Linksys rv042 http access port
How do I change from port, allowing to connect my on RV042 router admin panel?
I need to translate the port 80 to the intranet address and connect to the RV042 using something like 192.168.0.1:8080 or any other port.
Sorry for mistakes, I'm not very good in English.
Translation of port 80 to the server on the local network works, server available from his name and his router available to port 8080.
Solved.
Tags: Linksys Routers
Similar Questions
-
VPN PIX 506e to Linksys RV042?
I'm kind of a rookie of Cisco and need help to set up a virtual private network:
I replaced a Netopia R910 with a Linksys RV042. I have set the parameters of the best that I could. I am trying to reconnect the VPN site to site of our network (192.168.0.x private, public xxx.xxx.109.202) to the remote network (xxx.xxx.131.50 192.168.38.x and private, public).
In the Linksys VPN shows connected but no traffic coming. I can't ping anything on the remote subnet.
It worked fine with the R910 and no settings have changed on the PIX, other new pre-shared keys that match.
Here are the PIX config and the RV042 config is attached as an image.
Thank you very much for your help!
Building configuration...
: Saved
:
PIX Version 6.3(3)
interface ethernet0 auto
interface ethernet1 auto
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password ************ encrypted
passwd *************** encrypted
hostname pixfirewall
domain-name ciscopix.com
clock timezone PST -8
clock summer-time PDT recurring
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
name 192.168.1.0 FirstStreet
name 192.168.38.2 Sco
name xxx.xxx.130.94 FirstWan
name 192.168.4.0 Oakurst
name 192.168.7.0 Clovis
name 192.168.3.0 Madera
name 192.168.0.0 TomJ
name xxx.xxx.131.58 FMLFirst
name xxx.xxx.131.22 Integrity
name 192.168.6.0 TJhome
name 192.168.38.10 Server2
name xxx.xxx.117.182 ClovisPublicIP
name xxx.xxx.100.239 OakurstPublicIP
name xxx.xxx.174.185 MaderaPublicIP
name 192.168.38.64 VideoS1
object-group network FMLRemoteOffices
description Public IP's and Internal Subnets for All Remote Offices
network-object OakurstPublicIP 255.255.255.255
network-object MaderaPublicIP 255.255.255.255
network-object ClovisPublicIP 255.255.255.255
network-object xxx.xxx.109.202 255.255.255.255
access-list inside_outbound_nat0_acl permit ip 192.168.38.0 255.255.255.0 Clovis 255.255.255.0
access-list inside_outbound_nat0_acl permit ip 192.168.38.0 255.255.255.0 Oakurst 255.255.255.0
access-list inside_outbound_nat0_acl permit ip 192.168.38.0 255.255.255.0 TJhome 255.255.255.0
access-list inside_outbound_nat0_acl permit ip 192.168.38.0 255.255.255.0 Madera 255.255.255.0
access-list inside_outbound_nat0_acl permit ip any host 192.168.38.248
access-list inside_outbound_nat0_acl permit ip any 192.168.38.248 255.255.255.248
access-list outside_access_in permit tcp any host xxx.xxx.131.54 eq https
access-list outside_access_in permit icmp any any echo-reply
access-list outside_access_in remark Sage e-prescription service 8423
access-list outside_access_in permit tcp any host xxx.xxx.131.54 eq 8423
access-list outside_access_in permit tcp any host xxx.xxx.131.53 eq 1202
access-list outside_access_in permit tcp any host xxx.xxx.131.52 eq 7000
access-list outside_cryptomap_20 permit ip 192.168.38.0 255.255.255.0 Clovis 255.255.255.0
access-list outside_cryptomap_80 permit ip 192.168.38.0 255.255.255.0 Oakurst 255.255.255.0
access-list outside_cryptomap_120 permit ip 192.168.38.0 255.255.255.0 Madera 255.255.255.0
access-list outside_cryptomap_100 permit ip 192.168.38.0 255.255.255.0 TJhome 255.255.255.0
no pager
logging on
icmp permit any echo-reply outside
icmp permit any echo-reply inside
mtu outside 1500
mtu inside 1500
ip address outside xxx.xxx.131.50 255.255.255.248
ip address inside 192.168.38.4 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
ip local pool VPNDHCP 192.168.38.248-192.168.38.252
ip local pool DHCP39 192.168.39.1-192.168.39.254
pdm location Integrity 255.255.255.255 outside
pdm location 192.168.38.0 255.255.255.0 inside
pdm location FirstStreet 255.255.255.0 inside
pdm location FirstStreet 255.255.255.0 outside
pdm location Sco 255.255.255.255 inside
pdm location FirstWan 255.255.255.255 outside
pdm location Oakurst 255.255.255.0 outside
pdm location Clovis 255.255.255.0 outside
pdm location TJhome 255.255.255.0 outside
pdm location Madera 255.255.255.0 outside
pdm location TomJ 255.255.255.0 outside
pdm location 0.0.0.0 255.255.255.255 outside
pdm location xxx.xxx.141.217 255.255.255.255 outside
pdm location 192.168.38.111 255.255.255.255 inside
pdm location 192.168.38.3 255.255.255.255 inside
pdm location FMLFirst 255.255.255.255 outside
pdm location xxx.xxx.130.15 255.255.255.255 outside
pdm location 128.0.0.0 128.0.0.0 outside
pdm location xxx.xxx.109.202 255.255.255.255 outside
pdm location Server2 255.255.255.255 inside
pdm location ClovisPublicIP 255.255.255.255 outside
pdm location OakurstPublicIP 255.255.255.255 outside
pdm location MaderaPublicIP 255.255.255.255 outside
pdm location 192.168.38.248 255.255.255.255 outside
pdm location TomJ 255.255.255.0 inside
pdm location VideoS1 255.255.255.255 inside
pdm location 192.168.38.21 255.255.255.255 inside
pdm group FMLRemoteOffices outside
pdm logging debugging 500
no pdm history enable
arp timeout 14400
global (outside) 1 xxx.xxx.131.51
nat (inside) 0 access-list inside_outbound_nat0_acl
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) xxx.xxx.131.54 Server2 netmask 255.255.255.255 0 0
static (inside,outside) xxx.xxx.131.53 192.168.38.21 netmask 255.255.255.255 0 0
static (inside,outside) xxx.xxx.131.52 VideoS1 netmask 255.255.255.255 0 0
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 xxx.xxx.131.49 1
route inside FirstStreet 255.255.255.0 192.168.38.254 1
timeout xlate 3:00:00
timeout conn 4:00:00 half-closed 2:00:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
aaa authentication ssh console LOCAL
http server enable
http Integrity 255.255.255.255 outside
http xxx.xxx.141.217 255.255.255.255 outside
http xxx.xxx.109.202 255.255.255.255 outside
http 192.168.38.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
sysopt connection permit-pptp
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto dynamic-map outside_dyn_map 30 set transform-set ESP-DES-MD5
crypto dynamic-map outside_dyn_map 50 set transform-set ESP-3DES-MD5
crypto map outside_map 20 ipsec-isakmp
crypto map outside_map 20 match address outside_cryptomap_20
crypto map outside_map 20 set peer ClovisPublicIP
crypto map outside_map 20 set transform-set ESP-DES-MD5
crypto map outside_map 80 ipsec-isakmp
crypto map outside_map 80 match address outside_cryptomap_80
crypto map outside_map 80 set peer OakurstPublicIP
crypto map outside_map 80 set transform-set ESP-DES-MD5
crypto map outside_map 100 ipsec-isakmp
crypto map outside_map 100 match address outside_cryptomap_100
crypto map outside_map 100 set peer xxx.xxx.174.234
crypto map outside_map 100 set transform-set ESP-DES-MD5
crypto map outside_map 120 ipsec-isakmp
crypto map outside_map 120 match address outside_cryptomap_120
crypto map outside_map 120 set peer MaderaPublicIP
crypto map outside_map 120 set transform-set ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
isakmp enable outside
isakmp key ******** address xxx.xxx.141.217 netmask 255.255.255.255 no-xauth no-config-mode
isakmp key ******** address ClovisPublicIP netmask 255.255.255.255 no-xauth no-config-mode
isakmp key ******** address xxx.xxx.64.82 netmask 255.255.255.255 no-xauth no-config-mode
isakmp key ******** address xxx.xxx.67.172 netmask 255.255.255.255 no-xauth no-config-mode
isakmp key ******** address OakurstPublicIP netmask 255.255.255.255 no-xauth no-config-mode
isakmp key ******** address xxx.xxx.24.157 netmask 255.255.255.255 no-xauth no-config-mode
isakmp key ******** address xxx.xxx.174.234 netmask 255.255.255.255 no-xauth no-config-mode
isakmp key ******** address xxx.xxx.88.137 netmask 255.255.255.255
isakmp key ******** address MaderaPublicIP netmask 255.255.255.255 no-xauth no-config-mode
isakmp key ******** address xxx.xxx.109.202 netmask 255.255.255.255 no-xauth no-config-mode
isakmp policy 20 authentication pre-share
isakmp policy 20 encryption des
isakmp policy 20 hash md5
isakmp policy 20 group 2
isakmp policy 20 lifetime 86400
isakmp policy 40 authentication pre-share
isakmp policy 40 encryption 3des
isakmp policy 40 hash md5
isakmp policy 40 group 2
isakmp policy 40 lifetime 86400
vpngroup FMLREASYVPN address-pool VPNDHCP
vpngroup FMLREASYVPN dns-server 192.168.38.3
vpngroup FMLREASYVPN idle-time 1800
vpngroup FMLREASYVPN password ********
vpngroup Brevium address-pool VPNDHCP
vpngroup Brevium dns-server 192.168.38.3
vpngroup Brevium idle-time 1800
vpngroup Brevium password ********
telnet 192.168.38.0 255.255.255.0 inside
telnet TomJ 255.255.255.0 inside
telnet timeout 5
ssh Integrity 255.255.255.255 outside
ssh 99.15.109.202 255.255.255.255 outside
ssh timeout 5
management-access inside
console timeout 0
vpdn group PPTP-VPDN-GROUP accept dialin pptp
vpdn group PPTP-VPDN-GROUP ppp authentication chap
vpdn group PPTP-VPDN-GROUP ppp authentication mschap
vpdn group PPTP-VPDN-GROUP ppp encryption mppe auto
vpdn group PPTP-VPDN-GROUP client configuration address local VPNDHCP
vpdn group PPTP-VPDN-GROUP client configuration dns 192.168.38.3
vpdn group PPTP-VPDN-GROUP pptp echo 60
vpdn group PPTP-VPDN-GROUP client authentication local
vpdn username admin password *********
vpdn username tonette password *********
vpdn username rosie password *********
vpdn username cts password *********
vpdn username MaderaFMLR password *********
vpdn username ruth password *********
vpdn username fogg password *********
vpdn username lanier password *********
vpdn username lanier2 password *********
vpdn username justin password *********
vpdn username mike password *********
vpdn username heather password *********
vpdn username Brevium password *********
vpdn username jeremiah password *********
vpdn enable outside
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd auto_config outside
username admin password *************** encrypted privilege 15
terminal width 80
Cryptochecksum:******************************
: end
[OK]
NAT exemption, you must add the following:
inside_outbound_nat0_acl ip 192.168.38.0 access list allow TomJ 255.255.255.0 255.255.255.0
-
HTTPS access to the router does not work with Firefox 33.0
HTTPS access to the router Linksys wrt610n has worked so that Firefox 32.0.3 the dd - wrt software of this router is self-signed certificate with the public key RSA = 512 bits (Yes, it's too short today). From Firefox 33.0 and whose 34, 35, 36-access https does not work. It is desirable to restore https behavior as in Firefox 32.0.3 (with warning and ability to do security exception). Please see the attachment with a https query result in different versions of Firefox.
Thank you.Hello, make suggestions to the https://support.mozilla.org/en-US/questions/1038487 help in your case?
-
ACS5.3: stopped working https access
For some reason I can't get more access to the web interface of our ACS 5.3 apparatus.
Where I used to get a certificate warning first, and after that the ACS5 login screen, I now get totally unanswered more in my IE browser.
However, I can telnet to port 443 of the unit. And I (luckily) always ssh access the unit. So I did a reload (sorry, microsoft patterns), but that will not solve anything.
HTTPS access to other systems of the same browser works very well
=================================
Admin # sh ver
Deploying applications engine Cisco OS version: 1.2
ADE-OS Build Version: 1.2.0.228
ADE-OS System Architecture: i386Copyright (c) 2005-2009 by Cisco Systems, Inc.
All rights reserved.
HostName:Version information for the installed applications
---------------------------------------------Cisco ACS VERSION INFORMATION
-----------------------------
Version: 5.3.0.40.8
The identifier for the internal version: B.839
Patches:
5-3-0-40-5
5-3-0-40-8=================================
What version of IE are you using? A newer version of Internet Explorer, you cannot open secured pages that have less force encryption.
Have you tried another browser? In case it works well with firefox or google chrome follow it please the below listed as follows:
There could be a possibility that you have downloaded and applied some update Windows on your machine and that could have changed the level of encryption of minRSAPubKeyBitLength REG_DWORD 512 to higher values.
The command listed below will set the registry to 512
Go to the PC from which you access ACS > start > run > cmd > run the below listed order
C:\Users\Employees>certutil - setreg chain\minRSAPubKeyBitLength 512
Once you have finished, try again and let us know.
Jatin kone
Kind regards-Does the rate of useful messages-
-
Site to Site VPN between PIX and Linksys RV042
I am trying to create a tunnel between a 506th PIX and a Linksys RV042 vpn . I configured the Phase 1 and Phase 2 as well as the transformation defined and interested traffic and connected to the external interface, but it will not create the tunnel. Configurations are as follows:
506th PIX running IOS 6.3
part of pre authentication ISAKMP policy 40
ISAKMP policy 40 cryptographic 3des
ISAKMP policy 40 sha hash
40 2 ISAKMP policy group
ISAKMP duration strategy of life 40 86400
ISAKMP key * address 96.10.xxx.xxx netmask 255.255.255.255
access-list 101 permit ip 192.168.21.0 255.255.255.0 192.168.1.0 255.255.255.0crypto map Columbia_to_Office 10 ipsec-isakmp
crypto Columbia_to_Office 10 card matches the address 101
card crypto Columbia_to_Office 10 set peer 96.10.xxx.xxx
10 Columbia_to_Office transform-set ESP-3DES-SHA crypto card game
Columbia_to_Office interface card crypto outsideLinksys RV042
Configuration of local groups
IP only
IP address: 96.10.xxx.xxx
Type of local Security group: subnet
IP address: 192.168.1.0
Subnet mask: 255.255.255.0Configuration of the remote control groups
IP only
IP address: 66.192.xxx.xxx
Security remote control unit Type: subnet
IP address: 192.168.21.0
Subnet mask: 255.255.255.0IPSec configuration
Input mode: IKE with preshared key
Group Diffie-Hellman phase 1: group2
Phase 1 encryption: 3DES
Authentication of the phase 1: SHA1
Life of ITS phase 1: 86400
Phase2 encryption: 3DES
Phase2 authentication: SHA1
Phase2 life expectancy: 3600 seconds
Pre-shared key *.I'm a novice on the VPN. Thanks in advance for your expertise.
Yes, version PIX 6.3 does not support HS running nat or sh run crypto.
Please please post the complete config if you don't mind.
Please also try to send traffic between subnets 2 and get the output of:
See the isa scream his
See the ipsec scream his
-
Compare Dot1Q and QinQ with access ports and trunk?
Hi all
How do you compare Dot1Q and QinQ with access ports and trunk?
Thank you
Sunil Kumar
Hey, Sunil,.
With regard to your questions:
1. we have a case of Dot1Q configured on the port of access of habit? If not, then why? - Dot1q aims to tag executives leaving the switch and access is opposite, it does not therefore not used together marking.
2. how the topology would be for QinQ case? - For QinQ as I mentioned in my last post one side will be set to while links to access than others. A simple example is explained on this link:http://networklessons.com/switching/802-1q-tunneling-q-q-configuration-example/
HTH.
Kind regards
RS.
-
How to configure both HTTP listening ports?
Hello
We have two applications is SALES and other is DSS, both are running on the same form and report server, by using the URL below:
http://hostname.domain .com:7777/Forms/frmservlet?config=Sales
http:// hostname.domain.com : 7777/forms/frmservlet? config = dss
SALE application accessed from inside the local domain, and
DSS access from outside the area.
So, we put this port 7777 # as open on the firewall for users the and remote, this parameter
DSS users also have to display the login screen by using the URL: http://hostname.domain.com:7777/forms/frmservlet?config=sales
Problem is we want to configure a different port # inseated 7777, and this port will have access only from the Interior of the field.
So, how we can configure HTTP two ports on the forms and server 10g?
OR
Is their any solution to ensure the envoirnment?
Concerning
Post edited by: 991464
991464 ha scritto:
How can we configure both HTTP ports on the forms and server 10g?
In the httpd.conf file , add a line like
Listen 7780
7780 with your change. Restart the HTTP server.
-
Hello world
I use FMS on CentOS-5 with Apache proxy on port 8134.
It works great except for one thing: when I start the FMS and httpd services, everything is fine but after a while, say a day, access to the FMS with HTTP on port 80 is no longer . The connection is pending with no response on the client browser. At the same time, the RTMP:80 and HTTP:8134 work fine.
It is quite disturbing, and he blocked for the moment of opening of our services because we want it available on HTTP:80.
Looks like FMS HTTP proxy stops working after a few hours. Someone knows why?
Kind regards
François - Paris, FR
It is a problem experienced in FMS 3.5 - other info are available here:
http://forums.Adobe.com/thread/445597
--
Paul
-
I need help regarding linksys rv042.
I have linksys rv042. I want to connect it to the netgear modem.
Modem will use ppoe and the router will use the static ip address from the ISP.
I try this scenario but unable to connect to the internet.
When I connect the modem directly to my pc the internet works
Or if I use the router as ppoe and modem as bridge it is fine.
Please help me.
I agree with gv and suggestion provided by him.
-
Hi all
I have deployed the new Linksys WAP4410N Wireless Access Point and it works fine. Laptop which is connected to the AP may be able to access the internet. It can communicate with AP and also the gateway IP (IP Router) but it is wireless devices are not able to communicate with each other. In the case of peripheral LAN can communicate with wireless devices. Cannot able to share files between wireless devices.
Please help me solve this problem. Wat could be the problem here. Stage of Wat I have to take to eliminate this problem.
Advance thanks.
Thank you and best regards,
Chandhuru.M
Hi, my name is Eric Moyers. I am a network Support Engineer in the Cisco Small Business Support Center. Please use the Forums to Post community of Cisco.
The title of security without thread/how do you have isolation set up wireless?
Insulation wireless (SSID) on the inside must be disabled to allow the computers associated with the same SSID to see and transfer files between them wireless
Thank you
Eric Moyers. : | :. : | :.
Cisco Small Business U.S. STAC Advanced Support Engineer
CCNA, CCNA-wireless
866-606-1866.
Mon - Fri 09:00 - 18:00 (UTC - 05:00)
* Please rate the Post so other will know when an answer has been found.
-
How to set up the ASDM/HTTP access for Cisco ASA firewall
Hi all
I am looking for a solution / guide that will allow our ASA 5510, V8.4 (5) Firewall, ASDM version 6.4 (9) to help users Active Directory. I want to activate our administrators to access the ASA via ASDM using their AD accounts (a local administrator account also exist but not a password of General knowledge)
Anyone would be abe to advise on a guide / Solution.
Thank you very much
If that you issue correctly you want active tpo AD authention for AMPS/HTTP access to the ASA. If it is correct that you have need of the following using the CLI to enable that command
ASA-32-22 (config) # aaa authentication http console?
set up the mode commands/options:
LOCAL server predefined Protocol AAA 'local' tag
Name WORD of RADIUS or GANYMEDE + aaa-server for the administrative group
authentication
After the console you needd to defind the name of the AD server you have configured on the SAA.
You can do the same thing by using ASDM:
Change LOCAL to the announcement that there are listed.
I hope that answers your question.
Thank you
Jeet Kumar
-
Need to change the ACE 4710 certificate that uses the https access management
I would change the certificate in Cisco ACE 4710 that uses for managing https access to the device. We always get the notice of security from the GUI because it uses a self signed certificate for access to the administration. Please suggest there is any mechanisam or availabel for the procedure to change the self signed SSL certificate?
Ranjith,
You can check this bug:
CSCte42757
Jorge
-
What configuration of VLAN requires a switch connectivity defined as an access port?
What configuration of VLAN requires a switch connectivity defined as an access port?
By external switch tagging
-
Help to set up the Linksys WRT54GH as Access Point
I would like to connect my WRT54GH to my main router with RJ45 (so I can get the signal full force) in order to be used as a point of access but I m not sure about the configuration. Can someone help me configure my WRT54GH?
Kind regards.
Manual.
Follow the instructions for 'LAN to LAN' Cascading in the link below:
In waterfall or connect a Linksys router to another router
Thing to keep in mind when cascading a router:
- Change the IP address of the secondary router to something like 192.168.1.254 so its on the same network, but is not in conflict with the main router
- Make sure that the DHCP service is disabled on the secondary router
- Make sure that nothing is ever connected to the Internet port on the secondary router
- Differentiate the wireless SSID by location (Ex: downstairs) and the channel
-
Linksys EA6900 - cannot access external hard drive USB USB1 of more
Linksys Firmware 1.1.42.161129 Ea6900
I had a Linksys EA6900 router for the last 6 months. I had 2 USB 3.0 4 TB drives Seagate external hard connected to the back of the router
USB1 - 4 TB Media
USB2 - 4 TB Backup
Things worked very well, but I got hurt in the last weeks, I can access is more than 4 to Media of USB1
I can connect two hard drives on my laptop Win 10 and access it fine, I scanned to find errors
I can put a USB2 hard drive and access it through the Linksys router.
I can't access one of them through USB1
BUT
I can plug other things on USB1 and access them very well
1. 8 GB USB drives ok
1 GB Transcend externak disc ok
3 TB Seagate harrdrive via a Dock HD ok
This logic, I can't work on where is the problem - it's the router or hard drives.
I restarted the router, no change
Ensure access to records: Off
FTP server: disabled
Media Server: on
Does anyone have ideas, what happens with USB1 port?
Hello. It's actually very weird. Given that you can't pinpointthe cause of the problem, I recommend that you reset, then reconfigure the router to try to solve this problem. Just be sure to save your settings. We'll see if it works.
Maybe you are looking for
-
Qosmio G20 Windvr 5 does not not used to close
My G20 came with XP Home SP2 and windvr 1 times open and when I clicked on setting it would not respond. She will not close (Ctrl/alt/del) end program will not work. Only a physical stop work. No help from Intervideo web site. Their site says OEM con
-
Disabling RDP to the server 2012 iPad
I Win Server 2012 Standard with gateway desktop remotely installed, configured and works perfectly. However, it seems that the security certificate is worthless for an iPad or Android user. I can successfully remote on the server and all workstations
-
CD will not play using a DVD player
Director of Windows After a musical slide show on cd it will play fine on my pc, however I cann t he can read on my dvd / tv player. I use Fuji-r discs. When you use the same disks to record music only files I have no trouble to play them on my dvd/t
-
the Dell Streak of UNLOCK will work in India (a foreign carrier)?
I want to order a Dell Streak (new cherry red 16GB unlocked with Android 2.2 for $399 from http://www.dell.com/us/p/mobile-streak/fs?3x_page=2&filterCollapsed=false) through a friend in the United States for my use in India. I got a mixed reaction i
-
Pack component 4.7 - Overview icon does not change
Hello I use Eclipse. Compilation with BB component pack 4.7. I have a master project (CLDC) and a second project (CDLC replacement Entry Point). The second project is checked system and startup. Note: the second entry point was to record a personali