Unable to run .exe files without using runas:administrator

Similar Questions

• A link to the files without using the FScommand folder

  Is there a way to bind an executable Flash to doc, pdf, and other exe files without using a 3rd third party tool or the FScommand subfolder? I want all the files in the root folder. Is there a solution to actionscript (Flash 8)?
  
  Thanks for any help.

  Just tried it myself, and in fact, now there must be something inside the fscommand that blocks execution of vbs. Security? I'm sorry.
  My advice would be to use .bat files, but to write
  Start c:\test.txt
  instead of only
  c:\test.txt
  The DOS window still not open, but immediately close again, given that the start command returns immediately.
  All the best
  Wolf

• Is there a way to recover the deleted files without using any software?

  Is there a way to recover the deleted files without using any software?

  Is there a way to recover the deleted files without using any software?

  # Software is necessary.

  First check the recylcl tray. If she isn't here, read the following:

  "Deleting" a file does not delete actually it brand just space be used. There are third-party programs that can sometimes recover deleted files. The problem is that the space used by the file is likely to be replaced very quickly, and this makes the unrecoverable file.

  So your chances of successfully recover this file are decent, if you try it again immediately after deleting it and quickly down. If you have used the computer since then (for example to read this answer and write that question), your chances may be very weak now.

  But if the file is large enough, it's still worth a try. Stop using the computer in question immediately, if you haven't done so already. Download an undelete program (in here is one: http://www3.telus.net/mikebike/RESTORATION.html but there are many other choice; do a search) on a friend's computer and bring it to you on a diskette, CD, or drive to the thumb.

  If that fails, your only recourse is to bring or send the drive to a professional file recovery company. This kind of service is very expensive and may or may not work in your case.

• How can I recover deleted files without using any software?

  How can I recover deleted no matter what folder, image, Word & excel files without using any software inculd Recycle Bin?

  Monday, June 11, 2012 11:03:01 + 0000, dipakparate wrote:

  How can I recover deleted no matter what folder, image, Word & excel files without using any software inculd Recycle Bin?

  You cannot retrieve files deleted with the help of software. And even using
  software, you may or may not be able to recover.

  What you have against the use of software? The first thing to try is to
  being trash. If she isn't here, read on.

  "Deleting" a file does not actually delete it marks just the space
  also available to be used. There are third-party programs that can
  sometimes recover deleted files. The problem is that the space used by
  the file is likely to be replaced very quickly, and it makes
  the unrecoverable file.

  So your chances of successfully recover this file are decent if you
  Try it again immediately after the deletion of it and go quickly
  downhill from there. If you have used the computer since then (for
  example to write this question and read this answer), your chances may
  be very poor now.

  But if the file is large enough, it's still worth a try. Stop
  using the computer in question immediately, if you have not done
  already. Download an undelete program (and here's one:)
  http://www3.TELUS.NET/mikebike/restoration.html but there are several
  others to choose from; Do a search) on a friend's computer (do not
  it on yours because that would overwrite the files you want
  Undelete) and bring it to you on a CD or thumb drive to try.

  If that fails, your only recourse is to bring or send the disc
  a company of professional file recovery. This kind of service is very
  expensive and may or may not work in your case.

  Ken Blake, Microsoft MVP

• Export data in a flat file without use of FL

  Hello
  
  I'm looking for options where I can export data into a flat file without using a FL (line Layout) i.e., using only the App Engine.
  
  Please share your experience if you did something like this
  
  Thank you

  A simple way to export any folder (table/view) to a csv gall, is to create a set of lines and loops through all fields of record like below example code

  Local Rowset &RS;
  Local Record &Rec;
  Local File &MYFILE;
  Local string &FileName, &strRecName, &Line, &Seperator, &Value;
  Local number &numRow, &numField;
  
  &FileName = "c:\temp\test.csv";
  &strRecName = "PSOPRDEFN";
  &Seperator = ";";
  
  &RS = CreateRowset(@("Record." | &strRecName));
  &RS.Fill();
  
  &MYFILE = GetFile(&FileName, "W", %FilePath_Absolute);
  
  If &MYFILE.IsOpen Then
  
     For &numRow = 1 To &RS.ActiveRowCount
        &Rec = &RS(&numRow).GetRecord(@("RECORD." | &strRecName));
  
        For &numField = 1 To &Rec.FieldCount
           &Value = String(&Rec.GetField(&numField).Value);
           If &numField = 1 Then
              &Line = &Value;
           Else
              &Line = &Line | &Seperator | &Value;
           End-If;
  
        End-For;
        &MYFILE.WriteLine(&Line);
     End-For;
  
  End-If;
  
  &MYFILE.Close(); 
  

  You can of course create an application for generic class call this piece of code.

  It will be useful.

  Note:
  Do not complain to me ;) on performance issues

• Run the exe file without installing labview

  I created my labview in exe file. I need to run this exe file on another computer that have no application in labview. It is afficherapres when I try to run it. What should I do without installing labview application in another computer?

  
  

• How to open data.bin file without using exe?

  I had downloaded a game on the internet its really big in size, I downloaded 2 GB of files and when decompressing, it would be gb(that's_what_the_installer_say).i 8-5 files there are 4 data1.bin, data2.bin and so on until data4.bin and one installer with it, but when I install with installer there is unpack to the slowly so I want to decompress without using the installer some alternative program to make it work. But when I try to open it with ultra iso or winrar it shows the error invalid or unknown format. What should do? Sorry for my bad English.

  A .bin file is a binary data file, you cannot unpack without the program who can read binary data.  You must continue to use the correct Installer.

• Cannot open exe. files without pop up asking what program to use to open the file

  My PC has been infected! I have Windows XP. When I try to open any exe. file, I get a pop-up window asking me what program to open the file with. Any suggestions on how to fix this problem myself?

  Hello
  This problem occurs when your .exe file associations are broken. This is usually caused by malicious software that changes the default file associations in Windows. Follow these instructions to resolve this problem:
  Then try following the steps in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide
  It contains instructions which will remove most malware infections. If you have any questions, just ask me. I hope this helps you.
  Brian

• Svchost.exe file LocalSystemNetworkRestricted using too much RAM

  The file svchost.exe (LocalSystemNetworkRestricted) uses too much RAM, almost 1/2 of it.  There are also several svchost.exe files (no limit) and the indexer uses a lot of RAM too. I have already associated the indexer return. I suspect that it is the cause of my favorite right-click with windows Explorer.  I have 4 GB of RAM, small basic programs, file clean constantly and the computer is still slow.  How can I fix it?  Test/scan etc. ?  HELP.............................

  2computercrazy

  Hello

  Follow the steps below and check if that helps.

  Method: Scan the System File Checker.

  http://support.Microsoft.com/kb/929833

  Method 2: I suggest you to check the boot issue.

  1. click on start, type msconfig in the search box and press ENTER.
  The user account control permission.
  If you are prompted for an administrator password or confirmation, type
  password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load starting points.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.
   
  If the problem is resolved, make sure what third-party program is at the origin of the problem, referring to the link given below:
  http://support.Microsoft.com/kb/929135
   
  Reset the computer to start as usual.
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
  When you are prompted to restart the computer, click on restart.

  Method 3:Follow the steps below to solve the problem

   1. click on start-> in start search, type "services.msc" (without the quotation marks) in the Open box and click OK.
  2. double-click on the service "Windows Update".
  3. click on the tab to open a session, please make sure that the option "Local System account" is selected and the option "Allow service to interact with desktop" is unchecked.

  4. check if this function has been activated on the hardware profile listed. If this isn't the case, please click the Enable button to enable it.
  5. click on the "Général" tab Make sure the "Startup Type" is "automatic". Then please click the button "Start" under "Status of Service" to start the service.
  6. repeat the above steps with the other service: (BITS) Background Intelligent Transfer Service

  Method 4: I suggest that you want to run a virus scan on your computer.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  I suggest you to provide us with the information from the event log.

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

• Unable to save the files without permission admin when logged in as an administrator.

  Trying to update my Garmin GPS & need for dowhload a .exe file on my desktop.  Get this - "you don't have permission to save in this location.  Contact the administrator for approval. "I'm currently logged on as administrator.  Tried to d/l to other locations, but get the same message.  Same problem d/l w/other attempts, too.  Help!

  go to programs, then Accessories go to 'RIGHT CLICK' command prompt and run as administrator the prompt will look like this (C: \windows\system32) type at the prompt the following: net user administrator / active: No. This should solve this problem

• Unable to download .exe files

  I recently bought a HP Pavilion Notebook with Vista 32 bit SP1. My problem is that I can't download files .exe from the internet. In Firefox and Internet Explorer, the download box appears, I'm prompted to choose where the file should be saved and then nothing happens. I tried reseting IE as the Defender disablin but still no go (got this trick from HP support).

  I use a D-link DGL-4300 router and F-secure and I tried both set my computer in the demilitarized zone and allowing all the internet traffic of F-secure but ut still does not work. Another computer on the same network with XP have no problem download.

  Found a similar problem in this http://social.answers.microsoft.com/Forums/en-US/vistaperformance/thread/565d9f86-42cd-40a8-bb0a-819526466b7d/ thread, but that seems not solved.

  MVH
  BB

  Hello Baronbengt,

  Thank you for posting.  Download of .exe files has been disabled in most internet browsers for awhile now as a protection against the evil-ware and viruses.  Download a .exe file that is not in a container (zipped or some form of compression) is likely to be something nasty to your computer.

  Please let me know if this helps you.

  Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• How can I remove a strain using layers to export the file without using the bridge

  In earlier versions of Photoshop, I was able to comment on the part of the "Export of Layers.jsx" folder and was able to remove the sequence number before each layer after export. Does anyone know how to do this for the current version of CC2015 without using a bridge or a post-secondary program?

  Found the answer. Open the export of layers for files.jsx file in Dreamweaver and

  Comment out the line 1066

  On line 1067 change '_' for «»

• With the changes made in the Adobe Acrobat DC he has made things more difficult for me. All I want to do is to rename a file. Used to be simple. Please tell me how to rename a file without using the cloud. I'm not paying for storage when I have an SD card

  Hate the new update.  I need to rename files and cannot do without using the cloud.  Could not sign in the cloud free services.  Someone knows how to rename the files with Adobe Acrobat DC? I use a HD with Android corner.

  Do you have any file manager installed on your device? This feature is no longer available in the latest version of Acrobat DC but we actively seek to provide the same in one of our future releases. To work around the problem, you will need to duplicate/rename the files using a third-party file manager application.

• Is there a way I can get a photo 360 degrees in a pdf file without using flash (because of iPad)

  Hi all

  My client wants a rotation of 360-degree images in a pdf file that can be read on an iPad, to give to its sellers. 3D photography is not a problem. But how can I get in pdf format, without using the Flash (as Flash is not accepted on Apple).

  Thanks in advance.

  See you soon,.

  Henk

  You can't, and that's all.

  Mylenium

• How to reduce the size of the excel file without using any software?

  my current file is 2 MB, how can I reduce the file size becomes a few hundreds KB only. I have seen that some files can reduce to 1 KB (directed by my previous colleague). How to reduce a large file to small fie size in excel?

  You can compress any file using the Windows 7 built in zip program. For the pease method see:

  http://windows.microsoft.com/en-US/windows7/Compress-and-uncompress-files-zip-files?SignedIn=1 .

  Will depend on the size of the file compressed on the original files - it's maybe not as small as you want.