Unable to show the .mp4 videos

Similar Questions

• PS CS5 - will not import the MP4 video to layers

  I recently installed Photoshop CS5 on my Mac OS X because CC tends to run slowly.

  I use Photoshop primarily to make GIFs (Tumblr).

  However, when I try to import video frames to layers, video MP4 are grayed out. AVI videos are not, but the screen is blank when I try to import those, and the layers are black. The only way to "solve" this question is if I change the extension on a MP4 file to AVI. so I can import video frames to layers. But I don't want to have to do this for all of the videos that I want to use, and there must be a better solution.

  I have been through a lot of sons of people having the same problem, so a few quick things:

  • I have Quicktime installed and updated. This isn't the issue.
  • I have the extended version, not the issue or the other.
  • I went from 64 bit to 32 bit (because the import of video images on layers is apparently not possible at all on 64-bit), so this isn't the problem
  • Some people have said to change to "all file types", but as you can see in the screenshot as, I don't have this option

  

  Need help please, there must be a way to solve this problem

  There are two ways, but you'll find maybe easier to use Bridge > tools > rename batch to change the extension to .avi

  Perform tasks on the Tools menu, commands rename files and carpet auto HDR and panoramic images

  Here sample videos

  To download the sample videos / video model for use of the demo

  

  

  Another way would be to open the MP4 video in the use of photoshop cs5 file > open

  Then you can work in mode Timeline or convert images to Animation using the menu drop-down timeline

  Flatten the images in layers

  Make frames from layers

  Convert animation to image

• Dreamweaver - green line on the side of the MP4 videos, part 2

  The original discussion: Re: Dreamweaver - green line on the side of MP4 videos

  OK now I get disturbed (not the fault of you guys of course).

  I discovered that the green line is NOT on my videos, but is caused by the insertion of the video (via Insert-HTML-HTML5 video).

  Another method of insertion, the original route, I used in the old (Insert HTML plugin) version works better - does not cause the green line, but the line grey on the background remains.

  I don't want ALL the lines on the edges of my videos. (I like black open space, that I had, it's much more aesthetic and gives a full page less busy look).

  As you can see on other videos (approx) on the menu, what happened to the previous version of DW (defective if it was with El Capitan - it crashed or took a force - quit almost whenever I used it).   http://www.communicomics.com/eyemenu.html

  I am trying to edit these videos, and there seems to be no way to reintegrate those who are free to line to this new version.

  (This happens when I try to re - insert the same videos in this new version.) It is certainly something in this new version, which is the cause.)

  I am also changing the text, and apparently I can also no longer edit the text using the 'direct' either - the only way I found to do it is to make a code live/split screen and revise the text in the code section.

  I also miss the opportunity to make a convenient toggle of the widths of the table (I tried to create a new page, thinking that the green line can be caused by the table created in the previous version.

  (Maybe there is a simple way to edit live view that I'm missing?)

  But I'm trying to get this stuff finalized, and this new version is screwing things upward.

  I'll take the time to learn the Muse, but today, I need a quick way to work with what I have (and of course, when I do, there is no guarantee of Muse will not have the same question 'lines').

  I just want to be able to replace the videos with revision without the lines.

  If there is no work around for this, is it possible to have the old version of DW back so I can finish it without all this hassle?

  Please advise, my countdown has...

  Thanks again,

  Joe

  To get rid of the green line, make sure that your output video width is a multiple of 16.

  Short answer. With MPEG-2 and MPEG-4 (and other codecs DCT based), compression is applied to a grid of 16 x 16 pixel macroblocks. With MPEG - 4 Part 10 (h.264), multiple of 4 and 8 also works, but 16 is more effective.

  Nancy O.

• Self created title on the mp4 videos in Captivate 7

  How can I disable the title that is displayed automatically at the bottom of my mp4 created in Captivate 7? He shows for 3 seconds and then faints. There must be a way to disable.

  Thank you!

  To turn off, in the VLC Player, go to tools > Preferences > subtitles & OSD and clear the check box show the title of media at the beginning .

  If your query is resolved, please select the correct answer to mark it as resolved. This will help others facing a similar question.

  Anthony

• How can I properly import the .mp4 videos? (LR4 will not import some of them)

  Here's the question:

  I have original .mp4s that have been made either with my GoPro (1st generation) or with a video camera (I forgot what kind) and the present seem to matter very much but the .mp4s I really want to import are revised versions that have been edited in Corel Photostudio in 1080 p or 720 p .mp4 windows also indicates that they are .mp4 his .mp4 also says file extensions, but when I go to properties the edited videos look as if they are audio files, but they play fine in windows media player (and I can see the video content) regarding unpublished originals; same thing I can see/play them very well.

  I don't understand why LR4 can't import it? I tried to do a conversion; but the conversion in the same resolution, keep there tend to want to high range to expand video and more grainy converted/upgraded versions ARE unwearable too.

  Y at - it that a .mp4 format specific/codec LR4 will no accept? If yes what is it?

  If the problem is that the mp4 out of Corel, is possible that you are using a flavor of MP4 which is not supported by Lightroom? Are there options for export in h.264 or something else?

• Unable to show the details of audit of page html/OPS in the tables in the access to the tracking page. Technology of OFA stack does not come in the tables.

  Hello

  I activated followed Access Page follow the details of the verification of the users who have accessed HTML pages Web OFA as clients/suppliers, etc. in active Instance.I the profile option JTF_PF_MASTER_ENABLED to true to the level site and other configurations.

  But I can't get the Web pages of the OAF/HTML details AC two front and back end tables after execution of the Page access Tracking Data Migration Program.

  I am able to see the single FORM and VERIFICATION Tech batteries and unable to see the OFA technology stack.

  Help us please how do I get the Audit details OFA pages and what should I do?

  But in the Instance of Vision with the same configuration, I'm able to view the audit details OFA/HTML pages of front end and back end tables. In this case, I am able to view the OAF Tech stack.

  Could you let me know what is missing in the extraction of the OAF technology stack front end as well as put an end to the rear when I tried getting a test?

  Thank you

  Aren

  What is the value that is defined for the profile option, "JTF_PF_ENABLED" where the tracking does not work?

  Thank you

• Unable to show the custom workflow

  Hello world

  I use Jdeveloper with JDeveloper 11.1.1.8 extension 11.1.1.7 and Webceter Portal Builder 1.8.

  I created a workflow in Jdeveloper and deployed in WC_spaces server. I added the workflow to shared resources. When I try to access this workflow in my portal, I am unable to find the workflow.

  

  Any help...

  Thanks Vinay,

• Unable to show the Premiere Elements on my second monitor (attached to my laptop)

  No "playback settings" option is available under the project settings (which seems to be the way to solve this problem?) Any suggestions would be greatly appreciated. Thank you!

  laurelgr

  I just looked at what you call for your 12 items first on Windows 7 Professional.

  In my case, I used first elements 12 computer portable 64-bit Windows 8.1.

  Independent of first 12 elements, the control panel screen offered 4 choices

  1 duplicate these screens

  2. extend these screens

  3. show the office only on 1

  4 show the desktop only on 2

  There is no problem with "duplicate these screens" except Monitor 2 had full-screen contrast monitor 1. At this point, not adjustable. It was the case that Premiere Elements was involved or not involved. And, I do not see this choice as useful for the feature limited the first elements 12 function Menu/Dual Monitor window. You end up with each monitor showing the editing with no. Panel where to go.

  Now if you select extend these displays, this probably is more designed for the function of first elements dual monitor. You get two monitors, each mode display full screen. However, the 2A monitor only the taskbar at the bottom of the screen of the monitor. For more information about the function of dual monitor of Premiere Elements, please refer to the

  First Elements ATR troubleshooting: PE11: concerns Workflow bi-ecrans

  Please review and then we can discuss it further.

  If the feature you're looking for isn't here for you in the first 12 items, please do not forget to get your money in money of day 30 Adobe if you bought the product from Adobe.

  We will be watching for further developments.

  Thank you.

  RTA

• Unable to see the new video clips

  Told to download Silverlight, I downloaded nothing doesn't. I found that Silverlight does not, been abandoned. How to get the

  videos working again? Will there be a new download program to install?

  TThanks for any help I can get. I have Pavalon HP dm4 laptop 64 bit, windows 7 home preimmun.

  Hi r.Kennedy,.

  Silverlight is a plugin developed by Microsoft.

  I mentioned a link below to the microsoft site that allows you to download the silverlight plugin that allows to see interactive media on the web:

  http://www.Microsoft.com/getSilverlight/get-started/install/default.aspx

  I hope this helps.

  The link also has the system requirements for silverlight.

  Adobe does not develop or distribute the Silverlight plugin.

  If you have problems with the program, I advise you to please get in touch with Microsoft.

  Thank you

• MovieMaker in Windows does not import the mp4 videos.

  My OS is Windows xp.

  For use in Movie Maker the. MP4 files will have to
  be converted to the. Before importing WMV format.

  There are many programs that can do conversions...
  The following freeware is an example...:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup260.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First, you will need to decompress the file or just open the
  Drag FFSetup260.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• Recreate a link to the mp4 video when exporting the apk from CC animate?

  Hello, I have a problem with my video in a mini app that I have to do.

  I joined a video with the video import box and all this beautiful work on the debug (with Tablet android usb connected) mode and the preview.

  But when I publish on the APK, the video does not come with it, and the link is borken (I guess).

  It's just a simple menu with a Buton "Video game" entering a period where I put the video with the FLVplayback thing (video is a mp4 encoded with the android 720 p preset).

  I don't want any link flow online ect, I want just a local use.

  Then, how to properly export the package?

  If anyone can help...

  It didn't occur to me before, but you've entered in the publishing settings, general tab and video added to the list of included files?

• Unable to show the film in project

  When I have my project to open, I don't see the film on the left.  It is also visible in the window on the top menu.  However when I close my project and the screen is blank, I see the options of film and film - even if it is checked that it is grayed out for some reason any.

  No idea why I can't see the film in my open project?

  Thank you!!!

  Sandy

  Hello

  That is right.

  You cannot view the film in the file .cpvc (Captivate video composition) . Once you have recorded the video demo, then it will get automatically saved in the format .cpvc.

  You can publish the file .cpvc only as exit .mp4 and can insert as a video in the file .cptx , then you will see the film on the left side. Or you can also save a software simulation, which will come in the form of slides under the film in a .cptx file and you can also publish it as .mp4 output.

  Kind regards

  Ajit

• What code is needed to play the mp4 video in IE9

  I've been everywhere looking for a solution to this. I only get the references that talk about what the problems, issues, and what needs to be done, but does not provide the html code real that must be inserted to DW that will actually work in IE9.

  I place .mp4, .ogv, .webm code that works in Chrome, Apple, Android, and Firefox browsers but NO IE9. Can anyone help with this? It has been a very frustrating experience.

  Thank you!

  Jan

  Hello Jan,

  Here's some code that I used to insert a video mp4, loading an image:

  

  Width and height are your chhoice.

  Hans-Günter

• Unable to show the downloads in the downloads folder

  I bought and downloaded video clips. They are in the Firefox downloads folder. I can play them when the clips are downloaded, but after 24 hours, if I right click and try to open the folder containing, it is grayed out. I noticed that they are placed in my Temp folder on drive C when you first download. Once I've saved the file to the Temp on My Documents folder and returns to it and able to play. It occurs to me, I maybe made a fundamental error when download begins. I wonder if I want to play on Windows Media Viewer and there is also the alternative of a backup option. I assumed that all the downloaded files may be automatically saved in the file download Firefox. Should I have selected the button 'save' instead? There seems to be that no security no questions because the size and location of the file details always appear under the file name.

  If you choose to play the files as they are uploaded in the temp folder and can be deleted at any time.
  If you want to keep them then you must register first to another location before you play them or copy them to the temp folder.
  The latter may not work correctly if.

  You can also check:
  Video DownloadHelper: https://addons.mozilla.org/firefox/addon/3006
  Disconnect: https://addons.mozilla.org/firefox/addon/2254

• Unable to show the drives of 1 TB Fusion

  MacMini with Fusion of 1 TB drive. I don't see the SSD showing that I have only 120GB of storage. Can't see the 1 TB

  disc. This means that the 1 TB drive has failed?

  Where are you looking?

  Provide a screenshot of what you see.

  A fusion drive looks like this: