericks (10.9.5)

  Speed up boot times-

  Start time - speed (2)

  Start time - speed (3)

  file/etc/hosts - fixing a pirate

  You might also consider adding more RAM. 2 places I've seen recommended more to buy reliable RAM are below. I have bought RAM several times to other World Computing and have always been very satisfied with the product and the service. They have instructions online on how to replace the RAM. OWC has also tested the RAM above what Apple says, it is the maximum. Now, I have 6 GB installed on an iMac 2008 so-called beginning limited to 4 GB and noticed an improvement.

  Crucial

  Other World Computing

• iPhone 4S.  Stuck on request to post a link to iTunes.  Has started after installing the recent software update.  Tried to turn but the iTunes link keeps coming.

  iPhone 4S.

  Stuck on request to post a link to iTunes.

  Has started after installing the recent software update.

  Tried to turn but the iTunes link keeps coming.

  You can not connect the phone to iTunes as requested?

• After installing the runtime Visa my mouse moves with COM data

  I'm sorry, I don't know anything about Labview I use prepared GUIs.

  After installing the runtime Visa540 my mouse moves whenever I get the COM1 data. How can I turn that off?

  You use a USB-serial adapter?  Has been sending peripheral data when you start the computer to the top?  The device sending the data while the USB adapter has been being connected?

  It's probably a Windows problem.  If you connect a serial device (adapter USB-serial anytime or a build/PCI serial port at startup) and the device sends data, then Windows think that standard equipment is a mouse.