Unable to record a voice-over...

I am trying to record a voiceover and seem to have a harder than expected time... I have done in the past on the same machine but seem unable to repeat.

In any case, here's how it goes: PP 5.5 on an iMac 2011. My external lapel MIC is dead, so I want to use the internal mic. The internal microphone seems to work fine (preferences Finder shows the levels of sound recording go to the region of max).

When I try to select audio in PP (Preferences > > Audio hardware), I'm stuck with 'System default input/output', even when I choose ' mic/built-in output integrated. " I choose ' input/built-in exit integrated', but this isn't what I was looking for (I think).

Anyway, back to the Audio Mixer, I select my audio track for the record and that you have a choice of material: "built-in input: line 1/built-in output: line 2.

Of course (?) when I try to record anything with these settings, the recorded track is empty.

What gives?

Eureka!

I finally got (using the built-in mic, which is obviously not the best solution).

For those interested, here's how it goes.

First, he must pause during playback this link: the mentioned "Utilities" is not a menu that is hidden somewhere in the PP, this is the utilities subfolder of the Applications folder on your Mac, in which it is, in fact, an application setting up Audio and Midi. Here's what it looks like on my iMac (OS Lion) after that I chose the built-in microphone:

I do not change the default settings.

The fact is that once back in PP and after selecting the microphone integrated into the preferences > hardware Audio drop-down list, select this in the mix Audio in PP Panel worked very well.

Note that I discovered this by accident, looking ahead to what I have to do once I bought a micro USB...

Tags: Premiere

Similar Questions

  • How can I record a voice-over?

    I can not find how do.

    This might help

    Audio recording

  • Help with voice-over in CS6

    Hey all,.

    Is it possible (via settings, plugins or any other method) which would not have me keep remove my helmet during the recording of voice over?  I think there should be a way, as all the other basic videos editing software out there puts mute your headset when you save a voice above.  I do it for the type of videos (show comic compilation) I do about 100 small voiceover, as I edit my videos and I have to do both at the same time (which means, I can just make the changes, then go back and redo one voice).  If it completely slows the flow of work to have to keep my helmet on and outside.

    Is this in any way about this?  Any help would be GREATLY appreciated from e.

    Thank you

    Eric

    Adobe Premiere Pro * audio recording

  • Voice over recording change vs multitrack view

    Hi guys, need some advice here.

    I always taped voice-over in editing with Audition 3.0 (Windows 7 64-bit)

    Recently, I bought a Creative sound card (X - Fi Titanium HD) that sounds good and that records 24 / 96 kHz with excellent results using several different microphones, mainly an EV RE20.

    I have the main of my mixer left and right coming out using cables of 1/4 inch outputs and enter the audio card to the left and right inputs via RCA...

    In the audio hardware setup Auditions change the display, there is only a choice either to the left or right to the but not a mixture of the two as a starter. (aid to the left)

    Do not use the input on the card because I wanted to use the ins RCA (left/right) on the sound card and microphone input is a 1/8 input that would require another Y microphone cable 1/4 to 1/8 and the fact that I had issues with 1/8 entries before.

    Then, when I record the voiceover in the edit mode, I think I'm really only half of the signal (to the left) which means that I need to gain preamp more that I would get a good level.

    Recently, I have been recording in multitrack view using the 1-way left and right track 2 at the and then doing a mono mix that translates into a very pleasant without level to increase the gain a lot.

    So I guess my questions would be I'm actually saving half the signal change their view by simply using the left

    and if that's true, I just have to continue recording in multitrack view using the configuration I described above.

    Any advice would be greatly appreciated.

    It's just a signal level - you actually lose anything. You can't actually say it is 'half' a signal - it is just a signal at a different level. And you can always get the audition level without loss by record or convert your signal in 32 bits (native format of the hearing) to floating point and it normalize to the level of what you want. When you have only a mono microphone - a track is all you need, there is absolutely no benefit to the recording of two tracks. As to how you save (MV or EV), well it is entirely up to you – that really suits you. The only notable difference is that EV record in a temporary file to be saved in a permanent file later and MV went directly to a file.

    Do you use a microphone preamp with your microphone if you use the entries in the? If you're not, you don't get something like the good structure with the card, such as a microphone does not what whether as enough signal to drive an entry to the correctly. It is a hardware problem, and not one that you can correct for with software, because it will significantly change the signal to noise ratio.

  • Satellite A200-27R integrated microphone for voice over IP

    The description of the product (see excerpt below) for a Satellite A200-27R indicates that the A200-27R has a microphone for voice over IP. I couldn't access it (for example with Skype, Live Messenger, control panel) there's no sign of her external on the computer. Control Panel > Sound > tab says Recording Microphone Realtek High Definition Audio not connected.

    How to configure and use the microphone for voice over IP?

    Features of the Enhanced Numtxpackets® Speedstepa® technology
    SM BIOS compatible
    HD Audio compatibility
    Microsoft® Windows® Hotstarta? ¢ for the entertainment of instant fusion
    Multimedia bar with 6 easy keys (Internet browser, CD/DVD launcher, Play/Pause, Stop, Rewind, forward)
    microphone for voice over IP

    Hello

    The built-in microphone depends on the webcam.
    As far as I know, the Satellite A200-27R PSAE3E was not equipped with an internal webcam and so the internal microphone is not available.

    Try to use an external headset or just simple microphone.

    Concerning

  • Record my voice on my MAC

    How can I record my voice on my MAC to create a MP #, my SW version is OSX 10.9.5?

    Plug in a microphone and use a software like Garageband.

    If you want stereo you need a stereo USB adopter

  • Why my iphone 4s are on the voice-over in itself?

    The first time it happened to my iphone 4s, I made an APPT at the Genius Bar because my screen would fade to black as soon as he came. They fixed, said that had been "Voice Over" in the settings. I had recently been in settings but didn't even know what "Voice Over" was so I knew that I don't. Then, about a month later it happened again. I was looking at my phone, everything to Unsnap, when the screen just disappeared to the black and would not come again no matter how many times I reset, tried the reset of itunes, etc.  Later, after making another appointment at the Apple Store, like last time, I could still hear Siri whisper very softly... hmmmmm. I asked Siri to turn my phone on, and she said that she could not. Then I asked for the "Voice Over" disable and she did it and voila, I had a photo again.

    How can I do what happens to stop? Sort to always turn off 'Voice Over'?

    Thanks for any help anyone can offer :)

    chgo2ark

    Go to settings > general > accessibility > accessibility shortcut and make sure VoiceOver is not checked.

  • Satellite L755 - 1 DR - any change that hacker can record my voice

    I have Toshiba L755 portable 1DR.

    I removed the camera/microphone (inside view) module and I connect until alignment (no additional microfone) external wireless headset.
    I also disconnect intervene inside.

    Now all is change that hacker can record my voice more. (are there any other 'hidden' inside the laptop recording devices?)

    Request, because I think my phone is hacked (norton security installed).

    > Ask because I think my phone is hacked (norton security installed).

    You think you have some sort of malware on the system?
    Then why you n t run the recovery and set the camera back to the factory settings.
    The HARD drive will be formatted and all data would be deleted including malware.

  • Audio level of the Voice-over element does not match level of audiometers

    I speak in my external USB microphone and create an audio clip of the voice-over. The audio level of the clip is too low - the voice is too quiet, so I climb the audio level in the clip.

    But it still sounds too low, especially on the meters, which are reading down below-12. So I try to push the audio level of the clip all the way to the top. Now, in the clip, the tops of the audio track are red and are cut.

    But out there on the meters, it's another story. Counters show no break at all; in fact, they show the audio level between-6 and 0, which is where I want it to be. And the voice and the words sound very well in my helmet - I can't detect any cutting or other abnormalities.

    So what should I do, leave audio level of the clip pushed all the way upward, with the red list of the peaks and cut and go through the meters, which show that it is very good?

    Who should I believe, warning of the audio sound is distorted or indication the meters that everything is good with the fact that it sounds good?

    Tom B.

    Occasionally, I had this problem.

    The actual meters seem to stop at 0db and never go higher despite the audio tracks, display of the peaks above 0 dB.

    Try to play the clip/s in question backward.

    I remember that DV is an offender of this audio oddity.

    Can you tell us what are the specifications of the clips?

    As much as I know this problem is not resolved.

    Al

  • How to add music to read during a voice over?

    I'm doing a project with photo slides and a voice over, but it is necessary to have a background music playing during the voiceover

    Hello

    ·         What operating system do you use?

    ·         What application you use to carry out a project with slides and a voice over?

    You can use Windows Media center or Windows movie maker to create a slide show with music. You can refer to this article:

    http://Windows.Microsoft.com/en-us/Windows7/creating-slide-shows-with-music-in-Windows-Media-Center

    For Windows Vista:

    http://Windows.Microsoft.com/en-us/Windows-Vista/demo-create-a-slide-show-with-music-in-Windows-Movie-Maker

  • Have a Dell Windows XP computer. I am unable to record anything on a CD - R,

    Have a Dell Windows XP computer.  I am unable to record anything on a CD - R, Get a pop-up that says folder D:\ ' is not accessible. The floder may be in a situation unavialiable, protected by a password, or the file contains a / or \. Never tried to save anything on a CD before r, however, I made copies of the disc.

    Hello RonWin2,

    I would like to first confirm that you have a CD rom that is able to write data to a compact disc.  If you have confirmed that you do, I suggest go to Dell to confirm the drivers are updated.  In addition, you are able to listen to a cd of music on your computer?   Please let us know status.

    Dell support community:

    http://en.community.Dell.com/search/searchresults.aspx?q=CD+ROM

    How to copy information to a CD in Windows XP:

    http://support.Microsoft.com/kb/306524

  • I record my voice bt no sound appears

    I record my voice bt no noise is my microphone is workinng correctly


    Separate from this thread.

    To be clear, you are able to use the microphone in other programs?

    (I assume you are using Audacity as the user in the thread you posted this, otherwise let us know)
    This affects only Audacity?

    When you register, the Visual representation shows only a solid line at the Center or does it show vertical lines / peaks?

    Make sure that the correct recording device is selected in the program and that the volume levels are correct in the program itself, both within Windows.
    http://Audacity.sourceforge.NET/onlinehelp-1.2/prefs.htm
    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/soundscpl_set_recording_volume.mspx?mfr=true

  • How can I record my voice on an instrumental piece and then burn it to a cd?

    I want to create my own tape of relaxation, so it's my favorite instrumental music with my own affirmations voice / recorded. I want to be able to do this via the computer, so I can then burn the entire track on a cd that I can listen to through my walkman. Anyone have an idea how I can do this easily and cheaply? preferably without downloading any programs.

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas:

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem
    I want to create my own tape of relaxation, so it's my favorite instrumental music with my own affirmations voice / recorded. I want to be able to do this via the computer, so I can then burn the entire track on a cd that I can listen to through my walkman. Anyone have an idea how I can do this easily and cheaply? preferably without downloading any programs.

    ============================================
    You can record you voice with tape recorder but no more
    software I don't know how you could combine your narration with the
    music.

    Windows Vista - sound recording
    http://Windows.Microsoft.com/en-us/Windows-Vista/record-sound

    The free Audacity software might be useful to try:

    Features of Audacity:
    http://Audacity.sourceforge.NET/about/features

    Audacity tutorial - mixing a Narration with background music
    http://manual.audacityteam.org/index.php?title=Tutorial_-_Mixing_a_Narration_With_Background_Music

    Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • Audio recording in voice command (no transcript of speech recognition)

    Does anyone know a program/application record that allows a person control the audio audio functions during an audio recording with voice commands? I would like to dictate (no transcript required) to a .wav file or .dss with an earpiece bluetooth and power say 'start', 'stop', 'rewind', etc. when recording while I'm totally hands-free during the autospies I do.

    Hello

    I would say that you can use your favorite search engine to download and install a voice controlled application audio recording, you need to use.

    NOTE: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    Hope this information is useful.

  • You can synchronize audio voice over existing?

    I have a piece of animation that has a voice over track.

    I could synchronize the audio to the host character?

    1. create a scene at least a puppet

    2. import your audio files in this scene

    3 select a track of puppets

    4 object > calculate Lip Sync of Audio scene

Maybe you are looking for