Understand the text box

Similar Questions

• Reorganization of the text boxes so that they mix upwards or downwards

  Hello

  I'm not sure to understand what happens when the text inline boxes are dragged - I have 6 on a page that are the width of the page but different heights and I would like to re - order them so they mix it up or down depending on where I drag them, but at the moment they go to the bottom of the page or disappear completely I can't work on the behavior.

  I think there must be a way of formatting.

  Thank you

  James

  Select each text box and if you use v5 Pages, visit the reorder menu and text wrapping set to None. Now, the text box are not repellent, and you can position them as you please. If you always use the Pages ' 09 and then again, select each text box and the Wrap Inspector, deselect object causes wrap.

• How to make a 'active' phone number in the text box?

  I'm testing in 10.1 and 10.2, using the following QML simulators.  What I'm trying to understand is that 'rules' the text box used to set the active text, including phone numbers.  All I'm trying to do is to put a phone number in the text box that my users the opportunity to click on it to the phone.  But I can't make it work, or more exactly, may not get the phone number to become active.  .

  As you can see that I tried a variety of number formats, some specific UK because I was afraid that he may use country specific recognition, but nothing I try works.

  On the other hand the address which I also put in the TextArea is 'hot' and started the map.

  FYI, the client is running in Canada on Q10s using 10.1.  The numbers are also completely fictitious, if they work, then that is a stroke of luck.

                  TextArea {
                      inputMode: TextAreaInputMode.Text
                      editable: false
                      content.flags: TextContentFlag.ActiveText
                      text: "#123 1234, #123-1234  ph: 780-784-1231. ph: (403)218-1248. ph: 403-242-1231. ph: (01637)123456. 81 Street NE, # 101 ,, Calgary. "
                  }
  

  I saw this:

  http://supportforums.BlackBerry.com/T5/native-development/textarea-showing-quot-phone-numbers-quot/m...

  I was expecting that I didn't set the attributes for the text using C box.

  And I don't have permissions phone - eslewhere in the application that I detect when the user is on the phone.

  Any ideas on how I could get a phone number in a TextArea to be active, would be appreciated.

  Well, for what it's worth here's what I get with your data :

  

• How can I view the dimensions of the text boxes?

  The MUSE toolbar (if it is the correct name for it) to view the size - width and height of the text boxes, while I was working on page layout. This is very important with presentations of several columns that are not complying with the grid column - what types of old school like me know that * measures. (Not a description of PC, but that's what they were called in the publishing at least the last 50 years).

  Watch the presentation of my website http://www.londonsriver.com and you'll see what I mean.

  But in the latest version, that happened the next day - it disappeared. It shows the coordinates X and Y, so I can see where is the box (not that I really care). But it does not show the DIMENSIONS which is what I want. They used to be next to the coordinates on the toolbar or Ribbon or whatever this is.

  Am I missing something? I tried several options, but they do not appear. I may be stupid, but I want to just my rear dimensions. Bypass it is laborious: make the first box of the column, and then draw another box above it, and then drag on the second position. And so on. And very tedious if I already have two or three columns of text on a page that I re - works. What should I do? Guess? If they are "similar" to Muse they will even when the site is updated?

  I don't even begin to understand what many new features are Muse - perhaps one day I'll have the time to learn. Maybe my site is boring, but I come from the world of newspapers, is what it is and I know how to do. I want to just my size back!

  Thank you. And by the way, many thanks to all those involved in invent, develop, and deliver the Muse. I can now create pages in minutes, using the same basic page design and modification of the skills that I used for years - instead of living the demimonde of techspeak and coding where another website, construction tools wanted to take me!

  Have a look here:

  I don't get width and height of the menu options

• CS6 inDesign when the text box is set it is not adapt the text with it

  Hi Adobe community.

  In the past, I have been using Adobe CS5.5 and when you use Indesign I would like to make a text box, text entry and when I need the text box to be narrower, as I'm adjusting the box with the text selection tool would be admissible and move and adjust to fit within the box like you were changing the text box. So, you could see the text as you did the box around it more small.

  Now, I just went to do the same in InDesign CS6 but when move the text box, it simply moves the text and the text moves with it (do not meet with setting the text box), so I'm left guessing where the text will be sitting and it provides a few going until she I understand...

  So what I am asking, is there a box I need check preferences or something in CS6 so that text moves I adjust its bounding box, as it moves in CS5.5?

  Please help because it really bugs me!

  Thank you

  Try to screen Live Edit/Preferences/Interface/design/immediate

• Why the text box is so weird?

  I'm trying to do something simple I have done a million times in Photoshop CS5 - create a text box with text inside. But something goes wrong and I can't quite understand it...

  Note that the text box is now much larger than the display text. I would like to make this text box as wide as guide aligned on the box 'Donate '.

  

  ... But when I pull the right handlebar average a bit, look at what is happening in the text:

  

  Any idea what's going on here?

  Maybe you have a withdrawal of right margin of the paragraph, as in this screenshot.

  

• text won't move correctly when the text box is moved, how to fix?

  Working with someone elses files and it seems that he has a setting enabled in his ID CS4 that we cannot understand.

  It has a text box with text on a document.  When you move the text box upward or down with the arrow keys, the box moves, but the text does not.  When you move upward or downward far enough, the text seeks to realign itself back in the box.  The best description of it is as if there is an invisible box above and below with wrapping turned on... but I know its nothing like that.  What is the cause?

  Looks like line up on the starting grid...

  Bring up the grid with view-> grids and Guides-> display base grille.

  Change the grid settings in Edit-> preferences-> grids

  In a paragraph style, go to the withdrawal and spacing to change the settings for alignment grid

  If your text has no style paragraph assigned... uh... uh... I have no idea how turn it off

• How the text box will automatically solve a margin decline (manuscript Prep)

  I'm trying to prepare a manuscript for self-publishing (what have I got myself?) and hit another wall.  After setting the margin of the 200 page manuscript (all 200 pages imported from MS Word doc as a text image area), I decided that I needed the smaller margins.  After that, I noticed that the words/text box has not been changed accordingly: the words overlap the new margins.  As a notice of InDesign/stupid, I can't understand a how do I get the text box to fit new, smaller margins of pages at the same time (and I believe there is a better way to manually edit each page individually).

  Advisor?  Any help appreciated.

  Cancellation: If you know a manuscript InDesign (subject doesn't matter) which is in the public domain, I'd like to have the link/location.  I could learn a lot from an example of 'real '.  Thanks in advance.

  If the document is not sufficiently complex already make a new document 1 page with correct and verified margins "master text frame. Taking command or control and passage click on the margin to release your text block. Empty all your text in the image. It will automatically add pages as needed and adjustments as it will be a snap. To work with InDesign, the way sounds are that you will pay with impatience.

  This article can help

  http://help.Adobe.com/en_US/InDesign/CS/using/WSa285fff53dea4f8617383751001ea8cb3f-6faaa.h tml

• Set the focus to the text box of the embedded NumericStepper control

  I have an application that requires I use NumericStepper edit control as ItemEditor of a DataGrid column.

  I have two problems that I can't seem to overcome, one being the result of the solution to another:

  (1) I need to instantiate the component NumericStepper during execution, because I don't ' know advance what columns it will require.  More important still, I need to specify default attributes (styles, min, max, width, etc.).  I can't understand how to specify these attributes other than in a .mxml file.  To handle this, I have crreated a component 'wrapper' that's an HBox with a NumericStepper inside her, and I can specify my attributes on the tag NumericStepper.

  (2) now that I did #1 above, although, when I click a DataGrid cell that uses this component editing, the editor comes back but the text box is NOT centered, which means that the user must click a second time if he wants to type a number.  It's very irritating, but I do not know how to manage the focus such as when my HBox-with-embedded-NumericStepper' control rises, it concentrates and its selected data, NumericStepper, just as the 'base' is.

  So, my questions are:

  (1) can I somehow assign property values to a standard when executing NumericStepper, so that I can avoid using my built-in custom control HBox?

  (2) how can I manage the focus so that when my control HBox is in place, the text box is selected and fucused?

  That sounds confusing, but I have a small program to demonstrate this.  The "QtyBad" column uses my own NumericStepper HBos-based and not to be put in the correct focus when activated.  The "QtyGood" column has demonstrated APPROPRIATE behavior, as exposed by the native NumericStepper component, but I can't specify additional attributes / s on this subject.

  Here are all of the program - called "DGNumStepperDemo" - here:

  DGNumStepperDemo.mxml

  <? XML version = "1.0" encoding = "utf-8"? >
  " < = xmlns:mx mx:Application ' http://www.Adobe.com/2006/MXML "layout ="absolute"creationComplete =" onInitialize () "> "
  < mx:Script source = "DGNumStepperDemo.as" / >
  < mx:DataGrid id = "dg1" editable = "true" top = "20" left = "20" width = "350" height = "124" >
  < / mx:DataGrid >
  < / mx:Application >

  DGNumStepperDemo.as

  
  

  ActionScript file
  Import mx.collections.ArrayCollection;
  Import mx.controls.DataGrid;
  Import mx.controls.dataGridClasses.DataGridColumn;
  //---------------------------------------------------------------------------------------- -------
  [bindable]
  private var gridData:ArrayCollection = new ArrayCollection([{Qty:0},{Qty:5},{Qty:10}]);

  private function onInitialize (): void
  {
  CDL of the var: Array = new Array();
  var dgc:DataGridColumn;

  DGC = new DataGridColumn ("QtyBad");
  dgc.dataField = "Qty";
  DGC. Width = 75;
  dgc.itemEditor = new ClassFactory (EditorDGNumericStepper);
  dgc.editorDataField = "value";
  cols.push (DGC);
  
  DGC = new DataGridColumn ("QtyGood");
  dgc.dataField = "Qty";
  DGC. Width = 75;
  dgc.itemEditor = new ClassFactory (mx.controls.NumericStepper);
  dgc.editorDataField = "value";
  cols.push (DGC);

  DG1. Columns = cols;
  DG1. DataProvider = gridData;
  }

  EditorDGNumericStepper.mxml

  <? XML version = "1.0" encoding = "utf-8"? >
  " < = xmlns:mx mx:HBox ' http://www.Adobe.com/2006/MXML ""4"verticalAlign ="middle"paddingRight ="4"paddingLeft = verticalScrollPolicy ="off"horizontalScrollPolicy ="off"> "
  < mx:Script >
  <! [CDATA]
  public function get value(): number {return itemQuantity.value ;}
  []] >
  < / mx:Script >
  < mx:NumericStepper id = "itemQuantity" value = "{data.". Qty}"minimum maximum ="0"="100"/ >
  < / mx:HBox >

  If anyone who bothers to run it, you can see what I mean about the focus problem in the QtyGood and QtyBad columns.

  Any help is appreciated!

  Quick response to the #2 is to change the EditorDGNumericStepper.mxml to the following:

  
  http://www.adobe.com/2006/mxml"
             verticalAlign="middle" paddingRight="4" paddingLeft="4"
             verticalScrollPolicy="off" horizontalScrollPolicy="off"
             creationComplete="focusManager.setFocus(itemQuantity)">
       
            
       
       
  
  

  The only thing I did was put the NumericStepper to 100% width so it fills the column like the standard NumericStepper and it looks a bit better and I added a creation complete event handler that sets the focus to the NumericStepper.  I tested it and it will be emphasis each time on it like a standard stepper.  There may be a more "preferred" way, but it's simple and effective.

  On the #1 question, you want to change the properties, styles, etc. of a NumericStepper standard once it has been added to the data grid?

• Read the text box.

  Hello

  I have no experience with custom or even Javascript actions, so, my request is probably a very easy to solve, I had no idea on how to achieve this.

  Basically, I have a slide in this slide, I have a text box (slide 1). I have another slide with a text box (slide 2). I would like to have the text box on the slide 2 to have the same exact text in the text box in slide 1. If I change the text in the text box on the slide 1, the other text box would inherit the text thereof.

  TLDR; How to set the area text 2 to have the same text as 1 text box in a tip action. Practically ' box 2 == the text box 1.

  Thanks in advance.

  Edit: I forgot to add, I am using Captivate 4.

  Hello, I'm not sure I understand your question straight, please could you give more details: something to do with the terminology. You talk about 'text areas' but in Captivate, there is text (added by the creator of the film) captions and text entry areas (where the user of the published movie will insert text).

  If you want the user to type text in a BER (text entry area) of slide 1 and have this entry on slide 2 in a text caption, you can do this:

  • Create a variable user (projects, Actions, the tab variable), e.g. vTekst (you are Dutch-speaking)?
  • create the TEB on slide 1 and associate it to the variable (in properties, Advanced tab)
  • on slide 2 create the text caption, select Variable to add to the formatting toolbar and add the created variable
  • which edition you will have the same text in the text of the legend (slide 2) car was introduced by the user via the TEB on slide 1.

  If you were talking about the legends of text on both blades, there is no simple way in CP (in Flash) to have an object (in this case the text of the legend) remaining for two slides, the only options are for the duration of the slide or project. But you can of course easily copy and paste the text in the legend.

  Later, tot

  Lilybiri

• Change the display of the text box

  I need to create a text box that only shows "*" when your typing but needs a correct answer of 1234. Try to make it look as real as the direct environment, I found a captivate module that does this, but the person who created left so I could ask him. Looking at the properties of the text box I can't understand how they have it just show that "*" and not what is actually typed.
  
  Any help would be most appreciated.
  
  Concerning
  Kevin

  Hi Kevin

  When you look at the properties of the text entry box, click the Options tab. Once you do this, you should see a check box labeled "Password". If you click to place a check mark here, everything that is typed is reflected to the user as an asterisk (*).

  I hope that helps a little... Rick

• You can change the font size using the form in the preview (not with the text box). Having also arrow drawing trouble in preview.

  You can change the font size using the form in the preview (not with the text box). Having also arrow drawing trouble in preview.

  What problems are you having with the arrow? You go to Tools-> annotate-> arrow and an arrow appears. Then you can drag around the head and tail to make it to the desired location.

  

• Drag and drop the text box color - pages

  Hello

  I just upgraded from Pages 09 to 5.6 Pages. Pages 09, if I did drag a color from the menu of color on a text box, it might change the color of the text. 5.6 pages this action changes the fill of the text box, not the color of the text. Is it possible to force the behavior of 09 to 5.6? I change the color of the text much more often than the color of the background of the text box.

  Thank you very much!

  Force the behavior of Pages ' 09 v5.6? Absolutely not.

  Pages ' 09 and v5 are entirely different applications and not surprisingly, they work differently also. In the Pages v5, fill, text and a text box border color come from different parts of the application, not a central color palette.

• the text box changes color when you type in a google search and the cursor and the text becomes invisible.

  When I open Firefox, a cursor appears in the search text box, but I have to click on it before I can enter text. When I click on the text box changes color (from teal'c white to a light color) and the slider and I type text is invisible.

  Which may be caused by protection of typing"Comcast constant guard.

  'Configure the Anti-keylogger settings'-> disable

  • [874709/questions/874709]
  • [870165/questions/870165]

• How to enter special characters/symbols (i.e. the degree character) in the text boxes?

  Not a problem/w Firefox - I was wondering if there is a way to enter the special characters and characters (not on the keyboard) in the text boxes? I remember that there is a keyboard sequence that activates a context menu allowing the single character/symbol entry. Thanks in advance, Allan.

  See:

  • http://en.Wikipedia.org/wiki/Windows_Alt_keycodes
  • http://en.Wikipedia.org/wiki/Character_Map