Unable to save for their shares network users

Similar Questions

• WLC with ACS 5.1 (RADIUS) for management * AND * Network users

  Hello

  I have authentication RADIUS of installation for the users of the network AND management on my NM - WLC (5.2 ongoing execution) against ACS 5.1

  My Question is:-

  For users to log in to Admin, I need to come back "Service-Type = Administrative - User" in order to make it work.

  Because the ACS sees all applications from the same device (WLC) for Admin and network users,

  the way I am currently treats it is by creating a filter based on the user name

  Thus, users that contain 'admin' in their ID, use a set of

  Network access policy authorization, who has an authorization associated with the attributes RADIUS profile.

  Normal users have a ' network access policy authorization different rule ", with a different profile.

  While this DOES WORK fine, still me I was wondering if there is a better way to do it, rather than create a rule

  based on the user name.

  I could use GANYMEDE + for the management, but I don't think that ACS allows the same client AAA (WLC) to use both protocols.

  Thank you

  I think it's something very common for things to do

  You may notice that ACS 5 comes preinstalled with a selection policy of service that differentiates them the Protocol-based queries and orders or service 'Access to the network by default' or "Default Device Admin" out of the box

  If you want only to RAY can either disable or delete the rule for applications of GANYMEDE + or not choose GANYMEDE + in the definitions of the unit

• Satellite A100-02 b PSAAR: trick to be able to save for the multi monitor users

  Hi, people

  I always use an external as extension of office monitor when I connect my Tosh to AC.
  And I just found out, when I plug it all and go truly mobile, the graphics card still provides a signal to the VGA Port for the then nonexistent extern monitor.

  On my Satellite A100-02 b (PSAAR) that consumes about 2 Watts, which means about 10% of the duration of battery life, which is about 20 minutes!
  So, if everyone did the same thing
  -Place a link on your desktop or startmenu to 'C:\Windows\System32\control.exe desk.cpl"to have quick access to the settings of the monitor
  -turn off the monitor 2
  - and enjoy longer battery life!

  It's on my Vista, I don't know how XP performs...
  Welcome, Matz

  Hello

  Thanks for the very useful info.
  I think it could be very useful for everyone who uses batteries very often.

  Good bye

• Automated save for web + user + Preset groups?

  I have a great templade PSD filled with web slices, each containing graphics web button.

  They are always saved in three States: "-stop ', '-on ' and '-active" in .png format.

  To speed things up, I've prepared:

  * 3 'layers' (which activates / turns off the layers on / off and adjusts the visibility/effects)

  * 3 "except for web settings" which adds the "-off ', '-on ', '-active" suffix etc.

  However, whenever I want to update these three sets (and is often)! I have to jump through hoops to make... application of layer comp + file > save for web + select "all user slices" and "preset" + confirm the crash.

  After a few hundred times it becomes boring :-)

  Bottomline: Is it possible to do an action, or even do it all in a single key?

  Robert K

  Assuming that you always follow your naming conventions, action should be able to cover all the bases. The only downside I see is that some actions wil lrequire to call through the menus, not the buttons quick toggle to be correctly recording wih names intact. Have you tried?

  Mylenium

• Unable to save pennies on network share

  A user has problems recording on a share network as follows:

  His iMac runs El Capitan. She opens a PDF of his email and stores them on the desktop. She manipulates using Adobe Acrobat and recorded on network. However, it is now to find that when she tries to do a save as on the network share, the button 'save' is grayed out. I tested with Microsoft Word as well, and the same problem occurs. Recently it started to happen.

  If she copy and glue the documents from his office on the network share then there is no problem, and I told him to do this as a workaround for now. It seems to be no problem with its access to the drive that it maps without problem and she can open and manipulate documents from there. As a test, I tried this on her personal network drive and again the "Save" button is grayed out.

  I suspect there is a simple resolution to this, but I was unable to reproduce the problem on my Mac Mini running El Capitan - I can't save slot for readers network without problem. I searched the forums but cannot see a solution.

  Someone at - it ideas?

  Solved.

• How to share program for all network users or domain?

  Hello
  I want to share the program for all the network or the user's domain, but I don't know how to do, if it is possible please help me please.

  Ask your domain administrator to place it in a shared folder, and then create a shortcut to each desktop.

• Cannot get Windows XP Home Edition for a mapped network drive / share on a computer of Windows 7 Pro 64-bit

  I constantly tried to use the "NET USE" syntax to get a Windows XP Home system to keep & share mapped network drive on a Windows 7 Pro 64-bit of the system and nothing I tried or worked on ANY blog. I can map the current network through made normal drive right click on 'My computer' and then provide a designation of drive letter with the correct path and have had great success using the function "connect using a different user name." However, even with the box checked to re-connect to the opening of the service is WORTHLESS! I made a lot of attempts to use the Net use syntax to create a batch file to overcome this non-functional raw application. I would really appreciate someone who actually had this issue resolved and work. I have looked at all the Windows files on the XP machine, searched the registry about a possible switch, which could make the necessary changes and have made all necessary changes on the Windows 7 system to accept the mapped network share. Help!

  Hello

  Since you have a network with different OS' I hope that Win 7 is configured to run on asnetwork work.

  If evry thing is configured properly it can be a problem of how your router keep information network. With the help of Staic DHCP or IP static on computers could help solve the problem.

  Just in case you need to reconfigure your network.

  ---------------

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall isactive .

  Since you have a network with Win 7 and the other version of Windows, you must configure Windows 7 as work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  * Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  -----------------------

  Jack MVP-networking. EZLAN.NET

• Try to share your old laptop (XP) ITunes library. Unable to save or download the latest version of ITunes successfully.

  Our ITunes library is on an old laptop running Windows XP. We want to stop using this computer and want to move the ITunes library to our new computer laptop. However, due to the age of the current laptop, we seem unable to ITunes backup properly, or to download the latest version of ITunes. Therefore, we cannot share the music. Tried to put music on our IPod, copying over to the new laptop, but that did not work or the other. We get an error on the source files. Any suggestion would be appreciated.

  You must download and install iTunes 12.1.3 - this is output from output of sequence that enables support of iOS 9 for XP and Vista users (but lack of music to Apple and other features added in 12.2/12.3, which requires Windows 7 or a later version).

  • iTunes 12.1.3.6 / XP or Vista 32 bit: iTunesSetup.exe

  If you simply want to transfer your iTunes library from your old computer to the new, you don't need iTunes to support it, unless you need consolidate the library as a preliminary step - see How to move your iTunes library to a new computer - Apple Support for more information.

• Error message on Windows XP, "Windows-Delayed Write failed, windows was unable to save all the data for the file.

  I use windows xp as the operating system. I bought the new 3G huawei data card. While surfing internet, between a pop-up is displayed

  «Windows-delayed write failed, windows was unable to save all data in the file C:\Documents and settings\new\Local Settings\Application Data\Google\Chrome\User Data\Default\Session Storage\004285.log.» The data has been lost. This error can be caused by a failure of your computer hardware.

  After this computer freezes and I have to restart my computer. Please help me how to fix this problem.

  The error basically says that he tried to write something on your hard drive and for some reason that unfinished write operation.  This could indicate a bad sector on your hard disk, damaged disk or a problem with your hardware.

  Whenever a problem involving a disk read or write appears, my first approach is to perform a verify operation of the disc to the hard drive.  Even if this is not your problem, it is a step of good routine maintenance. Run the disk check with the "/ R" or "Repair" option.  Note that the real disk check will be presented at the next reboot, will run until Windows loads completely, cannot be interrupted and can take more than a few hours to run depending on the size of your hard drive, the quantity and type found corruption and other factors.   It is better to perform during the night or when you won't need your computer for several hours.

  'How to perform disk in Windows XP error Cherking'

  <>http://support.Microsoft.com/kb/315265/en-us >

  HTH,

  JW

• Write delay failed unable to save all the data for the file $Mft

  Have a frustrating problem.  Help is greatly appreciated.  Learned the hard way and lost a dwg important issue which was unrecoverable.  Bought a new drive external hard seagate.  Could not back up the entire system with software pre-installed.  Download acronis true image home 2011.  Tried to backup system.  Receive error when trying to backup messages; 'Delay to failure of Scripture; Reading of the sector; Windows was unable to save all the data for the file $Mft. The data has been lost.  Have tried many fixes.  Unable to disable write caching method (grayed out / unclickable).  Played regedit 'EnableOplocks' is not listed to select.  Attempted to run microsoft 'fix it' and got the blue screen of death.  Short hair out of my head.  Suggestions appreciated.

  I don't know where Microsoft 'Technical support engineers' get their information.

  Write caching without a doubt "does apply to external hard drives", but it is usually disabled to prevent to sort the problem you are experiencing.

  I've seen several positions reporting to the same question that you do.  All of these positions were with SATA drives.  Is your Seagate eSATA drive?

  The disc is recognized as an external drive in Device Manager?  In Device Manager, go to the drive properties dialog box and click the policies tab.  An external drive should have two options: "Optimize for quick removal" and "Optimize for performance".  An internal hard drive shows the options as gray (with 'performance' selected), but there should also be a checkbox "Enable disk write cache" under the second option.

  What shows in your policies tab?

  If I understand correctly, "writeback" or "write behind" is implemented by disc material or its pilot.  If the option is not available on the drive properties > policies tab, I would suggest to contact Seagate support.

• Adobe Illustrator for error message "unable to save the picture. You do not have enough access privileges. "ID:-5000"

  Trying to save the illustrator on new Macbook pros and the system file gives me the Illustrator from Adobe to the error message "unable to save the picture. You do not have enough access privileges. ID:-5000 "... No idea what it is how to get a rise out of privileges?

  You are not allowed to write to the specified folder.

  CHEK your access privileges.

  Also: in case you save to a network: do not.

  Try to save in the Documents folder in your user folder. Then close the document and check what needs to be checked.

  If you need additional assistance, please we say system and version of Illustrator and where you want to save.

• Receive an error message on UID: uid without an owner for ImageFrame is unable to SAVE the FILE

  Receive an error message on UID: uid without an owner for ImageFrame is unable to SAVE the FILE

  Hello

  Could you please share your with us .muse file to study? Please send it to [email protected]. If your file is larger than 20 MB, you can use something like Adobe SendNow SendThisFile or Dropbox. Don't forget to mention the link to this forum thread in your email so that we can identify the file.

  Concerning

  Vivek

• Unable to save changes to the sounds. When registered and then double checked, change moved not. This applies specifically to sound for the navigation to start windows Explorer. I'm putting it to zero. »

  Unable to save changes to the sounds. When registered and then double checked, change moved not. This applies specifically to sound for the navigation to start windows Explorer. I'm putting it to zero.

  Unable to save changes to the sounds. When registered and then double checked, change moved not. This applies specifically to sound for the navigation to start windows Explorer. I'm putting it to zero.

  ====================================
  After making your change did you left click... Apply / OK?
  John Inzer - MS - MVP - digital media experience

• Update Windows 7 pro (10 users) network January 1, 2013. Now, for more than 4 users connect an access across the network apps stop apparently. Any thoughts?

  Update Windows 7 pro (10 users) network January 1, 2013.

  Now, for more than 4 users connect an access across the network apps stop apparently.

  Any thoughts?

  Hello

  Your question is beyond the scope of these forums. Please ask your question in the following forum.

  Windows 7 networking:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Concerning

• What "unmapped user access" for NFS share in Windows Server 2008 R2?

  In the beginning, I followed this Youtube video to set up an NFS share in Windows Server 2008 R2:

  https://www.YouTube.com/watch?v=BQ8Q_vsiksg

  Please note that the default option to allow to access Unix unmapped user is not changed (to about 1 min 57 sec).

  Then I found another article at http://www.vmwarearena.com/2012/07/create-nfs-datastore-for-esx-in-windows.html

  But in this article, I like to select allow anonymous access (instead of allow access Unix unmapped user).

  So who is correct?  Or both are correct (which means that this 'unmapped user access' is not serious)?

  And why should we have to allow root access (in the NFS share permissions dialog box)?  What a security risk?

  Thanks in advance.

  Have you tried to run through the steps taken from the blog of VMware?

  How to enable NFS on Windows 2008 and currently at ESX | Insider - Articles from VMware VMware support

  Also, there are 3 KB articles to know in case of potential problems

  1. http://kb.vmware.com/kb/1004490

  2. http://kb.vmware.com/kb/1003967

  3. http://technet.microsoft.com/en-us/library/cc753302 (WS.10) .aspx

  Noting in particular this section

  Share the folder of Windows for NFS

  To share the folder of Windows for NFS:

  1. Right click on the local folder you want to share via NFS.
  2. Click NFS share.
  3. Type the name for the share. For example, NFS-VMFS01.
  4. Delete to allow anonymous access.
  5. Click on permissions.
  6. Change the type of access in reading + writing and select allow root Access.