Unable to start the EMP - Java Web Application Server

Similar Questions

• LabView 2013 or 2014 Web Application Server does not start.

  I have a request that I built in 2013 of LabView that uses the Web application server OR. The application worked until end November 2014 when the Web in LabView 2013 application server has stopped working. Specifically, 2 and 1) NI NI Application Server Web services) Web Server system both were running, but I was unable to access web pages that I created earlier, or I could access the Configuration Web page OR localhost:3582. In addition, the button "Configure Web Application Server" under "Options/Web Server" is gray. Makes me think that web services NOR did not start successfully upward. Complete a repair facility OR to the LabView 2013 install did not help either.

  Since the opening of a service ticket with NEITHER, I've now deleted and reinstalled the 2013 LabView and LabView 2014 each with the latest patches. But the problem persists.

  The ticket OR for that matter now rests with RnD, so I'm tender hand to the community OR to see if anyone sees something similar? Or has any ideas to try?

  Some additional notes:

  (1) contrary to LabView LabView 2013 2014 no web services NOR would begin, based on a new for 2014 dependence on the Authentication Service of NOR. In 2014 this service does not either.

  (2) when I uninstall 2014 and re-install 2013, chess happens again (as above).

  (3) my system runs Win 7 Pro x 64 with 8 GB of RAM.

  (4) I have McAfee virus scanner/firewall. I have disabled and even uninstalled without correcting the problems.

  At this point any ideas to try would be greatly appreciated, because I can't wipe my OS and start over.

  Thank you

  * Update *.

  I finally found a solution to this problem. The solution is the following:

  1. Delete the two files "C:\ProgramData\National Instruments\NIAuth"
     • commitmark.1
     • Registry.bin
  2. Restart the OS and re-launching of LabView.

  On the next reboot, LabView recreates these two files and the Web services OR Windows services start normally. Once NI WebService which works normally.

  I'm assuming that one or both of these files has become corrupted at some point, that has kept the WebServices OR start properly. But as none of the services OR created an error event Windows for that matter, I stayed to search for the solution. And since the installer NOR has not remove or repair any of these files, the question continues to no matter how many times I have re-installed LabView on my system.

• Error 'nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll is not found"when you connect to the computer.

  Original title:

  Problem: I use DeLL Desktop.When I connect, these messages appear on my screen: nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll not found. Re-installing the application may fix the problem. Pls help. Thank you.

  Hello
  1. what version of Windows is installed on the computer?
  2. are you aware of any changes made to the computer, before the show?
  Assuming you have Windows Vista or Windows 7, follow the steps mentioned below.

  Method 1:
  

  Step 1: Perform a boot minimum troubleshooting and check which application reports this error
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: once you have determined the problem by using a clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

  Step 2: reinstall the application.
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Method 2:
  Run an analysis of auditor of system files on your computer and check for the issue.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  I hope this helps.

• EPM 11.1.2.3: deployment of java web applications on environment Mix Linux and windows

  Hi all

  I intend to install and configure EMP 11.1.2.3.

  We have 2 of linux and windows server 1.

  on linux, I am planning to install foundation, Essbase and planning.

  and in windows I intend to install HFM and FDMEE.

  now my question is when you perform the configuration for HFM and FDMEE, I need to deploy the java web application for HFM and FDMEE on windows.

  so everything by deploying web applications in java on windows that I put a different name for "domain name".

  as linux domain name will be 'EPMSystem', so for windows it would be different as 'EPMSystem1'.

  There will be no problem if the domain names are the same for both linux and windows?

  
  

  and for weblogic server port must be different as 7001 on linux and 7002 on HFM?
  

  
  

  Kind regards

  Dattatray Mate
  

  

  Yes, please keep another domain name...

  Port is not a problem, you can use the same port as well

  See you soon!

  SH! going

• Why is-Web application server on a target at a distance in real time is not start?

  Hi, I need help urgent please

  I was wondering why the Web application server on a target at a distance in real time is not start?

  The target is 9014 real-time and its connected to a local network abroad, I have a public IP address port forwarded to the local IP address of the device (Network Address Translation) with all open TCP/UDP ports. I can log on remotely over the internet using the public IP address to the device configuration page and change many settings. Whenever I have activate the Server Web applications and made port 8080, worth defaults to 0 after the reboot of the target.

  The admin login I use has all permissions to control the unit.

  For this reason, I have a problem, deploy web services remotely through the project after building it as it happens with the following error.

  "Web Services deployment failed. You must start the application Web server OR before you deploy a web service.

   

  I have attached a few screenshots

   

  Thanks for the help

  I had someone to plug his laptop to the same network as the cRIO, logmein used to connect remotely to the laptop, I had to download labview and the software needed for the cRIO in the computer, and then with the help of MAX, I reinstalled the software on the cRIO. The port of the web server application 8080 is now activated and I was able to deploy services web ok.

  I wonder why I can't use MAX distance to reinstall the software on the cRIO.

  The cRIO is installed on a private overseas network (192.x.x.x), then I have a public internet IP address (67.x.x.x) mapped to the private IP address of the cRIO (Network Address Translation). I can connect to the cRIO config page using the address 67.x.x.x, but not via MAX

  If I find target real tiem using the Ip address of 67.x.x.x, sometimes with the private static IP (192.x.x.x) located on the cRIO but it shows disconnected status

  I wonder if someone has an idea how to go about using MAX to reach the target in real time on the internet

  Thank you

• Unable to start the virtual machine after restoration

  Guests including Test host: ESXi 5.1.0.1065491

  Vm problem: 32-bit, Server 2003

  I use Veeam Backup & Restore 6.5 to back up my vm.  I always do a test restore to ensure that my backups are good.  I'm having a problem with a restore.  The 32-bit Server 2003 vm starts just fine on the main host it runs on.  All the vm are 64-bit except for one who is a 32-bit Server 2003 vm.  Restoring the machine virtual and implemented on a host except the 32-Bit vm Server 2003 test.  After restoration and trying power to the top, I get the following error:

  Unable to start the virtual machine.

  Turn on VPCM module has failed.

  Viewed performance counters require version 3 or greater of architectural performance monitoring.

  Anyone know if there is a fix for this problem?

  TIA,

  Mux

  I assume you are using different hardware (CPUs, the BIOS settings) for VMS restored!

  The virtual machine has VPCM enabled, which causes the problem. You can either disable it in vSphere Web Client (you can do this in the vSphere Client Windows), or directly modify the .vmx VM by setting vpmc.enable to "FALSE".

  For how toggle this setting in the Web Client see allow virtual in the Web Client vSphere CPU Performance counters. If you want to edit the .vmx file manually, you need to delete/re-add the VM from the inventory or recharge (see http://kb.vmware.com/kb/1026043)

  André

• Java web application UTF-8 encoding and mswin1252 Oracle database

  Hi all
  
  We need the following:
  
  Oracle Database 11 g Enterprise Edition Release 11.1.0.7.0 - 64 bit Production
  With partitioning, Oracle Label Security, OLAP, Data Mining,
  Oracle Database Vault and Real Application Testing options
  
  Developing on Jdeveloper 10.1.3.5 on WinXP Pro. Our production application servers are running on Windows 2003 10.1.3.4. I was using the jdbc libraries provided, but test now with the 11.1.0.7.0 drivers, downloaded from OTN.
  
  Database = WE8MSWIN1252 NLS_CHARACTERSET
  
  I guess our application servers are on WEMSWIN1252.
  
  Our application has to support french and English.
  
  We had problems with the unmapped characters (question mark reverse) in our database, and we suspect that these are special windows extended characters. Our java web application is set to the character set iso8859-1. We suspect that it is maybe the reason why some characters were is badly encoded in the comic book. Our application is built with struts 1.2.9.
  
  The page encoding UTF - 8 seems to be the standard for web applications. I changed our configuration of the struts controller to use UTF - 8. Using Jdeveloper OC4J local testing reveals that although the data extracted from makes it db correctly in the browser, registering with special characters is a problem.
  
  "Stéphane" recorded under "Sta © phane".
  
  I guess the question is here, mswin1252 is a single-byte coding scheme, but UTF - 8 is an encoding scheme of variable width and for some European characters, uses 2 bytes to represent. I think that's what I see here.
  
  Now it is, is it possible for us to use UTF - 8 in java application, but our database in MSWIN1252? I remember reading that the best practice is always to use a character set of superset in comics, as well as its subsets in customers. In our case, we also deal with both representations of variable width. I also remember reading that JDBC is based more on the nls_lang setting... can't jdbc do charset conversion?
  
  Thanks for the help

  Generally speaking, managers Oracle will do the conversion. I can't speak for the other executives, but whatever it is based on Java is expected to perform the conversion correctly.

  However, your colleague is right that it is strongly advised to have your database running with AL32UTF8 database character set. This is because when the application is configured for UTF - 8, you no longer control what characters people can conclude their browsers/clients. It is preferable to be able to store all the possible characters and no risk of data loss. In addition, any request must be fully compatible Unicode today ' today - including the backend.

  -Sergiusz

• Web application server - how to change the Port

  When installing LabVIEW, OR adds a process called "Application Web Server" (among a long list of other items) at startup.  It became an issue for our Windows users want to run our real application of Web server on their local computer.  My temporary work was about just disable the Web Application Server in the trunk to the port (8080) are available for other items.  My questions are the following:

  First of all, what kind of impact I look at developing LabVIEW programs?  This process is necessary if I want to work on the network applications?

  Second, it is possible to change the port number of the Web app server to avoid any problems that may exist?

  The Web Application Server is used by LabVIEW Web Services - only if you are not using/writing/developing LabVIEW Web Services, then it will not affect you.

  To change the port, open the Web-based Configuration utility NOR (normally on something like http://localhost:3582 /) and under "Web Server Configuration", you should see "Application Web Server" and you can select which port should be used.

  You can also access it Max by right click on "My System" and selecting "Web Configuration.

• Need help message' w/error Unable to start the s window media Interface. Make sure you have at least WMP10. »

  I downloaded WMP11 to download another program and I get this message ("unable to start the s window media Interface. Make sure you have at least WMP10. »).  This message appears when I click on the new program and it loads.  As soon as it loads the first program screen appears and displays this error message on WMP 10.  When I click ok it goes, but I can't get the new program to do anything.

  So before asking on the problem of new program, I would like to fix this so it keeps popping up.
  I'm not too calculates saavy so I need clarification.

  Thank you

  Where did you downloaded WMP 11?

  Uninstall WMP 11 and check again the issue. If it stops then reinstall WMP 11.

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=8163

• Bridge CC (64-bit) is unable to start the cache even after several time of virtue. Help! So frustrated!

  Bridge CC (64-bit) is unable to start the cache even after several time of virtue. Help! So frustrated!

  Hi julesmom,

  Please reset the Bridge preferences and then try it.

  Measures

  Start Adobe Bridge, and immediately press Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS down) until the dialogue box reset settings appears.

  Select all three options - reset preferences, reset Standard Workspaces and all miniature Purge Cache - and then click OK.

  Reference: troubleshooting errors, freezes | Adobe Bridge | Windows, Mac OS

  Let us know if it works.

  Kind regards

  ~ Mohit

• Product filters of the building with Web applications

  I'm currently building product in my catalog page filters, but I'm stumped as to how to do it.

  I had read that it must be done through the Web Apps, but I can't figure out how. From what I understand, I have to add each product to the Web application. That would be nice, but that would mean having to add each product twice, once to the Web application and once to the product database? Is this fair?

  The filter options, I need is a drop down menu for product scale, a scroll of the brands of products checklist, a slider for product prices and list the product color.

  It seems very little information with practical examples on the operation of Web applications and how to create them.

  

  OK, you're on the right track. A few note however:

  1. replace:

  {module_data resource="products" version="v3" fields="custom3" skip="0" limit="10" where="\{'custom2':'1:10'\}" order="id" collection="myData"}
  

  with

  {module_data resource="products" version="v3" fields="custom2, name" skip="0" limit="10" where="\{'custom2':'{{globals.get.scale}}'\}" order="id" collection="myData"}
  

  This way module_data will get the real value of the query in the URL param, so mysite.com? scale scale1 = and mysite.com? scale scale2 = will make things different.

  When generating the snippet module_data do not forget to include all the fields you will use, including the product name, custom fields, the URL and so on. module_data returns only the fields that you specify.

  API calls can be used in the front-end servers, you need not the snippet ajax for this application.

  I highly recommend passing by the messages filtered by the author and tag -even if it's on blogs, the approach is similar to what you need, the only difference is the resource module_data returns (rather than products blog posts).

  Hope this helps,

  Mihai

• I can't upgrade to Photoshop CC 2014, I get a Setup error: DF024: unable to preserve the original file to "/ Applications / Adobe Photoshop 2014/Adobe Photoshop 2014.app/Contents/Frameworks/ICUConverter.framework/Versions/3.6/libicucnv.dylib.36.0 CC CC" (

  I can't upgrade to Photoshop CC 2014

  I get a Setup error: DF024: unable to preserve the original file to "/ Applications / Adobe Photoshop 2014/Adobe Photoshop 2014.app/Contents/Frameworks/ICUConverter.framework/Versions/3.6/libicucnv.dylib.36.0 CC CC" (Seq 1120)

  A chat session where an agent can remotely look inside your computer can help

  Cloud creative support chat (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• the difference between the Web application server and Web server?

  What is the functional difference and the relationship between the Server Web applications and Web server, for example: Weblogic is the Application Web server, IIS is the Web server, Apache is the Web server and Oracle Application Server is the Application Web server? Someone said, Web Application Server is a Web server, but more functional superset, seems in this case, we can also use a server of web applications as a web server. For example, we can use Weblogic, but do not use IIS and Apache, please correct me?
  
  Published by: user2571802 on February 28, 2010 18:51

  Hello

  Have a read of http://www.javaworld.com/javaqa/2002-08/01-qa-0823-appvswebserver.html if all goes well it should give you a little more understanding.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

  Published by: JohnGoodwin on March 1, 2010 08:17

• Application of flow through Webgate and web application server

  I have a scenarios,

  There are two webgates on both web servers configured as a reverse proxy to an application. The doors of two web use external load balancer 1 (material). Two web portals are registered on two servers OAM (load balancing - logical web application server). The application is protected by OAM, and is set to launch a custom login page. The application web servers also use external load balancer 2.

  First, when the user tries to access the URL of the application, the flow would be:

  LoadBalancer1 - Web server with OAM WebGate - WebServer with WebGate (after successful authentication) - LoadBalancer2 (lettering) - server of web App - homepage

  Now, what happens if the user goes to another link within the app? The user will be routed to the loadbalancer 2 to the Web server with load balancer WebGate GOLD 2 to 1 load balancer, then to the Web server with WebGate. Please note that the web server with WebGate is configured as reverse proxy for the application. Sorry if I'm not able to articulate the situation clearly.

  Any thoughts?

  Thank you.

  Hello

  Allows to call the application URL app.mydomain.com. With the components you mentioned above, generally that would make a DNS change to point app.mydomain.com to 'loadbalancer1 '.

  Say so the user has already been authenticated and authorized and on the page of the application (app.mydomain.com/home.jsp). OAM is usually configured to protect web pages within an application. When the user clicks on 'Préférences' inside of home.jsp which is "app.mydomain.com/preferences.jsp", control would again go to loadbalancer1-> of the webgates.

  Hope that answers your question.

• UCCX 10.6 - Error Message: "the request to open a session in the Unified Cisco CCX application server has expired. Please make sure your system is online and try again"

  Hi guys,.

  My client has a solution with UCCX 10.6 and the system presented today, in the morning (08:00 more or less) followed the error message: "the request to open a session in the Unified Cisco CCX application server has expired. Please make sure your system is online and try again." After a minute the system back to work without nothing action. I saw the newspapers MIVR and not identify the possible cause of the problem.

  Can I help me, please

  Thank you

  Wilson

  These newspapers are not in a readable format. Look for something like lost connection

  Concerning

  Deepak