Unable to save (disk quota exceeded) livestream

Similar Questions

• Unable to save the files to my device (Flash disk)

  Unable to save the files in my flash drive. It is given the message that it is complete, although it is not even half full. Furthermore, when I tried to eject, there will be a message that I have shuold close all files using even when there is none.

  Thank you

  First of all, I would like to make a backup of all the files somewhere safe. Just in case something goes wrong. I would like to make a copy of the files on the computer. Format the USB. Then copy the files over. If after a format, it still has the same problem or she leaves you nothing copy on then the memory stick may be dying on you and her is to buy another.

  Good luck

  Free Support Tools

• Unable to save the file in PSD - PS says that the file is over 2 GB when it's not

  I have a PSD that I worked on for many months. This week I got a new computer. When I open this file on my new computer, I'm unable to save as a PSD. The size of the file, in Windows Explorer, is 600 MB. Depending on the size of the PS CC Document displayed at the bottom of the Document window, the size of the document is 288.4 M / 1.77 G. Yet, when I try to save this file on my new computer, I get this error:

  Could not save it as "filename.psd" because the document is larger than 2 gigabytes.
  See Help topic "backup files" for more information.

  I do not understand how I worked on this document for several months and never had a problem with recording it, even now, on my new computer, it is impossible to save. My new computer has a secondary SSD hard drive that I use as the primary scratch disk. The new computer also has more RAM and a processor more. I had copied all my files from the old computer to the new preferences, and I do not see all of the settings are different between the two computers. Can someone please provide some guidance?

  (Note: I've been running PS CC x 32 because the x 64 version is not stable on my computer.)

  
  Size of the file as that displayed in the Windows Explorer: 600 941 KB.

  NEW: Document size such that displayed in the Document window: 288,4 M / 1.77 G
  OLD: Paper size such as displayed in the Document window: 288,4 M / 1.77 G

  NEW: Adobe Photoshop Version: 14.2 (14.2 20131211.r.515 2013/12 / 11:23:00:00) x 32
  OLD: Adobe Photoshop Version: 14.1.2 (14.1.2 20130923.r.427 2013/09 / 23:23:00:00) x 32

  NEW: operating system: Windows 7 64-bit
  OLD: Operating System: Windows 7 64-bit

  NEW: Version: 6.1 Service Pack 1
  OLD: Version: 6.1 Service Pack 1

  
  NEW: Physical processor count: 4
  OLD: Number of physical processor: 8

  NEW: The number of logical processors: 8

  NEW: Processor speed: 3591 MHz
  OLD: Processor speed: 2394 MHz

  NEW: Built-in memory: 32694 MB
  OLD: Built-in memory: 30718 MB

  NEW: Free memory: 25810 MB
  OLD: Free memory: 25633 MB

  NEW: Memory available to Photoshop: 3255 MB
  OLD: Memory available to Photoshop: 3255 MB

  NEW: The memory used by Photoshop: 60%
  OLD: The memory used by Photoshop: 69%

  NEW: Image tile size: 128K
  OLD: Image tile size: 128K

  NEW: Image cache levels: 6
  OLD: Image cache levels: 6

  NEW: Scratch or volumes:
  C:\, 930.2 G, 686,5 free G
  B:\, 111.8 G, 103.6 G free
  OLD: Scratch or volumes:
  C:\, 930.7 G, 567,1 free G

  Hello

  To ensure the follow-up to future readers who find this post, indeed it was a 14.2 bug fix which fell from Mindy file.

  14.1.2 and older versions of Photoshop, it was possible to save a document in PSD format which would not properly push the limit of 2 GB of formats (vector data stuck with the Max compatibility). We had a report of someone who inadvertently produced 300 + GB of files (http://forums.adobe.com/message/5666971#5666971). With 14.2, now make us some additional controls while recording and to issue warning limit file size. One of these controls is to the pixel dimensions of the data (the data of superior image then 30K pixels).

  Although MIndy file na not to exceed the 2 GB limit, it triggers the check of size of pixel data. There is a smart object layer that put across 6000%.

  So if you are getting 2 GB limit warning and didn't in previous versions, take a look at the scale of values on smart object layers and note the layers covering the area pixel values in the Info Panel and checking vector data (pasted from Illustrator guides).

  Kind regards

  Steve

• Error message on Windows XP, "Windows-Delayed Write failed, windows was unable to save all the data for the file.

  I use windows xp as the operating system. I bought the new 3G huawei data card. While surfing internet, between a pop-up is displayed

  «Windows-delayed write failed, windows was unable to save all data in the file C:\Documents and settings\new\Local Settings\Application Data\Google\Chrome\User Data\Default\Session Storage\004285.log.» The data has been lost. This error can be caused by a failure of your computer hardware.

  After this computer freezes and I have to restart my computer. Please help me how to fix this problem.

  The error basically says that he tried to write something on your hard drive and for some reason that unfinished write operation.  This could indicate a bad sector on your hard disk, damaged disk or a problem with your hardware.

  Whenever a problem involving a disk read or write appears, my first approach is to perform a verify operation of the disc to the hard drive.  Even if this is not your problem, it is a step of good routine maintenance. Run the disk check with the "/ R" or "Repair" option.  Note that the real disk check will be presented at the next reboot, will run until Windows loads completely, cannot be interrupted and can take more than a few hours to run depending on the size of your hard drive, the quantity and type found corruption and other factors.   It is better to perform during the night or when you won't need your computer for several hours.

  'How to perform disk in Windows XP error Cherking'

  <>http://support.Microsoft.com/kb/315265/en-us >

  HTH,

  JW

• Write delay failed unable to save all the data for the file $Mft

  Have a frustrating problem.  Help is greatly appreciated.  Learned the hard way and lost a dwg important issue which was unrecoverable.  Bought a new drive external hard seagate.  Could not back up the entire system with software pre-installed.  Download acronis true image home 2011.  Tried to backup system.  Receive error when trying to backup messages; 'Delay to failure of Scripture; Reading of the sector; Windows was unable to save all the data for the file $Mft. The data has been lost.  Have tried many fixes.  Unable to disable write caching method (grayed out / unclickable).  Played regedit 'EnableOplocks' is not listed to select.  Attempted to run microsoft 'fix it' and got the blue screen of death.  Short hair out of my head.  Suggestions appreciated.

  I don't know where Microsoft 'Technical support engineers' get their information.

  Write caching without a doubt "does apply to external hard drives", but it is usually disabled to prevent to sort the problem you are experiencing.

  I've seen several positions reporting to the same question that you do.  All of these positions were with SATA drives.  Is your Seagate eSATA drive?

  The disc is recognized as an external drive in Device Manager?  In Device Manager, go to the drive properties dialog box and click the policies tab.  An external drive should have two options: "Optimize for quick removal" and "Optimize for performance".  An internal hard drive shows the options as gray (with 'performance' selected), but there should also be a checkbox "Enable disk write cache" under the second option.

  What shows in your policies tab?

  If I understand correctly, "writeback" or "write behind" is implemented by disc material or its pilot.  If the option is not available on the drive properties > policies tab, I would suggest to contact Seagate support.

• I use a mac and when I try to save a file I get this message.   Unable to save the image.  Do not have enough access privileges. -5000

  I use a mac and when I try to save a file I get this message.   Unable to save the image.  Do not have enough access privileges. -5000

  local disk, I think he was trying to save it in the templates folder.  I changed it to save it on my counter top and it worked.  Rookie mistake.  This had to be the problem.

  Thank you

• PS CS6 unable to save png or jpg two errors

  Since the update I downloaded for PS CS6 yesterday, I was unable to save my file psd to png or jpg even with a single layer. Two error messages I get are "unable to save the file out of memory" and unable to save file "insert a drive and location here" because the file is not found. I have 4 drives every step still half full. Two 4 gig flash drives not even half full, the scratch disk is assigned to the least used drive.

  How do I roll back PS to its previous state?

  Joni

  It has no rollback option. You will need to run the creative cloud cleaning tool and reinstall. And savings directly to Flash drives isn't the best ideas first. The file IO might kill you. Your USB bus has only limited transfer rates...

  Mylenium

• Unable to "Save-as" of Adobe Photoshop for Sharepoint location

  Unable to "Save-as" of Adobe Photoshop for Sharepoint location

  I use Adobe Photoshop version CS4 11.0.2 on Windows XP SP3.

  I get the following error message when you try to "Save-as" of photoshop for Sahrepoint:

  "Could not save as: \\...\abc.jpg ' because of a disk error. »

  • I can save other Adobe documents at the same place without errors (Acrobat, Illustrator, etc.)
  • I can save Office documents in the same place without error (Excel, Word etc)
  • I can save docs Photoshop on my hard drive local - without error

  Once I saved the doc at my local, I can copy and paste into SharePoint (via Windows Explorer) without error.

  Is there a known issue with Adobe Photoshop for SharePoint backup?

  Steve

  This is the forum for Acrobat

  http://forums.Adobe.com/community/Photoshop

• QUOTA exceeded... even cannot delete

  Hello

  QUOTA exceeded in icloud reminders... tried to make space by deleting completed tasks, but still not the QUOTA EXCEEDED message, so I can not delete the

  See what - iCloud: limits for Contacts, calendars, reminders and bookmarks - Apple Support

• Unable to save the 'Release Date' field in iTunes/Windows 12.4.0.119

  Unable to save the 'Release Date' field in iTunes/Windows 12.4.0.119

  I've just updated to 12.4.0.119 and can no longer add Release Date for a TV show.  When I go to "Get Info" and type the release Date, it allows me to enter a valid date, but as soon as I have the label off the field it emerges by itself.  If I enter the date and click on 'Ok', the date is not recorded.

  I had this same problem Windows 10. Just tested it on iTunes/Mac 12.4.0.119 - this platform will not yet you allow to select the release Date field to make an entry.

  It is a major issue, as AppleTV allow no sorting replacing television programs other than by Release Date.

• Unable to save the Page as that received the error "ga.js could not be saved, because the source file could not be read." Try again later or contact the server administrator.

  Unable to save the Page as that received the error "... ga.js could not be saved, because the impossible source file read try again later, or contact the server administrator.

  You have installed the Ghostery add-on or something similar?
  It can block Google analytic and .js file could not be read.

• HP ENVY 4520 all-in-one: unable to save the new printer

  To register, the first thing required is a model #, & when I get mine, the answer comes back - 0 results found. I can go no further, until they recognize the printer they sold to me.

  Hi @elebit,

  Welcome to the HP Forums!

  I noticed that you are unable to save your new printer HP ENVY 4520. I am pleased to see that for you!

  Please, take a look at the Plug, for this printer. Who have the exact model number and try to save again.

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  I hope this helps!

• Unable to save my computer

  Unable to save my computer HP Pavilion a6600f desktop PC. Receive the recording service unavailable message. Running windows 7

  Stephen W. Yates

  This happened to me several times during the use of services from HP. Try again later.

• Unable to save the files on the desktop computer.

  After a restoration of the system, I am unable to save files on the desktop. Also, when I run that h & R Block software from my office, I get the following error

  "No permission to write to the directory. (see WinFileWriterImpl:open())

  No idea how I can fix this problem?

  Thanks in advance

  Why do you run the system restore?
  You had a problem before with saving files?

  You can save files to a folder on C:\?
  There are errors in the event viewer?

  Note

  To open Event Viewer: click on the Start button. In the search box, type and then event viewer from the list of results, double-click Event Viewer.

  Search in the application or system event logs and red error report.

  Thank you

  Marilyn

• Unable to save for their shares network users

  Our users currently unable to save anything for their network shares.  An error saying that they do not have permission.  But looking at the permissions on the share of each, they have all permissions.  And the permissions for the folder, they are all stored in allows users authenticated with all permissions as well.

  Recently, we moved all the data from one server to another.  We also use offline files and while looking into this problem before, it was mentioned that it might be a bad cache offline files or something.

  Hello

  I suggest you to send your request from the link and check.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads