Understanding error '-200846' DIDO in Nibble mode

Similar Questions

• Get the Blue error screen when entering Sleep Mode

  Original title: BSOD

  I get BSOD a few times of the day when my computer enters "sleep".  I guess it is driver related but is unable to identify the culprit. I use BlueScreenView and on some files .dmp lists as the "caused by driver" ntkrnlpa.exe on others, it lists tcpip.sys.  Can I download files .dmp full if someone can give me an idea on how to solve this problem?  Thanks in advance.  Vista by the way.

  Hello

  BSOD CAUSE tcpip.sys which is a component of Windows that means something else, he drove in error.
  The question is usually the network drivers used and/or antivirus/antispyware/security programs.

  -----------------------------------------------------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

• Error-1074135024 with the sequence mode arbitrary two-channel on SMU-5451

  Hello

  I am trying to use both channels on my SMU-5451 and operate in arbitrary sequence mode.

  In the build step start, I get the error-1074135024:

  Possible reasons:
  Invalid value for the parameter or property.

  Attribute values are not similar in the channels or the specified features. Use a unique channel name or feature name to query the value.

  Unfortunately, I have no idea what parameter or property value causes the error.

  Initially, I tried this with my own VI, and I was able to run each channel individually, but could not get them both to operate simultaneously. As an attempt to troubleshooting Finally, I decided to change the example of arbitrary signals Fgen (Dual Channel) (which worked properly), to see if I could get it to work with arbitrary sequences. I still get the same error. I enclose modified VI, because it is quite a bit simpler than what I'm running.

  I'm under Labview 2012.0.1f3 (32-bit) on a Windows 7 Enterprise (64-bit) operating system.

  Thanks for any help you can offer on how to solve this problem!

  Bill

  So with the help of your VI I have figured out how to make it work.

  First of all, your VI I noticed that I should wire the specific channel, I just want to niFgen Create VI waveform, but not in VI of arbitrary sequence niFgen set up. For this I devrais either do not fill in the entrance of the channel, either entry "0.1". This gets rid of the original error message that prompted this post.

  Your VI works, but it seems to be designed to write on only one channel at a time. However, I noticed that if I run it with all the waveforms channel 0, change the waveforms to be on channel 1 and click load & sequence, waveforms will be correctly output channels 0 and 1.

  Finally, I worked on that the trick is to create an arbitrary sequence, so use the arbitrary Create Sequence niFgen and niFgen configuration arbitrary sequence screw, single-channel waveforms. Then run the niFgen Clear VI arbitrary memory, then create another arbitrary sequence for the other channel. After that, run the generation VI niFgen undertake. And everything works fine! I don't know why it is important to have clear memory arbitrary VI in the Middle, but it seems to be essential for this to work properly.

  I downloaded my VI relatively simple test that works properly with this arrangement.

  Thank you very much for your help.

• How to manage the runtime at the stage of PreUUT error when running in parallel mode

  I would like to run Test DUT in parallel mode, and some actions are made in PreUUT of this kind of reading serial number and control of the aircraft.
  The model of process don't goto PostUUT step when the runtime error occurs at the stage of PreUUT, so I would like to add a few things to check if error in the cleaning of the sequence and return to the configuration at PreUUT stage, but I think it's jumping all the actions of installation and the main stage?

  What should I do if I want to go back to run PreUUT again after the first run when the runtime error occurs?

  Or, is it a good way to handle this kind of error withour restart of the program?

  Bandaged,

  There is no decent way to do this. The reason is the following: TestStand assumes that failure in the facility to a unique testsocket mechanism, it is senseless to proceed with this testsocket at all. It is recommended to manage the routines of judgment in this case using the SequenceFilePostStepRuntimeError callback. You also can use this callback to execute a loop on the step that creates the error until the error is resolved.

  By default, TestStand does not support a tribute of the error but the proceedings concerning the execution of shots. You can just ignore the error (deletion of the error indicator) or you can implement your own features. For example, you can set a custom fault indicator which will be evaluated as a first step in your hand. If the flag is set, ignore you everything in your hand.

  I know that this suggestion seems not to be a good idea because it's 'hack mack', but it solves your problem. TestStand, as already the State evaluates the execution errors that occur in the PreUUT as to the deficiencies of the system and carry out any checks is not suggested.

  Norbert

• HP 15-g020dx: I got an error message "operating system Boot Mode changed."

  I had got an error message on the boot image and I came here, telling me to change the startup parameters to the legacy that I did, but I might be able to register the change because he could do nothing except "esc", which had to cancel the change type. What should I do?

  Hello

  When you change the boot mode and are then invited to enter a 4-digit PIN, there will be no display of the numbers that you type for security reasons - just type in the numbers and press ENTER.

  Kind regards

  DP - K

• Strange error with cRIO and scan Mode

  I'm scanning two modules cRIO on a controller of 9012 + 9112 bottom of basket 8 channels in scan mode, and I call the function 'read the Variable scanned '.

  I see this error, each a few scans:

  Error -2132869099 occurred at Property Node (arg 1) in PolymorphicModuleScan.vi:7->sampleData2.vi->ZDAQ_cRIO_Target_Main.vi
  
  Possible reason(s):
  
  LabVIEW:  (Hex 0x80DF0015) A deployment transaction is in progress.
  

  The search for this error on NI.com gives no help at all.  This is the first time I see this (I've been running this code for some time without error).  All software is since the dev of August 2011.

  Resolved: I was calling the function "Get the Period.VI of Scan" scan at 1 Hz.  This seems to have caused the 9205 (not the 9237) produce this error.

  I removed the call to the offending function and this has solved the problem,

• error unmouvable_boot_volume vista, no safe mode/cmd/recovery/windows install

  First of all, sorry for my English.

  If I get the BSOD loop, the error is unmouvable_boot_volume, I can not in safe mode or any mode, including the F8 options, I tried the recovery (windows vista and xp) cd, it does not, vista cd gets stuck with a black screen and a cursor (mouvable) white, so I can't even install windows because I get no option... xp cd works until it saids 'the hard drive was not detected' or something like that... but when I enter the BIOS, hard drive option is here... I don't know what to do, help me please!

  Hello

  See if this information helps you:

  https://NeoSmart.NET/wiki/unmountable-boot-volume/

  And you can also use this method to test your hard drive:

  "SeaTools for DOS.

  http://www.Seagate.com/support/downloads/SeaTools/

  "SeaTools for BACK tutorial.

  http://knowledge.Seagate.com/articles/en_US/FAQ/201271en

  See you soon.

• Error opening edge in edit mode in Essbase 11.1.2.3

  Hello

  I know this question has been asked by couple of people in this forum but no response specific to the EMP 11.1.2.3 issue.

  We are in the process of transition of 11.1.2.1 to 11.1.2.3 Hyperion planning environment, where I see the mistake of opening of contour essbase in edit mode.

  I am able to open in view mode but error - "there is a problem with the schema object, error in edit mode for locking

  I stop/start the application several times... no luck... also dropped and re-created essbase app to create and refresh planning but no luck.

  does anyone have a solution for this?

  Kind regards

  KP

  Take a look at error opening outline of the database in "Edit" mode: 'There is a problem with the locking of the schema object, error # 1 051 675' (Doc ID 1491030.1) to see if that helps.

  HTH-
  Jasmine

• XHTML validation - I don't understand error

  Hi all
  
  I created a site called www.monicawellsphotography.net
  
  I followed the method flash satay for flash movies, as well as dreameavers active content script - I tested my page, including validation and checked everything
  
  I also used the tool of validation on dreamweaver for my pages and everything seems to be ok on that. HOWEVER the w3c validation tool gives me an error that I don't know what to do about it-
  
  It is said
  
  1. error line 75 column 18: document type does not allow element "noscript" here; missing one of "object", "applet", "map", "iframe", "button", "ins", "del" start tag.
  < /script > < noscript > < object type = "application/x-shockwave-flash" data = "gallerycom".
  The mentioned element is not allowed to appear in the context in which you have dived the other elements mentioned are the only ones who are both allowed there and can contain the element mentioned. This may mean that you need a containing element, or maybe you have forgotten to close a previous element.
  A possible cause of this message is that you have attempted to put a block-level element (for example, '< p >' or '< table >') inside an element online (such as '< a >', "< span >", or "< font >").
  
  While I understand the words I do not understand how to solve this problem,
  
  Can anyone help with this?
  
  Best regards
  Lorna17

  Me once again

  Just found out what was the problem - I got a

  tag at the beginning and the end of it

  so please ignore this message

  Concerning
  Lorna17

• creation of error message in the query mode

  Hello experts,
  I want to create an error message in a mode of input query. Suppose I have a field date of birth and full data
  in the database in this fasion January 1, 2008.
  
  Suppose that in the mode of input query someone enter the value 01/01/2008.It is not an entry for the system. For this error, I want to create an error message.
  
  I wrote this code
  
  If: system.mode = "ENTER-QUERY" then
  If error_type = 'FRM' and error_code = 40358
  message ("Please enter date as 1 January 2008'");
  end if;
  end if;
  
  The trigger, I used is KEY - EXEQRY.but, it shows no error whenever I give an entry like 01/01/2008.
  
  
  can you please what wrong with the coding.
  
  Concerning
  Mehdi

  Yes, the trigger for the error.

  DECLARE
    err_code NUMBER := ERROR_CODE;
    err_type VARCHAR2(3) := ERROR_TYPE;
    msg VARCHAR2(2000) := ERROR_TEXT;
  BEGIN
    IF err_code = 40358 AND err_type = 'FRM' THEN
      message('please enter date as 01-jan-2008');
    ELSE
      message(err_type||'-'||to_char(err_code)||': '||msg);
    END IF;
  
    RAISE FORM_TRIGGER_FAILURE;
  END;
  

  The fact that the 'Fire in Enter Query Mode' option is set to Yes (palette property).

• Error 200320: SCXI-1001 Chassis - Mod 1502

  Hello.

  I'll put a SCXI-1001 chassis with several modules, 3 of them 1502 with their 1314 terminal blocks for the first time. I used this chassis before reading temperatures and worked fine, so I'm sure that the problem is me.

  I get this error 200320 on simultaneous sample and hold trying to acquire data of deformation, but I think that the configuration is fine. I'm still fairly new to LabView and have tried to check the installation by the Express data acquisition module and MAX; but I get the same result.

  Please help me to implement as soon as possible, I need your knowledge.

  Thank you

  usuario

  Hi user,

  You can learn the development of LabVIEW applications and data acquisition as shown in the following links:

  http://digital.NI.com/public.nsf/allkb/7D5F60ADBFD9CDC2862572BA005DD96A?OpenDocument

  http://zone.NI.com/DevZone/CDA/tut/p/ID/2835

  The latest links explains what a global virtual channel and a task.

  Regarding the shunt calibration, you can consult the following links:

  http://digital.NI.com/public.nsf/allkb/8D81F07FBCCB6DA186256BE6000691B3?OpenDocument

  http://digital.NI.com/public.nsf/allkb/286AC9A8DC0B689986256C2C0064B183?OpenDocument

  http://zone.NI.com/DevZone/CDA/tut/p/ID/3642

  You can open a new thread and forum to do not mix topics, that's my advice.

  Kind regards

  Jesus.

• XP does not start, get blue error screen, even in safe mode

  My PC with Windows XP worked but slowly. I have deleted some entries in the registry. I was unable to close the session. I rebooted and now even after using safe mode I end up with a blue screen with Windows XP on it and no button works! Any suggestions?

  Looks like you did some significant damage there.

  What is the brand and model of your PC? You have a Windows XP installation CD?

• Error message with nwiz.exe [mod nview.dll AppVer 6.13.10.3190 name] C:DOCUME~1\ADMINI~1\LOCALS~1\Temp\bdec_appcompat.txt

  Windows XP Pro, crashed, took shop, had to be wiped (cleared all updates for several years). Reloaded from the original disks. Added a few other updates since then. When turned on, get the error message and Web site NVIDIA Graphics Driver. I have download long, then a message that it's not compatible with my hardware. Why I get this now? It works, but I get this message every time I turn it on.

  Hello karenfedway,

  Thank you for visiting the Microsoft answers community.

  Try to uninstall then reinstall the Nvidia software.

  First of all, make sure you know material real th so that you can download the drivers and the correct software.

  -Click Start > Control Panel > Add Remove programs
  -Uninstall any software related to Nvidia

  Rebooting and using the Nvidia software for your hardware reinstall.

  Hope this helps

  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "Winword.EXE - bad image" "C:\Windows\system32\bitsprx532.dll is not designed to run on Windows or it contains an error. Try the program mode.

  Original title: 'Bad image 32 system error'

  Error window opens "Winword.EXE - bad image", "C:\Windows\system32\bitsprx532.dll is not designed to run on Windows or it contains an error. Try fashion program at new etc. etc."

  This happens at startup when programs open ie. audio and whenever I try to open a program, in this case MS Word. I click the OK button several times and he goes and allows me to work in the program.

  It seems that the C:\Windows\system32\bitsprx532.dll file is related to malware.  Examine for example the Uploader on VirusTotal.com and checking the results provided here.

  Scan your system with the free version of MalwareBytes AntiMalwareand see what it finds.

  Check with Sysinternals Autoruns for entry autostart referencing bitsprx532.dll and validate its location (in the autostart list).

• Blue screen error 0 x 00000044; "Kernel Mode Driver Framework Runtime"

  All,

  Using a laptop HP Pavilion Dv6 PC, AMD A6 - 4400M with graphics card Radeon HD 2.7 GHz, Win 7 Home preium 64-bit SP1. This stop occurs ONLY when I use 3 devices usb devices simultaeously and it can't immediately. Sometimes it is an hour and it is sometimes several hours before, it crashes. Now, there is an advanced course that control all usb devices, if that makes a difference or not. Can't never at any other time. I don't see a way you can attach files here so I pasted a copy of info crash "blue screen display.

  112114-17940 - 01.dmp 21/11/2014 12 h 06:35 MULTIPLE_IRP_COMPLETE_REQUESTS 0 x 00000044 fffffa80 '088e3a90 00000000' 00000eae 00000000'00000000 00000000'00000000 Wdf01000.sys Wdf01000.sys + 98ba0 Kernel Mode Driver Framework Runtime Microsoft® Windows® operating system Microsoft Corporation 1.11.9200.16384 (win8_rtm.120725 - 1247) x 64 ntoskrnl.exe + 75bc0 C:\Windows\Minidump\112114-17940-01.dmp 2 15 7601 275 896 21/11/2014 12:25:20 AM

  "ntoskrnl.exe ntoskrnl.exe + 5e8c0 fffff800 ' 0344 c 000 fffff800 ' 03 a 31000 0x005e5000 0x53b9f073 06/07/2014 5:57:23 PM system Microsoft® Windows® NT Kernel operating system & 6.1.7601.18526 (win7sp1_gdr.140706 - 1506) Microsoft Corporation C:\Windows\system32\ntoskrnl.exe
  "Wdf01000.sys Wdf01000.sys + 98ba0 fffff880 ' 00 c 00000 fffff880 ' 00cc2000 0x000c2000 0x51c51641 21/06/2013 8:13:05 PM Microsoft® Windows® operating system Kernel Mode Driver Framework Runtime 1.11.9200.16384 (win8_rtm.120725 - 1247) Microsoft Corporation C:\Windows\system32\drivers\Wdf01000.sys

  Thank you

  Dave

  Astrodoc

  Now, they do not specify a driver.  Run the Driver Verifier to determine the underlying cause.  I suspect that it's always the same driver.

  These accidents were related to the corruption of memory (probably caused by a driver).

  Please run these tests to check your memory and find which driver is causing the problem.

  
  

  If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

  
  

  Since then, it is more likely to be a pilot run everything first.

  1-Driver Verifier (for full instructions, see our wiki here)

  
  

  If the auditor does not have the issue we move to it.

  2-Memtest. (You can learn more about running memtest here)

  
  

  If you cannot start after you have enabled the auditor reboot in safe mode

  In Vista & win 7 (F8)

  In 8 victory & Win 10 http://www.howtogeek.com/107511/how-to-boot-into-safe-mode-on-Windows-8-the-easy-way/

  
  

  Co-written by JMH3143

  .