Voice over recording change vs multitrack view

Hi guys, need some advice here.

I always taped voice-over in editing with Audition 3.0 (Windows 7 64-bit)

Recently, I bought a Creative sound card (X - Fi Titanium HD) that sounds good and that records 24 / 96 kHz with excellent results using several different microphones, mainly an EV RE20.

I have the main of my mixer left and right coming out using cables of 1/4 inch outputs and enter the audio card to the left and right inputs via RCA...

In the audio hardware setup Auditions change the display, there is only a choice either to the left or right to the but not a mixture of the two as a starter. (aid to the left)

Do not use the input on the card because I wanted to use the ins RCA (left/right) on the sound card and microphone input is a 1/8 input that would require another Y microphone cable 1/4 to 1/8 and the fact that I had issues with 1/8 entries before.

Then, when I record the voiceover in the edit mode, I think I'm really only half of the signal (to the left) which means that I need to gain preamp more that I would get a good level.

Recently, I have been recording in multitrack view using the 1-way left and right track 2 at the and then doing a mono mix that translates into a very pleasant without level to increase the gain a lot.

So I guess my questions would be I'm actually saving half the signal change their view by simply using the left

and if that's true, I just have to continue recording in multitrack view using the configuration I described above.

Any advice would be greatly appreciated.

It's just a signal level - you actually lose anything. You can't actually say it is 'half' a signal - it is just a signal at a different level. And you can always get the audition level without loss by record or convert your signal in 32 bits (native format of the hearing) to floating point and it normalize to the level of what you want. When you have only a mono microphone - a track is all you need, there is absolutely no benefit to the recording of two tracks. As to how you save (MV or EV), well it is entirely up to you – that really suits you. The only notable difference is that EV record in a temporary file to be saved in a permanent file later and MV went directly to a file.

Do you use a microphone preamp with your microphone if you use the entries in the? If you're not, you don't get something like the good structure with the card, such as a microphone does not what whether as enough signal to drive an entry to the correctly. It is a hardware problem, and not one that you can correct for with software, because it will significantly change the signal to noise ratio.

Tags: Audition

Similar Questions

  • Voice over recording

    Hi, how can you get the 'R' (record) option in my mixer of audio track to appear, I don't see that "M" and "S".

    That's right, you have to do a standard track in order to make the voice above.

  • 2015 CC took over at the beginning of the timeline, when voice-over recording

    Im trying to record some simple voiceover for a project. Whenever I click on the microphone icon in the track to start the recording, he jumps at the beginning of the timeline to record.  It doesn't matter what position in the timeline panel, I always leave her start recording from the beginning. I need to be able to specify where to start voiceover recording.  This does not appear to be linked to this particular project that others work great too.  Is there a setting somewhere that I'm missing?

    I thought about it.  I had to delete the entry and exit of the markers.

  • Help with voice-over in CS6

    Hey all,.

    Is it possible (via settings, plugins or any other method) which would not have me keep remove my helmet during the recording of voice over?  I think there should be a way, as all the other basic videos editing software out there puts mute your headset when you save a voice above.  I do it for the type of videos (show comic compilation) I do about 100 small voiceover, as I edit my videos and I have to do both at the same time (which means, I can just make the changes, then go back and redo one voice).  If it completely slows the flow of work to have to keep my helmet on and outside.

    Is this in any way about this?  Any help would be GREATLY appreciated from e.

    Thank you

    Eric

    Adobe Premiere Pro * audio recording

  • Satellite A200-27R integrated microphone for voice over IP

    The description of the product (see excerpt below) for a Satellite A200-27R indicates that the A200-27R has a microphone for voice over IP. I couldn't access it (for example with Skype, Live Messenger, control panel) there's no sign of her external on the computer. Control Panel > Sound > tab says Recording Microphone Realtek High Definition Audio not connected.

    How to configure and use the microphone for voice over IP?

    Features of the Enhanced Numtxpackets® Speedstepa® technology
    SM BIOS compatible
    HD Audio compatibility
    Microsoft® Windows® Hotstarta? ¢ for the entertainment of instant fusion
    Multimedia bar with 6 easy keys (Internet browser, CD/DVD launcher, Play/Pause, Stop, Rewind, forward)
    microphone for voice over IP

    Hello

    The built-in microphone depends on the webcam.
    As far as I know, the Satellite A200-27R PSAE3E was not equipped with an internal webcam and so the internal microphone is not available.

    Try to use an external headset or just simple microphone.

    Concerning

  • How to move from head of reading a file in a file in multitrack view?

    Hello

    I have the latest version of Audition CC 2015 for OS X (I'm on El Capitan) and I am trying to find a way to jump the playhead of a file into a file in multitrack view. Basically, I created a multitrack session of several files that are now on the same path, and I want to be able to move the playhead at the beginning of each clip, so I can add markers for some of them. I thought that perhaps the shortcut command + arrow right would be the ticket, because he says, it can move the playhead to 'the next selection edge', but it does not work. If I have a marker, command right indeedl take me to the next marker, but otherwise need me right at the end of the multitrack session, which is exactly what I need. Y at - it a keyboard shortcut that will do what I need here? Currently, I'm moving the read head to nearby where the edge between two elements is, and then now shift and dragging the playhead on the edge so it aligns to the edge, but it's a lot more effort that a shortcut simple keyboard would be, if there is such a shortcut.

    On a PC, Alt + right arrow for that. To be sure, on a Mac, hover over the 'Move playhead to another' button on the transport and see what he says...

  • Why my iphone 4s are on the voice-over in itself?

    The first time it happened to my iphone 4s, I made an APPT at the Genius Bar because my screen would fade to black as soon as he came. They fixed, said that had been "Voice Over" in the settings. I had recently been in settings but didn't even know what "Voice Over" was so I knew that I don't. Then, about a month later it happened again. I was looking at my phone, everything to Unsnap, when the screen just disappeared to the black and would not come again no matter how many times I reset, tried the reset of itunes, etc.  Later, after making another appointment at the Apple Store, like last time, I could still hear Siri whisper very softly... hmmmmm. I asked Siri to turn my phone on, and she said that she could not. Then I asked for the "Voice Over" disable and she did it and voila, I had a photo again.

    How can I do what happens to stop? Sort to always turn off 'Voice Over'?

    Thanks for any help anyone can offer :)

    chgo2ark

    Go to settings > general > accessibility > accessibility shortcut and make sure VoiceOver is not checked.

  • Is it possible to change the playlist view back to display columns on iTunes?

    Is it possible to change the playlist view back to display the columns?

    View > view as > songs.

    TT2

  • Audio level of the Voice-over element does not match level of audiometers

    I speak in my external USB microphone and create an audio clip of the voice-over. The audio level of the clip is too low - the voice is too quiet, so I climb the audio level in the clip.

    But it still sounds too low, especially on the meters, which are reading down below-12. So I try to push the audio level of the clip all the way to the top. Now, in the clip, the tops of the audio track are red and are cut.

    But out there on the meters, it's another story. Counters show no break at all; in fact, they show the audio level between-6 and 0, which is where I want it to be. And the voice and the words sound very well in my helmet - I can't detect any cutting or other abnormalities.

    So what should I do, leave audio level of the clip pushed all the way upward, with the red list of the peaks and cut and go through the meters, which show that it is very good?

    Who should I believe, warning of the audio sound is distorted or indication the meters that everything is good with the fact that it sounds good?

    Tom B.

    Occasionally, I had this problem.

    The actual meters seem to stop at 0db and never go higher despite the audio tracks, display of the peaks above 0 dB.

    Try to play the clip/s in question backward.

    I remember that DV is an offender of this audio oddity.

    Can you tell us what are the specifications of the clips?

    As much as I know this problem is not resolved.

    Al

  • How to add music to read during a voice over?

    I'm doing a project with photo slides and a voice over, but it is necessary to have a background music playing during the voiceover

    Hello

    ·         What operating system do you use?

    ·         What application you use to carry out a project with slides and a voice over?

    You can use Windows Media center or Windows movie maker to create a slide show with music. You can refer to this article:

    http://Windows.Microsoft.com/en-us/Windows7/creating-slide-shows-with-music-in-Windows-Media-Center

    For Windows Vista:

    http://Windows.Microsoft.com/en-us/Windows-Vista/demo-create-a-slide-show-with-music-in-Windows-Movie-Maker

  • Changes to the view of a console file

    In Disk Defragmenter, the 'File - Options' menu item opens a window with a tab "Disk Cleanup". On this tab, it says: "the changes to the view of a console file are saved in your profile." What is a file "system"? What 'past to view' this qualifies? Finally, what is "my profile"?

    If all this has nothing to do with my hard disk defragmentation?

    Hello

    I guess that this option is available for all tabs in the management of the computer. It seems that if you change the configuration of console - which will be saved in your profile. It has nothing to do with the particular disk defragmentation or disk cleanup...

  • computer - cannot change to Classic view problems

    original title: computer problems

    Hi my computer is going crazy all of a sudden that my Start menu seems to have changed to Classic view by its self. Then when I tried to change back to normal look, he's not here. I keep all of my updates to day and stay away from websites that are harmful. I have vista and IE8. Also my norton virus alerts have been telling me that a recent attack has been blocked, explore more than normal even if the internet is off. Have I been hacked or infected by a virus I don't know please help to about.

    Hi my computer is going crazy all of a sudden that my Start menu seems to have changed to Classic view by its self. Then when I tried to change back to normal look, he's not here. I keep all of my updates to day and stay away from websites that are harmful. I have vista and IE8. Also my norton virus alerts have been telling me that a recent attack has been blocked, explore more than normal even if the internet is off. Have I been hacked or infected by a virus I don't know please help to about.

    RE: Start menu seems to have changed to Classic view

    Right click on the Start button > properties > click Start tab Menu > click on the dot to Start Menu > you should see a blue dot on the front now. Yes?
    Click OK when finished.

    RE: possible virus attack.

    I think that your Norton had done his job.
    But, if you want additional coverage, suggest you download and install malwarebytes.

    http://en.kioskea.NET/Download/Download-105-Malwarebytes-anti-malware

    Once installed, open malwarebytes > it will prompt you to update. Click Yes and let it update. If it's not hum update you, click Update and make an update > click Scan > click perform complete scan > it will take a while > it will give you a report summary at the end.

  • Voice call recording still not possible?

    Hi all...

    I've read many threads on voice call recording. I also read where Mr.Mark Sohm and Mr.Simon Hain says it is not possible... I want to ask you:

    It is still not possible even after JDE 5.0?

    Thanks in advance...

    There are services that transmits a phone call via another service, that records the call.

    It is not possible to do it locally on a BlackBerry Smartphone.

  • You can synchronize audio voice over existing?

    I have a piece of animation that has a voice over track.

    I could synchronize the audio to the host character?

    1. create a scene at least a puppet

    2. import your audio files in this scene

    3 select a track of puppets

    4 object > calculate Lip Sync of Audio scene

  • How to use JavaScript to change the named view

    How to use JavaScript to change the named view

    Do you mean to jump to a specific Destination named within a PDF file? SE so there

    the method gotoNamedDest of the Document object.

Maybe you are looking for