Unable to print custom size paper

Similar Questions

• 309 a print custom size paper

  My first Photosmart 309 to cannot print custom size paper.  When I try, I get a 'paper mismatch' error when I try to print.  The size that I am trying to print is an invitation of 6 x 9.  I never had this problem with my previous HP printer.

  To ensure your stick settings, close the program that you want to print from. Go to the folder printers, do a right-click and choose print options, click on the features tab and set the custom there. Make sure that you check in at this level and it's printing to the main tray. Then click on apply and then OK in the preference window.

  Now, open the program that you want to print check in and double the print settings. Try to print and see if it works.

• How can I print custom size?

  Dear Experts,

  I use Adobe Acrobat X Pro.

  Could someone tell me please how to print custom size documents? I would need to see the borders so that I can cut the certificate I design.

  Thank you very much.

  PAL

  Ah, I understand. You want extra points to show the edge of the original paper, to show where to cut. This is a very common need for professional printing and there is a 'Brands Trim' option that does when you print. It is not a box (which has the bad habit to be visible when you adjust) but distinctive each outside corner. However, it is available - as far as I know - for PostScript printers.

• Printing on custom size paper

  I just installed a HP OfficeJet Pro 8600 and tried to print a size of 4.5 x 6.5 inches. But this option is not in the list of available paper size, and I have no ability to create a custom size. After searching on Google, I found a thread here who recommended trying another driver. I did and was able to create a custom size. But when you try to print, the printer displays immediately "Cancel printing", and nothing happens (no error message on my computer or on the printer).

  I tried a few other drivers, but they do not work or the word ends up freezing when I try to enter in the printer preferences.

  Does anyone know of a driver that works on an OfficeJet Pro 8600 which also allows the definition of custom paper sizes? Or other good suggestions?

  Hello

  Please try to install the driver of HP Deskjet 6980 replacing and then try to print. Most of the time, this would not solve the issue.

  Kind regards

  Ronnie_N

• Custom size paper will not feed. OfficeJet 7500 has a broadsheet.

  • OfficeJet 7500 a large Format
  • Prod. # C9309A
  • Windows 7 64 bit

  Try printing on paper 3 3/4 "X 6 3/4" (95 x 172 mm). 98% of my attempts, the book is not picked up or jams immediately. All attempts to set the guides and performance white paper, the same results. Appreciated recommendations.

  Hello

  The 7500 has support not all sizes on your operating system:

  Custom-size media is not supported in Windows.
  

  You can find all supported paper size in the paper specifications below:

  http://support.HP.com/us-en/document/c02283601

  You can try the No. 6 3/4 envelope size and check if this can work, it seems to be close enough to the mentioned size

  Good luck

  Shlomi

• Duplex printing legal size paper Officejet Pro 7680

  I need to print the duplex of legal-size Publisher document.  I understand that my printer duplex setting doesn't support legal size paper... y at - there a way to change this, or a product that made HP or another printer that would be recommended?  I have to print several copies once a week if you need something automatic rather than printing on one side and then manually feeding to the next part.  Thank you.

  Thank you for your response and the sharing of this information and/or document, which confirms the legal paper size cannot be used for printing with the auto duplexer.

  I'm sorry, but it will take maybe use the manual duplex option or go to another product tailored to your needs.

• OfficeJet 100: Officejet 100 print legal size paper?

  Hello

  I hope that there could be a solution for this. Several users here have a problem with their printers Officejet 100 legal-size paper printing. Below is part of an email I received about this which explains it better that I could.

  «Apparently some of the reps there have problems printing their contracts of legal size on their mobile printers HP Officejet 100.» It's happened for quite a while. The printer recognizes the document as the legal document, but printing is disabled: it begins printing in the middle of the image.

   

  VRP have found a solution: they must go to the printer properties and choose explicitly legal paper in the drop size. It is already selected by default, but if they select manually it will print correctly. The problem is that: 1) it is a manual workaround, they must do so for EACH print, and 2) they frequently forget and have to reprint. »

  They have already tried to install latest print drivers, but that has not helped. Printers seem to operate normally except for this. What could be the cause of this?

  Thank you.

  Hi @chris_hansen,

  Welcome to the HP Forums!

  I noticed that you can not print on legal paper with your HP Officejet 100 on Windows 7. I'm happy to help you!

  According to your specifications of the printerthis printer supports legal size paper, which is good. First of all, I would like to try running our HP print and Scan Doctor, to ensure that no conflict of driver. If all goes well, try the following:

  • Uninstall the software. Uninstalling the printer software.
  • Clean boot the computer. How to perform a boot in Windows.
  • Disable all Antivirus programs. Disable Antivirus software.
  • Disable all firewall programs. Turn Windows Firewall on or off.
  • Create a new user account. Management of accounts of users and connections (Windows 7).
  • Reinstall using the printer HP install wizard for Windows.

  Let me know what happens!

  I hope hear from you soon!

  "Please click the Thumbs up icon below to thank me for having responded."

• Duplex printing legal size paper Officejet Pro 8620

  I have a HP Office Jet Pro 8620.  It models the paper legal duplex printing?  I get the conflict messages when you try to print.  I can't find any details regarding legal paper in the manual duplex.  Thanks for any help you can give.

  Hi cindylu117,

  Thank you for visiting the Forums from the HP Support! I understand that you are interested in the double-sided printing using legal size paper with your HP Officejet Pro 8620. After taking a quick glance to your specifications , I was able to know that's not possible, it is not supported for duplex printing size:

  

• Editing Images in custom size paper

  Help!   I'm new to PS.  I'm assembling multiple photos in a single document (editing / composite) to print once completed.  How do I re-size of each image to fit into a large custom size document?

  It probably means that you are trying to put a 16-bit image in a 8 bit file. My first reaction is to say don't you worry in this regard. (Your original image file remains low).  If you are not hurt anything. The 'weak' bit depth can still describe over 16 million colors, so I doubt you will see any lower quality.

  If you want you can try to create a low target document. In the new Document dialog box, choose 16 bit (to the right of the color Mode) (the default value is 8 bits)

• Unable to print on letter paper, but allows to print on legal paper

  Original title - printing PROBLEM

  MY PRINTER WILL NOT PRINT ON LETTER PAPER I MISS THE BOTTOM OF THE PAGE IF I PUT IT IN THE LEGAL DOCUMENT WILL PRINT THE ENTIRE PAGE

  [Moved from comments]

  On Friday, April 5, 2013 13:37:08 + 0000, JessieBrooksWL wrote:

  MY PRINTER WILL NOT PRINT ON LETTER PAPER I MISS THE BOTTOM OF THE PAGE IF I PUT IT IN THE LEGAL DOCUMENT WILL PRINT THE ENTIRE PAGE

  Ouch! Please do not yell at us. We can hear you if you type normally,
  in different cases.

  In the print dialog box, you should have a button for preferences.
  There is change of legal to letter.

• HP 7520 - cannot print custom size of the photo tray photo

  I am trying to print a photo of small 2.5 cm wide on a 4 x 6 "piece of photo paper. If I choose the "custom" paper size then I can select 4 x 6 on the right and put 4 copies of the photo on the sheet.  But when I click on print it always goes for the main paper tray and then gives me an error (I emptied the main tray because I don't want it to be used). I don't want to use a large sheet of paper.

  How can I force to take the paper from the photo bin? I tried every setting I can think. The selection of paper size automatically assumes that it is the size of the photo I want! If I choose 4 x 6 as my paper size it only allows me to print one full page. I need a tiny picture, preferably several times on one page. Without doubt, I should be able to say print the picture of this exact size and paper tray! Can anyone help please?

  I use the HP Photosmart 7520 and Windows 7. Thank you.

  SeoulGal,

  Thanks for the quick response. You have me a little confused, so I just want to clarify - initially you were trying to print on 4 X 6 paper, you then changed to 10 x 15, because the paper was not shooting from the photo tray? I assume you mean 10x15cm which is always the same size from 4 x 6 paper.

  Anyway I understand that he won't shoot the photo tray paper, you place the tray in the photo tray when selecting to print? Have a look here at how change printer settings so it pulls the correct status bar: Print the Photos saved on your computer (Windows)

  Please don't forget to take a look at the paper handling section in the printer Specifications as 2.5 photo size you are interested in is not, see here: 7520 Photosmart e-all-in-one printer printer Specifications

  I could open my Windows Live Photo Gallery and play with the settings of the picture, when I select option 4 x 6 as you, I only get the option for "picture full page. Now when I select the letter or 8x10inches I am then given more options 2-4x6s, 1-8 x 10, 9-wallets and Board contact etc.. So that leads me to believe this is a limitation of the software.

  Have you tried using another photo program to see if this allows you to get you exactly what you want? I open HP Photo Creations on my computer and did the following:

  1. click on the option of high prints

  2. navigate to multiple display prints and select display multiple impressions of grid.

  3. click on customize and print

  4. along the top, you are given the option to choose size, please make sure that the value is 4 x 6. See below

  5. now under the advance printing options, go ahead and select the following settings:

  

  6. you are also able to change the number of pictures you want per sheet, I've now fixed it 2. If you want to only 1 copy of the photo under Copies change this to 1

  7. now you can go ahead and select print (remember under the parameter to select the right printer tray)

  You are now able to print the smaller picture on paper photo 4 x 6 size the correct status bar? I look forward to hearing from you, fingers crossed

• HP Photosmart 5524: Unable to print A4 size with ePrint

  I'm trying for months, in order to print with pictures and photos ePrint, and the only result I get is a small peak, like 1/8 of the size of the paper.

  Yes, I tried everything. I resized the picture in Photoshop, reduced to A4 format and exported to JPG format. And it continues to print the same size.

  Can anyone help solve this, because I'm really tired.

  Thank you

  @alexisrufer

  You can stop fighting on this rock.

  Photos / Images / pictures are always printed as 4 X 6 inch (10X15cm).

  Open ePrint help and advice Page > HP ePrint >

  Under use ePrint > see

  EPrint settings / manage print ePrint settings

  ==============================================================

  Although not tested, perhaps you might have more luck if you embed the image in a file 'carrier' - maybe a Word or PDF document.

  Partial excerpt from the ePrint Using section > >

  Which attachment file types are supported?

  HP ePrint service will automatically print attachments for the following file types:

  • Microsoft Word
  • Microsoft PowerPoint
  • Microsoft Excel *.
  • Text (.txt) files
  • PDF
  • HTML
  • Images (bmp, jpg, png, gif, tiff)

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• Custom size paper Deskjet 3510

  I have already paper custom format for printing by making the system to 'think' I was printing to an hp deskjet printer instead of a deskjet 6980 3510. After receiving an update a few weeks ago I'm no longer able to. Is there any solution for this? My OS is Windows 7.

  Hello dewey7654,

  Welcome to the HP Forums.

  I see you have a problem with the printer driver 6980 does not not since an update has been completed.

  I have a link that I would like you to try.  This link says "'way to attribute other printer drivers in different Versions of Windows". "

  Please do not hesitate to write me again if you have any questions or concerns.

  See you soon,.

• Cannot print in the desired custom size

  Hello! It's the first question that I post on this forum (and I seriously hopes that you will be able to help me).

  The thing is I'm trying to scan documents (with custom size and the lines in the journal) and use them as a model, then write about them using its custom lines, then remove the template, so when I print, the words and the content of my paper will print perfectly in this personalized book.

  Would this be possible? I've tried scanning it, looking for its size and using a document to the custom size paper with the same characteristics, however it does print never it perfectly.

  I'm really sorry if I expressed myself correctly, but I can't find another way. Thank you!

  Dr.GroovyFunk

  It should work, but you must ensure that the scale and position is perfect as well horizontally than vertically of sizing for well-known marks on the page.

  The vagaries of printers also means that the book is never perfectly in place as it passes through so there will always be some differences.

  Peter

• 8610 HP printer: print on legal size paper

  I need to print legal size paper, but I don't know how to get the paper in the paper tray or otherwise feed the paper into the printer. Any help is appreciated.

  Hi jkh911, this guide on how to print with this printer model shows how to adjust and load the main tray. LINK

  I hope that answers your question - please let me know.