Unable to restart or shut down Windows when a USB modem is connected to the computer

Similar Questions

• When I try to run the Office remotely in Windows XP, it is not to connect to the computer. I tried all of the usernames and passwords.

  Hi I have a dell windows xp system and when I tried to activate remote desktop evil explains it all for you first I went to run then I typed in regedit then regidit came so I went to the file then I clicked connection network regestry I tyed in the box that says enter name of object to select I typed the computer name , then he said enter thers password network where I have my problem ive typed in my fourth name and password connection typed in everything what I was thinki someone can please help me

  original title: problem with regedit

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link:

  http://social.technet.Microsoft.com/forums/en/category/windowsxpitpro

  You can check the link: http://technet.microsoft.com/en-us/library/cc780927 (WS.10) .aspx

• Remote Desktop connection: Windows 7 Home Premium 64-bit connects to the computer of Windows XP VPN

  Hi all

  I am trying to establish remote desktop TO my new laptop (Windows 7 Home Premium 64-bit) on my computer (Windows XP) work via a VPN. The VPN Client connects to my network to work with no problems, but when I try to use the remote desktop connection I get an error message:

  Remote Desktop cannot connect to the remote computer to one of the following reasons:

  (1) remote access to the server is not enabled

  (2) the remote computer is disabled

  (3) the remote computer is not available on the network

  Make sure that the remote computer is on and connected to the network, and remote access is enabled.

  Items 1-3 are working well, so I guess that the problem is caused by another issue?
  I'd appreciate any help.
  Thank you
  Lou

  Thanks for your response Al. To answer your qus:

  (1) cisco VPN Client for 64 - bit.

  (2) I don't know how to ping through the VPN tunnel - I don't see this option, anywhere in the Cisco customer (I'm not a professional, just a user)

  (3) Yes. Also, I can connect to the host PC via my old laptop XP (xp) of fine House, just not my new laptop (Windows 7 Home Premium) so the problem must be with my new laptop rather than at the end of the host PC.

  After that you connect through the VPN tunnel open a command window, IE. go in Start > run , then type cmdand type ping DRC-hostname or IP-address-DRC ping.

  Examples:

  Ping lou - pc

  ping 192.168.1.25

  FWIW, I have a desktop computer home wireless Windows 7 Home Premium SP1 64 bit on my LAN that connects fine to a XP Pro SP3 32-bit Wired test machine using [DRC] remote desktop. Now XP Pro SP3 DRC test machine is configured for a static IP address and I have manually configured the network mask, gateway, DNS resolves and made sure that NetBIOS over TCP/IP is enabled in the properties of the NETWORK Ethernet card on the test computer.

  Just for fun, I checked the hashes of file for the file mstsc.exe on the Win 7 Home Premium 64-bit machine and a machine Win 7 Home Premium 32 bit I have and hashes were a bit different as the size of the files. The versions of the files are the same though. I assume that the difference is because we're 64-bit to 32...

• the digital camera driver does not load when a sony camera is connected to the computer vista laptop.

  At the same time the downloaded movies netflix has more audio.  Device Manager does not display a driver of the camera when the camera is attached via firewire and running?  I tried to reload the drivers and worked with the pilot web-based updates.

  Hi mstradt,

  1. which version of the operating system are you using 32-bit or 64-bit?

  2. What is the model of the camera number?

  3. you try to use the camera of Sony for the first time?

  4. How do you try to connect the camera?

  You can first try connect the camera with the different port and check if it is detected.

  Also try to use only Sony 4 firewire cable 4-pin to connect the camera.

  You can also visit the following links and see if it helps:

  Can what types of connections and digital video cameras be used to import video?

  http://Windows.Microsoft.com/en-us/Windows-Vista/which-types-of-digital-video-cameras-and-connections-can-I-use-to-import-video

  Troubleshoot camera connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-camera-connection-problems

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows 8 on Bootcamp. Kernel_security_check_failure regular on restarts and Shut Downs.

  MacBook Pro 13 retina

  8 GB RAM

  Bootcamp 5.0.5033

  Windows Fresh 8 upgrade from fresh Windows 7

  Hello

  I've been using Boot Camp for several months, running Windows 7 on my Mac. I need extend partition, so I decided to uninstall the Windows 7 partition (using Boot Camp on a Mac), then reinstall Windows 7 on a freshly prepared partition. Who had finished I immediately upgraded to Windows 8.

  I installed the Boot Camp of support software, and as far as I can tell all my drivers are up to date.

  However, every time I restart or shut down the computer, I get a BSOD with Kernel_security_check_failure. I tried to study it using WinDbg, but all this can point to what is NTKRNLMP.exe which shows that it is caused by something else, and it is not clear what.

  I tried to go through this process twice, so I'm on my second fresh install in Windows 8 now.

  There is no other problems at all on Mac or Windows, it is not never failed except when it restarts.

  I ran a memtest with no problems found.

  I have about this problem over the past months, I have been using Windows 7

  The only time I saw it crash not was when it was connected to an external monitor which leads me to believe it's a problem with the display driver. I tried all the drivers from the Boot Camp, Windows update software and update the Intel utility display and none of them solve the problem.

  Any help or this point troubleshooting tips would be MUCH appreciated and I would be interested to hear if someone has the same problems.

  Thank you!

  Chris

  Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?

  The following link has information about the use of Windows Live SkyDrive:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  If you have problems to compress the minidump files copy the minidump files to another location such as a folder on the desktop

  In addition, you do not necessarily have compress the minidump files, you can download one at a time.

• When I shut down windows end progra - sample appears and windows will not be stopped, unless I click for end of program. Eny one have an idea how to stop this program from running?

  When I shut down windows end progra - sample appears and windows will not be stopped, unless I click for end of program. Eny one have an idea how to stop this program from running?

  Then, you will need to request Support Intel if the drivers you downloaded were appropriate for your hardware and Windows XP.

• When I shut down windows I get a pop-up message from Web page

  When I shut down windows I get a pop up message saying-Web page

  "Doesn't not loading skin name 'Talk Talk' the"shell.css"file is necessary in your" sscommon, skins, talktalk, css / ' directory. ". To resolve this problem, please check the name of skin in your config file, or re install the application. »

  What it means?

  Well, I go back to them and tell them you can send and receive mail, but then with them, indicate the exact error message and ask him what is the file that is supposed to be missing.  Its clearly a talk talk question, since talk talk generates the error message.

  Steve

• My guard computer shut down unexpectedly when I play games.

  My guard computer shut down unexpectedly when I play games. Now it is not always the case, just sometimes. The other day I was playing Sims 3 all day, literally, with the graphics settings maxed out and had no problem. The next day, he would crash as soon as it finished loading, even with the graphics settings at the bottom. Today, it was working fine this morning and now it crashes again. I had the same problem on and off with other games as well, Halo 2, Kings Bounty, UT 3. Here is my system:

  OS - Vista Ultimate 32 bit
  Processor: Core 2 Quad Q9400 @ 2 .66GHz
  RAM - 4 x 1 GB PC6400 DDR2/800
  MB - MSI P7N SLI - FI
  HARD drive - 150 GB x 2 (Raid 0) Raptor 10 k RPM
  PSU - 1000 watts
  GPU - NVidia GeForce 9800GT 1 GB (x 2 in SLI)

  And the error I get from Event Viewer:

  Filter event with the query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace '//./root/CIMV2' because of error 0 x 80041003.» Events cannot be delivered through this filter until the problem is resolved.

  I got the error almost everyday since I got the computer, about 10 months ago, but it only blocks the computer if I play a game. I tried the 'fix' that removes the WMI event viewer 10 error, but everything done was make sure the error is not logged. I also tried another fix I found me delete the files in the repository, but that no longer works. I also run scans of complete system of virus/malware Spybot Search & Destroy and AVG 8 and verified the updated driver for my hardware. I also ran diagnostic tool memory. Who has good/clean/current. Can it be fixed or what I have to reinstall the OS?

  Hi JerHekSr,

  Thank you for using answers Forum.

  The first thing that comes to mind would be to check the motherboard manufacturer for an update of the firmware/BIOS.

  The error message mentions "loadpercentage > 99' which looks like you are running may at maximum load of the CPU while the game and that is the cause of the crash. You could try a clean boot to prevent the using CPU resources while you play to see if it makes a difference of strtup programs.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. This article describes how to solve problems in Windows Vista by performing a clean boot. This article also describes how to start the Windows Installer service and how to reset the computer so that it starts as usual.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.

  a. log in the computer using an account with administrator rights.

  b. click Start collapse this image enlarge this image, type msconfig.exe in the Start Search box and press ENTER to start the System Configuration utility.

  The collapse of this image to this image if you are prompted for an administrator password or for confirmation, type your password or click continue .

  c. under the general tab, click Selective startup , and then clear the Load Startup items check box. (The box use the Boot file is not available.)

  d. on the Services tab, select the hide all Microsoft services check box and then click on disable all .

  Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.

  e. click OK , and then click restart .

  Step 2: Enable half the services

  a. follow steps 1a and 1B to start the System Configuration utility.

  b. click on the Services tab and then click to select the hide all Microsoft services check box.

  c. Click to select half of the check boxes in the Service list.

  d. click OK and then click restart .

  Step 3: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 2. In step 2, click to clear half of the check boxes that you have initially enabled in the Service list.

  If the problem does not occur, repeat steps 1 and 2. In step 2, select only half of the remaining check boxes that are cleared in the Service list. Repeat these steps until you have selected all the check boxes.

  If only one service is selected in the list of services , and you the problem persists, the service selected the cause of the problem. Go to step 6. If no service is causing this problem, go to step 4.

  Step 4: Enable half of the startup items

  a. perform a clean boot by repeating step 1.

  b. click on the Startup tab and then click to select half of the check boxes in the startup item list.

  c. click OK , and then click restart .

  Step 5: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 4. In step 4, click to clear half of the check boxes that you have originally selected in the startup item list.

  If the problem does not occur, repeat steps 1 and 4. In step 4, select only half of the remaining check boxes that are cleared in the startup item list. Repeat these steps until you have selected all the check boxes.

  If only one startup item is selected in the startup item list, and you still experience the problem, start selected in the list element is the service that is causing the problem. Go to step 6.

  If no startup item causes this problem, a Microsoft service most likely the cause of the problem. To determine which Microsoft service may be causing the problem, repeat step 1 and step 2 without selecting the hide all Microsoft services check box in each step.

  Step 6: Resolve the problem

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  Step 7: Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click on start to reduce this image enlarge this image, type msconfig.exe in the Start Search box and press ENTER.

  The collapse of this image to this image if you are prompted for an administrator password or for confirmation, type your password or click continue .

  On the general tab, click the Normal startup option, and then click OK .

  When you are prompted to restart the computer, click restart .

  I hope this helps. Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Whenever I have shut down my computer, I am disconnected from Windows Live Messanger and must manually connect at the beginning of my next session.

  Question asked by Neil Clark (me)
   
  I selected the option Connect automatically in Windows Live Messenger when I turn my computer. Whenever I have shut down my computer, I am disconnected from Windows Live Messanger and must manually connect at the beginning of my next session.

   

  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
   
  Sunday, August 22, 2010 01:54

   

  Windows Live K - Ann C response.

   

  Hi Neil,

  This error occurs usually when a record has been changed when an update has been performed on your computer. To resolve this issue, follow these steps:

  
  Important: before you edit the registry, make sure to save, to understand how to restore the registry if a problem occurs.

  Warning: If you use the correct registry editor, you may cause serious problems may require you to reinstall your operating system. Microsoft does not guarantee that you can solve problems that result from the use of the Publisher of the registry incorrectly. Use the registry edit at your own risk.

  
  BACKUP REGISTRY KEYS:

  1. click on Start, click on run

  2. type regedit and click Ok

  3. in the registry editor window, click desktop on the left side to make sure that you backup all the registry keys.

  4. click on file and click on export

  5. save the file on your desktop or in your desired location. It will have the default extension (* .reg) to back up the registry.

  6. If you want to restore a file to the registry, in the Registry Editor window, click file and click Import

  7. navigate to the location and find the name of the file with the .reg extension and click Open.

  Note: you will be prompted that importation has been properly registered in the register.

  
  TROUBLESHOOTING STEPS:

  1. open the registry editor by clicking on Start, then run. Type regedit and then click OK.

  2 open the user Shell Folders folder. To do this, click on the + sign of each of the products listed below.

  a. click on the [] sign + next to HKEY_CURRENT_USER

  b. scroll and click on the [] sign + next to Software

  c. scroll down and click on the [+] sign next to Microsoft

  d. scroll down and click on the [+] sign next to Windows

  e. scroll down and click on the [+] sign next to CurrentVersion

  f. scroll and click on the [] sign + next to the Explorer

  3. click on the User Shell Folders. A list of entries appears on the right side. Double-click AppData.

  4. the value data, type the following entry, and then click OK: %USERPROFILE%\Application Data

  5. close the Windows Registry Editor and restart your computer.

  Thank you

  K Ann C.

   

  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------

   
  Thursday, August 26, 2010 09:27

   

  Response from Neil Clark

   

  Hi K - Ann,

  Thank you for the above information.

  I followed you instruction to back up the registry keys, but when I followed step number 7. Navigate to the location and look for the name of the file with the .reg extension and click Open, the message of answers that I received from the registry editor has been as follows: -.

  Impossible to import C:\Documents and Settings\Compaq_Owner\My Documents\My Backup\Backup260910.reg of register: not all data was successfully written to the registry.  Some keys are open by the system or my other processes.
  
  So I closed my computer and restarted. I then followed your instructions again (this time save the backup of the registry to a member in the same library, called "Backup260910bkup"

  Yet once, when I followed the number of the step 7. Navigate to the location and look for the name of the file with the .reg extension and click Open, the message of answers that I received from the registry editor has been as follows: -.

  Impossible to import C:\Documents and Settings\Compaq_Owner\My Documents\My Backup\Backup260910bkup.reg of register: not all data was successfully written to the registry.  Some keys are open by the system or my other processes.

  Can you tell me what I need to do to work around this problem of backup of the registry?

  I look forward to receiving your response.

  Thank you

  Neil Clark.

   
  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  Monday, August 30, 2010 22:19

   

  Response of Windows Live Mechell P.

  Posted by Neil Clark

   

  Impossible to import C:\Documents and Settings\Compaq_Owner\My Documents\My Backup\Backup260910bkup.reg of register: not all data was successfully written to the registry.  Some keys are open by the system or my other processes.

  For this error, you must contact the Support Windows via Microsoft answers Forum link below:
  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=4

  Thank you
  Mechell P.

  Hi NeilRClark,

  When a registry key is blocked from change, the user can also run a. Registry Registry REG entries to merge the registry keys, values or the value in the system registry data, with the following permission denied error message:

  Cannot import RegistrationEntries.reg. Not all data was successfully written to the registry. Some keys are open by the system or other processes.

  To solve this problem, the ownership and grant full control (read and write) permissions and rights on the protected system registry key.

  Check out this link to do the same thing:

  How to capture a file or a folder in Windows XP

  To take ownership of a file or folder

• Suggestion: Firefox would not hold up to a shut down windows with a close multiple tab dialog box.

  I didn't know where to send a suggestions, so he posts here. Please redirect it to the appropriate location.

  When I shut down windows and firefox works with several tabs, it pops up a dialog box and prevents the closure of windows. Last Friday, I shut the computer down before leaving work and found that it was still on when I went back to work Monday. Reason - Firefox.

  I prefer computers stop when I am away for an extended period of time to save energy.

  Tools > Options > tabs: [] "warn me when closing multiple tabs".

• My PC will not restart or shut down

  Original title: problem with my pc

  HELO

  I would like to know why my pc won't restart or shut down.

  Can U help me?

  You can clean clean boot
  http://support.Microsoft.com/kb/331796
   
   
   
  --
  ..
  --
  "Smiley Face" wrote in message news: 2d-09a0ba35 87-4966-868e-fac601abb24d...
  > If have a computer acer laptop.
  >
  > When I want to close my laptop when I'm actually it works, just do
  > nothing. No error message does nothing.
  >
   
   

• How we shut down windows?

  How can we stop windows? Replay for me to stop windows. You can do this.

  Hello

  Sorry for the late reply. You have asked how to shut down Windows but did not mention the version of Windows you are using.

  However, check out this link if you are using Windows 8. Respond with more information so we can help you in a better way.

  Thank you.

• How can I get rid of the icon "shut down windows"? It appears from the beginning to the top!

  How can I get rid of the icon "shut down windows"? It appears from the beginning to the top!

  Hello jsitch, This thread has been created in the forum Desktop and personalization; the Microsoft moderation team has moved this thread to the Performance and maintenance Forum.

• Try to install purchased box.  Alls well until the last window when this message appears. INCONSISTENCY IN THE DATABASE OF THE INSTALLER. RESTART YOUR COMPUTER AND INSTALL IT AGAIN. Fact as stated several times and redisplays but same message?

  Try to install purchased box.  Alls well until the last window when this message appears. INCONSISTENCY IN THE DATABASE OF THE INSTALLER. RESTART YOUR COMPUTER AND INSTALL IT AGAIN. Fact as stated several times and redisplays but same message?

  Run the cleanup tool and manually delete the caps.db file.

  Important directories | Error postal codes of Mylenium

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

  When you reinstall, make sure that you run with user privileges sufficient and external tools like virus scanners do not interfere. This is why you have the question in the first place.

  Mylenium

• I shut down my pc, everything is recorded as usual, but the power of the pc is still on.

  I shut down my pc, everything is recorded as usual, but the power of the pc is still on. What is happening since last week. I hear the egnine the pc still work while windows xp is turned off.

  Hi Volarberg,

  1. did you of recent changes on the computer?

  2. you receive a message so that the closure of the computer?

  3. using laptop or desktop?

  Method 1

  See the link below and run the Fixit tool available, check if it helps.

  The problems of power consumption and extend laptop battery life

  http://support.Microsoft.com/mats/windows_battery_power_settings

  Method 2

  If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.