Unable to resume: cannot find a valid process for peer

Similar Questions

• Laptop in battery mode - ' could not find a valid process to connect to.

  Hi all

  I bought a new laptop transformer book Asus TX300 " ASUS transformer book TX300 - books & amp; Ultrabooks - ASUS "and install a trial of the 9.02 workstation to run 1 or 2 VM XP with older programs.

  Everything worked fine until I unplugged the power cord, I could not start virtual machines more, always get the "cannot find a valid process to connect to" and no newspaper generated!

  Could that be caused by some drivers (chipset or CPU) hardware since when in battery mode the configs are the same!

  I reinstalled workstation 2 - 3 times and no luck.

  The power is plugged in it works ok!

  Any help would be appreciated!

  Thank you

  After several hours looking for a solution, I found the problem... is the power management 'power4gear hybrid' that changed some settings!

  At full power, it works, as connect to AC power.

  Thnaks

• Cannot find a replacement battery for my Satellite Pro L450D - 12 X

  Cannot find a replacement battery for Toshiba laptop Satellite Pro L450D - 12 X part number: PSLY6E-00C004MP anywhere.

  Most of the battery available on internet as on eBay comes with the parts number PA3534U-1BRS, tried but did not work for my laptop. Links or information where I could buy the replacement battery for part number: PSLY6E-00C004MP would be appreciated.

  See you soon

  According to the specifications of the laptop, you can use PA3534U-1BRS PA3534U-1BAS battery with your laptop.
  Where to find them? I put t know where you live but try to use the part number of battery as a search term in Google for your country to find an online store where you can order.
  At least you can order it directly from the service provider of Toshiba in your country.

• RT: Remote desktop says "cannot find a device suitable for C drive.

  Hello

  There is a french position on exactly the same topic, but I can't apply the solution given here.

  My problem is this: I have a remote, ready to work as a target RT Office. It has been verified for compatibility, the hard drive has been formatted to FAT32, it was found by my host and received a static ip address. I installed the software, I need (LabView RT 9.0) using MAX. Now, when I try to boot with the option 'start using software installed on your hard drive', all I get is the message

  "Cannot find a device suitable for C drive.

  I have reset the BIOS, tried to format the drive hard in the other format, uninstalled and reinstalled the software, tried to start the pc target without the USB, but nothing seems to work.

  You have ideas on what goes wrong?

  Thank you

  Samuel

  Have you tried changing the settings of the BIOS for the hard disk controller?

  There could be different modes available.

  Refer to the hard drive of this document: http://zone.ni.com/devzone/cda/tut/p/id/8239?OpenDocument

• Error message: (translated from Dutch) 'Cannot find corresponding style page for the query.

  Error message: (translated from Dutch) ' cannot find corresponding style page for media interview "(see picture).

  I can't find what the problem with this page: steun Yolaine

  This message does not appear on the other pages of this site...

  What I've done wrong?

  Thanks in advance!

  Martian

  

  There are two things that are probably the origin of this error.

  Line 22 in your HTML code looks like this:

  Platform EM12c:
  Oracle Enterprise Linux 6.2 (x86_64)
  Oracle Enterprise Database 11.2.0.3 (x86_64)
  Enterprise Manager Cloud control Release 1 (12.1.0.1) 12 c (x86_64)
  --------------------------------------------------------------------------------------
  Problem:
  EM12c > objectives > databases > add
  Discovery of targets on the host: mcsdbora1.esri.com
  mcsdbora1. ESRI.com - cannot find the House discovered for plugin id:oracle.sysman.db
  --------------------------------------------------------------------------------------
  Notes:
  -Mcsdbora1.esri.com host is "Microsoft Windows x 64 (64-bit)"
  -EM12c is on Oracle Linux 6.2 (X86_64)
  -J' downloaded the latest version of the software Agent before adding the host
  "" EM12c > Setup > extensibility > Auto Update "before adding the host" "
  -Mcsdbora1.esri.com host is listed under "EM12c > objectives > Hosts".
  
  I found these articles in the support.oracle.com
  
  "How to manually add targets to the database in 12 c Cloud Control [ID 1371846.1]"
  
  "How to deploy the latest Plugin from database to the WHO and the Agent in 12 c Cloud Control [ID 1388143.1]"
  
  This last article, says updated the plug-in "Oracle Database". I checked and I do turn more later 12.1.0.1 connect.
  
  I wonder if I can only solve this bug, if I upgraded to Bundle 1 Patch (12.1.0.2) and install the 'Oracle' plug-in 12.1.0.2 database?
  
  Thank you
  
  Marcelo
  --------------------------------------------------------------------------------------

  BP1 is required for the management of the goals of Windows. So, you need to first upgrade your Linux WHO to BP1 and apply a few spots on the top before you can deploy plug-in on Windows machines. Support can provide you with the details.

• X 250 reports for SCCM 2007 boot disk WinPE "cannot find a valid network adapter."

  I built a 250 X with Win7sp1 Enterprise, used Lenovo System Update to update all drivers, driver and creates a new package of drivers of SCCM 2007.

  I added the driver v 12.12.80.1950 Intel I217-LM to the Boot Image, distributed to distruting SCCM points and created a new USB stick to boot using the SCCM Assistant.

  When I boot on the USB drive I get the message "cannot find a network adapter valid."

  I can use the ignition key on a 240 X without any problems.

  I can see the pilot I217-LM in the boot image. When I connect locally on the laptop, I can connect to a share on another PC, so the driver and connecting to the LAN function. It is only during boot on the key of USB startup problem occurs.

  Any help much appreciated.

  Problem solved.

  The boot image, I added the driver to was "not to inject a ConfigMgr driver", I created a new boot image added three drivers NET from the driver package provided by Lenovo SCCM for X 250 and the laptop can now connect to the SCCM server.

• Error "Setup cannot find a valid installation of windows registry Flight Simulator" during the installation of Flight Simulator

  Original title: INSTALLATION OF FLIGHT SIMULATOR (JUST FLIGHT 767 200/300 SERIES)
  
  I BOUGHT (JUST FLIGHT 767 200 / 300 SERIES) ON A CD, WHEN I TRIED TO INSTALL IT ON MY PC, THE FOLLOWING ERROR MESSAGE APPEARS:-"UNABLE TO FIND A VALID WINDOWS SETUP REGISTRY FLIGHT SIMULATOR FACILITY", AS ARESULT, I CAN'T INSTALL OR RUN FLIGHT SIMULATOR PROGRAM

  MUCH THANKS

  HAMZA

  It sounds like what you have bought is a third-party add-on for Microsoft Flight Simulator. If that's what you have, it will not work as a standalone program and it can not be installed without its own version of the flight simulator designed for already installed. In order to launch this module, you will have everything first purchase and install the Microsoft Flight Simulator.

• Cannot find a valid peer to connect to

  Setup

  ASUS Z8NA-D6 double socket 1366 edge

  2 x Intel Xeon X 5550 (1366, Quad 2.66 GHz, QuickPath 1 x 6.4 GT/s)

  12 GB (6 x 2 GB) DDR3 PC3-10600 (DDR3-1333), 9 (Kingston ValueRAM KVR1333D3E9SK3 / 6GI)

  Intel X 25-M Postville SSDSA2MH160G2C1, 160 GB SATA - 300

  Western Digital Velociraptor WD3000GLFS, 300 GB, SATA - 300, 16 MB 10000 RPM

  Windows 7 64 bit OEM operating system / Ultimate

  Don't run Vmware 6.5.3.185404 no problem

  Upgrade to VMware-workstation-full - 7.0.0 - 203739

  is msg can not find a valid peers to connect to.

  When I try to start a virtual machine

  reboot without effect

  Uninstall VMware-workstation-full - 7.0.0 - 203739 and install Vmware VM 6.5.3.185404 rerun

  PC installed about 6-8 times the same problem (clean install)

  Installed VMWARE as an administrator without effect

  log.rotatesize = 10000

  log.keepold = 2

  Did not help

  Restart the vmx86 service, using cmd that something like 'net start vmx86' did not help also

  VMWare authorization Service is running fine without change service restart

  a google, but after a month without sutch chance

  For VMware Workstation 7, Intel Server CPU X55xx only works with version 169612 or earlier...

  For the later version number, you must use D0 Stepping of the Intel Server CPU X55xx

  For this version of 169612 I find works very well in most cases.

  and you can use later license to keep turn - until you change your CPU in an official release.

  Hope this helps.

  Happy ThanksGiving Day!

• L G GT400 Mobile device cannot find a device driver for this phone to connect to a P C

  Trying to download pictures from the mobile, but windows cannot find a driver

  Hello

  See the following article to get the drivers for GT400 mobile.

  Product support for GT400
  http://www.LG.com/NZ/support/product/support-product-profile-mobile-Redux.jsp?customerModelCode=GT400&initialTab=drivers&TargetPage=support-product-profile-mobile-Redux

• Cannot find HP 540 drivers for 64-bit

  Hello

  I've recently updated my operating system to Windows Vista 64-bit. I am unable to find to support drivers for the same. When I check the web page of the driver it shows only Windows XP and Vista 32-bit drivers. Before that I had XP and download the drivers for the XP edition at the time ' there used to be list of 64-bit of Windows Vista, but now his party while 32-bit drivers are listed for XP and Vista

  T5670 Core2Duo, 2 GB of RAM in my laptop (HP 540 companies) features.

  Help out me

  Sudeep

  Try the driver from Intel HERE site

• Satellite A500 - cannot find the display drivers for Windows 7

  I can't find the video drivers for Satellite A500 - 1 c 0, P/N: PSAR3E for Windows 7 x 86.

  I tried on the Nvidia site, they recommended the manufacturer's website...

  Hello

  Normally, you can get all the drivers here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  I checked this and it seems that for the moment no are no 32 bit Windows 7 drivers available.

  What you can do now is looking for other display drivers. Maybe an another Toshiba laptop has the same graphics card and it has Windows 7 drivers released.
  Otherwise, you can try the 32-bit drivers for Vista. Normally, they also work on Windows 7.

• Satellite L300D - cannot find the XP driver for the graphics card

  Hello

  I just bought a Toshiba Satellite L300D and I installed Windows XP (instead of vista, which was preinstalled). I can't find the XP driver for the graphics card... Everest recognizes him as ATI RS690M. A download link will send me straight to heaven!

  Thank you in advance,

  Nikos

  PS. of course, I searched the display on the sites of several Toshiba driver and I got this message: "the resource you are looking for has been removed, had its name changed, or is temporarily unavailable."

  After that, I tried the driver from ATI, and it seems that they are more home driver for XP.

• Cannot find an email address for HP LaserJet Pro M1213nf to use eprint

  I updated the firmware and print the Self/Configuration of Test page, but I can't find the email address for eprint.  Any suggestions?

  Thank you Shane.  I have used IE instead of Chrome and I was able to connect and get the email address.  Printer works very well in my smart phone.  Appreciate your help.  Randy

• cannot find Ethernet controller drivers for hp 15-do17tu

  Mr President!

  I could not find ethernet controller drivers for my hp 15-d017tu

  Here is its hardware ID

  PCI\VEN_10EC & DEV_8136 & SUBSYS_218F103C & REV_07
  PCI\VEN_10EC & DEV_8136 & SUBSYS_218F103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200

  Hello

  Realtek LAN driver is on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64340.exe

  Kind regards

  DP - K