... Unable to solve link error

Similar Questions

• How to solve Link Error - incompatible type declarations projects to external symbol in the nidobj files

  After having included an implicit call to a dll, I created in LabVIEW, I get the error link next project, incompatible type declarations for external symbol '_TheActiveMeasurementPath' modules ' c:\Home\EChamberSystem\cvibuild. ECALsystem\EGunControlHandler.nidobj' and ' c:\Home\EChamberSystem\cvibuild. ECALsystem\AlarmsAndWarnings.nidobj'.

  What does that mean?

  After checking your function prototypes as Ray says, I just delete the directory cvibuild (under the directory of the project) which is where are all the niobj files and rebuild your project.  There is a rare combination of events where the compiler/linker CVI knows not to rebuild it.  If you remove the cvibuild directory, it will force you to completely rebuild.

• Unable to solve broken links

  Hello
  
  I have a long list of broken links in my project that I am unable to solve. I have tried 3 things:
  
  I ran the report of broken links, and the entry for each broken link says "lack of subject xyz.htm is referenced by the following:"However, the report does not list what refers the subject. "
  
  If I right click on a link that is broken (from the project tab) and select Show the topic links in the menu that appears, RoboHelp displays an icon for the item in the right pane. However, there are no links to the topic. And question mark icon is red instead of the typical blue.
  
  If I right click on a link that is broken (from the project tab) and select see references in the menu that appears, RoboHelp shows the window of the section references. This window lists the "missing section", but no mention of lists. When I click on the button restore, I get this error message: the file name is not valid. The character "#" cannot be used in a pathname.
  
  All of my missing items have the # in the name. For example,.
  
  some_topic.htm #IX_reporting
  
  I think that these 'missing subjects' were created when I import a word document into the project. Anyone have an idea how I can remove and resolve these links broken?
  
  Thank you!
  

  Thanks Peter. In fact, I didn't have to try both methods. The bonds broken is solved... as if by magic it seems. Perhaps, I closed and reopened the project enough times.

• Outlook and printers do not work and SFC error Windows Resource Protection found corrupt files but was unable to solve some of them.

  Separated from this thread.

  SFC all said above.

  Windows resource protection found corrupt files but was unable to solve some
  of them. Details are provided in convertible bonds. Journal windir\Logs\CBS\CBS.log.

  I was hoping that fixing the above might fix below.

  I had 2 problems.

  In outlook I have about 300 deleted messages from the deleted folder and when I entered the box and they were all there. I did it again and it happened again. Finally I did drag the files to the junk e-mail folder and not empty and they were gone and he seems to have stopped.

  The other problem is with the printer profiles. I changed routers and had to reinstall the printers.

  They appear ok in devices and printers, but when I go to print all old printers appear. They are not in the Control Panel, just new, but the drop down menu select printer boxes have many printers that are not active or working more. I would like to get rid of them.

  Thank you

  Harv

  SFC checks really just a list of some of the most important files (such as those required in order to activate the system at a very basic level), and generally what he is going to fix all that is at a "higher level." And Yes, it will almost always find one or two tiny little things but they are not significant failures, just a file with a version number of new or more than what's in the list.  Unless there is a symptom of a problem, probably best simply to ignore it.

  Just follow best practices: do not run as administrator for daily use, maintain and keep a backup (use a simple as automatic backup, Carbonite or store your files in OneDrive).

• Today I imported recently an android project in my workspace in eclipse android 4.2.2 then when I run the application it is show Eroor: unable to solve the target 'unknown target problem Android android-7 "tru."

  Eclipse SDK

  Version: 4.2.2
  Build id: M20130204-1200

  When I right click on the app and clcik as run as application Android Iam see following errors: -.

  The path location type Resource Description
  Is only permitted to line /tru system AndroidManifest.xml 20 problem with lint Android apps

  The path location type Resource Description
  Is only permitted to line /tru system AndroidManifest.xml 20 problem with lint Android apps

  The path location type Resource Description
  Unable to solve the target 'unknown target problem Android android-7 "tru."

   

  including AndroidManifest.xml is as below:

   

   

  
  http://schemas.Android.com/APK/RES/Android ".
  package = "com. Tru.
  Android: versionName = "3.47" android: versionCode = "073434" >

  
  

  
  Android: largeScreens = "true".
  Android: anyDensity = "true" / >
  
  
  
  
  
  Error: it is only allowed to the system applications
  
  

   

   

  A number of permissions of the Android app is not supported. The impact of these unsupported features varies.

  Visit this link and check the authorization of any authorized all in porting the app... If the permissions that your application requires in the right list you might need to make some changes in your application

  https://developer.BlackBerry.com/PlayBook/Android/apisupport/unsupportedapi_playbook_app_permissions...

• Link error: Undefined symbol '_profi_get_cntrl_info' referenced in 'main.c '.

  Hello.

  I am trying to solve my problem of error connecting for a few days, but I can't find the right answer. I have already searched the forum and read some threads with "undefined symbol link error", but they are not fitting to my problem.

  What I'm trying to do: I want to communicate with my Softing profibus card. I includes all the header files in my source code and also I have included both .lib for the project files. But the mentioned error will not leave.

  It is curiously when I choose "Go to definition" in the context menu, CVI is the good statement in the right header file.

  Who can help? What's wrong?

  Best regards

  der_Ben

  Hey,.

  one of the LIB provides this function, Yes.

  But now I got it. I checked the Options 'building' and change the 'default calling convention' to '__cdecl' (should be default) '__stdcall' and now everything works fine with this function.

  I would like to say thanks for your advice =)

  Concerning

  Ben

• Web service: unable to solve current dialog

  I'm testing a simple RESTful web service built with Labview.  I tried running the examples (address book, weather station).  When I get to the step of the deployment of the web service, I get the dialogue of conflict resolution with the useless message 'unable to solve current dialogue. "

  I thought maybe it was a problem with an incompatibilities (for example if the example was built for an earlier version of Labview).  I built my own very simple VI containing a single indicator.  I thought it was also a good idea to avoid shared variables.  I always get the same error dialog box when you try to deploy the application.

  I enclose my simple test project where this is useful.

  There is a known issue in LV 2011 with this string is empty. If this is the case, telling us that the Web of LabVIEW server is running, but the deployment Web Service LV is not. Not sure why this would be the case on your system. One thing you can look at to help refine, it's your Windows event logs.

  Assuming that Win7 or Vista--> in Run type eventvwr.msc.  This will shoot to the top of the event viewer. Select "application" in the Windows logs. You should see a bunch of caveats and erros in the dialog box.  Try to deploy your VI with the veiwer upwards and see if any new error are reported. The Source of the error should be LabVIEW, and I expect to see the error http 400 or 500.

  Apart from LV Dev Suite 2011, do you have something else installed on your system? Maybe an older version of LV? What OS are you on?

• Windows resource protection found corrupt files but was unable to solve some of them.

  I have several problems with my computer; I used to have Skype and I bought a new logitech camera, but since I installed it I can't update of java, adobe, yahoo, etc. so I uninstall my camera to see if it was the problem, but since I did that Skype has not worked agaain, an apears to error saying that there is a problem with the package windows install , I have read in this forum and find I had need windows install clean up utility so I downloaded, but did not work, when I used comand promp and scan my computer this apears

  Windows resource protection found corrupt files but was unable to solve some of them. Details can be found in CBS. Journal windir\logs\CBS\CBS.log. for example, C:\windows\Logs\CBS\CBS. Journal

  C:\windows\sistem 32 >

  can someone help me please! Thank you.

  HI Margaret,

  Thank you for your message.

  Looks like you have a virus or malware causing corruption.

  I suggest to update your Kaspersky Anti-virus definitions and run a full scan of the system.

  Also, make sure here's you have the Vista disc in the drive when you run SFC, where it gets the correct file information.

  Alternatively, you can try to perform a clean boot before you attempt to run SFC, to see if a startup program may conflict with it:

  http://support.Microsoft.com/kb/929135

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "unable to complete backup" error Code 0 x 80070002

  Original title:

  Error 0 x 80070002

  Windows 7 Home Premium Version

  Seagate external hard drive / software Acronis

  I am unable to complete my WIndows 7 Home Prem to backup on my Segate external drive.  63% in the backup, I get "unable to complete backup" error Code 0 x 80070002.  How can I get my support to end?

  Hello

  Welcome to the Microsoft Community Forums.

  From your post, it seems that the backup is not complete and give you an error code: 0 x 80070002.

  Quick questions:

  1. What is the full error message?

  2. how many profiles user is there is your computer?

  3. What Backup program do you use?

  This problem may occur if:

  Cause of scenario 1

  This problem occurs if you save a library that contains custom folders that are located under your user profile.

  Cause of scenario 2

  This problem occurs if the following conditions are met:

  ·         Backup Windows tries to back up files in folders LocalLow, Contacts and research.

  ·         These files are not present on your computer.

  Note These files are only created if certain applications are installed on the computer.

  Cause of scenario 3

  This problem occurs if the following conditions are met:

  ·         The computer has an NVIDIA USB EHCI Enhanced Host Controller Interface () chipset.

  ·         The computer has at least 4 GB of RAM.

  ·         You try to copy data from the computer to an external USB storage device.

  If you use the Windows backup program then please go and follow the methods mentioned below and later a update on the State of the question.

  Method 1: 0x8100002F error code and error code 0 x 80070002 when you back up files in Windows 7:http://support.microsoft.com/kb/979281

  Method 2: Try to run the check disk on the system using the link below.

  Check your hard drive for errors: http://windows.microsoft.com/en-US/windows7/Check-a-drive-for-errors

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Hope that it helps post back if you have questions about Windows and we will be happy to help you.

• Maintenance mode, unable to connect: 514 error connection to the instance of service pass vmds

  Hi all

  I do a few patches manually on ESX 4.0 host.  I forgot to get into maintenance mode, tried to patch and had an error on entering maintenance mode.  So I tried to get into the mode of maintenance with the following command:

  vimsh - n hostsvc/e/maintenance_mode_enter

  I get these messages:

  Current working directory: / root

  vmaCore: initSSL: make versionCheck = true

  handshake Timeout = 20000000

  Unable to connect: 514 error to connect to the instance of the service host-vmds

  Not connected

  Not connected

  Someone has ideas of what happens and how to solve?

  Thank you.

  Take a look at reboot on an ESX or ESXi Server management agents and VMware: hanging out on an ESX Server maintenance mode (9639912)

• My 5s iphone is updated to 9.3.1 now it showing an error while it controls for software update. Error is "cannot verify the update ' so please help me solve the error

  Please help me solve the error message

  Connect the phone to a computer running iTunes 12.3.3 or later, with a cable and try check update

• How to solve the error-1074396080 appeared in IMAQ Image color table

  Hello

  I'm above mentioned error.

  Here, I have attached my screenshot of the error.

  Could any one please guide me how to solve this error.

  I use kinect driver kinesthesia generating U24 Bit RGB Image and I want to convert it to Image IMAQ type, but I get an error mentioned.

  But when I do not use the acquisition of vision and vision assistant then every thing is good average is no any error which I have attached in annex 2.

  Please guide me how to solve this problem.

  Thank you very much.

  
  

• The linker error multiple symbol definitions

  Hello

  I brought a DAQmx project based on Linux to LabWindows CVI 2012 PXI. After completing all the requirements of the conversion and compile successfully, I'm getting tons of the following linker errors for different modules files (just stick

  a subset of these here):

  Several definitions of symbol '_PtrToPtr64' in modules X and Y

  Several definitions of symbol '_Ptr64ToPtr' in modules Z and Y

  Several definitions of symbol '_HandleToHandle64' in modules X and Y

  Several definitions for the "_HEAP_MAKE_TAG_FLAGS" symbol in the modules X and Y

  Several definitions for the symbol '_TpInitializeCallbackEnviron' in modules X and Y

  .....

  I found this message: http://forums.ni.com/t5/LabWindows-CVI/CVI2010-clang-link-errors-with-Windows-SDK/td-p/1425690

  that points to a known issue in CVI 2010. However workaround (allowing the C99 compilation option) is already defined in my project, so this solution does not apply.

  Any idea what could cause these symbols windows.h get redefined?

  Thank you

  Some of the Windows SDK functions, can have the same name as the functions of LabWIndows/CVI. Is your Windows.h file before all the other header files? See the following article for more information: http://digital.ni.com/public.nsf/websearch/69C82671913CAA4986256E9400676E17?OpenDocument

• Project link error: Undefined cadquã with TreeView macros

  Hello world

  I am facing a problem of "Link error - Undefined simbol project" with TreeView, TreeView_GetCheckState() and TreeView_GetCheckState() macros that I use in my project. When I compiled in 2009 it worked, but now that I have compiled for an update later in 2010, it does not work.

  Info on these macros in https://msdn.microsoft.com/en-us/library/windows/desktop/bb773810(v=vs.85).aspx

  These macros are supposed to be set in ComCtl32.lib. I think that since this is a WINAPI it is automatically included in the project, but I have this compilation error. I have included in my project by hand and I can see it now in my project tree, but the same error persists. I have the #include commctrl.h.

  Does anyone know what I am doing wrong that my project does not have these features?

  Hi again,

  I discovered that this macros are defined in CommCtrl.h and they are dependent on the _WIN32_IE, so I wrote in the /D_WIN32_IE of compiler options sets = 0 x 0500 and now the compiler take these macros into account and, therefore, the problem disappeared. For some reason, the value of _WIN32_IE isn't the same thing in my CVI2009 and CVI2010 compiler...

  #if (_WIN32_IE > = 0 x 0500)
  tvm_? etitemstate uses only the State and stateMask mask.
  Unicode or ansi is therefore irrelevant.
  #define TreeView_SetItemState (hwndTV, hti, data, _mask).
  {_Ms_TVi structure TVITEM; \}
  _ms_TVi.mask = TVIF_STATE; \
  _ms_TVi.hItem = (hti); \
  _ms_TVi.stateMask = (_mask); \
  _ms_TVi.State = (data); \
  SNDMSG ((hwndTV), TVM_SETITEM, 0, (LPARAM,)(TV_ITEM *) & _ms_TVi); \
  }

  #define TreeView_SetCheckState (hwndTV, hti, fCheck).
  TreeView_SetItemState (hwndTV, hti, INDEXTOSTATEIMAGEMASK ((fCheck)? 2:1), TVIS_STATEIMAGEMASK)

  #define TVM_GETITEMSTATE (+ 39 TV_FIRST)
  #define TreeView_GetItemState (hwndTV, hti, mask).
  (UINT) SNDMSG ((hwndTV), TVM_GETITEMSTATE, (WPARAM) (hti), (LPARAM) (mask))

  #define TreeView_GetCheckState (hwndTV, hti).
  ((((UINT) (SNDMSG ((hwndTV), TVM_GETITEMSTATE, (WPARAM) (hti), TVIS_STATEIMAGEMASK))) > 12) - 1).

  .....

• C Code NI-VISA linker error

  I wrote the following C command to place orders SCPI to Rohde & Schwarz FSL

  #define NIVISA_PXI
  #include
  #define MAX_CNT 200
  int main (void)
  {
  Status of ViStatus; / * For error checking * /.
  ViSession defaultRM, instr; / Communication channels * /.
  ViUInt32 retCount; / * Returns the number of I/O string * /.
  Bruno buffer [MAX_CNT]; / * Buffer for channel I/O * /.
  status = viOpenDefaultRM (& defaultRM);
  If (status<>
  Returns - 1;
  status = viWrite (instr, "* RST", 6, & retCount "");
  status = viClose (instr);
  status = viClose (defaultRM);
  return 0;
  }

  I get linker errors.   [Linker error] refers to 'viOpenDefaultRM@4' the undefined

  I used Bloodshed Dev C++. I have included the header files in the VXIPNP folder to include folder od Dev C++. He had 11 files.it had 4 header files visa.h, visatype.h, vpptype.h and rsfsp.h

  I have to install the header file and library? Please help, this is the first time I am using VISA. H

  Excuse my ignorance... but I've never worked with .dll in C++ can u explain how can I say my linker where is the file 'visa.dll '.

  Thnks