Unable to start process scheduler

Similar Questions

• Unable to start process manager Oracle OBIEE windows services

  Hello
  
  I have OBIEE 11 g installed on a 32-bit windows machine. The two windows services installed, I am unable to start the Oracle process manager. When I try to launch it I get the following error:
  Error 1053: The service did not demand launch or timely control.
  
  In the end, this service call the file opmn.exe which is located at MIDDLEWAREHOME\Oracle_BI1\opmn\bin. Trying to run this file is the error we get:
  The procedure entry point longjmp could not be located in the dynamic link library orauts.dll
  
  I tried to replace the orauts.dll file, but in vain.
  
  Please let me know if you have any idea about what needs to be done.
  
  Thank you
  Naman

  Hi Naman,

  Please delete. It is the cause of this problem. Make sure that you have only one way at Oracle.

  Rgds,
  DpKa

• Process scheduler doesn't start not

  Hello
  I am running 9.1 PeopleSoft HR, db Oracle 11.1.0.6, PT 8.50. The database, the application server and the web server are all on the same machine - Enterprise Linux 5.
  
  Basically, I have problems to start the server after an ip address change.
  I changed the system wide configuration ip - / etc/hosts, network ifcfg-eth0 script and so forth
  psappsrv.cfg has changed with the new corresponding, in charge of the tuxconfig edited ip address
  (also changed the configuration.properties for PIA)
  As far as the network is concerned, everything works fine - LAN and outdoor access.
  
  The database server and the Application starts ok. I can connect using sqlplus he-based and the Application Server starts without errors of psadmin.
  When I try to start the Scheduler process I get the following:
  

  Starting Process Scheduler Server PSUNX for Database HDEMO91 ...
  
  Booting all admin and server processes in /root/psft/pt/8.50/appserv/prcs/HDEMO91/PSTUXCFG
  INFO: Oracle Tuxedo, Version 10.3.0.0, 64-bit, Patch Level (none)
  
  Booting admin processes ...
  
  exec BBL -A :
       process id=5200 ... Started.
  
  Booting server processes ...
  
  exec PSMSTPRC -o ./LOGS/stdout -e ./LOGS/stderr -A -- -CD HDEMO91 -PS PSUNX -A start -S PSMSTPRC :
       process id=5201 ... Started.
  exec PSAESRV -o ./LOGS/stdout -e ./LOGS/stderr -- -CD HDEMO91 -S PSAESRV :
       process id=5221 ... Started.
  exec PSAESRV -o ./LOGS/stdout -e ./LOGS/stderr -- -CD HDEMO91 -S PSAESRV :
       process id=5229 ... Started.
  exec PSAESRV -o ./LOGS/stdout -e ./LOGS/stderr -- -CD HDEMO91 -S PSAESRV :
       process id=5237 ... Started.
  exec PSDSTSRV -o ./LOGS/stdout -e ./LOGS/stderr -p 1,600:1,1 -sPostReport -- -CD HDEMO91 -PS PSUNX -A start -S PSDSTSRV :
       CMDTUX_CAT:1685: ERROR: Application initialization failure
  
  tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error handler
  
  exec tmshutdown -y

  CRP / < domain >/LOGS/stderr:

  PSJNI: INFO: Unloaded the Java VM

  CRP / < domain >/LOGS/stdout:

  =================================Error===============================
   Message:  The FTP Address for transferring files to the Report Repository is not specified
  Please correct this error by updating the info for Report Node: ReportNode
  in the Process Scheduler Manager's Report Node Definition page.
  Due to this error, the Process Scheduler Server will not be started..
  Please correct this error prior to attempting to start the server PSUNX.
  =====================================================================

  Now, looking at the stdout, it seems that the solution may be a simple configuration change, but how do I access a report node page?
  
  I tried to start PIA just to see what would happen. I get the following message on the page of signon PS:

  CHECK APPSERVER LOGS. THE SITE BOOTED WITH INTERNAL DEFAULT SETTINGS, BECAUSE OF: bea.jolt.ServiceException: Invalid Session

  I'm a newbie at this and appreciate any input.
  Kind regards.

  Honza,

  Server Web fails to communicate with appserver. I guess that the port number you have given to the webserver configuration files (configuration.properties) is correct? Check psappsrv.cfg and match the port numbers.
  1. try changing IP address host name of the Web configuration.properties file server. Server Web Bounce (Restart) and appserver. If this does not
  2 recreating the field appserver and Web server with a different port number other than 9000. Make sure that the port numbers are not blocked

  -Vijay

• Cannot start the process scheduler

  
  Hello

  on F91SCM, 8.52 on Win 2008 DB Oracle 11.2.0.3 tools

  Application server starts end but cannot start Scheduler process with:

  tmboot: CMDTUX_CAT:827: ERROR: fatal error occurred; launch the user error handler

  tmshutdown - qy
  LIBTUX_CAT:250: ERROR: tpsvrinit() failed

  File: Error SQL Access ManagerSQL. Stmt #: 2 error Position: 0 return: 8097 - Oracle initialization error
  PSAESRV.2512 (0) [08: 18:24] (0) 23/10/13 server could not start

  It may be no database connection problem because AS runs with the same and databases of user originally of the same server. Since this is a DB refreshed, I deleted the data from PS_SERVERACTVTY, but did not help.

  Thanks for help.

  Please, make sure that you have installed the Oracle 32-bit client and it is the first channel in your app. variable PATH in the field of process scheduler configuration.

  Something in stderr/stdout files?

  Nicolas.

• Process scheduler start very slowly

  Hello
  Fscm90, tools 8.50 on Win 2003 Oracle 10 g DB
  PS takes about an hour to start:
  the journal of Tuxedo

  113150.MYSERVER!BBL.5624.2452.0: 10-29-2010: Tuxedo Version 10.3.0.0 with VS2005, 32-bit, Patch Level (none)
  113150.MYSERVER!BBL.5624.2452.0: LIBTUX_CAT:262: INFO: Standard main starting
  113152.MYSERVER!PSMSTPRC.7128.7648.-2: 10-29-2010: Tuxedo Version 10.3.0.0 with VS2005, 32-bit
  113152.MYSERVER!PSMSTPRC.7128.7648.-2: LIBTUX_CAT:262: INFO: Standard main starting
  113202.MYSERVER!PSDSTSRV.7844.2476.0: 10-29-2010: Tuxedo Version 10.3.0.0 with VS2005, 32-bit
  113202.MYSERVER!PSDSTSRV.7844.2476.0: LIBTUX_CAT:262: INFO: Standard main starting
  113206.MYSERVER!PSPRCSRV.628.6844.-2: 10-29-2010: Tuxedo Version 10.3.0.0 with VS2005, 32-bit
  113206.MYSERVER!PSPRCSRV.628.6844.-2: LIBTUX_CAT:262: INFO: Standard main starting
  124223.MYSERVER!PSMONITORSRV.2032.8068.-2: 10-29-2010: Tuxedo Version 10.3.0.0 with VS2005, 32-bit
  124223.MYSERVER!PSMONITORSRV.2032.8068.-2: LIBTUX_CAT:262: INFO: Standard main starting

  And:
  Pre log:

  PSPRCSRV.628 (0) [10/29/10 11:32:08 VP1@MYSERVER](0)    Log Fence is set to 3 = Display detailed message
  PSPRCSRV.628 (0) [10/29/10 11:32:08 VP1@MYSERVER](3) Validating Application Engine Server Setup....
  PSPRCSRV.628 (0) [10/29/10 11:32:08 VP1@MYSERVER](3)       Processes with Generic Process Type of Application Engine:
  PSPRCSRV.628 (0) [10/29/10 11:32:08 VP1@MYSERVER](3)                XML Publisher            :    3
  PSPRCSRV.628 (0) [10/29/10 11:32:08 VP1@MYSERVER](3)                Optimization Engine      :    2
  PSPRCSRV.628 (0) [10/29/10 11:32:08 VP1@MYSERVER](3)                Total:                        5
  PSPRCSRV.628 (0) [10/29/10 11:32:08 VP1@MYSERVER](3)    CPU Threshold Setting : 0  percent 
  PSPRCSRV.628 (0) [10/29/10 11:32:08 VP1@MYSERVER](3)    Memory Threshold Setting : 0 percent 
  PSPRCSRV.628 (0) [10/29/10 12:42:22 VP1@MYSERVER](3)   Process Scheduler Server PSNT running in remote mode
  PSPRCSRV.628 (0) [10/29/10 12:42:22 VP1@MYSERVER](3) Process Scheduler Server PSNT registered
  PSPRCSRV.628 (0) [10/29/10 12:42:22 VP1@MYSERVER](3)    Server action mode: Initializing
  PSPRCSRV.628 (0) [10/29/10 12:42:22 VP1@MYSERVER](2)   PSDaemon disabled
  PSPRCSRV.628 (0) [10/29/10 12:42:22 VP1@MYSERVER](3)    Checking Process cancels...
  PSPRCSRV.628 (0) [10/29/10 12:42:22 VP1@MYSERVER](0)    Server Initialization Complete
  PSPRCSRV.628 (0) [10/29/10 12:42:22 VP1@MYSERVER](0) Server started
  PSPRCSRV.628 (0) [10/29/10 12:42:37 VP1@MYSERVER](3)    Server: PSNT checking status...

  No problem on the database. No users connected still.
  Can not understand.
  
  Thanks for the help.

  You have multi-CRP and multi-appserver to the same application domains? Please, such us more info on your architecture: e.g. all in one box...

  Nicolas.

• Unable to start Scheduler: com/sap/conn/cjo/JCoException

  Hello
  
  I have installed the SAP employee Recon connector after installing my Planner was arrested and when I try to run the Scheduler I got the erorr:
  
  "Unable to start Scheduler: com/sap/conn/cjo/JCoException.
  
  
  I use OIM9.1; I downloaded the required jar "sapjco.jar" and "sapjcorfc.dll" dll files and "librfc32.dll" and placed in the document connector IOM folder.
  
  There is one thing, I can't save the file "sapjcorfc.dll", while the other has been saved successfully.
  
  Can someone help me to solve this problem...
  
  
  Concerning
  Alabhya Grondin

  You must use sapjco * 3 * .jar version 3.0 according to the manual. I ran this successfully using the same.

• Boot process Scheduler error

  People,

  Hello. I am running Oracle 11 g database 1 material with Oracle Linux 5 operating system.

  My Internet Architecture of PeopleSoft is WebLogic/Tuxedo/PeopleTools8.53.

  After that I started the application server with 8 process successfully, I start the process scheduler and get the error below:

  
  Starting process of the admin...

  exec BBL - one:
  CMDTUX_CAT:822: ERROR: No. BBL available, cannot start

  tmboot: warn: no available on the site linux.domain BBL.
  Will not attempt to start the process of the server on the site.

  
  tmboot: CMDTUX_CAT:827: ERROR: fatal error occurred; launch the user error handler

  exec tmshutdown - qy

  
  tmshutdown: internal error: CMDTUX_CAT:764: ERROR: unable to attach to BB

  
  tmboot: CMDTUX_CAT:828: ERROR: could not create the error process - fork() failed

  
  I checked the server log file current SCHDLR_0618.LOG and no message in it.

  I checked the current logfile Tuxedo TUXLOG and its content is below:

  
  Attempt to begin on field HRCS90
  105113.Linux.domain! tmadmin.8296.2885232272.-2: TMADMIN_CAT:1330: INFO: command: start - a
  105118.Linux.domain! BBL.8298.2841136176.0: 18/06/2014: Tuxedo 11.1.1.3.0, 64-bit Version, Patch level (none)
  105118.Linux.domain! BBL.8298.2841136176.0: LIBTUX_CAT:681: ERROR: failed to create the message queue
  105118.Linux.domain! BBL.8298.2841136176.0: LIBTUX_CAT:248: ERROR: function init System failure, Uunixerr =: msgget: no such file or directory
  105118.Linux.domain! BBL.8298.2841136176.0: CMDTUX_CAT:26: INFO: The BBL out of system
  105118.Linux.domain! tmboot.8297.3527355488.-2: 18/06/2014: Tuxedo, Version 11.1.1.3.0, 64-bit
  105118.Linux.domain! tmboot.8297.3527355488.-2: CMDTUX_CAT:825: ERROR: linux.domain BBL process failed with / t tperrno (TPEOS - operating system error)
  105118.Linux.domain! tmboot.8297.3527355488.-2: WARN: BBL No. available on the linux.domain site.
  Will not attempt to start the process of the server on the site.
  105126.Linux.domain! BBL.8304.4191628336.0: 18/06/2014: Tuxedo 11.1.1.3.0, 64-bit Version, Patch level (none)
  105126.Linux.domain! BBL.8304.4191628336.0: LIBTUX_CAT:334: ERROR: no BBL
  105126.Linux.domain! BBL.8304.4191628336.0: LIBTUX_CAT:248: ERROR: function init System failure, Uunixerr =
  105126.Linux.domain! tmboot.8303.4140594864.-2: 18/06/2014: Tuxedo, Version 11.1.1.3.0, 64-bit
  105126.Linux.domain! tmboot.8303.4140594864.-2: WARN: BBL No. available on the linux.domain site.
  Will not attempt to start the process of the server on the site.
  105126.Linux.domain! tmboot.8303.4140594864.-2: tmboot: CMDTUX_CAT:827: ERROR: fatal error occurred; launch the user error handler
  105126.Linux.domain! tmboot.8303.4140594864.-2: FATAL: CMDTUX_CAT:828: ERROR: could not create the error process - fork() failed

  105126.Linux.domain! PSADMIN.8274: Attempt to end on the HRCS90 field boot

  
  My question is:

  As you can see above, CMDTUX_CAT:825 might be the operating system error or the application has outbound server.

  Can any help folk to resolve boot process scheduler error?

  
  Thanks in advance.

  1. Please check and confirm that you have configured the kernel for enough shared memory segments and sizes.

  2. If you suspect does not connect to DB and then turn on tracing and see where this default.

  3. make sure that variable departure account and environment are configured correctly.

  4. assuming you start CRP on the same machine, I see a bit of conflict - u had started the thread with the process scheduler, but in your second response, application server is referenced.

  5. entire diary will help identify the problem instead of parts of it.

• Unable to start up normally, or any feature of safe mode

  I am unable to start up normally, and I'm unable to boot in safe mode functions.

  When it does not start normally, I get on the desktop with ICONS No. nor START BUTTON.

  I am operating Windows XP SP2 on a Dell Latitude D610 (Laptop).  "Cannot open Volume for Direct access.

  I need advice on that.  Help, please!

  We got a lot of insight.

  First, you need to get your work desk in order to have room for manoeuvre, then you can solve your problem of potential malware.

  What you describe is a situation where the process explorer.exe does not work (probably due to malware).  Think the explorer.exe process IS your desktop... then you must start it manually for now.  If it does not, you will have only wallpaper.

  Of your background image, press CTRL-ALT-DEL and open Task Manager.

  Look at the processes tab and if the process explorer.exe is not running, start it as follows:

  In Task Manager, click file, new task, and in the Open box, enter:

  %windir%\explorer.exe

  Click OK and see if get you your office.

  So if you are able to get into the Internet, follow these steps:

  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.

  Restart and see what things look like.

  That alone cannot resolve, but if all goes well with the deleted malware, then PaulAuckNZ can help to mop up any problems.

• This process scheduler tables to save before a refresh?

  We are on tools 8.53, FSCM 9.1 Windows 2008 R2 and SQL Server 2012

  We prepare update a database. The target has two balanced process shedulers load and the source has only one. We want to make sure that task scheduler process for the target configuration remains the same. We want to export tables into DM and then import them after the update.

  What would be the tables to export, so we can restore the exact configuration after the update?

  Hello

  Please check the mvprdexp.dms starting from the scripts folder and the Scheduler process table section. You should get all the table process scheduler.

  Thank you

• How to run SQRW outside the process scheduler

  Hi all

  on the 8.53 on Win 2008 Server, MSSQL DB server, tools how to run SQRW outside the process scheduler?

  Thank you.

  To run a QAS on the client:

  1. Select Start, run, click Browse and navigate to PS_HOME\bin\sqr\MSS\binw.

  Select sqrw.exe and click Open.

• Prevent other users to access my result of report of process scheduler

  I use a work (containing 1 SQR program) you use recurring to run every day at 01:00.
  
  What device is best to use to restrict users to take actions like (STOP or HOLD or CANCEL) that can affect my process waited for pace at 01:00 the next day?
  And how to configure to allow the latter ONLY and user_B to see my report? The rest should not see.
  
  Thank you

  The place to define what output users can see is defined in the process profile in the group box allows to process request
  See
  PeopleBooks > PeopleTools 8.52: PeopleSoft process scheduler > Annex: implementation of PeopleSoft process Scheduler security

  http://docs.Oracle.com/CD/E28394_01/pt852pbh1/Eng/psbooks/TPRs/IMG/sm_SecurityProcessProfilePermissionPage7a91_tprs7f4b.PNG

  + This section allows you to adjust the level of access rights with other users to view and update process queries that are started by users in a specific profile. Display and update rights can be changed of owner, all, or none. The default value allows process asks to be read by all and updated only by the owner. If you view by owner, no one else can view the status of the process in process monitor. Make the necessary changes to user rights. +

  I hope this helps.

  Halin

• Unable to start OID 11 g

  Hello world
  
  All of a sudden, I'm not able to start the instance of ODS including (OID and OVD). I see process OVD is up but not OID. DB and listeners are running.
  
  Quick thinking?
  
  Thank you

  Great!

  Yes, that is the question. Even though the message says it's about to expire, it is unable to start OID. The reason is, when the oidmon process tries to establish a connection to databased it provides that the status of 'success' of response. Oidmon process, all messages other than the 'success' are failure.

  Try below:

  1. stop all components with opmnctl.
  2 reset OID schema passwords and make their passwords ever point to exhale.
  3. start all components opmn.

  Thank you
  GK

• Process scheduler

  Hello
  
  I have created and configured the Scheduler process thanks to psadmin.exe and get the error when tried to start...
  
  -------------------------------------------
  Administration of PeopleSoft process scheduler
  -------------------------------------------
  
  (1) start a server process scheduler
  (2) stop a server process scheduler
  (3) set up a scheduler process server
  (4) create a scheduler process Server Configuration
  (5) remove a server process scheduler Configuration
  (6) to edit a process scheduler Configuration file
  (7) import an existing Configuration of the process scheduler
  (8) show the State of a server process scheduler
  (9) kill a bailiff Scheduler
  (10) clean the IPC resources in a domain of process scheduler
  
  (q) quit
  
  Command to run (1-10, q): 1
  
  
  List of database:
  
  (1) SC
  
  Select the item number to start: 1
  
  No subdirectory Archives creating...
  No psprcs.cfg in the subdirectory Archive, creating...
  
  
  The PeopleSoft ODBC and libraries of Crystal driver installation...
  PeopleSoft installed ODBC driver.
  
  
  
  NVision inscription...
  PeopleSoft nVision registered.
  
  
  From Planner bailiff referring to the HC database...
  All admin process is started and the server C:\PT8.49\appserv\prcs\HC\PSTUXCFG
  NEWS: BEA Tuxedo, 9.1, 32-bit Version, Patch level 036
  INFO: Serial number: 650522264137-2065448083901, Expiration ZERO, Maxusers 1000000
  NEWS: Licensed for: Oracle-Peoplesoft-ISV
  
  Starting process of the admin...
  
  exec BBL - one:
  process ID = 3280... Has begun.
  
  The server process starting...
  
  exec PSMSTPRC - A - psprcs.cfg - C - CD HC - PS PSNT-A begin if PSMSTPRC:
  CMDTUX_CAT:1685: ERROR: initialization of Application failed
  
  tmboot: CMDTUX_CAT:827: ERROR: fatal error occurred; launch user ha error
  ndler
  
  tmshutdown y
  Close all admin processes and Server C:\PT8.49\appserv\prcs\HC\PSTUXC
  FG
  
  Stopping the server process...
  
  
  Stopping admin process...
  
  ID of the server = 0 GID = VIPUL-187A83D08 Machine = VIPUL-187A83D08:
  stop succeeded
  1 interrupted process.
  
  
  Thanks in advance
  
  Vipul

  I guess I got it. The name of the comic was wrong. Now, I'm done with the installation. All work well.

  Kind regards
  Saty.

• I'm unable to start Firefox. To get the message that it is already running. Cannot find my profile using '% APPDATA%\Mozilla\Firefox\Profiles| '. What should I do

  I'm unable to start Firefox. To get the message that it is already running. Cannot find my profile using '% APPDATA%\Mozilla\Firefox\Profiles| '. Restarting my computer did not help. Because I had this problem I also noticed that all my favorites that I had copied in Windows Internet Explorer also disappeared. I use Firefox as my main search engine and usually do not use Internet Explorer. I am running Windows 7 on my machine.

  Try this add on the profile folder

• Unable to start after you run the product recovery disc

  Hello

  My laptop was a dual boot with windows XP SP3 and ubuntu

  1. He was infected by the virus and when I tried to clean it I removed the wrong file "services.exe", whereas windows does not work good there

  2. when I tried to uninstall the windows update, I get the error following error: 1068: the dependency service or group could not start

  3. so today, I found the toshiba recovery disks, I run and it commpleted, but now am not able to start my laptop.

  4. when I try to re - install windiws xp I got the error below "couln can't find NTLDR.

  Guys, your help will be much appreciated

  Hello

  > I run and it filled, but now am unable to start my laptop

  Are you sure that installation completed successfully? Looks like the damaged MBR or cannot be attributed