Unable to set the icon of my application

Similar Questions

• HP Envy 7640: Unable to set the scanning resolution

  Have been unable to set the resolution of scan during the scanning of the glass in a computer file (pdf, jpg). Guide the user to the HP page 47 7640 said: "● If you want to adjust the size of the scan, output type, scan resolution, or file type and so on, start scan from the software of the printer."
  ● To avoid all scanned text wrong or missing, make sure that the brightness is set properly the
  software.
  ● If you want to scan a document with several pages in a single file instead of several files, run it
  Scanner with the software of the printer instead of the sweep of the screen of the printer".

  First of all, where is the "printer software" to start the scan?

  Have tried all this. When I opened the series HP Envy 7640 (network): Assistant of HP printer, I click on "Scan the Document or Photo a" place in the scanning area. No scan dialog box never opens. Actually I tried to reinstall the printer driver. No change. Always impossible to get a scan dialog box. In addition, when I go in the start menu and the title of the series 7600 HP: HP envy, I click on the HP Scan icon. After a long wait, a dialog box appears that says: "Cannot communicate with Scanner", and it offers a few options. The first is to activate the device (printer), and then on; the second, control cables (its wireless operation); the third: try the software "fix." Happy to report that after stopping then on and running assistant printer again, this time by pressing the "scan a Photo Document' results in the appearance of a dialog box to make the changes that I've been looking for.

• Error 'nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll is not found"when you connect to the computer.

  Original title:

  Problem: I use DeLL Desktop.When I connect, these messages appear on my screen: nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll not found. Re-installing the application may fix the problem. Pls help. Thank you.

  Hello
  1. what version of Windows is installed on the computer?
  2. are you aware of any changes made to the computer, before the show?
  Assuming you have Windows Vista or Windows 7, follow the steps mentioned below.

  Method 1:
  

  Step 1: Perform a boot minimum troubleshooting and check which application reports this error
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: once you have determined the problem by using a clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

  Step 2: reinstall the application.
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Method 2:
  Run an analysis of auditor of system files on your computer and check for the issue.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  I hope this helps.

• Unable to set the transparency of the taskbar to laptop with windows 7.

  Original title: Please read my problem and give a solution as soon as possible.

  HII all... I'm unable to set the transparency of a taskbar for laptop with windows7 operating system? He demonstrated a tab to find out "trouble shoot problem and sero effects transparency" and shortly after clicking the laptop turns on the screen several times...

  Hi Mary,

  We need additional information to help you with the problem of transparency, please answer the following.

  1. which antivirus app do you use?

  2. do you use wired or wireless Internet?

  3. What is the brand and model of the computer?

  If the graphics card and driver were installed after that Windows 7 was first set up, depending on the manufacturer, you may need to update the computer performance index, which will automatically enable Aero. I suggest update you the display update driver and check the status of the issue.

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the problem still exists; Keep the computer in a clean boot, run the Aero Troubleshooter and check the status of the issue.

  Guided Help: the problems of Aero in Windows 7.

  http://support.Microsoft.com/kb/976170?WA=wsignin1.0

  I hope this helps.

• Unable to set the ip address of network client hosted after the creation of WIFI hotspot.

  Original title: PROBLEM CONNECTING WITH MY LAPTOP WIFI HOTSPOT INTERNET

  Hi all

  I am able to use the Internet to my hotspot of the Tower, when the source of the internet is Public or private wifi.

  so I know the cmd commands of window for hotspot and the client settings (sharing of customer hosted network, address assignment IP etc.,)

  but the problem I am facing is slightly different

  I use my datacard to cdma wireless broadband as my source internet connection(Reliance netconnect +)

  When I try to create for this hotspot, as usual I am able to create the hotspot and be able to share the internet for hostednework customer.

  but I am unable to set the ip address for the network hosted client, if I try to put 192.169.137.1 and 255.255.255.0 ip

  as soon as I close the window, the IP also disappears

  When connect my android phone to this hotspot, it is able to connect, but there is no internet connectivity.

  When I check the client for transmission of package hostednetwork every two envoys and received packet is past, I mean transmitting

  So what caused the rupture in internet connectivity but success hotspot connectivity?

  check the screenshots...

  can u help me...

  It's a bit complicated

  

  

  

  

  Hi Daniel,.

  Advanced networking issues are supported in the TechNet Forums. I suggest you send the request in the TechNet community.
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w8itpronetworking

  Hope this information helps.

• I can't upgrade to Photoshop CC 2014, I get a Setup error: DF024: unable to preserve the original file to "/ Applications / Adobe Photoshop 2014/Adobe Photoshop 2014.app/Contents/Frameworks/ICUConverter.framework/Versions/3.6/libicucnv.dylib.36.0 CC CC" (

  I can't upgrade to Photoshop CC 2014

  I get a Setup error: DF024: unable to preserve the original file to "/ Applications / Adobe Photoshop 2014/Adobe Photoshop 2014.app/Contents/Frameworks/ICUConverter.framework/Versions/3.6/libicucnv.dylib.36.0 CC CC" (Seq 1120)

  A chat session where an agent can remotely look inside your computer can help

  Cloud creative support chat (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• ORA-19510: unable to set the size of the blocks of file ' ' (blocksize =)

  I checked archivelog dest everything ok, power logs archived bit time, everything ok, I wondered what could cause this and how to solve this problem permanently.
  
  
  Log queue alerts
  Fri Jul 31 06:10:08 2009
  Errors in the /oracle/admin/gdwp/bdump/gdwp_arc0_1220702.trc file:
  ORA-19510: unable to set the size of the blocks of 74905 for the file ' / archive/gdwp/gdwp_1_18207_654896926.arc ' (blocksize = 512)
  ORA-27037: unable to get file status
  IBM AIX RISC System/6000 error: 2: no such file or directory
  Additional information: 9
  Fri Jul 31 06:10:08 2009
  Errors in the /oracle/admin/gdwp/bdump/gdwp_arc0_1220702.trc file:
  ORA-19510: unable to set the size of the blocks of 74905 for the file ' / archive/gdwp/gdwp_1_18207_654896926.arc ' (blocksize = 512)
  ORA-27037: unable to get file status
  IBM AIX RISC System/6000 error: 2: no such file or directory
  Additional information: 9
  Fri Jul 31 06:10:08 2009
  Arc0: Error 19510 closing log file archive ' / archive/gdwp/gdwp_1_18207_654896926.arc'
  ARCH: Stopped archiving, error occurred. Will continue to retry
  Fri Jul 31 06:10:08 2009
  ORACLE Instance gdwp - archive error
  Fri Jul 31 06:10:08 2009
  ORA-16038: log 1 # 18207 sequence can be archived
  ORA-19510: unable to set the size of the blocks of file ' ' (blocksize =)
  ORA-00312: thread 1 1 online journal: ' / db01/oradata/gdwp/redo01.log'
  Fri Jul 31 06:10:08 2009
  Errors in the /oracle/admin/gdwp/bdump/gdwp_arc0_1220702.trc file:
  ORA-16038: log 1 # 18207 sequence can be archived
  ORA-19510: unable to set the size of the blocks of file ' ' (blocksize =)
  ORA-00312: thread 1 1 online journal: ' / db01/oradata/gdwp/redo01.log'
  Fri Jul 31 06:10:11 2009
  ARCH: Stopped archiving, error occurred. Will continue to retry
  Fri Jul 31 06:10:11 2009
  ORACLE Instance gdwp - archive error
  Fri Jul 31 06:10:11 2009
  ORA-16014: log 1 sequence # 18207 not archived, no available destinations

  DBA2008 wrote:
  Notes 560204.1 suggest that to get rid of the generation of the trace file, is - it safe?

  I won't read the note at the moment but would surely say they told you to check the destination where the files are current. Did you do that? Raise a SR with OSS, to get their approval before doing something like what you try. Its you only who would face consequences, good or bad, no one else so better take a safe approach and the first approval of OSS.

  HTH
  Aman...

• How can I set the icon of the application?

  does anyone know why is not defined my application icon? I tried with a png and gif image and set the properties of recources of my project - icon of the application to this file.  I use eclipse with the backberry plugin.

  I found someone who said it should be 80 x 80 and that fixed it. Thank you!

• ApplicationIndicator the value across the icon on native applications

  Hi all

  I work in Bold and Storm with OS 4.6 and 4.7

  I have created an indicator of the Application that displays a value to his side. I set this value with the following line of code: ApplicationIndicatorRegistry.getInstance () .getApplicationIndicator () .setValue (5);

  The problem I have is that this value ("5") appears to the right of the icon of the indicator of demand and in all native applications, the value is displayed on the left of the icon.

  So, I want to display a value in the same way as native applications (left of the icon of the indicator of demand). How can I do? Is this possible?

  Thanks in advance for your help,

  Gabriela.

  The list of API messages does not allow an application to choose how many unread to appear on the side of the indicator image.

• Set the icon of the app for JDE 4.2.1.41

  Hello

  How to set the application icon in JDE 4.2.1.41? We already have an option in JDE 4.7.0.41 (project-> properties-> resources-> files of icons), but did not find such an option in JDE 4.2.1.41.  Please help me.

  Thank you

  -DK

  I was worked. ! I just added the following in the *.jdp file manually.

  [Icons
  ..\TestBB\src\com\test\img\test.png
  ]
  

  Thank you

  -DK

• Dynamically set the icon in a LinkButton

  I use several controls link as navigation devices button in my application.  When the LinkButton are created they are given all the four properties of the icon as follows:

  upIcon= "@Embed(source='images/Off_1.gif')"" "

  " icon = ' @Embed(source='images/Off_1.gif') "

  overIcon= "

  @Embed(source='images/Over_1.gif') "

  downIcon= "@Embed (source =" images/_1.gifsalt ' ")" " "

  The second LinkButton would have the same properties as stated except that it would have it's own set of GIF.  Because these are navigation buttons in my application I want to be able to click on a LinkButton and have is downIcon GIF became the icon GIF.  In this way, it seems that the button has slept selected and gives the end user a visual indication of where they are in the application.

  Problem is how to set the State of the icon of a LinkButton and make it show?  I tried this CODE but it did not work...  It does not generate an error... is there just no visual effect.

  LinkButton_1_ID. setStyle ('icon', 'images/Sel_1.gif');

  So if you have ideas on how to change the icon on a LinkButton please let me know.  Thank you in advance for your help!

  Have an ordinary day...

  KomputerMan ~ |  :-)

  You are probably better off just using a Button with custom skins. But if you do want to swap out the icon, you'll need to embed the asset as a Class:
  
  
  

• Unable to set the display resolution, Intel HD 4600 in Device Manager displays ' generic non-pnp monitor low resolution.

  I am slot as Windows 7 Pro on a Dell Intel 64 bit pc with a screen HD Dell I5 and Intel HD graphics 4600 driver.  PC woke up a few hours of inactivity, after no updates known to windows or other programs, with icons and pages double size beyond the limits of the monitor, setting the low resolution and Device Manager showing ' no generic pnp monitor low resolution ' instead of 'Monitor Dell HD' and no option to increase the resolution.  No help with reset, not restoration, disconnection and reconnection monitor auto plug n Play, 'Search new device', 'add a device', update of the graphics driver, reinstall the drivers from the Dell monitor.  Troubleshooting peripheral reported to date and working correctly.  After I finally uninstalled driver restarted, and graphic displays "default monitor" Device Manager (no longer "generic low resolution"), no graphics driver identified, but don't allow me to change to a higher resolution.  New windows had to be individually size / expanded to fill the screen.  This can be corrected?  I want to optimize my display settings for this monitor.  I have reinstall my graphics driver or just be happy that I can use my computer?  Thank you.

  Call Dell.  Your monitor should have a 3-year warranty.  Your matching OptiPlex with a warranty of one year more.

  Also, check all the hidden and invisible buttons on the monitor.  Someone may have inadvertently changed one of these.

• BlackBerry Smartphones unable to identify the icon

  Hello, this is my first post in this forum after hidden for a few months.

  After searching the forums, I am unable to identify an icon that appears at the top right of my screen.  It seems to appear mostly when I go into my Contacts (although I'm sure I saw it elsewhere, too).

  Two upside down triangles, right one slightly lower than the left, over a box or tray.  Can anyone put my mind at ease?  I looked in the manual supplied with the phone, and in these forums and can't find the answer.

  Either way, I love this phone!  I fell for the first time the other day (the last time!) and moved very quickly to retrieve it, looks like I dropped a baby!

  Thanks for your comments.

  * SOLVED -it seems to be the icon that is displayed when the Multitap is the active keyboard portrait.

  The upper right corner of your phone must have the network and the meter.  I think what you're talking about is when the phone is really looking for a signal stronger and I think he has those triangles with arrows pointing if I remember correctly.  Generally, your phone will be on 1XEV but occasionally as he's on 1 X and when he switches back, it's probably what you see.

• How to set the value of a * APPLICATION * with apex.server.process?

  If I have a page named point P1_MY_PAGE_ITEM, I could put its value in the session by doing this:

  $s('P1_MY_PAGE_ITEM', 'I Like Pie!');
  
  apex.server.process(   'dummy'
                         , { pageItems: "#P1_MY_PAGE_ITEM" }
                         , { dataType: "text",
                           async: false,
                             complete: function( ajaxResponse )
                                   {
                                        var ignoredReturn = ajaxResponse.responseText;
                                   }
                           });

  Which works very well. If you check the session, the P1_MY_PAGE_ITEM will now have the value: I like pie!

  However, if I have an Application element (not a page element!) named MY_APP_ITEM, how could I do the same thing? How can I use apex.server.process to set the value of MY_APP_ITEM in the session? I wouldn't be able to use "pageItems" because MY_APP_ITEM is not a page element, it is a part of the application.

  What is the correct syntax to do this?

  Thank you

  -Joe

  Hey Joe,

  Returning to that thread you made a couple of months ago, the answer is here:

  Post adjustment Application items in the apex.server.process for a * process application *.

  Defining a point of application is as easy as providing the name of the application element to p_arg_names Bay and set a corresponding value in the p_arg_values table.

  For example, in an application with article SOME_ITEM of the application, I can put the value as follows:

  (function(){
  var arrNames = [], arrValues = [];
  arrNames.push("SOME_ITEM");
  arrValues.push('some value');
  apex.server.process(   'dummy'
                       , { p_arg_names: arrNames, p_arg_values: arrValues }
                       , { dataType: "text"
                         });
  })()
  

  Any required application process. Should the item be free that you set it from the browser.

• Unable to set the anchor points of the path when the keyframes turned on...

  I have a layer of irregular shape who I am deformation over time (from smallest to largest). I am able to set the anchor points of the path to the forms I want, but once I put two keyframes for the path I'm interpolating a slide, I'm more able to set the anchor points for minor changes, for example, I am unable to draw the Bézier handles. If I disable keyframes, then I am allowed to adjust the anchor again, but that means I have to start whenever I need to make an adjustment. I have run successfully the concept but need to change several layers of form in this way, and not having is not access to the Bézier handles point of anchorage slows productivity.

  Any ideas?

  Thanks in advance,

  Chris

  12.2.1.5 AE

  Mac 10.9.4

  Sorry, I missed the rather obscure reference to an expression in the first post you. Had, I had to pay more attention I'd say disable the expression to change the path, and then select. Not being able to select a top with the marks of perfectly logical on expression because it is turned on with the full path is selected by the expression of all time. This is how work expressions. This seems to be a lot of trouble to go just to change the "timing" of a couple of keyframes.