Unable to upgrade to Windows 10 due to display and CPU Incompaitibility?

Similar Questions

• XPS 13 (9343) - unable to upgrade to Windows 10 - error 0xC1900101 0 x 30018

  I have a brand new 13 XPS, 9343 model with i7 processor and 512 GB SSD. I'm still within the period of 14 days, and I'm now seriously returning. I've never known such a load of nonsense trying to install any other piece of software.

  So far, and after many attempts, I was completely unable to upgrade to Windows 10. The first thing I did was to install all the Windows updates available for 8.1 (there were 79 of them), and immediately after that I started the saga to install Win10. Nothing else has been done to the laptop - no questionable software or USB devices (except the USB boot if necessary). It is in a State of cleanliness.

  -After the download via Windows Update, the installation procedure is INCREDIBLY slow (for example, it takes 36 HOURS to reach 42% completion - and at this point, it hits the error message). What the heck can he do?

  -J' also tried to create a bootable USB drive via the media creation tool. If I boot from the USB key and perform a "clean" installation, it works perfectly: it takes about 8 minutes total (which highlights how ridiculous the 36 hours). However, because it is a clean installation and not an 'upgrade', I find myself with a non-activated version of Windows 10 and I am asked to pay £99.99, I don't intend to do. I paid for the laptop on the understanding, he would get a FREE upgrade to Win10!

  -J' also tried using the USB key (but not the start of it) to perform the upgrade in place - this strikes the same mistake as Windows Update (and taking so long)

  -J' tried to uninstall all antivirus software, and disable all wireless/bluetooth devices before performing the upgrade - nothing of this aid. Because need me 36 HOURS per attempt, it is really not acceptable to try disabling things randomly in the vain hope that it might work correctly.

  When trying to upgrade (i.e. not), I hit an error message "Windows Setup cannot set up Windows on your hardware" or similar. During the recovery after the failure, tool configuration gives the 0xC1900101 error code 0 x 30018 and says it failed in operation 'FIRST_BOOT', the phase SYSPREP. Just make this error message cost me 36 hours of waiting (welcome to the future!), then it would be really helpful if someone could give me a definitive answer on what makes...

  Help, please! Auuughhh

  Hello world

  If you are affected by the issue in which your XPS 13 is not upgraded to Windows 10 and he is stuck or take several hours, PM me with your serial number.

  Thank you

• I m unable to turn on windows Defender. It displays error 0 * 800106ba. I m using microsoft security databases since then I m having this problem

  I m unable to turn on windows Defender. It displays error 0 * 800106ba. I m using microsoft security databases since then I m having this problem

  Hello

  Are you running MSE or other antivirus/security programs stop Windows Defender running?
  Whether Windows Defender is blocked from running by them. McAfee, AVG and many others to do this.
  MSE includes features of Windows Defender inside run that separately it would be redundant.

  ------------------------------------------------

  Troubleshooting of Windows Defender
  http://support.Microsoft.com/kb/555957

  "%ProgramFiles%\Windows Defender\MsAsCui.exe" is the folder of the default Defender

  Start - type in the search box-> Windows Defender - find top - make a right click on it.
  RUN AS ADMIN

  If no joy using Start - computer or Windows Explorer to access this folder and create a
  Shortcut to put on the desktop and the Start Menu. You can also right click on a shortcut this and
  see if they point to here.

  Goal
  "%ProgramFiles%\Windows Defender\MsAsCui.exe".

  Start in
  "%ProgramFiles%\Windows defender.

  How to enable or disable the Windows Defender
  http://www.Vistax64.com/tutorials/93118-Windows-Defender-off.html

  --------------------------------------

  Maybe something here if necessary:

  What is display / causing the error message? Some anitvirus/security/antispyware products can
  cause this error. On those who use you, including those that your never had even those
  uninstalled (the remnants can cause problems). McAfee is just an example of what many can do.

  Start - type in the search box - Services - find top - Right Click - Run as Admin

  Windows Defender - value STARTED and AUTOMATIC

  or set MANUAL and STOPPED if necessary

  Fix for the problem of 800106ba.
  http://support.Microsoft.com/kb/931849

  Error (an example) of McAfee report.
  http://service.McAfee.com/faqdocument.aspx?ID=TS100610&lang=en_US&prior_tid=2&AnswerID=16777216&Turl==http://KB.McAfee.com/InfoCenter/index?page%3Dcontent%26id%3DTS100610%26actp%3Dsearch

  Check also:

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/574fb871-034C-4B42-B800-328af16a9177

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Upgrade to Windows 10 erase all files and programs now on my computer, or make it unusable?

  Upgrade to Windows 10 erase all files and programs now on my computer, or make it unusable?  I have since I have not answered on this site, I headed to the computer store, 'Best Buy', to see if their staff or their staff of in-house computer repair people called "Geek Squad" could answer this question.  NONE OF THEM COULD.

  Well up to now, I had a lot of problems with windows 10. Some programs do not work. My wireless guard is disconnected. And when I restored it windows 8.1, my browsers did not work. It's just on a single computer. Others have not yet verified, I'm very satisfied with the situation. He also removed my antivirus program.

  The biggest problem is with the software I paid for and that you do not have a disk to reinstall. WHY - because today ' today, software publishers want you pay every month, and when things like that, go bad, there is no record of re - install the software. I spent hours trying to solve this problem, but until now I'm waiting for Microsoft's online live chat 194 minutes go.

  I would say that they should have ethics applied to developers of software for this kind of things don't happen. How unfair is that they release a product with a ton of bugs simply because developers are too lazy to correct the problems before its release. They must be charged a fine for lack of ethics in programming.

  So to answer your question - so far the files are still there, but has great difficulty with the programs works not as they did. In addition, if go back you to an earlier version of windows, it seems that they made it impossible for previous versions to work as before without having to reinstall all the software you have.

  I'd wait until they have corrected most of the bugs. I'm stuck, but you're not.

• HP Pavilion 17 t: upgrading to Windows 10 Due to error 80070003 failure.

  Recently, I tried to upgrade my computer to Windows 10 but I'm not able to update due to this error 80070003

  I tried several times but the error pops up whenever I try to upgrade!

  Are there any solutions for me?

  Follow this:

  Windows Update troubleshooting

  The first thing you need to do is to start the Windows Update troubleshooting tool to find and solve problems for you. So, follow the steps.

  Search for Troubleshooting within your search box in Windows. If you are on Windows 7, go to the Start menu and search for it inside the box at the bottom of the menu. In Windows 8, follow the same procedure to open the troubleshooting windows. After the search, find Troubleshooting and click on it to open it.

  On the inside of the window of the incident, navigate down, then click on system and security to proceed to the next window.

  Inside the system and security window, navigate down once again, and you will see Windows Update. Right-click on it and select run as administrator.

  When you are troubleshooting Windows Update tool, click the Next button to start the process. If the first attempt, he isn't the problem, try again to restart the process of troubleshooting. After that is done, it should automatically fix the problem. Close the window and go to the next step.

  Building on Windows Update:

  After the success of the process of troubleshooting, open the command prompt by searching for it in the Start menu. Make sure to run as administrator too in order to operate correctly.

  Inside the command prompt, type the following command and press Enter to start pushing the update of Windows 10.

  Wuauclt.exe /detectnow /updatenow

  You should see Windows update to start the download of Windows 10. It will solve Windows error 80070003

  Source: https://techyuga.com/fix-error-80070003/

• Unable to upgrade to windows 7

  Hey! I tried to upgrade to Windows 7 Home premium to windows vista home premium.  The upgrade works fine until it transfers files and get the blue screen of death at around 60%.  My computer then restarts and goes back to vista.  I've seen issues with this similar issue but the solution was to obtain an updated version of 'Intel Matrix Storage Manager or the Intel Turbo Manager', I am unable to find these programs on my computer so I was curious to know if there is another solution?

  Your Q should be placed on the Group of Win7 and not here, a group of Vista

• HP Windows 7 unable to upgrade to Windows 10 laptop

  I trust HP for years since we got the first programmable HP hand-helds to JK Gill in 1976.

  To find out that HP laptop I paid a lot for in 2010 is going to be completely obsolete is too sad for words.  Is there SOLUTION No. at all for my computer?  It's a HP dv7-3060us Entertainment Notebook.  I bought with my money of colonization when I disabled for cancer.  It has been a lifeline so far but now it is going to be obsolete?  Is there nothing to do?  There is no way to upgrade to windows 10?  I happen to love windows 7 but I understand that it is a lost OS also.

  Someone at - it answers?

  Thank you very much

  SissyBeans

  @SissyBeans:

  It is often better to have a laptop computer running an OS more old where everything works, only faced with a new operating system where things are 'broken.  As long as it works OK for you, it is not "obsolete".

  The problem, that you are facing is that Microsoft provides only pilots with the most basic features and what you really need for these features in laptops is the specialized drivers written for the specific material found in laptops - and unfortunately, there is no HP Win10 laptop driver.  HP only guarantees the compatibility of Win10 for machines manufactured after August 2013. HP is not no matter what timetable indicating when, or IF, they will produce drivers for older machines.

  So that you CAN update to Win10, I would personally recommend against him.  I tried to update two portable Win7 on Win10 and upgrading two of them ransacked.  Construction machinery 5 years ago only were not with Win10 in mind.

  As for Win7 being a 'lost' BONE - if it is true that MS has ended mainstream support for Win7, MS don't end updates to security for your Windows 7 PC until January 14, 2020. So, there's lifes in Win7 for years to come.

  As for not having Win10, I was a beta tester for Windows products and was one of the first initiates Windows test Win10 - and over the years of this, I have never been also disappointed by the total lack of improvements I have with Win10.  Without new hardware and a touch screen, Win10 is a little more than Win8.2 - with a bunch of stuff that was moving and a new half-baked Start Menu, for which there are better alternative third-party.  He misses you very much.

• Unable to upgrade to Windows Vista Basic to Windows XP on hp pv6000

  Original title: upgrade

  upgrade vista basic to windows xp on hp pv6000 and my wireless is not wrking nor showing in my taskbar please help

  Hello

  Vista to XP is a downgrade!

  After installing XP, did you get XP drivers on HP website? See...

  http://WWW8.HP.com/UK/en/support-drivers.html

  .. .to locate your particular model, then download and install the XP drivers (if there no, no guarantee if your PC comes with Vista originally).

  I tried the model number you gave, but there are 41 possible matches, so I think that pv6000 is a "series" rather than a specific model number.

  Tricky

• Pavilion G4-2111TX: HP Windows 7 unable to upgrade to Windows 10 laptop

  Have a HP Pavilion G4-2111TX laptop, running on Windows 7.

  When trying to upgrade to Windows 10 to get this prompt:

  "Air Display (Microsoft Corporation - WDDM v1.1).

  The manufacturer of the screen did not your screen compatible with Windows 10.

  Check with the manufacturer for support.  "

  Y at - it software or hardware, I can change to allow upgrading to W10?

  What are my options?

  Thank you.

  Sorry, but HP did not Win10 driver for your device, and if you improve not to Win10, it is likely that you will be blocked from using the graphics card base - that would actually work.

  HP only guarantees the compatibility of Win10 for devices manufactured after August 2013.

  It is not unusual for a Win7 machine NOT to be expandable to Win10 because the material, at the time, was not designed for compatibility Win10.

• Unable to upgrade to Windows 7 Home Premium Vista Home

  I tried several times to upgrade to Windows 7, but I get the following response when running the upgrade;

  These devices may not work properly after the upgrade. Before the upgrade, we recommend that you update the drivers for those devices. Cancel the upgrade, open the control panel and search for "update device drivers" or go to the website of the manufacturer of the device to search for updated drivers.
  • • Mobile devices: Microsoft USB Sync
  • Network adapters: Microsoft Windows Mobile remote adapter
  • I tried the lead as much as I can to try to alleviate this problem, but I still get the same problem.

    I know that my laptop is able to support Windows 7 that I am able to do a clean on a new hard drive install but it is has obviously something installed on my Vista HD which prevents one upgrade, I know I have the ability to perform a clean install, but I'd rather do an upgrade , because the amount of software that would need to be put back would be much too long.

  If you have run Windows 7 http://www.microsoft.com/windows/compatibility/en-us/default.aspx Upgrade Advisor then uninstalled all peripheral incompatible & software but still this problem, there is no alternative to the clean install, other that ignoring the msg & installation

• Cannot upgrade to Windows 10 due to the problem of electricity

  * Original title: update problem

  I am currently using Windows 7 Professional sp1 but I can't upgrade my country turning on (power problem) and pauses for a long time so I just want to know can I use windows 7 pro key on windows 10 pro sp1 to make true please help me as soon as possible

  Hello Pierre,.

  Yes, you can use your windows 7 key provided that you have the latest edition of windows with the November 10 update. Old edition published in July would not accept key of Windows 7.

  Make sure you only download correct edition of Windows 10 with correct language.

  I hope that you are not the India, because I think that there is now much less powercuts

• Upgrading from Windows Vista Home Premium at 8 - CPU does not support NX

  Hello

  I have Vista Home Premium (very probably OEM as it came with the PC) on a PC and I bought the upgrade license to Windows 8 Pro.
  I understand that it is in terms of the license transition, but here is my problem:
  The CPU does not support NX (and for sure there is no setting in the BIOS for this).
  So I can't move to 8.
  To replace the CPU, I need to replace the motherboard.
  If I replace the motherboard my understanding is I'm losing the license because it OEM.
  So, in reality, I can't switch to Win 8.
  The license, I bought said that I can pass any system running XP, Vista, Win 7 to 8 Win.
  It does not distinguish between older versions of Windows OEM and retail versions.
  For me, it's a huge conflict.
  So the question is:
  Can I change the CPU + motherboard to earn 8? or not?
  Thank you
  It has been some time but I finally had the time to do the upgrade (hardware + software).
  For history and for others who could come on this post with a similar question and be discouraged by responses like this:
  I contacted the technical support of MS and they confirmed that I had a Windows 8 Pro upgrade license and after upgrading my license would Win 8 Pro full-detail (what you want to call it). Essentially, after upgrade, I can reinstall any other motherboard. Of course you can only use a license on a machine at one time.
  (Of course your upgrade license type may be different to mine, so you should check they type of license)
  In any case, what is more interesting, it of that I got the confirmation that I can do a clean install and activate my upgrade license. Not only that, but they recommended the installation of Vista should not be present when installing on 8 to win. I was very skeptical and I asked for an account of the cat to be on the right side. They assured me that the support had made several times and is not a problem.
  And so, I do a clean install on the new motherboard (and a new player) and activated windows 8 with no problems at all.
  It seems very stupid that you can change the motherboard after the upgrade, but could not make the move and the Windows update at the same time. Fortunately, it is not the case.
  To me, it seems that the MS are aware that in you to go from XP (soon), they should also use the materials for the upgrade.

• I have Windows Vista Home Premium and according to the sites (Microsoft), it is a FREE upgrade to Windows 7, is this correct and where do I go to find the Site to download free upgrade?

  Upgrade Vista to Windows 7

  There is no free upgrade available currently. There was a promotion, but it ended two years ago.

  I heard that if you buy Vista you get a copy of Windows 7 free
  The Windows 7 upgrade Option is available through participating PC manufacturers on some PC and Microsoft on any purchase of packaged product Windows Vista. The Windows 7 upgrade Option applies to Windows Vista Home Premium, Business and Ultimate editions. Your upgrade to Windows 7 will be the comparable version: so you will get either Windows 7 Home Premium, Windows 7 Professional (upgrade to Windows Vista Business) or Windows 7 Ultimate, respectively. The Windows 7 upgrade Option program works on June 26, 2009 through January 31, 2010.

• Windows will not start and repair failed. Can I upgrade to Windows 7 from this situation and get Windows 7 to begin?

  Any help will be apprecdiated.

  Normally, you do an upgrade from the inside of the race and activated the operating system.

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Can I upgrade level windows without losing any data and programs?

  I have a HP laptop with home premium pre-installed and think to upgrade to professional using microsoft retail CD purchased because the "Anytime Upgrade" program just show me an error during the upgrade, will I lose all data when the symbol or programs when you use the win 7 pro retail CD?

  Really, you must use Anytime Upgrade.

  If the license for Windows 7 Professional, you have access to is a retail version update or complete, you can use the product key and the Express upgrade to Windows 7 Edition Home Premium to Windows 7 Professional. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Professional on demand, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Professional your files, programs and settings retained.

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade