Error message on Windows XP, "Windows-Delayed Write failed, windows was unable to save all the data for the file.

I use windows xp as the operating system. I bought the new 3G huawei data card. While surfing internet, between a pop-up is displayed

«Windows-delayed write failed, windows was unable to save all data in the file C:\Documents and settings\new\Local Settings\Application Data\Google\Chrome\User Data\Default\Session Storage\004285.log.» The data has been lost. This error can be caused by a failure of your computer hardware.

After this computer freezes and I have to restart my computer. Please help me how to fix this problem.

The error basically says that he tried to write something on your hard drive and for some reason that unfinished write operation.  This could indicate a bad sector on your hard disk, damaged disk or a problem with your hardware.

Whenever a problem involving a disk read or write appears, my first approach is to perform a verify operation of the disc to the hard drive.  Even if this is not your problem, it is a step of good routine maintenance. Run the disk check with the "/ R" or "Repair" option.  Note that the real disk check will be presented at the next reboot, will run until Windows loads completely, cannot be interrupted and can take more than a few hours to run depending on the size of your hard drive, the quantity and type found corruption and other factors.   It is better to perform during the night or when you won't need your computer for several hours.

'How to perform disk in Windows XP error Cherking'

<>http://support.Microsoft.com/kb/315265/en-us >

HTH,

JW

Tags: Windows

Similar Questions

  • Write delay failed unable to save all the data for the file $Mft

    Have a frustrating problem.  Help is greatly appreciated.  Learned the hard way and lost a dwg important issue which was unrecoverable.  Bought a new drive external hard seagate.  Could not back up the entire system with software pre-installed.  Download acronis true image home 2011.  Tried to backup system.  Receive error when trying to backup messages; 'Delay to failure of Scripture; Reading of the sector; Windows was unable to save all the data for the file $Mft. The data has been lost.  Have tried many fixes.  Unable to disable write caching method (grayed out / unclickable).  Played regedit 'EnableOplocks' is not listed to select.  Attempted to run microsoft 'fix it' and got the blue screen of death.  Short hair out of my head.  Suggestions appreciated.

    I don't know where Microsoft 'Technical support engineers' get their information.

    Write caching without a doubt "does apply to external hard drives", but it is usually disabled to prevent to sort the problem you are experiencing.

    I've seen several positions reporting to the same question that you do.  All of these positions were with SATA drives.  Is your Seagate eSATA drive?

    The disc is recognized as an external drive in Device Manager?  In Device Manager, go to the drive properties dialog box and click the policies tab.  An external drive should have two options: "Optimize for quick removal" and "Optimize for performance".  An internal hard drive shows the options as gray (with 'performance' selected), but there should also be a checkbox "Enable disk write cache" under the second option.

    What shows in your policies tab?

    If I understand correctly, "writeback" or "write behind" is implemented by disc material or its pilot.  If the option is not available on the drive properties > policies tab, I would suggest to contact Seagate support.

  • What burning CDs in Windows Media music system prepares all the files listed.

    What burning CDs in Windows Media music system prepares all the files listed.  When the system starts writing the files on the disc it gets through about 4 songs and then goes to finalize the disc and ejects the disc.  The disk does not appear to have anything on it.  Can I do anything locally to solve the problem?

    My system is XP.

    I burned the disc a lot in the past

    There has been no major changes to the system

    The files I am to burn to the disc are previously ripped files on the disk hard, some of them were burned on another drive before.

    I tried to slow down the burn speed, but that did not work.

    CD burning problem

    Hello

    • You receive an error message when burning CDs?
    • What were the changes made before the issue started?
    To resolve this problem, do one or more of the following and then try again:

    a. Verify that the CD burner is properly connected.

    b. clean the disc and verify that it is not damaged.

    c. try a different brand of blank discs.

    d. If another program is currently burning files on the CD, wait until the burning process is completed.

    e. Quit other programs that may be using the CD burner.

    f. restart Windows Media Player.

    g. restart your computer.

    h. use the Windows error-checking tool to find system errors of files with bad sectors on your hard drive. For more information about the error-checking tool, see Windows Help and Support.

    You can check: http://www.microsoft.com/windows/windowsmedia/player/webhelp/default.aspx?&mpver=11.0.5721.5145&id=C00D10DA&contextid=30&originalid=C00D0019

  • Error message: since Windows was first activated on this computer, the computer hardware has changed significantly.

    original title: reactivation

    I just got this message: since Windows was first activated on this computer, the computer hardware has changed significantly.  Because of these changes, Windows must be re-activated in 2 days.  You want to reactivate Windows?  No hardware changes have been for a few years.

    How to activate Windows XP
    http://support.Microsoft.com/kb/307890/en-us

    See the section titled: "how to activate Windows XP by phone.
    Also, make sure that you do not confuse the letters and numbers (number 8 for the)
    Letter B, etc.).

    How to contact a Microsoft Product Activation Center:
    http://support.Microsoft.com/default.aspx/KB/950929/en=us

    Microsoft Activation centers worldwide telephone numbers:
    http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
    (This site is for activating Volume License, but if you call, they will help you)

    The phone number is not working:
    Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

    Users of Windows XP - Genuine Advantage Notifications:
    http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
    (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

    J W Stuart: Http://www.pagestart.com

  • $MFT delay write failed. Please try to save this file elsewhere HOW DO THAT?

    I use a large external hard drive (USB) and received this error message after I unplugged the USB connector.  I found access secure USB eject as the player of not is when a user has clicked on the icon eject the device.   Of course, he was not sure to unplug the equipment for some reason any.  However, understood how to locate the reference file and save it elsewhere.

    Is this error repeating or was it just after the error that has occurred once you have made a withdrawal of "surprise" of the USB hard drive?  With a sudden removal, the file has probably been in the disk cache and it was not properly emptied to the disk, the file is lost.

    If this error occurs regularly, see here:

    You receive an error message when you save or move documents in Windows XP: "delayed write failed".

    John

  • Windows XP Office cannot receive all the files from my Windows 7 laptop.

    I have a desktop running WMP 11 on XP and a laptop computer under WMP 12 on Windows 7. Both are connected to the desktop computer even router-, mobile - wireless ethernet.
    Problem is my laptop can receive files that are shared in my office... but my office cannot receive all the files from my laptop, all two media sharing enabled and have all two disabled firewall.

    BTW, I've noticed that my office does not appear on my local network or all networks under "media streaming options" on my laptop...

    original title: the windows media player 12 does not share with WMP 11 (completely)

    Hello

    1 have had modifications made to your computer before the problem occurred?

    2. did you install or uninstall all the programs on your computer until the problem occurred?

    3. do you get an error message or error code when you access or file sharing on the network?

    4. what security (Antivirus & Firewall) program is installed on your computer?

    5. were you able to access shared files and folders on your laptop from your desktop earlier?

    I suggest you to follow a few troubleshooting steps and check if that help in the issue of the attachment on your computer.

    Method:

    Sharing files in Windows 7 and XP

    Sharing folders between two Windows 7 machines with the new homegroup feature is an easy process, but the homegroup feature is not compatible with Vista or XP.

    First of all, make sure that both computers are members of the same workgroup which by default is named Workgroup.

    a. on the Windows 7 machine go into control panel-all items in the control panel-network and sharing Center then click on change sharing settings, advanced.

    b. you want to check the following settings under Advanced for home or work and Public profile sharing settings.

    ·         Turn on network discovery.

    ·         Printer sharing and file.

    ·         Turn on sharing so anyone with network access can read write files in public folders.

     

    c. If you want any user to access public actions disable password protection.  It is located in the sharing settings advanced to the bottom of the list (protected by password sharing).

    ·         Turn off password protected sharing.

     

    d. If you want to keep it enabled, make sure that there is a newspaper account that the other XP machine and they have a password.

    e. over on your XP machine open my network places to search for the shared folder of Windows 7.

    f. double-click the shared folder to find a list of shared folders in the folder Public of Windows 7.  If you have password protection enabled you will have to type the user name and password of the user account on the windows 7 machine first.

    Check out the links below and check if this is useful:

    Networking of computers running different versions of Windows
    http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

    Sharing files and printers with different versions of Windows
    http://Windows.Microsoft.com/en-us/Windows7/help/sharing-files-and-printers-with-different-versions-of-Windows

    Hope this information helps you.

  • Receive an error message that Windows can not retrieve information about the disk when I try to put upgraded Windows XP to Windows 7.

    XP Home to Windows 7 upgrade Peoblems

    I can't update my laptop to windows 7, that he will enter the upgrade options, then it will say cannot retrieve information about this disk of computers. What should I do I deleted all leave them and still get this error. Thanks Chris

    It's a little late for this, but anytime you do an upgrade, you must be sure that your computer is compatible. My guess is your drive for windows 7 is a DVD and you have a CD or a witch of CD - RW drive can not read CD

    http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  • Error message "unable to save all the components of the file...". The file is damaged or unreadable.

    There are 22 of these error messages. Then a window 'System Fix' comes up with 4 big questions showing: 1) computer status 2) RAM memory) 3 system disk status and the system registry) 4. It lights continued to say that the reliability of RAM memory is very low, there is a critical error of hard disk, and the Windows operating system cannot detect a free space on the hard disk, hard drive error. Hard drive clusters are partially damaged, segment load failure.

    Hello

    1. when and where exactly you get this error message?

    2. don't you make recent changes?

    I suggest you to follow these steps and check if that helps:

    Method 1:
    Try to perform the clean boot and check if it helps:
    http://support.Microsoft.com/kb/310353

    NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

    Method 2:
    I suggest you try to run the System File Checker and see if it helps:
    http://support.Microsoft.com/kb/310747

    Method 3:
    Also I suggest to run the disk check and see if it helps:
    http://support.Microsoft.com/kb/315265

    It will be useful.

  • I get this error message when I try to burn CDs and I was burning CD frequently over the past 3 months. Please help me

    Windows Media Player encountered an error when burning. Check that the burner is connected properly and that the disc is clean and not damaged.

    the disks are clean, Ive tried over 10 different drafts and still the same error.

    Hello

    1 are there any changes or updates made on the computer?

    Method 1:
    You can open the CD / DVD, reading and burning convenience store.

    http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-and-burning-CDs-DVDs-and-BluRay-discs-Troubleshooter

    Method 2:
    You can take one or more of the following, and then try again:
    a. Verify that the CD burner is properly connected.
    b. clean the disc and verify that it is not damaged.
    c. try a different brand of blank discs.
    d. If another program is currently burning files on the CD, wait until the burning process is completed.
    e. Quit other programs that may be using the CD burner.
    f. restart Windows Media Player.
    g. restart your computer.
    h. Select a recording speed (write) more slow for the CD burner. See below the help link
    http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-burning-a-CD-or-DVD-in-Windows-Media-Player

    You can also visit these links for support and verification-
    http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player

    http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

    http://Windows.Microsoft.com/en-us/Windows7/disc-burning-frequently-asked-questions

  • A ball occasionally appears on the system tray which reads: "the preliminary version of Windows Vista will expire in 5 days. Save all the files... »

    Dell's tech found a virus on the computer that has been deleted. Thought that this solves the problem, but even after the virus has been removed, the message reappeared. It does not show every day, but sometimes and counting down the days of the expiration.

    What is the problem?

    Hi lugnuts.

    You experience this problem, because you have installed the beta version of Windows Vista Service pack 1 (SP1) on the computer.

    Before coming to the evaluation license expiry date, you must uninstall the Windows Vista SP1 update package.

    To uninstall Windows Vista SP1 update package, follow these steps:

    1. click on start and then click Control Panel.

    2. click on programs.

    3. click on programs and features.

    4. click on view installed updates.

    5. click on Service Pack for Microsoft Windows (KB936330).

    6. click on uninstall.

    Reference:

    You receive a message when you are running Windows Vista with a version beta of Service Pack 1: "your Windows license will expire.

    http://support.Microsoft.com/kb/954753

    For more information about how to uninstall Windows Vista Service Pack 1, click the number below to view the article in the Microsoft Knowledge Base:

    How to uninstall Windows Vista service packs as a troubleshooting step

    http://support.Microsoft.com/kb/948537/

    Once the beta of Windows Vista Service pack 1 (SP1) is uninstalled from the computer

    You can install the final version of windows vista service pack 1 on the computer

    How to obtain the latest Windows Vista service pack

    http://support.Microsoft.com/kb/935791

    What you need to know before you install Service Pack 1

    http://support.Microsoft.com/kb/936330

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • whenever I filled with adobe reader, I get an error message from windows about memory and then stop the adobe reader software

    I just downloaded adobe DC drive and when I go to fill out with the information it gives me an error about windows memory?  How can I fix it?

    NICOS, thank you very much for your answer.  I had to uninstall my adobe reader software and then reinstall adobe 10. Do not know why.  But he workerd yesterday.

    Clayton Chincio

  • For the last two weeks, I was unable to open all the emails that are in my Windows Live Hotmail folders.

    FOR THE LAST TWO WEEKS IVE HAS BEEN IMPOSSIBLE TO OPEN ANY EMAIL WHICH IS LOCATED IN ANY OF MY HOTMAIL FOLDERS. ALSO, I CAN NOT OPEN HOTMAIL WHICH IS IN THE AREA SENT, WHENEVER I TRY THE SERVER BRINGS BACK ME TO THE HOTMAIL INBOX.
    original title: I CANT ACCESS ANYTHING THAT HASBEN PLACE IN MY RECORDS or IN THE SENT BOX IT JUST FLIPS BACK to MY RECEIVING HOTMAIL Inbox

    Hello

    Given that the problem is related to hotmail, I suggest you to post the question in the forums and check them off below if it helps:
    http://windowslivehelp.com/solutions.aspx?ProductID=1

    It will be useful.

  • Delayed write failed - and now he cannot start Windows

    Help!

    I'm in big trouble! I was using my Tecra 9100 (running XP SP2) and was looking for some files I had stored on my memory stick. I selected "remove hardware" and pulled my memory stick out when I had finished. All of a sudden my cell phone begins to run slowly and an error message pops up saying "delayed write failed".

    This is a first for me, and I don't know why this has arisen. I read what he had to say less than the error: "Windows was unable to save all the data for the file \Kaspersky (don't remember the exact name, but it had to do with Kaspersky).» The data has been lost. This error can be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere. »

    My phone became so slow that it is insensitive (although I could move the cursor) and remained so for 10 minutes. I tried Ctrl-Alt-Delete, nothing happened. As I could ' t stop Windows, I had to hold the button for a few seconds to turn it off immediately. During the passage of my laptop, I noticed my bootscreen took about 15 sec more than before and the blue screen appeared saying "Windows needs check your disk for constincency."

    An hour or two later, I recorded in my computer and noticed my cursor was rather nervous and not as smooth as before. It was not right and about an hour or later the same error popped up again and my phone froze. After another power off, the blue screen showed again with the message "Windows needs to check your disk for constincency" and this time I waited about 4 hours!

    When he was finally done, my laptop restarts automatically and the blue screen appeared again! This time cancelled the disk check and when straigh to the login screen. I connected and noticed that the laptop was not aware that it was usually with the mouse still jumpy. I decided to restart the laptop only to display the blue screen again.

    I let go this time and just whereas scan. After that 20 minutes, nothing seemed be the case in the analysis so I turned off. Now, my computer is messed up seriuosly. When I switched back on it the screen that says at last know good configuration and boot into windows that normally presented themselves.

    Now, no matter what I select my laptop just restarts and says cannot take place due to a corrupted or damaged in \Windows\System file. You can attempt to repair this problem by inserting the Windows installation disc. "What is the Windows installation disc?

    My laptop is second hand and came with no recovery disks ect. and has already installed XP Pro so I don't drive. what the hell am I going?

    help will be very appreiciated. thanx.

    Hello

    There are only 2 possibilities:
    Buy a Toshiba restore CD and reinstall the entire system. Then all your data will be deleted.
    Or get a normal Windows CD to repair the system.
    Sorry, I don't have better news for you.

    Good bye

  • Windows delayed write failed

    When tranfering the files in my hard (backup) on my external hard drive I get the Error Message:, windows-delayed write failed.
    Windows was unable to save all the data for the file E:\$Mft. The data has been lost. This error can be caused by a failure of your computer hardware or network connection. Please try to save the foreign file.
    How can I solve this problem? Help, please!
    Thank you

    Please note that this type of errors involves usually the hard drive is a failure. Since hard drives are usually the main "mechanical"device, you must consider replacing."

  • Windows delayed write failed - Windows 2003

    Hi all

    Recently, my PC has met an unexpected stop down. When I restarted it, it is very slow, and a message appears saying:
    «Failed to write delayed Windows...» "Windows was unable to save all the data.
    Can you please help me in fixing this issue...?
    My setup is,
    Windows server 2003 R2 SP2 64-bit
    2 GB OF RAM...
    Thank you
    Kind regards
    Hasan Taylor

    Hi all

    Finally, I solved the problem after a CHKDSK to scheduling system... Now my PC is normal as before...
    Thanks for the reply Ms.Halima...
    Kind regards
    Hasan Taylor

Maybe you are looking for

  • Aspire V5 - 552G crashes, what's next?

    Hi, I was wondering if you could guide me in what I should do next. Recently, I decided to buy this laptop in August for College. http://www.Newegg.com/product/product.aspx?item=N82E16834314119 At first when I arrived it was very good and really work

  • Computer will not conduct the office and cannot enter the Bios.

    Original title: cannot get into the BIOS When I turn on the computer, the logon screen is shown with details of the computer.  The computer won't proceed beyond this point.  So I can't enter the BIOS when I press the DELETE key and there is no way th

  • Why our computer won't play video (youtube, for example)? all we get is a black and white screen.

    We have Windows7.  When you click on a YouTube link, the video does not play the computer.  It shows a white screen.  We have recently installed new software to print wirelessly on this computer.   Compaq laptop is on a computer.

  • IIS 7 error 403.6 on ads of the external pages not hosted on my computer.

    I started a server internal network only for basic web functionality and learn HTML and PHP, and others. But recently there have been getting blocked because of my servers LAN PC can access the server. Now sometimes ads appear with an error 403.6 ads

  • SX 20 12 X quality of presentation

    To the one who can help you. Currently, we have installed a system SX20 in 2 of our offices, headquarters and a branch. We currently have a WAN connection between the 2 offices with a 20 MB connection between two sites. Our branch has about 30 feet o