Unable to set the security type.

Similar Questions

• HP Envy 7640: Unable to set the scanning resolution

  Have been unable to set the resolution of scan during the scanning of the glass in a computer file (pdf, jpg). Guide the user to the HP page 47 7640 said: "● If you want to adjust the size of the scan, output type, scan resolution, or file type and so on, start scan from the software of the printer."
  ● To avoid all scanned text wrong or missing, make sure that the brightness is set properly the
  software.
  ● If you want to scan a document with several pages in a single file instead of several files, run it
  Scanner with the software of the printer instead of the sweep of the screen of the printer".

  First of all, where is the "printer software" to start the scan?

  Have tried all this. When I opened the series HP Envy 7640 (network): Assistant of HP printer, I click on "Scan the Document or Photo a" place in the scanning area. No scan dialog box never opens. Actually I tried to reinstall the printer driver. No change. Always impossible to get a scan dialog box. In addition, when I go in the start menu and the title of the series 7600 HP: HP envy, I click on the HP Scan icon. After a long wait, a dialog box appears that says: "Cannot communicate with Scanner", and it offers a few options. The first is to activate the device (printer), and then on; the second, control cables (its wireless operation); the third: try the software "fix." Happy to report that after stopping then on and running assistant printer again, this time by pressing the "scan a Photo Document' results in the appearance of a dialog box to make the changes that I've been looking for.

• Unable to read the security descriptors data stream

  Whenever I start my computer runs CHKDSK - it says checking file system on E: and then he said that it should be checked for consistency. It works until stage 3 when he says 'impossible to read the security descriptors data stream' how to fix this?

  I tried chkdsk e:/r and it runs before step 3 when I get the "unable to read the security descriptors data stream" and it goes no further.

  I also tried fsutil dirty query e:- but it says something about a parameter incorrect and not if the volume is dirty or clean.

  Then I tried chkdsk e:/f/x - that always gives me the same mistake about it being an incorrect setting.

  As far as I know there is absolutely nothing on E:, I didn't even know that there was an additional drive. Right now I have it turned off so that I can use my computer. It seems to work fine without it. I read an article that said that if I can't fix e: with chkdsk which I have to do a low-level format of the reader? What's my next step? And I can do without the XP disc?

  The syntax

  fsutil dirty query e:

  is correct (except, of course, you try to use from the Recovery Console, where the fsutil command is not available).  Are you logged on as a user with administrative rights when you use fsutil?

  Similarly, the switches /f and/x are not available for chkdsk in the Recovery Console.

  See Recovery Console controls.

  Click on desktop then right-click on E: drive icon and select Properties.  What is indicated for:

  • File system
  • Space used
  • Free space
  • Capacity

  Now double click the icon for E: are shown files?  If not, click Tools > Folder Options > view and select the radio button "Show hidden files and folders" and uncheck "Hide protected files (recommended) operating system.  Now that you see all the files?

  Everything you read 'low level of shaped' is nonsense.  Any modern PC drive cannot be low level formatted by end users.  You can read this, but there is really no necessary even to "zero fill" your drive E: http://seagate.custkb.com/seagate/crm/selfservice/search.jsp?DocId=203931 (I have not checked to see if the WD tools rescuer has similar characteristics to SeaTools for DOS).

  If you are convinced that there is nothing of value on E (for example, installation of backup or restore), you can either format by right-clicking on the drive icon in my computer and selecting "format" or you can start disk management as described previously and use either in electronic format or delete the partition completely.  If you delete the partition, space becomes "unallocated".

  Because I guess C is your system drive (where Windows is), you may be able to use the diskpart tool to extend the partition F to use the unallocated space left if you decide to remove E well it's much easier (and safer) to do with disk management third-party tools such as Easeus Partition Manager free : http://www.partition-tool.com/personal.htm

• Unable to set the transparency of the taskbar to laptop with windows 7.

  Original title: Please read my problem and give a solution as soon as possible.

  HII all... I'm unable to set the transparency of a taskbar for laptop with windows7 operating system? He demonstrated a tab to find out "trouble shoot problem and sero effects transparency" and shortly after clicking the laptop turns on the screen several times...

  Hi Mary,

  We need additional information to help you with the problem of transparency, please answer the following.

  1. which antivirus app do you use?

  2. do you use wired or wireless Internet?

  3. What is the brand and model of the computer?

  If the graphics card and driver were installed after that Windows 7 was first set up, depending on the manufacturer, you may need to update the computer performance index, which will automatically enable Aero. I suggest update you the display update driver and check the status of the issue.

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the problem still exists; Keep the computer in a clean boot, run the Aero Troubleshooter and check the status of the issue.

  Guided Help: the problems of Aero in Windows 7.

  http://support.Microsoft.com/kb/976170?WA=wsignin1.0

  I hope this helps.

• Unable to set the ip address of network client hosted after the creation of WIFI hotspot.

  Original title: PROBLEM CONNECTING WITH MY LAPTOP WIFI HOTSPOT INTERNET

  Hi all

  I am able to use the Internet to my hotspot of the Tower, when the source of the internet is Public or private wifi.

  so I know the cmd commands of window for hotspot and the client settings (sharing of customer hosted network, address assignment IP etc.,)

  but the problem I am facing is slightly different

  I use my datacard to cdma wireless broadband as my source internet connection(Reliance netconnect +)

  When I try to create for this hotspot, as usual I am able to create the hotspot and be able to share the internet for hostednework customer.

  but I am unable to set the ip address for the network hosted client, if I try to put 192.169.137.1 and 255.255.255.0 ip

  as soon as I close the window, the IP also disappears

  When connect my android phone to this hotspot, it is able to connect, but there is no internet connectivity.

  When I check the client for transmission of package hostednetwork every two envoys and received packet is past, I mean transmitting

  So what caused the rupture in internet connectivity but success hotspot connectivity?

  check the screenshots...

  can u help me...

  It's a bit complicated

  

  

  

  

  Hi Daniel,.

  Advanced networking issues are supported in the TechNet Forums. I suggest you send the request in the TechNet community.
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w8itpronetworking

  Hope this information helps.

• SecurityException: JVM Shared, is not allowed to set the Security Manager

  When run another Applet Java and discoverer of opening I get the following error

  oracle.disco.DiscoApplet

  SecurityException: JVM Shared, is not allowed to set the Security Manager

  java.lang.SecurityException: JVM Shared, is not allowed to set the Security Manager

  at sun.plugin2.applet.SecurityManagerHelper.checkPermissionHelper (unknown Source)

  at sun.plugin2.applet.AWTAppletSecurityManager.checkPermission (unknown Source)

  at java.lang.System.setSecurityManager0 (unknown Source)

  to java.lang.System.setSecurityManager (unknown Source)

  at oracle.disco.DiscoSecurityManager.init (unknown Source)

  at oracle.disco.DiscoApplet.init (unknown Source)

  at com.sun.deploy.uitoolkit.impl.awt.AWTAppletAdapter.init (unknown Source)

  to sun.plugin2.applet.Plugin2Manager$ AppletExecutionRunnable.run (unknown Source)

  at java.lang.Thread.run (unknown Source)

  After clicking 'OK', the following red text shows in the window of discoverer with a small error icon

  "Error.  Click for more details"

  When I click it evokes the java console to show the above

  I use Windows 7 64-bit Java1.7_25

  I also have users who are experencing the same thing.

  Addition of

  our page basejpi.htm which is used to launch our applet forms seems to have solved this error for us.

• ORA-19510: unable to set the size of the blocks of file ' ' (blocksize =)

  I checked archivelog dest everything ok, power logs archived bit time, everything ok, I wondered what could cause this and how to solve this problem permanently.
  
  
  Log queue alerts
  Fri Jul 31 06:10:08 2009
  Errors in the /oracle/admin/gdwp/bdump/gdwp_arc0_1220702.trc file:
  ORA-19510: unable to set the size of the blocks of 74905 for the file ' / archive/gdwp/gdwp_1_18207_654896926.arc ' (blocksize = 512)
  ORA-27037: unable to get file status
  IBM AIX RISC System/6000 error: 2: no such file or directory
  Additional information: 9
  Fri Jul 31 06:10:08 2009
  Errors in the /oracle/admin/gdwp/bdump/gdwp_arc0_1220702.trc file:
  ORA-19510: unable to set the size of the blocks of 74905 for the file ' / archive/gdwp/gdwp_1_18207_654896926.arc ' (blocksize = 512)
  ORA-27037: unable to get file status
  IBM AIX RISC System/6000 error: 2: no such file or directory
  Additional information: 9
  Fri Jul 31 06:10:08 2009
  Arc0: Error 19510 closing log file archive ' / archive/gdwp/gdwp_1_18207_654896926.arc'
  ARCH: Stopped archiving, error occurred. Will continue to retry
  Fri Jul 31 06:10:08 2009
  ORACLE Instance gdwp - archive error
  Fri Jul 31 06:10:08 2009
  ORA-16038: log 1 # 18207 sequence can be archived
  ORA-19510: unable to set the size of the blocks of file ' ' (blocksize =)
  ORA-00312: thread 1 1 online journal: ' / db01/oradata/gdwp/redo01.log'
  Fri Jul 31 06:10:08 2009
  Errors in the /oracle/admin/gdwp/bdump/gdwp_arc0_1220702.trc file:
  ORA-16038: log 1 # 18207 sequence can be archived
  ORA-19510: unable to set the size of the blocks of file ' ' (blocksize =)
  ORA-00312: thread 1 1 online journal: ' / db01/oradata/gdwp/redo01.log'
  Fri Jul 31 06:10:11 2009
  ARCH: Stopped archiving, error occurred. Will continue to retry
  Fri Jul 31 06:10:11 2009
  ORACLE Instance gdwp - archive error
  Fri Jul 31 06:10:11 2009
  ORA-16014: log 1 sequence # 18207 not archived, no available destinations

  DBA2008 wrote:
  Notes 560204.1 suggest that to get rid of the generation of the trace file, is - it safe?

  I won't read the note at the moment but would surely say they told you to check the destination where the files are current. Did you do that? Raise a SR with OSS, to get their approval before doing something like what you try. Its you only who would face consequences, good or bad, no one else so better take a safe approach and the first approval of OSS.

  HTH
  Aman...

• the user's selection by setting the security filter in the ASO to unsort database

  We found a very annoying feature of Essbase: when we make the security filter setting in the ASO database through the console of Regional service, we found that the selection of the user list is not sorted. It is very very difficult to identify the appropriate user name to set the security filter.
  
  All the tips and tricks can improve the process?

  I don't think that this problem is related to ASO - filters are filters.

  All you need to do to sort the column filters is to change the filters, then click on the column heading "name of the filter. It sorts fine in the EE 9.3.1.

  Kind regards

  Cameron Lackpour

• Unable to set the image of the gallery as a backdrop

  Hi all

  I was able to open the Gallery to choose the picture, but was not able to set the selected as a background image.

  Whenever I pick a picture, the default image will set to white.

  Here is my code, can anyone know where goes wrong?

  Thanks in advance.

  Container {
  
              background: recipeBackground.imagePaint
  
              attachedObjects: [
                  ImagePaintDefinition {
                      id: recipeBackground
                      imageSource: "asset:///images/bg.jpg"
                      repeatPattern: RepeatPattern.XY
                  }
              ]
              Container {
                  layout: DockLayout {
  
                  }
                  opacity: 1.0
                  visible: true
                  horizontalAlignment: HorizontalAlignment.Center
                  background: Color.Transparent
                  leftPadding: 0.0
                  ImageView {
                      imageSource: "asset:///images/header.jpg"
                      preferredHeight: 150.0
                      opacity: 0.9
  
                  }
                  Container {
                      verticalAlignment: VerticalAlignment.Center
                      horizontalAlignment: HorizontalAlignment.Fill
  
                      layout: StackLayout {
                          orientation: LayoutOrientation.LeftToRight
  
                      }
                      leftPadding: 200.0
                      Label {
                          text: "Testing"
                          preferredHeight: 100.0
                          verticalAlignment: VerticalAlignment.Center
                          horizontalAlignment: HorizontalAlignment.Center
                          textStyle {
                              base: SystemDefaults.TextStyles.MediumText
                              color: Color.White
                          }
                      }
                      ImageButton {
                          verticalAlignment: VerticalAlignment.Top
                          horizontalAlignment: HorizontalAlignment.Left
                          leftMargin: 150.0
                          defaultImageSource: "asset:///images/Settings.png"
  
                          onClicked:{
                              picker.open()
  
                          }
  
                      }
  
                      attachedObjects: [
                          FilePicker {
                              id: picker
                              property string selectedFile
                              title: qsTr("File Picker")
                              mode: FilePickerMode.Picker
                              type: FileType.Picture
                              viewMode: FilePickerViewMode.GridView
                              onFileSelected: {
                                  selectedFile = selectedFiles[0]
                                  recipeBackground.imageSource = selectedFiles[0]
                              }
                          }
                      ]
  
                  }
              }
  

  Well it just add the permission to access_shared bar - descriptor.xml and it works!

• Unable to set the anchor points of the path when the keyframes turned on...

  I have a layer of irregular shape who I am deformation over time (from smallest to largest). I am able to set the anchor points of the path to the forms I want, but once I put two keyframes for the path I'm interpolating a slide, I'm more able to set the anchor points for minor changes, for example, I am unable to draw the Bézier handles. If I disable keyframes, then I am allowed to adjust the anchor again, but that means I have to start whenever I need to make an adjustment. I have run successfully the concept but need to change several layers of form in this way, and not having is not access to the Bézier handles point of anchorage slows productivity.

  Any ideas?

  Thanks in advance,

  Chris

  12.2.1.5 AE

  Mac 10.9.4

  Sorry, I missed the rather obscure reference to an expression in the first post you. Had, I had to pay more attention I'd say disable the expression to change the path, and then select. Not being able to select a top with the marks of perfectly logical on expression because it is turned on with the full path is selected by the expression of all time. This is how work expressions. This seems to be a lot of trouble to go just to change the "timing" of a couple of keyframes.

• How to set the date type date of work

  This is perhaps a silly question, but I can't seem to get the data type date to work for a member account. When I go to the planning application and choose an account I want to put in a date entry account, the web form seems to show that the setting of the date works for the account. I even put my account type to be saved hypothesis. For example, I expect to see the date formatted in 10/20/2009 when I enter this value in the web form under my account "Hire Date". I also checked the display options in the preferences of planning. If anyone knows if this function works even on 9.3 or 11.1?

  Hello

  Looks like you have not defined the order of evaluation of Auditors. Administration > Dimensions > evaluation order > select plan type > moving accounts to another window, apply.
  Try the form again.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Unable to set the paper size at all when using Firefox built-in PDF Viewer

  I use the built-in Firefox pdf viewer and it's fab.

  But if I try to print, I go to the preview before print and go through the layout and it is useless, because it assumes that my book is almost SQUARE, and the only options I have are portrait and landscape. I use A4 paper, like most of the British and European.

  Of course, I can't work around the preview before printing or that it ends up in the wrong settings by default.

  Adjust (default), it is only based on the width (if I set the margins to zero - it's okay), but lacks the lower half of the page because Firefox think my paper is the PLACE for a reason any.

  The only thing that works is to set the zoom to print at 60% and have tiny everthing, which is ridiculous.

  Any ideas? Is it possible to manually set the width and height of the paper?

  Thanks if anyone can help with this - my alternative is to use the Toshiba reader of PDF files, and it prints terribly to be unreadable. The print quality on Firefox is fine, if I could get to fit on paper...

  Hmm, in your screenshots, why mention the title bar of the window Yahoo mail? Is it an attachment that is somehow embedded in the message? If so, can you find a way to see it in its own tab? Sometimes with the right button > setting > Open Frame in a new tab will do, but I did not open Yahoo Mail to experiment.

• Tecra M7: Unable to set the screen resolution to 1680 x 1050 on external screen

  I have a M7 and a 1680 x 1050 VX2025 viewsonic monitor.
  I can't set the resolution for external display in clone mode or dual mode.
  Infact I can not get any resolution of the screen to exit the M7.

  I tried this in Windows XP and Vista with drivers from the toshiba Web site.

  Any ideas on how to force this resolution?

  Thank you

  Hello

  Are you sure that the graphics card supports this high resolution!
  If all goes well it s not a material limitation

  But especially if the display resolution is not available the graphics card driver does not support this resolution of the screen.
  In this case only the new driver installation and usage help

  What graphics card is installed on your laptop? Graphic chip Intel?
  If you use an Intel graphics card, then I recommend to visit the Intel page and search for a compatible driver on this page. Some users here in the forum said that the Intel drivers could help choose the preferred resolution.

• Unable to set the password in Active Directory 2008 R2 group policy

  We are trying to create a group policy that renames the built-in to our servers administrator account and change the password.  The strange thing is that when we create this Group Policy Computer Configuration > preferences > Control Panel Settings > local users and groups, the password section is grayed out.  We have a test domain, and this isn't a problem here.

  We tried to set the password with different accounts (domain administrator and other members of the Domain Admins group) and different machines (directly on my workstation and domain controller).  Here is a screenshot of what we see.  Any help would be greatly appreciated!

  

  I found the cause in MS14-025.

• Unable to set the contrast etc. in Windows Media Player 11...

  When playing a DVD in Windows Media Player 11, I can't set the contrast, brightness. The cursor jumps just to the Center. I use XP and Nvidia GeForce 210. Someone has any idea how to solve this problem? Thank you very much...

  Try to use the button on your monitor.