Computer is password protected. When I try to start it in safe mode, it is also password protected. Is it possible that I can bypass this password protection?

Similar Questions

• MY COMPUTER DOES NOT START, NOT EVEN WHEN YOU TRY TO PUT IT IN SAFE MODE, EVERYTHING GOES TO A BLACK SCREEN, PLEASE HELP ME!

  OK, so last night, my computer was freezing up so I held the power button down to turn off, I turned it back and he asks me if I want to start in safe or just normally.  I chose because it starts as usual, it's just sitting there, it goes through the motions as it will start but it never does, I went to sleep woke up to the top and all I have is a black screen with mouse pointer again, nothing has changed, the same things happen when I try to start it in safe mode.  I tried to get the disks it is came up with, but the computer seems to not even acknowledge that they were never inserted, I don't know what to do, can anyone help me, I'm sitting here on the laptop of my bf and I am interested in this black screen with the pointer of the mouse in the Middle, I don't know what to do...

  Hello

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I have an old computer running windows 98 when I try to start until you get a date checking DMI Pool error message failure boot ATAPI CD-Rom 07,08 what this mean and how can I solve this problem?

  I have an old computer running windows 98 when I try to start until you get a date checking DMI Pool error message failure boot ATAPI CD-Rom 07,08 what this mean and how can I solve this problem?

  I want to erase the hard drive and use it to install windows xp.

  From what I've read, it could be a number of things that went on the wall. Issue of dead hard drive, BIOS, peripheral USB plugged when starting, etc.

  Does not help, but could help to point you in the right direction...

• I have lot to save my adobe photoshop cs6, when I try it starts to load then stops and gives me the message "the activation system is not available at this time." What should I do if I continue to use my photoshop?

  can you help me register my creative suite premium adobe cs6?

  I have lot to save my adobe photoshop cs6, when I try it starts to load then stops and gives me the message "the activation system is not available at this time." What should I do if I continue to use my photoshop?

  Check your hosts file.

  help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• I have Acrobat 9.5 and when I try to create > pdf from a scanner, it shows an error "Adobe acrobat has stopped working". Is it possible that I can use this feature?

  I have Acrobat 9.5 and when I try to create > pdf from a scanner, it shows an error "Adobe acrobat has stopped working". Is it possible that I can use this feature?

  Providing you have Acrobat 9 installed in an operating system for which Acrobat 9 is compatible then you can use the feature.

  So, you need a scanner connected, turned on, and the software installed. Acrobat 9 "prefer" TWAIN drivers.

  Always visit the site of the provider of the Analyzer and download - install the latest version of the greatest software.

  n.b., The Acrobat 9.x product family moved in the middle of the "End of Support" year 2013.

  Thus, the family of products Acrobat 9.x is not compatible with contemporary operating systems.

  Be well...

• I recently bought adobe photoshop and Premier (2 a) for windows. My computer crashed and I can't use this product because I bought a new macbook. Is it possible that I can download this software on my mac or get a new product key?

  I recently bought adobe photoshop and Premier (2 a) for windows. My computer crashed and I can't use this product because I bought a new macbook. Is it possible that I can download this software on my mac or get a new product key?

  Hey Britney,

  Please visit the following link: a product of Adobe for another language or version of trading platform

  You can download the apps for MAC from here: Download Photoshop Elements | 14, 13, 12, 11, 10

  If you still need help contact our support Chat for the same thing: contact customer service

  *Remember to stay signed with your Adobe ID ( email id used to purchase the subscription ) before accessing the link above*.

  Let us know if that helps.

  Kind regards

  Sandrine Bani

• Just my computer was restored now when I try to start it, it says that I need but in the disk boot. I don't have a boot disk. What should I do?

  I got a virus and I had fixed my computer, but now whenever I try to start my computer it tells me that there is no device boot-able and for me to insert a boot disk, then press a button on any. Well, I looked through all the manuals and CD that came with the computer and not for the life of me, I can find a boot disk. It's an old unit, I bought it in 2005 and I've been using Windows XP. Then what should I do? Is there anyway to get a boot disk? Can I just buy a new form of program store like windows vista or windows 7? Please keep in mind and don't forget when you give inform me that I am unable to do anything with the tower. No internet access, no desktop, nothing, so that the download is not an option. It just starts and then tells me to put in a boot disk. So what I do/how can I remedy this? Thanks for the help!

  Hi Becca_459,

   

  1. who is the manufacturer of your computer?

  2. What is the exact error you get when you start your computer?

  I suggest you to check the computer's BIOS settings to make sure that BIOS lists and recognizes the hard disk. See the computer documentation or contact the manufacturer to find out how to check the BIOS settings.

  After you verify that the computer's BIOS detects the hard disk, restart the computer, and then test to determine if the problem is resolved.

  If the problem is not resolved, or if the computer's BIOS cannot detect the hard disk, you may have problems with your hardware. Contact the manufacturer to find out how to solve this problem

  NOTE: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from configuration can resolved BIOS/CMOS settings. Changes to settings are at your own risk.

  If it does not, you will need to contact the manufacture of equipment.

• you try to start windows in "safe" mode

  I have been instructed by my virus software provider to start my computer in "safe" mode They told me to press F8 and keep it pressed until the safe mode options. I tried this but it seems that the F8 key doesn't seem to be holding options that are "safe". All I get is my normal screen 'connect' where I get my password. I'm not computer literate, so any help would be grateful but make it easy to understand!

  I use Windows Vista Home Basic, and IE8. I use Avir Antivir anti-virus software

  Hi baz1941,

  In order to start using safe, you can consult the following links and see if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• can't get off computer safe mode and windows Explorer I have active log manually everytime how can solve this too google always redirects me ever time I click a link

  by widows Explorer, I hear my counter top and my screen shows just how safe in every corner and when I click on a link on facebook, he sends me somewhere like yellow pages or somewhere tottally not where I want as I can't install updates

  Hi, James.

  Restart the computer

  The Logo of the manufacturer, start tapping F8

  Select Mode safe mode with networking

  Download this tool and perform a full scan

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=16

  Difficulty hijacked browser

  http://www.Microsoft.com/security/PC-security/browser-hijacking.aspx

• that means xml, when I try to set up an analysis of the image years ago, I get the message that there are on this scan xml elements and if I save it, elments of xml will be cleared. What is

  When I bring up some old pictures on my computer, it comes like a scan, when I opened the scan he says he has xml elements, which, if I save it, the xml elements will be deleted, what are xml elements

  The normal definition of xml is the Extensible Markup Language and is the most used in the web development. There is no logical reason why scans contain xml in their breast.

  All files have an extension that is used by Windows to identify what program to use to open the file. Word uses .doc or .docx format, Excel .xls or .xlsx, Adobe uses .pdf etc.

  Right-click on one of the files and select Properties, in the general tab, it displays the type of file and its extension.

  You are referring to 'initials pvt' but pvt isn't a common file extension and is used by a couple of applications, but have nothing to do with analysis or graphics.

  Up to what you did what in fact do a copy files (copy the directory as a whole) and let the originals intact.

  Although Word works with graphics files which is not normally the native program to use, can you explain the steps that you use to open the files.

• I downloaded and used a test of Lightroom, several days ago.  I've used and have a library, but now, when I try to use it today, my pictures seem to be there in the library but when I try to start working on a new picture, I get a "file not found messages

  I downloaded and used a test of Lightroom, several days ago.  I've used and have a library, but now, when I try to use it today, my pictures seem to be there in the library but when I try to start working on a new picture, I get a ' file not found message.»  How can I go back in my files?

  There are a number of options available when you choose to import files to your catalog in Lightroom (library)

  1 copy / copy as DNG, this option allows you to copy files of origin from their existing location, for example a folder on an existing, promenade, internal, external, a reader of card or a camera SD card connected to the computer via a USB port, to a location of your choice, in a folder of a HARD internal, external HARD disk drive or a network drive on your choice.

  2. move. This option allows you to move files of origin of their location, for example a folder on an existing drive, internal or external to a new location of your choice, in a folder of a drive HARD internal, external HARD disk or a network drive on your choice. (the Move option you cannot move files from a card or your camera.)

  3. ADD., this option allows you to add image files to the catalog of their location, for example a folder on an existing drive, internal, external or network drive and the original images remain in their current location.

  The original image file will be located at the location of your choice.

  There are no image files in your catalog (or library) file the original files are in the location you choose.

  If you choose to add files to your catalog from an external drive, then unplug the player from your computer, then Lightroom which will show the 'file not found '.

• Firefox crashes when you try to start it

  My firefox browser started to plant about two days ago in the blue. I don't remember having installed a plugin or something like that day. When I try to start firefox it's blocking 2 seconds later and with a lot of luck I can do it again in safe mode. But most of the time, even in this case the browser crashes, which is very suspicious. Internet Explorer, however, works perfectly. But since I have not used for years, I want to stick to Mozilla.
  Thank you for any help.

  You have set as your homepage to Google? If you start Firefox Safe Mode, this problem goes away? Questions to troubleshoot Firefox in Safe Mode

  If so, try turning off hardware acceleration. Disabling hardware acceleration

• When I try to start the computer in the morning, he goes off and after trying to restart the computer 2 times it becomes normal. Please give me any solution for this.

  When I try to start the computer in the morning, he goes off and after trying to restart the computer 2 times it becomes normal. Please give me any solution for this.

  Hey Abdul HamidNagoor,

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         What is the brand and model of the computer?

  Follow the steps in the article.

  Advanced Troubleshooting for General startup problems in Windows XP

  If the problem persists, follow the steps in the article.

  How do I recover from a corrupted registry that prevents Windows XP startup

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

• ox800704ec error code when I try to start my computer

  When I try to start my computer to receive an error code that says: "Windows has encountered a critical problem and will restart automatically in one. Please save your work now. "This happens whenever I try to start. Can you help me with this?  Paul @ (deleted number).

  Hello Paul,

  1. what version of Windows is installed on the computer?

  2 have had any changes made to the computer before the show?

  3. what security software is installed on the computer?

  Try these steps and see if it helps.

  Note: The links below are applicable to the Windows Vista operating system and Windows 7.

  Method 1:

  Step 1: Safe Mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If the computer works fine in safe mode, and then follow step 2 and check.

  Step 2: Clean boot

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Please note: After troubleshooting, be sure to start your computer in normal mode by following step 7.

  Method 2:

  1 run a scan for viruses on the computer safe mode with networking to make sure that the computer is virus-free.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Safety Scanner WARNING: There could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  2. run the malware removal tool from Microsoft.

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  Hope this information is useful.

• When I try to access one of my email accounts via the butterfly, I get a message that the password that I entered is incorrect.

  Sign of butterfly MSN problem

  When I try to access one of my email accounts via the butterfly, I get a message that the password that I entered is incorrect. When I try to change the password, I get the message I tried too many times changing the password and that I should wait and try again. I waited weeks and tried again and I have the same problem. What should do?

  Thank you very much

  Gary Jones

  Hello
   
  As the problem you are having is with MSN, it would be best to contact MSN support for assistance.
  Support MSN: https://support.MSN.com/default.aspx?&St=1&wfxredirect=1
   
  And also see the following Microsoft article.
  How to contact MSN customer service: http://support.microsoft.com/kb/940784
   
  Hope the information is useful.