Under certain conditions of popuId showPopupBehavior change

Similar Questions

• imaqReadAVIFrame retrieves the empty image under certain conditions?

  Hello

  I'm having a problem where imaqReadAVIFrame (.) is the white recovery (all black images) under certain conditions.  The conditions seem to be when the height of the AVI file is equal to or greater than the width and the height is an odd number.  AVI files created by using the various AVI NI Vision (IMAQ 4.6.1, IMAQdx 4.6.1) functions in an application created in CVI 2012 on a computer running Windows 7 64 bit.  AVI files use MJPEG compressor, and they play back fine in an external program like VLC or Windows Media Player.  Any ideas on what this could be?  My solution for now is to not to allow the creation of AVI files where the height is odd and equal to or greater than the width that is not a boring restriction, but it seems like there's something weird happens with imaqReadAVIFrame().  I can provide some AVI files if necessary, but they are 16 + MB each.

  TStanley,

  I managed to reproduce what you see with your .avi files in a program I wrote.  I built a LabVIEW program that creates an AVI file which can be saved to memory and then uses code from the example finder to read who created the file.  I build the file to your specifications at the height is greater than the width, and the height being an odd number of pixels.  Something interesting about this, however, is that it seems to be a point where an odd height is acceptable.  Once you go below the height of 291 pixels, any odd height then works.  The files that I used are written as read in LabVIEW, but that the configuration should be irrelevant because we are seeing the same issue.  In addition, LabVIEW and LabWindows CVI calling the same dll to actually set up the code.

  In this, I think this question arises from the nature of the way you compress the. AVI file.  If you are interested to read a bit more about it, a useful link can be found here:

  http://www.manifest-tech.com/media_pc/avi_formats.htm

  However, what I think is happening, is it that MJPEG file compression format translates into creating files that cannot be read by our software unless the height in pixels is a multiple of 2 or the size of the file is below a certain limit.  To fix that, there is a simple solution. Compress the file with any of the other compression methods available (DV video, Cinepak Codec, codec Intel IYUV, Microsoft RLE, Microsoft Video) and you will be able to open the file without the black screen.  This worked for me and should solve all your problems.  I hope this gives you a bit of insight.

  Kind regards

  Keith M

  Technical sales engineer

• Under certain conditions allow a Feedback

  We use integrated installation of APEX flow back. We love this feature but, we will only use it in development. Is that anyway, apart from the use of JavaScript to hide or remove the link, we can have this under certain conditions depending on the environment in which the application is running?

  I know we can go turn off in the properties of the Application, but we have a ton of environments and having to manually press this switch whenever get us a new version of the application becomes tedious. I expect something more by program / data driven. For example, is it possible to return this switch integrated with PL/SQL?

  Thank you

  -Joe

  Create a compilation Option. In the development environment has defined the status on Includeand by default on export to exclude.

  Apply the Option to build on the entry page and the navigation bar of your comments. When the application is imported into a different environment the comments link and the page will not be returned.

• Under certain conditions create script

  Hi, I want to put a redirect code in my stsytem to help, it is possible to build under certain conditions one < script type = "text/javascript" > tag?

  Any help would be great appricieated

  oooo and meta tags as well!

  You are wanting to add a Javascript within a topic and then conditionalise it so it appears only in some outings? If so, check out this part of the aid for the addition of scripts. Once it is in, you should be able to add a tag of conditional compilation to exclude required results.

  I'm not sure you can conditionalise however meta tags. Maybe if you elaborate a bit on what you're trying to reach.

• How can I add a page under certain conditions?

  Hello

  I'm trying to find a way to add a page to my form under certain conditions. I tried to create this sequel to 'action', but failed to locate the correct action.

  To sum up, I am trying to add a separate page to my existing form with instructions when a specific check box is selected. The separate page is text only and does not form any entries/field. Is there a relatively simple way to accomplish this task?

  You can enter the code in the script editor. If you do not show you can get it by pressing on (on PC) Ctrl + Shift + F5.

• Under certain conditions see the popup on page (fragment) charge

  Hi Experts,

  We have an obligation to show a popup on the page load, if a certain condition is true.

  I have two fragments (home.jsff and profile.jsff). Initially when the user login, home.jsff is indicated and that there should be no popup.

  When the user goes to profile.jsff and save the changes, it must first redirect to home.jsff and show a popup with the confirmation message.

  I can't create a fragment separated for the popup where we need to redirect to profile.jsff and then redirect to home.jsff as said the requirement that the popup should display the content of home.jsff in the background.

  Also I can't use showPopup behavior during the loading of the page because it's a jsff.

  Please suggest how to implement this.

  Thanks in advance.

  Best regards

  Saurabh

  ... There's an even simpler option

  1. Add a hidden from the fragment output text element

  2 bind the output components text 'value' property to a bean property of manage (pair of getter/setter)

  3. when the getter of the value method is called, check the indicator that you defined for if you want to display the context menu or not

  4. If the indicator is such that the popup needs to be displayed, run the Java Popup

  4.a search the component RichPopup

  4.b set flags of the popup

  4.c unset flag to display the pop-up window (for the next time you need to put it)

  4.d see the popup

  Frank

• hide the text label in the section report IR under certain conditions

  Hello
  We have a textlabel and a calculated field in a section of report to the IR 11.1.2.1. Is it possible (in a script) to hide the textlabel and field based on certain conditions, like for example, if the field computes to 'zero '?
  Thank you.

  Use a field instead of the text label. In the Expression Editor you can use the function if() {} else {}

  HTH

  Wayne

• Under certain conditions changing IMG link Standard report column

  Apex 4.0.2

  I have an application that includes photos of employees. I want to display a link to the column in a report of the employee who opens a page to manage the photos of a given employee. Worked well when using an image of compatible icon for all employees.

  But I want to do is have two images of icons. If a photo already exists. Another case a photo has not yet been added.

  I have included a select with the following CASE statement in the Source of my region.

  (CASE WHEN p.person_id IS NULL	THEN	IMG alt = "nophoto" src ="#WORKSPACE_IMAGES #nophoto.png" > "
  	ON THE OTHER	IMG alt = "photo" src ="#WORKSPACE_IMAGES #photo.png" > "
  	END) "PHOTO".

  I believe it works. I ran in SQL Developer, and it produces the following-

  < img alt = "photo" src = "#WORKSPACE_IMAGES #photo.png" >

  < img alt = "nophoto" src = "#WORKSPACE_IMAGES #nophoto.png" >

  I created a link to the column as a COLUMN of REPORT STANDARD. I put the TEXT of the LINK to #PHOTO #. I put the binding TARGET, PAGE and EMPTY the CACHE settings. The column displays as empty. Firebug shows an empty TD.

  I remove the binding TARGET settings, PAGE and CLEAR the cache. The img is displayed correctly. Firebug shows the < img > properly. But of course, it is therefore more a link.

  I'm doing something wrong here. But do not know what it is.

  Walt K wrote:

  Apex 4.0.2

  I have an application that includes photos of employees. I want to display a link to the column in a report of the employee who opens a page to manage the photos of a given employee. Worked well when using an image of compatible icon for all employees.

  But I want to do is have two images of icons. If a photo already exists. Another case a photo has not yet been added.

  I have included a select with the following CASE statement in the Source of my region.

  (CASE WHEN p.person_id IS NULL	THEN	''
  	ON THE OTHER	''
  	END) "PHOTO".

  I believe it works. I ran in SQL Developer, and it produces the following-

  

  I created a link to the column as a COLUMN of REPORT STANDARD. I put the TEXT of the LINK to #PHOTO #. I put the binding TARGET, PAGE and EMPTY the CACHE settings. The column displays as empty. Firebug shows an empty TD.

  I remove the binding TARGET settings, PAGE and CLEAR the cache. The img is displayed correctly. Firebug shows the correctly. But of course, it is therefore more a link.

  I'm doing something wrong here. But do not know what it is.

  That's because the behavior of standard report is to strip the HTML code of column values used in the expressions of HTML, links in the column and the report when the data is exported as CSV files. This is controlled by the attribute of HTML report of band, which by default is set to Yes. Change this setting to No. , and link images to be displayed.

  A solution with a better separation of concerns that are compatible with the Strip HTML and display text default settings is:

  1. Select only the image name in the query [ nvl2(p.person_id, 'photo', 'nophoto') photo is simpler than the previous CASE expression] and make this hidden column
  2. Add a link in the column to the State ('add column link' in the bar of tasks )
  3. Set the property of the new column binding Expression in HTML to
  4. Specify the column link attributes as required

  Last suggestion would be to display thumbnails of the photos used here where they exist rather than an arbitrary generic image...

• Color of the text label changing under certain conditions

  Hello

  I have these labels and I would like to change the color of the text IF the text has some specific value (from an XML created by a program); for example, the default text color is red, but if the text value is 'Yes', the text color should be green.

  Any help much appreciatted, as usual...

  Thank you.

  not sure, but you might be able to get away with something like this:

  
  http://www.Adobe.com/2006/mxml"layout ="absolute">
     
     
         

  public void changeColor(value:String):uint
  {
  If (value is 'Yes')
  {
  Return 0x007F00;
  }
  on the other
  {
  Return 0x7F0000;
  }
         
  }
             
  ]]>
     
     
     
         
         
         
     
     
  

  using a single label in a point renderer, passing through the "data.text" value

• Under certain conditions changing cell color in a dynamic array.

  I'm developing an application where I'd like to set the background color of a cell in a PivotTable based on the value of the cell content. I have two questions:
  
  the first is that when I use the following EL in the property of inlinestyle, I get the cell colored but not completely just the bottom of the text.
  
  < af:forEach elements = "#{bindings." Var MyView1.attributeDefs}' = 'def' >
  < af:column headerText = "#{bindings." MyView1.labels [def.name]}"id ="c1 ".
  attributeChangeListener = "#{backingBeanScope.backing_my.c1_attributeChangeListener} '"
  rowHeader = "true" >
  < af:outputText value = "#{row [def.name]}" id = 'ot1' "
  GT = inlineStyle "#{row [def.name] 10000?' background-color: Red;':"} "/ >
  < / af:column >
  < / af:forEach >
  
  the second issue is that I want to only apply it to all the columns after the first column have a valid numeric value. I get a NumberFormatException when a nonnumeric value is encountered. Thank you for your help... :)

  As always, you should mention your jdev version...
  You did not mention what you want in a different color. However you can test yourself with a normal component. Play with styles until you get the result you want. Then copy the inlineStyle into your dynamic table. The string can be very long, you be better off using a skin in the first place.

  You second problem cannot be handled only in a managed bean method. Call a method in a managed bean to check if the value of the cell is a number valid and then apply the style for the element.

  Assemble the two solutions, you end up with a method to a bean that checks the value and returns the inlinestyle or the styleclass string.

  Timo

• Can hide us a view particular criteria under certain conditions

  Hello

  In our application, we want to have multiple criteria of view that will be displayed in the query Panel and table of the JSF page. But the display criteria are controlled based on user roles.

  So we want to hide certain criteria of view for any particular user who should not use this criterion of the view. On the object view if we change a criterion for the view and go to UI tips tab there is a 'Show on list' option which when checked/unchecked will show/hide criteria in the saved search drop down. I want to do the same thing programmatically based on condition.

  I'm not find examples of it.

  If anyone has done this before or would help pointers examples or documentation.

  I use JDev - 11.1.2.4

  Thank you

  Finally found the solution to my requirement-

  How to hide the viewcriteria from the Panel of af: query | They show me the finger... again!

  Exactly what I was looking for.

• How to hide and reveal content under certain conditions?

  With the help of Acrobat X Pro.

  I have a load of text on a form I want to obfuscate in certain circumstances and to reveal to others.

  I tried to use a text box and put a script in the custom format field to switch between white and transparent fill colors, but it does not work reliably.

  In the meantime, I have a hack with a gazillion overlapping of checkboxes... but there must be a better way.  I can't change the underlying text for various reasons.

  Thanks in advance for any help.

  You can use several read-only buttons that all have the same name and can show/hide them all with a single statement by controlling their visibility:

  getField("cover").display = bYourVar? Display.visible: display.hidden;

  Where the "cover" is the name of the buttons and the bYourVar is a variable which is true when you want that text to be hidden and false when you want to the text to display.

  You can show/hide text by placing it on a separate layer (BCG) and control the visibility of the layer via JavaScript, but setting this up is not possible in this case, given your current constraints on editing.

• How to include a page with different orientation under certain conditions?

  Hi experts,

  
  I use BI Publisher included on EBS 12.2.4, and I need to print an invoice and conditionally add a page with a different orientation (portrait, rest pages are landscape).

  The condition is if TRX_TYPE = "ND".

  
  I realized to break the page (with a change of section) and call an auxiliary template (named cartaDevolucion) with the text on the last page:

  ------- this is ms word section jump (next page)
  <?import:file:///C:/tmp/XXSON_RETURNNOTE_LETTER.rtf?>
  
  <?if:TRX_TYPE='ND'?>
  <?call@cartaDevolucion?><?end call?> 
  <?end if?>
  

  My problem is that if the condition evaluates to false, the last page is strill printed in white.

  Any recommendations?

  Thank you
  Jose.

  Hello

  I solved the problem. I was missing the key word "@section":

  Thanks a lot for your help Alex. I'll keep your Xpath comment in mind.

  Kind regards

  Jose.

• Under certain conditions, update a table based on the comparison with a SQL statement

  I have a table (table 1) that has 4 columns:
  
  UID. THE NEST | VALUE1 | VALUE2
  
  I have another statement SQL (STMT) that returns the 3 columns of a few other tables:
  
  UID. THE NEST | VALUE1
  
  Now this is the condition of the way in which I want to put up-to-date TABLE1:
  
  First, to compare a pair of UID and PID of STMT with those in TABLE1,
  
  -1, for any new pair UID and PID not in TABLE1, insert a new line of STMT in TABLE1 set TABLE1. Value2 = 0 (I already did this).
  
  2, for an existing UID and PID pair in STMT and TABLE1, do:
  
  a. in TABLE1. Value2 > 0, update TABLE1. VALUE1 = STMT. VALUE1
  
  b. to TABLE1. Value2 = 0 and if TABLE1. VALUE1! = STMT. Value1, update of TABLE1. VALUE1 = STMT. Value1, otherwise nothing to do.
  
  I can't seem to come with a solution for condition 2. Any help is appreciated!

  Hello

  Here's one way:

  MERGE INTO  table1  dst
  USING          (
               SELECT  ...   -- your stmt query goes here
           )   src
  ON         (    src.uid  = dst.uid
           AND      src.pid  = dst.pid
           )
  WHEN MATCHED THEN UPDATE
  SET           dst.value1 = CASE
                                 WHEN   dst.value2 > 0
                      OR     (   dst.value2 = 0
                           AND dst.calue1 != src.value1
                      )
                      THEN   src.value1
                             END
  WHERE   dst.value2 > 0
  OR (    dst.value2 = 0
     AND  dst.calue1 != src.value1
     )
  ;
  

  This assumes that the combination (uid, pid) is unique in stmt. It doesn't have to be unique in table1.

  sb92075 wrote:

  -1, for any new pair UID and PID not in TABLE1, insert a new line of STMT in TABLE1 set TABLE1. Value2 = 0 (I already did this).

  FUSION could also do parts 1 and 2 together, in the same statement.

  2, for an existing UID and PID pair in STMT and TABLE1, do:

  a. in TABLE1. Value2 > 0, update TABLE1. VALUE1 = STMT. VALUE1

  b. to TABLE1. Value2 = 0 and if TABLE1. VALUE1! = STMT. Value1, update of TABLE1. VALUE1 = STMT. Value1, otherwise nothing to do.

  Why are they not simply your needs ' uid and pid that already exist in stmt and table1, if table1.value2 > = 0, then the value table1.value1 = stmt.value1 "? Are you concerned about shooting triggers unnecessarily? It has something to do with null values? The MERGE statement above does exactly what you asked, but, depending on your needs, something simpler and more efficient could do it as well.

  I hope that answers your question.
  If not, post a small example data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and also publish outcomes from these data.
  If you ask on a DML statement, such as UPDATE, the sample data will be the content of the or the tables before the DML, and the results will be the State of the or the tables changed when it's all over.
  Explain, using specific examples, how you get these results from these data.
  Always tell what version of Oracle you are using.
  See the FAQ forum {message identifier: = 9360002}

  Published by: Frank Kulash, June 6, 2012 14:51

• Under certain conditions add value in table

  Hi all

  I have two tables 2D of the string data in my VI (taken from the .mdb using ADO & SQL file). The "Window list" table on the left, that's what I want to add values to. The 'List of glass' table on the right contains the values that I want to add to the main table according to the values in other cells.

  For example:

  1 component ID window are 2191 and 2001. Under the thickness of the component 1/component 2 in the table "window list", I would add the thickness appropriate for stream ID 2191 and 2001 table "list of glass".

  Here's a snip of the two tables in question.

  This should be simple enough, but as I am a rookie LV I am not very well how to do.

  Thank you very much

  Laura

  

  Joint must be what you want.  Let me know if you have any other questions.