Uncaught exception when you are not debugging

I have an application that analyzes XML and uses threads to display a progress bar while it analyzes the data. It works without a hitch, when the unit runs in debug mode on a simulator, but when I select run as... and select a simulator during the analysis, the application closes with error

"Eception Exception: Application BBRitis (162) does not; process is completed.

There are no exceptions when debugging, and without breaks. How am I to determine and correct the cause of the error? Anyone know what this could be?

Thank you!

OK the theory number two, this one seems more likely given the stack trace.

You update the screen using invokeLater?  How often do you do that.

If you do this frequently, then treatment to generate updates may in fact take less time than processing for updating the screen.  In this case, you are invading the event queue.  This will be acknowledged by the Dispatcher that assumes that you have blocked the thread of events.  Where, as in fact the problem is that the thread of events cannot process quickly enough.

Can you make sure there is at least 0.1 seconds between your ' of invokeLater?  You can also use "invokeAndWait", or synchronize the lock of the event.  However I do not think that you need to update the screen as frequently, so I woould go with some sort of delay between updates, then use the lock of the event because it is the most effective (and does not imply the queue of flooding).

This seems reasonable?

Tags: BlackBerry Developers

Similar Questions

  • should I turn the printer off when you are not using it?

    you just buy new printer - HP envy 5530 - need to know if I need put it off when you are not using it or if it passes in mode "sleep"?  other printers I had went to sleep mode however cannot locate this answer in the FAQ - like entry - thanks ~ ) husband

    Welcome to the mgchandler forums,

    I saw your post on want to know if you should be powered down the printer or if it won't fall in the mode 'sleep'. My best advice would be to turn off the printer by the power button if it will not be used for a period of time, for example during the night. Regards the mode "standby", the printer goes into standby after 5, 10 or 15 minutes of inactivity.

    • To change the settings for sleep mode, go to the front screen of the printer and press settings (wrench)
    • Contact preferences
    • Press the arrow down and on Standby Mode when you see
    • You can now change the time of mode 5 to 10 to 15 minutes before

    User - Guide Page 93 + 94 for Info Sleep Mode

    I hope I helped answer your question!

    Have a great Tuesday

  • Can you read a DPS 2015 app when you are not connected to the wi - fi?

    Can you read a DPS 2015 app when you are not connected to the wi - fi?

    As mentioned, articles that have already been viewed are cached locally on the device for offline use. Note that the application, if any, will remove the oldest available items to free up space.

    If your reader wants to ensure that a collection is available offline, we have a new feature on iOS which was released Friday, which allows an explicit download of a collection and prevents purged automatically. See Digital Publishing Solution helps | What's new in this version of DPS 2015 for more information. This feature is currently on iOS, and will be available on Android and Windows in a few weeks.

    Neil

  • Vista Ultimate x 64 freezes randomly even when you are not running applications

    I feel the random system freezes from my PC. My PC Spec is below. Even if being run without applications and the system is on the desktop system will freeze randomly (can not move the mouse and the keyboard does not respond) and will force me to restart the system manually. I noticed an error message in the event viewer what cultures upward each time that this gel coming and I was wondering if you could provide me with a solution?

    Filter event with the query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace '//./root/CIMV2' because of error 0 x 80041003.» Events cannot be delivered through this filter until the problem is resolved.

    I have included my PC specs and components below, but it is unlikely to be a hardware problem most of the time, even when focusing on the computer with 'memtest' etc it will not break.

    Power: 800 W

    [Product information]
    * Product type: motherboard
    * Product model: M4A78T-E
    * Product S/N: 93MOAI569328
    Place of purchase: www.scan.co.uk
    * Date of purchase: 2009/6/7

    [Map mother specifications]
    * Revision of the motherboard: 93MOA1569328
    * Card motherboard BIOS revision: worm 2208

    [VGA Card Specification]
    * Supplier of the VGA card: GIGABYTE
    * VGA card model: GV-R467ZL - 1GI
    * VGA card Chipset: ATI RADEON HD 4670
    * VGA card driver: 8.563.0.0

    [CPU specifications]
    * Provider of CPU: AMD
    * CPU Type: PHENOM II X 2 550 BLACK EDITION
    * Processor: 3.1 GHZ

    [Specifications memory]
    * Memory seller: CORSAIR
    * Memory model: XMS3 DDR3
    * Memory: 2 X 2 GB

    [HARD drive specifications]
    Seller of HARD drive: WESTERN DIGITAL
    HARD drive model: CAVIAR BLACK
    HARD disk capacity: 160 GB

    [The module map specificatio]
    Seller of maps add-on:
    Type of card module:
    Model of card module:

    * Operating system: Vista 64 bit

    Hello

    Try the clean boot method, which is a process of elimination to see what could be the cause
    the question. Pilots also have an influence on the performance of the system so I would update those
    as well.

    Norton has been known to cause strange problems on some systems, so I would use the
    Norton Removal Tool to check its impact. The following recommendations for free
    replacements, so you have good protection while check you this. Download all
    replacements before you remove Norton and install after removing and resetting.

    Download - SAVE - go to where you put them - click on - RUN AS ADMIN
    (Norton Removal Tool and others)

    Norton Removal Tool
    http://Service1.Symantec.com/support/tsgeninfo.nsf/docid/2005033108162039

    List of tools to clean/uninstall anti-malware programs
    http://answers.Microsoft.com/en-us/protect/Forum/protect_start/list-of-anti-malware-program-cleanupuninstall/407bf6da-C05D-4546-8788-0aa4c25a1f91

    -------------------------------------------------

    Here's what I use and recommend: (these are all free and very effective versions.)

    Avast and Prevx proved extremely reliable and compatible with all I have
    launched on them. Microsoft Security Essentials and Prevx have also proven to be very
    reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

    Avast Home free - stop any shields is not necessary except leave the file system, Web,.
    Operational network (Script and behavior are also recommended in Ver 6 +).

    Prevx - Home - free

    Windows Firewall

    Windows Defender (is not necessary if you use MSE)

    Protected IE - mode

    IE 8 - SmartScreen filter WE (IE 7 phishing filter)

    I also IE always start with asset if filter InPrivate IE 8.
    (It may temporarily turn off with the little icon to the left of the + bottom
    right of IE)

    Two versions of Avast are available 6.x and 4.8 x

    Avast - home - free - 6.x stop shields you do not use (except files, Web, network, &)
    Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
    Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
    Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
    disabled - click OK
    http://www.avast.com/free-antivirus-download

    Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
    and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
    Finish those you don't use).
    http://www.avast.com/free-antivirus-download#TAB4

    Or use Microsoft Security Essentials - free
    http://www.Microsoft.com/Security_Essentials/

    Prevx works well alongside MSE or Avast

    Prevx - Home - free - small, fast, exceptional CLOUD protection, working with the other security
    programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here or
    Use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp?prevx=Y   <-->

    PCmag - Prevx - Editor's choice
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
    would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
    (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
    never find anything of note that I started to use this configuration.
    http://www.Malwarebytes.org/products/malwarebytes_free

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • y at - it a soft note for the Apple Watch that can be used when you are not wearing your phone with you?

    Hello

    Y at - it a notes app where you can see the note when the watch is not attached to the phone?

    Using OneNote, for example is very good when the watch is related to the phone, but if I'm going to run and leave the phone at home / in the Office I can't see the note.

    I need to remember several combinations of numbers, which are stored on the phone, but I don't want to use running with the phone, so looking for a way to store the numbers on the watch.

    Any ideas?

    Thank you

    Hello

    You can see that the following application (for example) meets your needs:

    • Cheatsheet - A Quick note keyboard and today Widget

  • Saving ink by powering off the power when you are not using it?

    I have a HP Officjet 6700 running under Windows 7 64-bit and read that turning off your printer when you don't use to save on ink. Is this true?

    Hello

    Right, but turn off will save a bit of power. Inkjet printers need ink more when you turn very often.

    I hope this helps.

  • question about the battery of the laptop when you do not use

    Hello

    I see that if you take the battery laptop out when you are not using and you're wotking with adapter suply, it wil extend the life of the battery.

    But what if I do not use this battery for several days and I put it away wil he unload his omnipotence?

    Thank you

    Johan

    Hi Johan,.

    I don't think that it helps extend the life of the battery if remove you it from the laptop. It will also pay power when you are not using it.  For more information on the functioning of the battery, I would say that you see the battery user guide provided by the manufacturer of your laptop.

    Hope this information helps. If you have any other questions, we will be happy to help you.

  • Why my start page says "you are not on the latest version of Firefox. Update today to get the best of the Web! "when in fact I have the latest version?

    I've upgraded to the latest version of Firefox, but I always get a message on my home page that says "you are not on the latest version of Firefox. Update today to get the best of the Web! »

    You can see this message under the Google search box on www.google.com/firefox which is the old default Firefox homepage. It seems that this page is no longer maintained by Google. You seem to have the latest version of Firefox.

    If you want as the Google search page as homepage, change your homepage to Subject: House (a new version of the old homepage Google/Firefox update is now integrated into Firefox).

    Also see-> https://support.mozilla.com/en-US/kb/Finding+your+Firefox+version

    You can also see your version on the help > troubleshooting information display

    If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

    Not related to your question, but...

    You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • On my Firefox start page, a message says, "you are not on the latest version of Firefox. But when I go to help, and on Firefox, this window says I'm under 8.0 and Firefox is updated. So, why am I conflicting message? Thank you

    I downloaded Firefox restarted 8.0.1, and it ran. However, I always get a message on my firefox start page saying: "you are not on the latest version of Firefox. But when I go to help and then on Firefox, it says I'm under 8.0 and I'm updating. Why do I get mixed messages?

    The old homepage www.google.com/firefox is obsolete and is no longer used. You can restore your home page for the new default value, so you will get the new homepage.

    http://support.Mozilla.com/en-us/KB/how%20To%20set%20The%20home%20page#w_restore-the-default-home-page

    Click on the button "Restore default".

  • Bug report: when you are debugging, script returns after adding a variable to spy.

    If you are in debug mode, and while the script is running, add a variable to the Watch window, the script resumes when you click OK.  You can use the code below, put a break on line 9.  Then add the variable k for a watch window.  Instead of just wait, the script continues.

    '-------------------------------------------------------------------------------
    
' - VBS script file
    
'-Created 22/01/2016 20:41:19
    
' - Author:
    
' - Comment:
    
'-------------------------------------------------------------------------------
    
Option Explicit  ' force explicit declaration of all variables in a script.
    
Dim i, k
    
I have = 5
    
For k = 0 to 1
    
  MsgBox (i + k)
    
Next

    Hi Russell;

    I just tried on a test with DIAdem 2014 SP1 machine and saw the same behavior as you. I couldn't find a way around the issue other than to add the variables before you start debugging or for updating the software to tiara 2015 in which the issue has been resolved.

    Kind regards

    Pedro M.

  • Error - installation of programs: Please do not power off your computer. Installation close this window when you are finished.

    Original title: need help for reinstalling Windows XP.

    I am selling my computer, so I wanted to wipe and use my CD resource Dell 4 to put the computer back to factory settings. I got through the four discs and Windows XP starts (House) as usual, but then appears a screen that says:

    "Installation of programs: Please do not power off your computer." Installation closes this window when you are finished' and it alternates between this message and: "this process could take up to 30 minutes to be completed."
    Flashed it between these two screens for over 48 hours now... As to what he is hanging on, I am at a loss? I have to restart it once (about 26 hours on the right) and she appeared with this same screen once again. Help, please!

    Hi Joesmommy99,

    If you have the Windows XP installation disk, you can restart the computer and then try to format & install Windows XP again and check if the problem persists.

    How to install or upgrade to Windows XP

    Reference: Install Windows XP

    Hope the helps of information.

    Please post back and we do know.

  • The battery on my Toshiba NB500 has not been charged since one should use it when you are connected to the power. The battery in the tool bar icon indicates charge but is always 0% available.

    The battery on my Toshiba NB500 has not been charged since one should use it when you are connected to the power. The battery in the tool bar icon indicates charge but is always 0% available. What could be the problem and how can I solve it?

    A problem better put to the support of Tosh or their forums, with regard to their equipment, not MS or Win

  • where to go on the site to download and install photoshop elements 12 and first 12 items have serial numbers, have downloaded once but did not find how to install.  When you are prompted do I click Run or save and product installed automatically.

    where to go on the site to download and install photoshop elements 12 and first 12?  Downloaded once but did not find how to install.  Have since uninstalled download.  I would like to start over.  When you are asked should I click 'Run' or 'save '?  I have serial numbers. Thank you.

    Download & install instructions https://forums.adobe.com/thread/2003339 can help

    -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

    Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

    To learn more go to these two links

    http://forums.Adobe.com/community/premiere_elements/content

    Community: Photoshop Elements | Adobe community

  • How can I reinstall Photoshop CS6 on my new computer when to enter my KEY I continually get the message "you are not connected to internet?

    I bought a new computer. I reinstalled my Photoshop CS6 leave a DVD, but when I entered the serial number I get the message "you are not connected to internet" while I was.  I have "pussy" with Naveen on customer support and after 20 minutes he told me to go to the following link and reinstall through it: http://www.adobe.com/sea/downloads/other-downloads.html


    This led to the same exact scenario only it took me over 2 hours to download CS6. I then contacted the 'Support Portal online' to ask for additional help. It was 2 days ago and I still have to be contacted and assisted with my problem. Any help or ideas out there?

    Here is what is in the file "hosts":

    127.0.0.1 localhost

    127.0.0.1 activate.adobe.com

    127.0.0.1 practivate.adobe.com

    127.0.0.1 ereg.adobe.com

    127.0.0.1 activate.wip3.adobe.com

    127.0.0.1 wip3.adobe.com

    127.0.0.1 3dns - 3.adobe.com

    127.0.0.1 3dns - 2.adobe.com

    127.0.0.1 adobe - dns.adobe.com

    127.0.0.1 adobe-dns - 2.adobe.com

    127.0.0.1 adobe-dns - 3.adobe.com

    127.0.0.1 ereg.wip3.adobe.com

    127.0.0.1 activate - sea.adobe.com

    127.0.0.1 wwis-dubc1 - vip60.adobe.com

    127.0.0.1 activate - sjc0.adobe.com

    127.0.0.1 lm.licenses.adobe.com

    127.0.0.1 192.150.14.69

    127.0.0.1 192.150.18.101

    127.0.0.1 192.150.18.108

    127.0.0.1 192.150.22.40

    127.0.0.1 192.150.8.100

    127.0.0.1 192.150.8.118

    127.0.0.1 209-34-83 - 73.ood.opsource .net

    127.0.0.1 3dns - 1.adobe.com

    127.0.0.1 3dns - 4.adobe.com

    127.0.0.1 3dns.adobe.com

    127.0.0.1 activate - sea.adobe.com

    127.0.0.1 activate.wip.adobe.com

    127.0.0.1 activate.wip1.adobe.com

    127.0.0.1 activate.wip2.adobe.com

    127.0.0.1 activate.wip4.adobe.com

    127.0.0.1 adobe-dns - 1.adobe.com

    127.0.0.1 adobe-dns - 2.adobe.com

    127.0.0.1 adobe-dns - 3.adobe.com

    127.0.0.1 adobe-dns - 4.adobe.com

    127.0.0.1 adobe - dns.adobe.com

    127.0.0.1 adobe.activate.com

    127.0.0.1 adobeereg.com

    127.0.0.1 crl.verisign.net

    127.0.0.1 ereg.wip.adobe.com

    127.0.0.1 ereg.wip1.adobe.com

    127.0.0.1 ereg.wip2.adobe.com

    127.0.0.1 ereg.wip3.adobe.com

    127.0.0.1 ereg.wip4.adobe.com

    127.0.0.1 hl2rcv.adobe.com

    127.0.0.1 ood.opsource.net

    127.0.0.1 practivate.adobe.ipp

    127.0.0.1 practivate.adobe.newoa

    127.0.0.1 practivate.adobe.ntp

    127.0.0.1 tss-geotrust - crl.thawte.com

    127.0.0.1 wip.adobe.com

    127.0.0.1 wip1.adobe.com

    127.0.0.1 wip2.adobe.com

    127.0.0.1 wip3.adobe.com

    127.0.0.1 wip4.adobe.com

  • I need to reinstall Adobe Creative Suite Production Premium on my computer, when you are prompted because it does not accept my serial number adobe, I bought my version in April of 2013, why the habit he accepts my serial number?

    Hi all, I have reinstall Adobe Creative Suite Production Premium on my computer, when you are prompted because it does not accept my serial number adobe, I bought my version in April of 2013, why the habit he accepts my serial number?

    Quickly find your serial number

    Error "serial number is not valid for this product". Creative Suite

Maybe you are looking for