Unable to update Windows (error Code: Code 8004015)
original title: unable to update Windows
I run windows vista 32-bit, HP laptop, can provide details if necessary
When I try to update windows (my last update was 3/25), the update fails to check for updates, it reads:
An error occurred when the new updates for your computer. Error (s) found: Code 80040154
I tried it without real result on my own troubleshooting.
In addition, I can't update Windows Defender, which signals that it cannot check the updates of definition with found error:
Code 0 x 80244001.
I can not also turns on the AVG identity protection as it times out when you try to configure. I have performed analyses of the complete system with AVG, Malwarebytes and rootkits but with no infection research are, but I do not deny the possibility of having a hidden virus.
It may be helpful to say that my laptop has had problems with blue screens lately, even these problems with the updates before began. I got mixed messages on the blue screen, errors of entry being the most common. I think there may be something wrong with one of my drivers, I sent my laptop in for repair earlier and it wouldn't surprise me if they did not work. However, I did the repair of the tool without any result Windows driver.
Finally, the system restore does not work on my system for some reason any and I do not have a backup disk. Right now, I'm considering just buy windows 7 and all wiping. My laptop is not really unusable, it's just embarrassing to have it down every day and not be able to update.
Any advice would be appreciated.
Hello
(a) don't you make changes to the computer until the problem occurred?
I suggest you to follow the steps below and check if it helps:
Method 1: Try to reset the Windows Update components and check:
http://support.Microsoft.com/kb/971058
Method 2: Also try to clean boot and then try to install the update manually from the link below and check that if it helps, here is the link:
Clean boot - http://support.microsoft.com/kb/929135
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
a. Click Start, type msconfig.exe in the start search box and press ENTER.
If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
b. on the general tab, click the Normal startup option and then click OK.
c. When you are prompted to restart the computer, click on restart.
Hope this information is useful.
Tags: Windows
Similar Questions
-
Do not update Windows (error code 8007005)
Windows do not update. I get the error code 8007005. Eventually Windows is damaged? I have recently reinstalled Windows 7 upgrade (from Vista) when I did it I got an error (no real product Windows) but it is, and product code has been accepted.
This problem will also stop McAfee update also and I uninstalled McAfee as recommended and now impossible to reinstall the software.
Please, any help is needed.
concerning
Philip21
Hello
I'm glad to hear that your problem has been resolved and that Windows works as expected. Thank you for taking the time to share the status of the issue.
Kind regards
Gaurav Prakash - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think. -
Cannot update windows. error code 8024400 has
When enter the windows update error code click get express 8024400 a
Hello.
This error code means that the connection to windows update servers have been interrupted.
You have a stable internet connection? If you use wireless, how is the signal strength?
There is a tool for troubleshooting Microsoft here you should try:
http://Windows.Microsoft.com/en-ID/Windows7/Windows-Update-error-8024400a-8024400d-or-8024400e
-
Impossible to update Windows - error Code 0 x 80070641
original title: Windows Update not possible
My computer runs windows 2003 Professional with Office 2003 is installed. For about a month now, could not update Windows or Office with the error code given in 0 x 80070641. Have checked the MS site and this code doesn't seem to be listed. Can anyone help?
V.m. thanks for the help. Unfortunately, this does not work. Problem is related to the farmland automatic Windows that will not update automatically or manually.
I suggest you follow the steps in the link below and check if it helps:
How to resolve problems connecting to Windows Update or Microsoft Update
http://support.Microsoft.com/kb/818018/en-us >
05/01 / 1103:40: 36 pm
-
Try to update windows error code 80070641 641
place. updates for my Vista and everytime I try to update, it said I have 37 updates that I've updated took place and I get error code 80070641 641 and Ican can't figure out how to fix. I ran a number of times. Thank you
Hello domgolf,
Windows Update exception code 0 x 00000641 / 0 x 80070641 usually indicates a problem with the Windows Installer service.
Sometimes it's because of a difficulty to access; Sometimes, that means he is absent or inactive (disabled) for a reason any.
If you have used Iolo System Mechanic or any other registry cleaner for automatic crossings (auto-fix) and these exception codes, the cause is an overagressive difficulty of this app.
First proposal is to cancel these final corrections by S M, then make sure it is not set to autorun or Auto setting.
Do NOT continue to use System Mechanic until there is a permanent fix of Iolo.Contact Iolo (iolo.com) support
and request a permanent solution.
System Mechanic "cleaning the registry" has put a double whammy on your system in having abducted two registry keys.
The following will set things in order for the registry {at least for service setup}, so that you can then move on to redo the update of Windows.
These are for VISTA systems<>
Download this file from Ramesh S http://www.winhelponline.com/fileasso/regfix_vista.zip
Save it to your DESKTOP.
Extract the contents to your DESKTOP.
Click Start, type
REGEDIT and press ENTER key
from the main menu, select file
then Select IMPORT
Access the dialog box (click the icon on the DESKTOP on the left to select)
type regfix_vista.reg in the file name text box and click on the Open button.
Once the merger is completed, you will see a confirmation message.
Click OK when finished.
Then download this second registry-fix
Download and SAVE on your system (on the desktop or in a single folder) following the registry-fix file
http://download.bleepingcomputer.com/win-services/Vista/msiserver.regRight click on the msiserver.reg file and select MERGE
When to get confirmation message on the merge, click the OK button.
If you are prompted by User Account Control UAC, allow to go forward.
If and only if the Merge option is not available, and then double-click the file and allow it to merge into the registry.
IF and file '.reg' appears in REGEDIT, when you are prompted whether to merge answer Yes.
When finished with two registry patches, leave / close REGEDIT.
then the costs of closing of session and restart Windows.
Now try Windows Update again in a new race.
Only a custom scan.
Simply select the critical or important updates. (non - select all those in option).
Let me know if it helps. and if so, please click the Green YES (useful) icon to the left.
If it solves your problem, please click the green icon to MARK IT on the right.
-
Update Windows (error code 641)
original title: update Windows
Cannot download the update of Windows security. Get error CODE 641
Hello
I suggest that go you to the link below and run repair to reset the Windows Update components. It could help us solve the problem of Windows Update.
http://support.Microsoft.com/default.aspx/KB/971058Go to the link below to learn more about
How to solve the error message when you try to install Microsoft Update on a Windows Vista-based computer: "cannot install Microsoft Update on the computer.
-
Update Windows Error Code 8024402F - cannot search windows update
This error code can be repaired through all the suggested methods, made to the Support Section of Microsoft as well as in the answer section.
My laptop is Sony Vio (32 bit system) and installed licensed microsoft products and running Windows Vista Home Premium.
Also, I installed Microsoft security essentials.
Please note that the error message reappears after a few seconds by getting a confirmation that the problem has been resolved successfully.
Code error Windows Update 80244016, 8024402f, or c80003fa
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80244016-8024402f-or-c80003fa -
Please help, I am not able to update windows: error code 0x80070005
This is my result
HKLM\software\Microsoft\Windows\CurrentVersion\Component Servicing\Retry Agent of baseHKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\SqmHKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\Package_for_KB955430~31bf3856ad364e35~x86~~6.0.1.18005HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\Package_for_KB955430~31bf3856ad364e35~x86~~6.0.1.18005\InstallCounterHKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\VistaSP2-KB948465~31bf3856ad364e35~x86~~6.0.0.18005HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\VistaSP2-KB948465~31bf3856ad364e35~x86~~6.0.0.1800Error code 0 x 80070005 is also described as ACCESS DENIED (you may not to install updates).
Please check that you are logged into an account with administrative privileges.
Please follow these instructions if you encounter this error code during checking or install updates via Windows Udpate. What follows applies only to Windows Vista.
- Download AccessChk (Sysinternals). This tool allows you to assess the level of access of some users or groups of resources, including files, directories, registry keys, global objects and Windows services. Here is the link to download the tool: http://technet.microsoft.com/en-us/sysinternals/bb664922.aspx
Save the file on your desktop zip and extract the file:
-Right-click on the file and select extract all...
-Click Next when prompted for the Destination.Therefore, you should see a folder called AccessChk on your desktop.
Open the folder AccessChk
Hold the SHIFT key and right-click in the window. Select "open here command prompt.
A command prompt window should open a similar message:
C:\Users\\Desktop\accesschk > Type the following command and press ENTER:
"" AccessChk.exe "nt service TrustedInstaller" s - n k ' hklm\software\Microsoft\Windows\CurrentVersion\Component Based Servicing "> accesskchk.txt
Tip: You should be able to copy and paste the command into the command prompt.Close the command prompt window. Open the Accesschk folder on your desktop (if it has been closed).
Double-click Accesschk.txt (text file), it should open Notepad.
Copy and paste your results with a new question in the forum of Windows Update. (Make sure that you write 0x80070005 in the subject).
If this is not enough: -.
If please download the subinacl.msi from the following link and save the patch to installation on the desktop:
http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads
SubInACL (SubInACL.exe)
SubInACL is a command line tool that allows administrators to get the security information on files, registry keys, and services, and the transfer of information from one user to another, from local or global group to and from a domain to a domain.Please, go to the desktop and double-click on the downloaded file.
Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.
Click the "Start" button in the "Search" bar, type: "Notepad" (without the quotes) and press ENTER.
- Copy the following commands, and then paste them into the opened Notepad window:
off @echo
Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f
Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
Subinacl % lecteur_systeme % /subdirectories / Grant = system = f
@Echo =========================
Completed @Echo.
@Echo =========================
@pause - After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.
- View the desktop and right click the reset.bat file, then choose "Run as Administrator".
- You will see a window of type BACK treatment.
NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue." -
updated Windows error code '00000643' and '00000646.
Here are the error codes I get when I run my updates, I think that my computer is not working properly because of these updates is not installed please help :)
Try this for your error Code 646 and read ALL the messages/solutions to your problem on the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/f3390e74-9961-4AAE-8a05-554c1a9cf1a2
Read the info on the above link to error Code 646.
With the compliments of: David_O - Support Engineer
This problem occurs when the agent Windows Update Wups2.dll file is incorrectly registered in the registry. Because registry files that correspond to the Wups2.dll file are missing, update facilities have failed. There are two methods to resolve this issue, use method 1 first, and if it did not resolve your issue, go to method 2
Method 1: Save the Windows Update files
1. clickStart and type notepad in the box start the search .
2. click onNotepad in the programs list.
3. copy the following commands, and then paste them into the opened Notepad window:
REGSVR32 WUPS2. DLL/S
REGSVR32 STINKS. DLL/S
REGSVR32 WUAUENG. DLL/S
REGSVR32 WUAPI. DLL/S
REGSVR32 WUCLTUX. DLL/S
REGSVR32 WUWEBV. DLL/S
REGSVR32 JSCRIPT. DLL/S
REGSVR32 MSXML3. DLL/S1. in Notepad, on thefile menu, click on record under.
2. in the listrecord under , click all files.
3. in thefile name box, type register.bat.
4. save the Register.bat file to your desktop.
5 right-click the Register.bat file, and then clickrun as administrator. Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password or clickcontinue.
6. try to install the updates again.
Method 2: Download and install Windows Update agent
For more information about how to download and install the latest Windows Update agent, click on the number below to view the article in the Microsoft Knowledge Base:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/default.aspx/KB/923100/
When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If the above does not help:
You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include this error Code and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon.
Mick Murphy - Microsoft partner
.
-
Cannot install updates Windows error code 800736B 3.
OT: update Windows.
Windows Update on my computer of widows 8 will not be updated, saying: it should be updated its self. When I try, it gives me an error code 800736B 3. I tried troubleshooting. What to do next?
Hello again, follow the recommendations here.
I wish you good work.
< this="" message="" or="" suggestions="" help="" you="" somehow="" "mark="" as="" answer"="" link="" tiklatiniz.="">
-
Update windows error code 0 x 80248015
"erroe code: 0 x 80248015" windows Defender cannot verify the update of definition. I downloaded the "mpas-fe" update and run it, but it doesn't do anything, it simply retrieves the firle and what it... HELP know whaat to do?
Windows defender, the definition version: 1.125.760
Windows vista edition Home premium
32-bit system
2007 microsoft Corporation
Clean the system (compensation to all temp/tmp folders and included all the content offline, the tif browser, delete the cookies of compensation.)
http://winhelp2002.MVPs.org/delcache.htm>
(Important: one of the normal steps in the removal of malware is to completely erase all temp files)
1. cookies
2 local Settings\Temp
3 local Settings\Historique
4. local Settings\Temporary Internet Files
Do a disk cleanup. Click the Start button. in the search box, type disk cleanupand then in the list of results, click Disk Cleanup. Better and easier to use - ccleaner.
Download the basic version (slim) via
http://www.Piriform.com/CCleaner/builds>
The basic version (slim) does not contain the toolbar disgusted
The standard version install the Yahoo toolbar as an option, which is disabled by default during the installation. IF you don't want it, uncheck the box when with the option OR download the basic SLIM toolbarfree version instead.)
DO NOT USE ANY cleaning of the advanced options. DO NOT TOUCH THE REGISTRY OR TOOLS. At least not for now.
Reset
Rename the folder C:\Windows\SoftwareDistribution
1. stop the Windows Update service (make sure that you are logged on as administrator)
Start button > | Control Panel > | System and Maintenance > | Administration tools
Double-click on Services
(Provide the administrator password or a confirmation if prompted to do so.)
Right-click the Windows Update service and click on stop.
2. click on start, type %windir%\System32 in the search box and press ENTER.
Find and rename the folder C:\Windows\SoftwareDistribution.
3. start the Windows Update service
Start button > | Control Panel > | System and Maintenance > | Administration tools
Double-click on Services
(Provide the administrator password or a confirmation if prompted to do so.)
Right-click the Windows Update service and click Start.
Note: this procedure will remove your history on the Windows Update Site. Not important.
Reset
See if the system can update now.
UTC/GMT is 02:14 on Sunday, April 29, 2012
-
Windows Update - Windows error code may not search for updates - 80080005
My HD crashed and had to get a new one. When I got my laptop, 2 weeks ago I was told because I have a new HD, my laptop has been restored to factory settings.
Ever since I have EDT decided to back up my laptop, I get an error message from my windows update.
For this reason many of my programs do not work as usual. For my internet browser, for example, if I have to use the ActivX Control to upload a file it refreshes just the screen.
You are able to help with my problem or should I go elsewhere?
Hi ImDaPanda,
Please see the post below so that we can help you:
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/1467f44b-ee27-4f7d98d7-f1c4b35b3395While I'm waiting for your quick response, run the Microsoft FixIt in KB 971187 - how to fix the MSI software update registration corruption issues by clicking on the link below:
http://support.microsoft.com/kb/971187. Then, try again on your Windows Update.If this post can help solve your problem, please click "Propose as answer" If you find it useful, mark it as useful by clicking the 'Vote as useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
I m unable to update windows Defender... it shows always a few code.what of the error to do nw?
How to troubleshoot Windows Defender definition update
http://support.Microsoft.com/kb/918355 -
Windows Vista update 80070490 error code
Hello
Can someone help me with this problem! I tried everything under the Sun to fix this, so I hope you is more aware that me can help! ??
Hello
This issue of update Vista seems to be known to Microsoft:
+ If you receive the Windows Update 80070490 error, this means that a file (CBS Manifest) that is needed to install updates is corrupt. To correct this problem, you will need repair Windows. Repair Windows will not damage your personal files or the programs that are installed on your computer. +
More details here how to solve this problem:
[Windows Update 80070490 error code: http://windows.microsoft.com/en-us/windows-vista/windows-update-error-80070490]
-
Windows does not update with error code 8024402C
Windows does not update with error code 8024402C
Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.
What application or antivirus security suite is installed and your current subscription? What anti-spyware (other than Defender) applications? What third-party firewall (if applicable)?
A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?
0x8024402C error code when you try to install updates on Web Windows Update or Microsoft Update sites:
http://support.Microsoft.com/kb/900936~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
This problem may be caused by third-party security programs such as firewalls and antivirus software. You can disable or remove to check the issue.
Maybe you are looking for
-
Reel and programs responding slowly
TThis morning I started having trouble with my MacBook Pro 2012 with 16 GB of RAM and 250 GB SSD. programs slow incredi and reel respondent appears often. Arrested three times and rebooted with no difference. First aid and a reset any based on ano
-
Hello world While on other systems junk once using mail is moved through the system, the junk e-mail folder, it is marked as spam and therefore you can not open it. I think that it is so that you do not confirm your email address. I love the Apple ma
-
Satellite L50D-B - 16 Q do not recognize the printer or upload photos
Hi all My computer does not recognize my Dell printer when connected (my old laptop made) or it download pictures from my galaxy phone. When I connect the printer even to my old laptop he locates the it, no problem. Even with pictures, it loads immed
-
Satellite Pro A100 - Debian - it'll work?
The WiFi in the Toshiba Satellite Pro A100 device will work with Debian? If this is not the case, can you recommend a suitable device that attaches to the laptop. Josh
-
The question of samples number
When the software reads or data stream (and the results on the graphs). I want to change the number of samples while its reading data, and when the number of samples is changed graphic updates, without stop and start playback (which is what he does a