Unable to save files.

Similar Questions

• Unable to save file... "file name" as a file not found error when you try to save in Photoshop CC

  I am trying to create a new action in photoshop cc who takes a picture and replace the color and then saves it in a new file.  Once completed the action will convert the image in 21 files each a different color.  Ideally, I would like to save it as a jpg for each file and then the psd, but I got the error "file... cannot be saved to the file is not found" on the third file in.  I did some research and found that changing the psd to jpg could cause the problem, so I decided to create two different actions to achieve this.  In creating the action steps to create just the multi color of psd files, I got about 6 files in and got the same error.  After doing research a little more I found out that it might be my naming convention, so I've simplified that out of dashes, spaces, etc. and only could get 12 files in the next time, before I got the error.  So, I decided that I would split the colors in two series of different actions, but now I have this error each time even if just trying to apply to a single file and record do not.  Any idea on what's happened and how I can fix this problem?

  One recourse would be difficult to create for a bit as it for actions cannot use logic. It would be difficult for an action in the name of the output file.  However, an Action could use the name of the document as save 21 documents with the same document name in 21 different localities.

  You can also use a Script like image processor or one you can download Image Processor Pro as well as certain actions you create Doe you want. The script can do the thing in naming of file for you.

  You can also create a document with 21 colored layers and save out as a PSD file and the next action step could serves the layer export file script The Action may appoint the color channels as it creates, I'm not sure what the file names will be him are exported. I guess something like Doc Name the name of the layer. I have never use the script, I know right there for use.

  Edit that I just looked at the script it looks like you can not it batch because it has a dialog box and is not a Photoshop plug-in if recorded in batch Action script would be displayed the scripts dialog box and waiting for your interaction.

  

• Unable to save the files on the desktop computer.

  After a restoration of the system, I am unable to save files on the desktop. Also, when I run that h & R Block software from my office, I get the following error

  "No permission to write to the directory. (see WinFileWriterImpl:open())

  No idea how I can fix this problem?

  Thanks in advance

  Why do you run the system restore?
  You had a problem before with saving files?

  You can save files to a folder on C:\?
  There are errors in the event viewer?

  Note

  To open Event Viewer: click on the Start button. In the search box, type and then event viewer from the list of results, double-click Event Viewer.

  Search in the application or system event logs and red error report.

  Thank you

  Marilyn

• PS CS6 unable to save png or jpg two errors

  Since the update I downloaded for PS CS6 yesterday, I was unable to save my file psd to png or jpg even with a single layer. Two error messages I get are "unable to save the file out of memory" and unable to save file "insert a drive and location here" because the file is not found. I have 4 drives every step still half full. Two 4 gig flash drives not even half full, the scratch disk is assigned to the least used drive.

  How do I roll back PS to its previous state?

  Joni

  It has no rollback option. You will need to run the creative cloud cleaning tool and reinstall. And savings directly to Flash drives isn't the best ideas first. The file IO might kill you. Your USB bus has only limited transfer rates...

  Mylenium

• Unable to save the Page as that received the error "ga.js could not be saved, because the source file could not be read." Try again later or contact the server administrator.

  Unable to save the Page as that received the error "... ga.js could not be saved, because the impossible source file read try again later, or contact the server administrator.

  You have installed the Ghostery add-on or something similar?
  It can block Google analytic and .js file could not be read.

• Unable to scan and save files using Laserjet M1136

  Hello

  I've just installed and started using the M1136. While the printer and copy function work very well (a scanned doc immediately is printed), I am unable to scan and save a document on my system.

  Everything I read on the forums, I'm supposed to find a Director of HP /Scan To program/service that will help me to scan and save files, but I can't go to their source as well.

  Advice / help will be greatly appreciated!

  Hi M_Mand,

  Thank you for providing me with this information that you still can't find any software of HP on the computer.

  You can also scan using paint on your computer. Go to start, all programs, accessories, paint.

  I have provided with the URL of download and installation of the complete functionality for the printer software. This will allow you to browse the HP software.

  HP LaserJet Pro M1136 multifunctional printer drivers.

  Select your operating system, click Next and click on the software to download and install.

  If you have any questions or issues, feel free to ask.

  Thank you.

• Unable to save the files to my device (Flash disk)

  Unable to save the files in my flash drive. It is given the message that it is complete, although it is not even half full. Furthermore, when I tried to eject, there will be a message that I have shuold close all files using even when there is none.

  Thank you

  First of all, I would like to make a backup of all the files somewhere safe. Just in case something goes wrong. I would like to make a copy of the files on the computer. Format the USB. Then copy the files over. If after a format, it still has the same problem or she leaves you nothing copy on then the memory stick may be dying on you and her is to buy another.

  Good luck

  Free Support Tools

• Error message on Windows XP, "Windows-Delayed Write failed, windows was unable to save all the data for the file.

  I use windows xp as the operating system. I bought the new 3G huawei data card. While surfing internet, between a pop-up is displayed

  «Windows-delayed write failed, windows was unable to save all data in the file C:\Documents and settings\new\Local Settings\Application Data\Google\Chrome\User Data\Default\Session Storage\004285.log.» The data has been lost. This error can be caused by a failure of your computer hardware.

  After this computer freezes and I have to restart my computer. Please help me how to fix this problem.

  The error basically says that he tried to write something on your hard drive and for some reason that unfinished write operation.  This could indicate a bad sector on your hard disk, damaged disk or a problem with your hardware.

  Whenever a problem involving a disk read or write appears, my first approach is to perform a verify operation of the disc to the hard drive.  Even if this is not your problem, it is a step of good routine maintenance. Run the disk check with the "/ R" or "Repair" option.  Note that the real disk check will be presented at the next reboot, will run until Windows loads completely, cannot be interrupted and can take more than a few hours to run depending on the size of your hard drive, the quantity and type found corruption and other factors.   It is better to perform during the night or when you won't need your computer for several hours.

  'How to perform disk in Windows XP error Cherking'

  <>http://support.Microsoft.com/kb/315265/en-us >

  HTH,

  JW

• Write delay failed unable to save all the data for the file $Mft

  Have a frustrating problem.  Help is greatly appreciated.  Learned the hard way and lost a dwg important issue which was unrecoverable.  Bought a new drive external hard seagate.  Could not back up the entire system with software pre-installed.  Download acronis true image home 2011.  Tried to backup system.  Receive error when trying to backup messages; 'Delay to failure of Scripture; Reading of the sector; Windows was unable to save all the data for the file $Mft. The data has been lost.  Have tried many fixes.  Unable to disable write caching method (grayed out / unclickable).  Played regedit 'EnableOplocks' is not listed to select.  Attempted to run microsoft 'fix it' and got the blue screen of death.  Short hair out of my head.  Suggestions appreciated.

  I don't know where Microsoft 'Technical support engineers' get their information.

  Write caching without a doubt "does apply to external hard drives", but it is usually disabled to prevent to sort the problem you are experiencing.

  I've seen several positions reporting to the same question that you do.  All of these positions were with SATA drives.  Is your Seagate eSATA drive?

  The disc is recognized as an external drive in Device Manager?  In Device Manager, go to the drive properties dialog box and click the policies tab.  An external drive should have two options: "Optimize for quick removal" and "Optimize for performance".  An internal hard drive shows the options as gray (with 'performance' selected), but there should also be a checkbox "Enable disk write cache" under the second option.

  What shows in your policies tab?

  If I understand correctly, "writeback" or "write behind" is implemented by disc material or its pilot.  If the option is not available on the drive properties > policies tab, I would suggest to contact Seagate support.

• I'm unable to save all the files on my pc which runs with Vista Ultimate operating system

  I'm unable to save all the files in any application. The dialog box type of flickers in the background, but nothing happens.
  Happens if I am recording a chart on the web using a web browser. Happens when I create a file in Excel or Word, Paint, and Serif (possibly other applications which I am not using at the moment) and then click on "Save as."

  It happens if I opened a pdf file from any source (be it on my drive hard or on the web) and click on "Save as" to save another copy.

  It happens when I'm using a web-based e-mail service, and if I want to add an attachment, as soon as I click on the Upload button, nothing happens.

  It happens when I try to export a scanned image of my scanner, to a file.

  I get no error with the exception of this shimmering when one would expect to see a dialog box.

  But, it happens when I create a new file in Notepad, which is a weird exception

  It started to arrive 3 days ago, and I have not loaded any new software changed the settings I can think. (with the exception of mcAfee who has downloaded an update almost everyday)

  I restarted my computer several times since and searched the net to find answers, but it seems I'm the only one afflicted.

  I would appreciate if someone can shed some light on this.

  Thank you

  I ran scandisk and check sfc, but that did not help. Instead of trying a system restore, I tried the opposite: installed at every possible update available.
  Result: Problem solved!

  I installed 14 updates:
  KB974306
  KB976325
  KB905866
  KB943729
  KB960362
  KB969058
  KB971512
  KB971514
  KB972036
  KB975364
  KB976470
  KB933713
  KB971513
  and Windows Internet Explorer 8

• Unable to save the name of file in Notepad with * (asterisk)

  We are unable to save the name of file in Notepad with * (asterisk)... with this offer special symbol... why?

  I had to ask about the asterisk "" * "symbol..."

  The asterisk is also a special character that cannot be used in a file name or a folder.

• Sorry, unable to save your movie. Find missing files or delete the unusable items in your project and then try again. "Error: 0 x 87160129" during video editing in Windows Movie Maker/Windows Live Movie Maker

  I use the same device which was used to make movies in the past with no problems. The error message is sorry, unable to save your movie. Find missing files or delete the unusable items in your project and then try again. Error: 0 x 87160129

  I've never had any problems with this before and made more than 100 movies using WLMM or WMM. Thanks for any help. Would that my camera settings? I use a Lumix.

  I just found out what the problem is freakin ' and the solution. If the inserted videos have different "video codec" then it will not work!

  Before adding videos to Movie Maker, throw in a video converter and convert them all. (Even if the original format is WMV, convert again to WMV) that will ensure the output videos have the same codec!
  This solved the problem for me, hope, it does for you too...

• "Unable to save changes to permissions on the Image File Execution Options.

  Updating to Acrobat Reader, 1406 error reported; Cannot write the registry...

  Later, I found that updates for Office 2010 are starting to fail, some are bleow;

  Update of security for Microsoft Office 2010 (KB2553353) 32 - Bit Edition

  Update of security for Microsoft PowerPoint 2010 (KB2553185) 32 - Bit Edition

  Update of security for Microsoft Visio 2010 (KB2553374) 32 - Bit Edition

  After having read and carried out the instructions in the article by Acrobat; http://kb2.Adobe.com/CPS/329/329137.html#main_Vista and Win 7, has not solved the problem.

  Using Regedit, I found that I couldn't change permissions to one of the inputs of the sub in the execution for the Image File Option.  The error message "unable to save changes to permissions on the Image File Execution Options.

  Even in Safe Mode with administrator privileges, the message is the same.

  Have surfed the net for the solution, but none.

  Would appreciate advice.

  Concerning

  Prabir Mittra

  Malaysia

  Hello

  If the steps described in the adobe article cannot be implemented because of the error, then you need to contact adobe for assistance because they would be able to guide better.

  Also I suggest connect you to the computer as an administrator and check whether you can perform the steps completely mentioned in article from adobe.

  If you need assistance regarding the office updates, look for error messages related to updates Office failed in the history of Windows update and post it back here.

  Cordially.

• Adobe Reader DC Mac: Unable to save under. When selecting file / save as a blank browser screen appears

  Mac OS x, Adobe Reader DC:

  When you select file > save as, a blank browser window opens, leaving me unable to save pdf files.

  Hello

  Please try this: -.

  Acrobat > Preferences > General > under the basic tools to uncheck the option for "Show online storage while saving files" & "show online storage while opening files."

  Kind regards

  Christian

• I use a mac and when I try to save a file I get this message.   Unable to save the image.  Do not have enough access privileges. -5000

  I use a mac and when I try to save a file I get this message.   Unable to save the image.  Do not have enough access privileges. -5000

  local disk, I think he was trying to save it in the templates folder.  I changed it to save it on my counter top and it worked.  Rookie mistake.  This had to be the problem.

  Thank you