Unable to resume a link

Similar Questions

• Can't access "set your default programs." This discovered after having been unable to open the links on the web page of in posts emails?

  Tried to follow the online help to reset Internet Explorer and Outlook as default programs on my wife's computer. Cannot open "Set your default programs" we discovered the problem after being unable to open internet links in emails.

  This gives a test for the issue of the link.

  For hyperlinks does not, see below

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;310049

  I hope this helps.

• Why am I unable to send a link to a file from the clouds of paper on my android phone?

  Why am I unable to send a link to a file from the clouds of paper on my android phone?

  Hi John,.

  Yes, you can send a link to a file of domain controller.

  Open the PDF in Acrobat

  Click on the share on the set of the bottom link

  The pop-up tap on the public share of links

  This will create a link that you can copy or send.

  Thank you

  Abhishek

• I am unable to change the links page of the site and unable to see the file manager

  I have my site earlier designed by a guy, now he is not in contact, but I am unable to change the links page of the site and unable to see the file manager, even if I opened a session in Panel. admin help, please

  catalyst for business he did

  Did you get the site built through Muse?

  If this is the case then under settings, there will be an option to enable editing for content you will need to check.

  If this isn't the case, then the person who built the site you put authorized role which has no access to certain things, you can see that if you can go into the settings and roles and change it OR contact this person to give access you.

• Unable to resume: cannot find a valid process for peer

  I am unable to get my Windows 7 VM.

  I'm under VMware Fusion 4.1.2

  Mac OS X Lion 10.7.4

  I get two errors in the order. About 76percent resume progress, stop it and this happens:

  --------------------------------------------------------------------------------------------------------------

  VMware Fusion has encountered an error and has stopped Windows.

  Click on restart Windows to start Windows again. Click report for

  collect data and request the support of VMware.

  [Ignore]        [Report...]    [Restart Windows]

  --------------------------------------------------------------------------------------------------------------

  If I click on [reboot Windows] and then I get this:

  --------------------------------------------------------------------------------------------------------------

  Cannot find a valid peer to connect to

  
  

  [OK]

  --------------------------------------------------------------------------------------------------------------

  So it does not come.

  I found this page: http://communities.VMware.com/docs/doc-2890

  But when I went to/Library/Application Support / VMware Fusion / there was no Uninstall application we are talking about. :-/ so just for the sake doing so, I dragged everything in the trash, restarted and did drag and drop installation of VMware fusision 4.1.2

  Still does not work the same way.

  The Terminal with running VMware Fusion:

  Matts-MacBookPro: ~ rockinkat$ kextstat | grep vmware
  140 0 0xf000, 0xf000, com.vmware.kext.vmx86 (0068.31.85) 0xffffff7f80ec6000 < 7 5 4 3 1 >
  1 141 0xffffff7f80f50000 0xf000, 0xf000, com.vmware.kext.vmci (90.1.1) < 9 5 4 3 1 >
  142 0xffffff7f80f5f000 0 0 11000 x 0 x 11000 com.vmware.kext.vsockets (90.1.4) < 141 7 5 4 3 1 >
  143 0xffffff7f807c6000 0 0 x 7000 com.vmware.kext.vmioplug 0 x 7000 (0068.31.85) < 30 27 5 4 3 1 >
  144 0 0xa000 0xa000 com.vmware.kext.vmnet (0068.31.85) 0xffffff7f80861000 < 5 4 3 1 >

  
  

  Any idea what's going on?

  Hi RockinKat,

  Thanks for the papers, they provided a response, even if it isn't one, you'll like...

  You can run diagnostics on your hard drive.  The failure occurred while we were nothing more than loading in image memory from RAM to the Virtual Machine of the disk (from the file .vmem that goes along with the .vmss file), when suddenly everything stopped for 13 seconds, and then the machine virtual 'peers', died in a way that suggests very strongly that we had a patch of defective disc in the .vmem file.  We have not actually "running" of the virtual machine, we were just preparations foregoing.

  I would expect you might find errors to disk at this time (2012-05-16 21:21:04) reported in the newspapers of the host system: check in Applications > utilities > Consoleand watch Diagnostics opens a session, for example.

  It seems that this virtual machine is stored on the internal of your host drive (and not on an external drive).  If that were to happen on my Mac, I'll make sure extra I had good backups of critical data on this host drive (note that do not rely on the Time Machine to save a Virtual Machine), and then I would test the disc by running Apple Hardware Test and/or TechTool and finally disk first aid utility option.

  Let us know if you have any questions about the foregoing.  Good luck with it!

  --

  Darius

• Unable to see the link Analytics Server option in EA

  Hi all
  
  We installed and configured EAL 11.1.1 on our server. We have no error but now when connect us to EAS, we are unable to see the new EAL (Server Analytics link) option in the Regional service console.
  
  Can you please advice. Thanks in advance.
  
  Concerning

  Do you have you are importing the plugin in EAS - http://docs.oracle.com/cd/E17236_01/epm.1112/eal_install/frameset.htm?post_configuring.html

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Unable to solve broken links

  Hello
  
  I have a long list of broken links in my project that I am unable to solve. I have tried 3 things:
  
  I ran the report of broken links, and the entry for each broken link says "lack of subject xyz.htm is referenced by the following:"However, the report does not list what refers the subject. "
  
  If I right click on a link that is broken (from the project tab) and select Show the topic links in the menu that appears, RoboHelp displays an icon for the item in the right pane. However, there are no links to the topic. And question mark icon is red instead of the typical blue.
  
  If I right click on a link that is broken (from the project tab) and select see references in the menu that appears, RoboHelp shows the window of the section references. This window lists the "missing section", but no mention of lists. When I click on the button restore, I get this error message: the file name is not valid. The character "#" cannot be used in a pathname.
  
  All of my missing items have the # in the name. For example,.
  
  some_topic.htm #IX_reporting
  
  I think that these 'missing subjects' were created when I import a word document into the project. Anyone have an idea how I can remove and resolve these links broken?
  
  Thank you!
  

  Thanks Peter. In fact, I didn't have to try both methods. The bonds broken is solved... as if by magic it seems. Perhaps, I closed and reopened the project enough times.

• Unable to send a link in a text with the latest version of Thunderbird.

  Since the download of the latest version of Thunderbird, I can no longer create a link in a text.
  I emphasize the word, that I want the link to be associated with and click 'Insert', 'link' and when I try to paste the link in the link box, I get a message not declaring: "no named anchors or the positions on the page. This problem started with the new download.

  Dough press 'Ctrl' + 'V '.

  Make a right click you can only select "named anchors", so if you have none then you get the message 'None of the named anchors or headings on the page' otherwise you would get a pop-up showing the named anchors.

  This has been reported as a bug which you can vote for:
  https://Bugzilla.Mozilla.org/show_bug.cgi?id=1044336

• Unable to open a link in a web page, immediately goes down load and then when open it shows downloaded to the windows photo viewer, which does not open

  I open a web page, in the web page, there is a link to open another connection. I click on this link and doc is "downloaded" automatically, I click on the download button "green arrow" at the top of the screen, the page opens and says "windows Photo Viewer cannot open the image because the photo viewer does not support this file format or you don't have the latest version of photo viewer! I just want to open the link. Grateful for the advice.

  Where is - what happens? Please provide the URL.

• Satellite Pro C50 "unable to connect" when linking to Netgear WiFi

  WiFi error - could not connect to this network WNAP210 Netgear router.

  Hello

  I have a problem with my computer laptop connection with my router Wifi Netgear router WNAP210 model, when I type the password it says that it is unable to connect or sometimes that the password is incorrect!

  I contacted Netgear, and they suggested changing the name of the router to remove any trait symbols "_" underscore, I made it today but always this annoying message on the cell phone. It does the same thing on my Nokia Lumia 1320!

  I tried deleting found connections and starting from scratch and also changed the name of the router (which displays correctly when you scan for Wifi on the C50).

  Now it starts to get really wound up... Please please help?

  Thank you
  Adam.

  Hello

  You should check the configuration of the WLan router.
  First, you will need to use the same standard WLan (802.11 A/B/G/N) for the wireless network, as well as for the Wlan router.
  In the device-> Waln Manager map properties-> Advanced tab, you can choose the standard Wlan to Wlan card.
  You should also check the settings (WPA/WPA2 AES, TKIP) encryption. Not all standards are supported by each Wlan adapter! So please pay attention to this fact.

  Last but not least, you should also check if these connection problems using various channels (1-11)

• Unable to open the links on Web pages.

  I use a computer dv6-3025dx laptop with Win7 64 bit. "When you try to open the links on Web pages, it opens a new tab and say" connection "but everything goes ever further. In this case with most sites, even trusted sites. There are some who do, it is may be a parameter that HP put in place. My neighbor has the same problem on a HP laptop.

  Hello

  Try to download and install Firefox and see if you still have the same problem with opening of Web links.

  Kind regards

  DP - K

• Impossible to download and install KB 948465.Error code 80070570. Problem started when you try to install a package of new McAfee after uninstalling old. Also unable to follow the links in the e-mails. I tried the system restore.

  I can't return Macafee for them to help me

  When you uninstall McAfee, it often leaves remainders you need the tool to remove.

  You will have to contact McAfee yourself.
  Take the phone Option!

  It is a separate link under the Chat/email link.

  Click on 'Customer Service phone' > put to the United Kingdom as country > phone number > Contact McAfee
  
  
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/948465

  Information about Service Pack 2 for Windows Vista and Windows Server 2008

  http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?dg=microsoft.public.windowsupdate&tid=cc98f6bd-50b3-45f5-a40f-df9bfb708d11&cat=en_US_56d1dd45-de9e-4fc5-9bc1-2d1d0de6daee&lang=en&cr=US&sloc=&p=1

  Read the info at the link above.

  If the above does not, Windows Update issues:

  Windows Update Forum:

  This is the recovery and repair of Vista Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Unable to launch the links in emails

  Since the beginning of the year, when I click on a link in an email, it will not start.  I put the 'hand' on the link and it shows the url at the bottom of the screen, but when I click, it won't start.  Even if I press and hold the control button.  Should what settings I change to be able to launch links?  He used to work, but apparently some 'upgrade' of Microsoft has removed the ability.

  I use Outlook Express with an XP operating system.

  See www.oehelp.com/ielnk.aspx and www.oehelp.com/oelnk.aspx

  Steve

• hp3070a unable to connect tp-link tl-wr541g

  Hello

  I would like to print from my android Tablet using my hp printer.

  The two devices are connected to the tp-link access point.

  I think I understood that the printer requires a device with wps technology to connect to the radio.

  I think that my old access point is not equipped.

  Someone know how to skip this block and connect the printer to the radio?

  Download the manual here.  The user's Guide.

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us&DLC=en&LC=en&product=5068754

  Page 33 explains how to connect the printer with a traditional Wi - Fi connection.    Do not use WPS.

• uninstalled Microsoft netframe 3.5 is unable to find the link to reinstall?

  Original title:

  ASUS vibe 2.0

  I uninstalled Microsoft netframe 3.5 ' and know can not find the link to reinstall? Any body know this that AVG repeat this is not a site ok and protects me against downloading. I had to do this before and now cannot find the exact link. Thank you.

  Hi Darren,

  Windows 7 (all editions) includes the .NET Framework 3.5.1 as a component of the operating system.  This means that you will get the .NET Framework 2.0 SP2, 3.0 SP2 and 3.5 SP1 as well as a few post 3.5 SP1 bug fixes.  3.0 SP2 and 3.5 SP1 can be added or removed via the Control Panel programs and features. You can go to the Setup-program Panel and features — or turn off Windows features turn on - check the box next to Microsoft .NET Framework to enable this feature.

  In addition, refer to thislink.

  I hope this helps.