Understand the _definst_ folder, I need details please

Similar Questions

• Windows 7 64 bit worked very well and when was time to save I get the cyclic redundancy check, I try several times and made the same thing I need help please

  worked very well and when was time to save I get the cyclic redundancy check, I try several times and made the same thing I need help please

  Hello Hans,.

  Thanks for choosing Microsoft Community!

  According to the description of the problem, you have problems when you use the backup on Windows 8 feature.

  Please answer these questions to better understand the issue and help you:

  1. are - what you're talking to backup and restore functionality on Windows 7?

  2 have you made any changes to the computer before the show?

  It is perhaps to cause bad sectors on the hard drive, run the disk check to repair bad sectors

  Check your hard drive for errors:

  http://Windows.Microsoft.com/en-us/Windows7/check-your-hard-disk-for-errors

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  For more information:

  Backup and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions

  Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.

• Uninstalled all of the Documents folder - desperately need help

  Let me give you some information on this problem.

  I started trying to install a PC game on my computer, and it was recommended that I have a place outside of C:/Program Files, because Vista has been having administrative access errors and prevent the game to patch automatically. So, I chose to install it in the Documents, because I have a few other games installed in the Documents for various reasons. Well, by typing the path of the file, I typed the following text:

  Games\Documents of C:\Users\the contact

  I forgot to also add the folder with the name of the game to the end to give all the files that would be settled in their own folder. Therefore, I checked my Documents folder when I started to try to patch the game, and the game files were sitting just individually in the Documents and not their own folder. Rather than collect all the files and make a folder for them manually, I thought, forget it, I'll just uninstall and reinstall once more then this is a quick installation, this time by adding a folder for the files in the Documents folder. (that is, C:\Users\the boyfriend games\Documents\Europa Universalis III).

  So I started to uninstall it, everything worked, not reinstalled, no problem, although I noticed when I tried to install it in the Documents there was no other... strange subfolders. It installed very well and as I started patching the game even once, I went to the Documents, and Documents My horrifying discovery, was empty except for the folder of the game I did.

  I realized it happened instantly. When I choose "Uninstall" the game again, he chose to uninstall all the contents of the folder they have been stored in... sense to uninstall all files in 'Documents,' some other games, irreplaceable images and documents from the school.

  If you have stuck with me this far, I thank you. My question can be summed up by asking, what can I do to get all the files in the Documents that uninstalled? My basket is empty, but I didn't since this discovery other type of this message. I have not the computer shuts down automatically, installed another thing I understand is crucial in data recovery. Reliable, free software is one that can recover the data for me? I'll have to dig through the Interior edges of my computer files? Please answer as soon as possible and to help me, I lost a lot of irreplaceable data and not just "delete" and "empty trash".

  Thanks a lot in advance and have a nice day.

  You've done well not to do anything else on the computer since the discovery of the problem.  Which will maximize the chances of recovering your files.

  Download and run a program like Recuva file recovery.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• I did the error page numbering; need help please

  CS4 IND, win7. I have a file with the pump and the price of parts and another with a fair price for parts. Starting price on page 1 of the pump (the cover page, the left side of page 2... etc.) up to page 48. Similar agreement with parts price file. Today I created a book file, so I can make a pdf and search for the reference numbers in the two files and make sure that they have the same price in both files. Now, I have discovered that the second file (price of parts) in the book begins its numbering of pages to 50. I want to be like the first file numbering page. (like before I did this book file.) I dibbed in absolute numbering of the sections and make me lost and frustrated. How can I get the things as they were before? Help, please.

  In the 'book page numbering options' accessible via the menu:

  

  Uncheck the box that says automatically update section and page numbers.

  

• Pavilion hp15 mobile ts: pwd admin system off 96832342 in the bios... need help please

  What a mess!

  Please try: 29790984

  Kind regards

  KNRK

  I work for HP

• Need help to understand the network of vSphere environment

  Hello

  I need your help in understanding the network environment in vSphere. Please see the diagram and the text below:

  

  NIC #1 - Management Port (access from client vsphere, vCenter server)

  NIC #2 - Port of VMkernal (for iSCSI, vMotion, etc.)

  NIC #3 -?

  #4 – CARTE NETWORK INTERFACE?

  Q1 how allow external users to access services over the ESX host? (for example, IIS, FTP, Exchange, NFS)

  Q2, what will be the role of the other two network cards? Is it connected to the physical switch?

  * Ask you all to please help me by sharing your knowledge / experience on the network portion, you have made in your environment as NIC how, what to do with that. *

  I really need to understand the networking of concepts in vSphere, hope that your help!

  
  

  Best regards: Yash

  With an additional NIC with 2 port a general configuration might look like this:

  vSwitch0 - vmnic0, vmnic1 (connected to different physical switches)

  Network VMkernel management

  VMotion VMkernel network (own IP network, own VLAN)

  Better if they is configured as active / standby.

  vSwitch1 - vmnic2, vmnic3 (connected to different physical switches)

  Trade VM

  vSwitch2 - vmnic4, vmnic5 (connected to different physical switches)

  VMkernel iSCSI (own IP network, own VLAN)

  Ideal if it is added to the component Multipath iSCSI, which is quite easy to vSphere 5.

• Open g vi in the project folder

  If I used a few open g vi and I want to include these vi in my project folder, so that all my vi are under the same folder.  What is the best way to achieve this?  What I have to do a source distribution?

  jyang72211 wrote:

  If all screws are understand the same folder if the folder is moved to another location, it contains everything that a program was needed and no need to install anything.  I saw this fact, and I probably won't "do this, but I wonder what is the best way.

  The best way is to have OpenG installed on each machine of LabVIEW development worldwide... good well maybe a little high hopes.

  I understand the desire to have easy transport and having only one folder with all that it makes it easy for you.  But I have to recommend what others have suggested.  If you have a Bachelor of VIPM it makes it easier because you can perform a check, have it analyzed what packages use a project and roll them all into a single file.  Then when you want to move your project, you take your screws and record this file to a configuration (VIPC) and after installation the VIPC you can open your code and have it all to not be wiped out.

• location of the journal folder of ODI odi agent installed in weblogic server 11g

  I installed odi in a weblogic server. So, I use a Java EE officer. Workload ODI newspapers get generated in the agent folder. Could you please tell me the location of the folder of the agent in this situation.  The ODI 11 g is used for BI Oracle 11.1.1.8.1 applications.

  Hi 2782749,

  I think BI Apps use FOAD: http://docs.oracle.com/cd/E25178_01/core.1111/e10105/logs.htm

  But I think really that it would be easier to retrieve the result of the execution of the repository.

  What are your needs?

  Do not forget to close your other topics (comparison of interfaces, email exception, several master repository, the ETL statistics,...)

  Kind regards

  JeromeFr

• guys I need help last night I tried to install alcapitan update of my macbook pro, but it did not work and it make me an installation message you cannot be finshed I need help please

  The guys that I need help please,

  Last night I tried to install the update to alcapitan to my macbook pro, but it does not work it makes me a message (your installation cannot be finshed) and many many things and when I try to strt my macbook still keeps it install the updat and then get the message again...

  I need help please

  Hello, check if the mac you can use El Capitan. See the information update of OS X El Capitan - Apple Support here

• Disk space used by the Windows folder

  Hi guys I found that my windows folder takes a lot of my disk space. It takes 31 GB of my C: / drive... .and I saw on other computers just 15 and 16 GB of disk space. I also found that Winsxs is taking up to 18 GB 31 GB of the windows folder. Can you please tell me what can I do for this problem all...

  Investigating disk space use to download, install and run Treesize (freeware) as an administrator.

  http://www.Jam-software.com/treesize_free/

  Place a Treesize shortcut on your desktop, right-click on the icon and select run as administrator to open Treesize. You must run as administrator to see all the files. If you do not see the content of the System Volume Information folder you have not run Treesize as administrator.

  Information about Treesize

  http://www.Jam-software.com/treesize_free/

  When you open Treesize scan select in the Menu and you will see a list of drives. Click on C and it will generate a list of files. Display the names and sizes of the larger 6 under windows folders.

• Need help to understand why my downloaded PDF doc displays "Please wait...". If this message is not finally replaced with the appropriate content... "after that I have already downloaded the version update for windows 10

  Need help to understand why my downloaded PDF doc displays "Please wait...". If this message is not finally replaced with the appropriate content... "after that I have already downloaded the version update for windows 10

  This is because the PDF file is not be open in Acrobat or Reader, but by the browser which is unable to handle the specific PDF content.

  If you use Firefox or Chrome, follow these steps: https://helpx.adobe.com/livecycle/kb/xfa-forms-firefox-chrome.html

• Windows XP SP3, corrupted registry. Corrupt / missing windows system32\config\system - restore via Recovery Console cannot copy files of origin of the system32 folder. Please help.

  When my husband's computer was incorrectly stop we met the ' Windows XP didn't start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM "error message. I understand that the registry is written on the judgment and that it is not rare that the registry damaged during the power failure or abnormal stop. Checking the bandages for details on how to proceed, and begin the process of recovery appearing in theArticle ID: 307545 of http://support.microsoft.com/kb/307545/en-us below:

  «First part in the first part, you start the Recovery Console, create a temporary folder, back up the existing registry files to a new location, delete the registry from their existing location files and then copy the registry files in the repair folder to the folder System32\Config.» When you have completed this procedure, a registry is created that you can use to start Windows XP. This registry was created and saved during the initial setup of Windows XP. Therefore, any changes and settings that took place after Setup has finished are lost.

  The full, first part, follow these steps:

  1. Insert the diskette of starting Windows XP in the floppy drive, or insert the Windows XP CD into the CD-ROM drive and restart the computer.
     Click to select all of the options required to start the computer from the CD-ROM drive if you are prompted to do so.
  2. When the "Welcome" screen appears, press R to start the Recovery Console.
  3. If you have a dual-boot or multiboot, select the installation that you want to access from the Recovery Console.
  4. When you are prompted to do so, type the administrator password. If the administrator password is blank, just press ENTER.
  5. At the Recovery Console prompt, type the following lines, pressing ENTER after you type each line:
     MD tmp
     copy c:\windows\system32\config\system c:\windows\tmp\system.bak
     copy c:\windows\system32\config\software c:\windows\tmp\software.bak
     Copy c:\windows\system32\config\sam c:\windows\tmp\sam.bak
     copy c:\windows\system32\config\security c:\windows\tmp\security.bak
     Copy c:\windows\system32\config\default c:\windows\tmp\default.bak.

  There was no administrator password prompt, but the console began without incident. I was unable to copy these files to a folder. (Yes, I checked my spelling and made certain that the commands, parameters and syntax are accurate.) I created another directory and tested the console by copying the files to repair to the secondary directory. These copied without any errors. I was able to discern that there are no problems with the console itself.  At this point, I'm not sure how to proceed.  There is data that has not yet been backed up and must be recovered where it is suggested to do a new/factory install. Therefore, I need to know if there is another way to proceed to the recovery or if I do a fresh install. In addition, any suggestions on its disk data recovery, if the new installation is the only way to move forward, also would be appreciated. Thank you.

  Just to be clear, when you have tried, for example, to run this command:

  copy c:\windows\system32\config\system c:\windows\tmp\system.bak

  You have an error message (please report it to full) or maybe nothing happened.

  But you did another directory (say 'c:\windows\otherdir') managed by running the following command:

  Copy c:\windows\repair\system c:\windows\otherdir\system

  If this is the situation in which you are in, you are essentially impossible to create a backup copy of the current registry damaged.  This is not the end of the world, because as you can see by reading the full article, you never use these files master anyway.  This step is just included "on the side of caution" so that you can restore the original registry files, corrupted, if for some reason you wanted to.

  Because you cannot start the system anyway, you might as well begin the process described in the article without creating these master files.

  You can either make the step remove first:

  delete c:\windows\system32\config\system

  or just try to copy the files in the directory of repair on the files in the \system32\config directory and answer 'Yes' when asked if you want to replace the existing file.

  Note that the success of this procedure assumes that you run the system restore.  Otherwise, you'll find yourself with the registry as there was when Windows installation - which certainly won't be compatible with the State of your machine today.

  Essentially, what you are doing are the following:

  1. While in the Recovery Console, restore the registry to its state when you first installed Windows.  This allows you to start Windows - but do not try to use any application program.

  2. in Windows, copy of the registry that is saved in a recent restore Point to a location that are accessible by the Recovery Console - but not by using the restore application from the system itself, because with the 'original' registry, System Restore is not aware of these restore points.

  3. While in the Recovery Console, restore the registry using the files you made available at step 2.

  I don't really know what's the point of the stage of section 4, unless it is to use system restore to restore to a different restore point.

  If you can't make things work by following the steps above, or if there is no recent restore points to use in step 2, then you are correct: you must backup your data, do a clean reinstall of Windows, then reinstall your applications with original media and restore your data from backup.

  If you are able to do step 1 and start Windows with its original register, you should be able to use the native Windows tools to backup your data.  I would not use NTBackup, but rather just copy (do not use the 'move' command) data on an external hard drive.  Alternately, you could boot from a live CD of Linux (for example, Knoppix) to access your drive and copy the data.  Or if you have a bootable CD from a like Acronis Disk Imaging application, you can use it.  If you would like more information in this sense, after return.

• RELOADED Firefox and now I can't the Outlook calendar to give me "Notifications" when the appts/tasks are due. Please help as I need this bad function!

  Not much more to add. I did a restore to an earlier time and still no joy. I am at a loss. I'm not at all a totally intuitive computer person, just know enough to get in trbl. That's why I stay away from most things that require me to make Judgment calls. However, it was a black and white decision and now I can't get an important aspect of my Outlook calendar to work - Help please!

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
  • Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  The report please come back shortly.

• on Windows pc, I don't see a folder 'My Photo Stream', I think that all the photos are in the download folder, but when remove it from there, the status is not replicated in icloud. Help, please.

  on Windows pc, I don't see a folder 'My Photo Stream', I think that all the photos are in the download folder, but when remove it from there, the status is not replicated in icloud. Help, please.

  Hi vibenas,

  If you plan to use iCloud photo library with your Windows PC, article below the setting Details link and use this feature.

  Set up and use iCloud photo library on your Windows PC
  https://support.Apple.com/en-us/HT205323

  Sincerely

• Tecra PT634E A50 - need details on the SATA controller

  Hello

  I am looking for detailed specifications of Toshiba Tecra A50 (PT634E-00800JPL).
  I need to know what the internal port SATA version.
  What is SATA II or SATA III?

  I want to change the SSD hard drive and buy the most appropriate.

  Install the software of diagnosis equipment freeware like Sisoft SANDRA, Everest Home Edition or HWiNFO32.

  These tools provide you with all the essential information on the integrated parts and the HARD disk controller.

  Please post feedback would be interesting to know what details SATA controller would be declared by these tools.