undo the groups for changes in the user interface
Hello guys,.
Is it possible to use groups of cancellation to make the changes that the user creates in Panel by me?
Let's suppose I have create a window Panel / were the user can fill some EditText, select the items in a TreeView, etc.. Is it possible that I can use cancel groups for this change?
Thank you
Francine
ScriptUI does not provide this feature natively.
But you can add several addEventListener() and write all changes to recover, then file txt them.
Tags: After Effects
Similar Questions
-
How can I change the language of the user interface for my trial version of Illustrator CS6?
I don't know why, but I had the Danish, English or Dutch version would be nice.
Re-download the package in the correct version. There is no way to change the language of the user interface on the trial in the case. Also check the settings of your system language. By default, installs broken will use the settings system locale. that cannot be replaced with a serial number when you purchase the product.
Mylenium
-
change the user interface presentation based on the size of the Panel
I'm looking for a way to adjust the layout of my user interface based on the size of the group. For example, two buttons that are top of the other until the height of the window is small enough that they need to be next to each other instead.
Another example would be a series of buttons that appear as a line if the Panel is wider than high, or in a column if it is higher than it is wide.
-What someone does something like that, or know if it is possible? As I see it, all I need is a way to read the current size of the Committee and I can put a function in onResize/onResizing that allows to adjust the layout of the user interface.
Figured it out!
This change my row of buttons in a column of line based on the report of the window. Finally understood windowBounds.height and windowBounds.width.
myPanel.onResizing = myPanel.onResize = function () { if (myPanel.windowBounds.height > myPanel.windowBounds.width){ myPanel.grp.cmds.orientation = "column"; } else { myPanel.grp.cmds.orientation = "row"; } this.layout.resize(); }
-
Change the colors of the images between monitors while the user interface remains the same
Hey! Im having a problem where photoshop change colors when I move the window between my monitors, see here: http://sta.sh/04y5s60vf3j is not due to the monitors themselves being different, it does actually change after a few seconds to move inbetween the monitors. The left was callibrated with an elite group of spyder 3 I do not have access to. I applied the file with windows instead of the utility of spyder color management. The second is new, and it is not callibrated by what that is, but instead was done by hand with integrated RGB brightness/contrast/custom settings. Two of them are very close to eachother, so enough for my taste. but when photoshop changes which looks like the image, it is causing problems. Curiously, when I disable calibration of the screen on the left, the image doesn't change color between monitors, but instead always appears as it does on the right. but then they do not match to the top and all the screen looked washed out because it's uncallibrated, so that won't do me any good. Something else interesting to report, is when this image is saved as a. JPG and read with firefox, the image appears exactly as the monitor on the LEFT (which is my primary monitor) despite the monitor left which is the force has changed. does anyone have any suggestions? It also appears that photoviewer windows behaves in the same way, although firefox does not work. Meaning when I open an image in all 3 on the left monitor, they look alike, but when opened on the right monitor, windows photo viewer and photoshop both display the image such as the brighter and redder that firefox works. It's frustrating, because it seems that photoshop changes the image with my measured on my monitor left to match what it looks like on the web, it does. but it does not for the monitor right, or the left is uncallibrated. Another question, I can see with this is even if the user interface is the same shade of gray, the images are different between the monitors because of this change. Does anyone have suggestions?
-BD
What you need to understand, is that Photoshop converts the image data, the document profile for the display profile, independently for each display. It is a managed pipeline standard color display. Windows Photo Viewer does the same thing (but do not have a lot of other applications).
When you move a picture on the screens, it snaps when you drop; as the new display profile is picked up.
Calibration is only partly about changing the monitor's response. The second part a profile, which is a complete description of the screen in its calibrated State. Then a conversion of standard profile is performed as he goes to the screen. The profile has a much higher level of accuracy than the single calibration.
---
If the image on the web has the stripped document profile, Firefox with default settings does not have this conversion and sends just the unchanged data to display. In other words, it is not color managed. This behavior can be changed, but get your first straight base display profiles. Unless you get a new calibrator it is no that you can do to match these two views.
-
Is there a way to change the number of Sockets of Test, the User Interface of CVI?
I would like to have the number of sockets in an INI file, the User Interface would be read the value of the file and set the number of Sockets of Test. I know that it is possible by adding a callback sequence, ModelOptions, to my files in sequence and by changing the setting. How would you do it in the UI?
You might have the user interface to read and edit the reportoptions config file as the process template (see the source code for modelsupport2.dll in
\Components\Models\TestStandModels). But why do you need UI to do this? Why not simply substitute the recall of ModelOptions and he do there? -Doug
-
How to change the size of the user interface component
Hello
How can I change the size (width and height) of the user interface component? For example, I want to set the width of a ListField and add a scroll bar (horizontal). Thank you.
Young
GetPreferredWidth and getPreferredHeight methods can be rewritten to change the requested dimensions of a field.
However, this does not mean that a field will support horizontal scrolling with only this change and can vary depending on the field.
-
Because I'm more used to the versions IN applications that I need to uninstall some applications that I had already installed in my computer to change the language of the user interface. After some research, found this procedure: change the language setting of your creative Cloud applications but the apps simply appear not listed as installed creative cloud. What should do?
uninstall all of your programs of cc, including the application of office cc.
clean through the use of the Adobe Creative Cloud cleaning tool to solve installation problems
then install the desktop app, apps download Adobe Creative Cloud | CC free trial Adobe
After changing the settings for the language you want to use, install your programs of cc.
-
How can I change the language of the user interface
It seems that some efforts on l10n had been put in the latest TP. My host OS is Win 7 x 64 (Simp-Chinese) and I find that the user interface has been localized.
As I have no option to change the language, could someone tell me how to do?
BTW: I also noticed that some channels have not translated yet while some translations need to be improved.
I wonder how can I report a l10n issues. As this community is English, I don't think I can report it here.
Thank you.
A solution from a member of the VMTN community. And it works:
If you want to change the workstation to English user interface, you can open Control Panel, open "regional language and ' and change the format to"English (United States). Workstation displays in English.
He also mentions that the l10n process is not yet complete. So I guess it would be better for people like me to inform after the final version.
-
Sharing of inconsistency between the API and the user interface for catalog
In the vCloud Director UI, you can go to the properties of a catalog and share TWO everyone in read-only AND specific users/groups to have full control of the value. The API seems to allow to BE ReadOnly value all or specific users/groups to full control. Even when I put the two in the UI, when I do a GET with the API, if IsSharedToEveryone is set to true, the individual user/group access control settings are not displayed. They are mutually exclusive?
So who is correct? the API or the UI?
If the user interface is correct, how can I get the same result with the API?
What I want to achieve, is to allow full control to a specific group of users and read-only for everyone.
The workaround is to have a group set for total control and another with everyone in the org in a different group of read-only value.
Hello
This is a limitation of v1.0 of the vCD REST API. It is already fixed and will be available in the next version.
In this case, the user interface is correct.
Kind regards
Todor Todorov
-
change the language of the user interface
Hello
I was wondering how one person can change the language in their profile information and who change the language of the user interface.
What I found is the language pack which was of stellent 7.5 I don't even know if another was released for 10gR 3... There?
and this component do I want? or t - it just change the language for everyone in the system? If then... How do I do changes in language UI system by his profile and not system-wide.
Thank youYou need to launch the repressive properties applet, go to the location tab and select the locations you want available to users. Then, users can go to their individual profiles and select the language they want to that Content Server displayed in when they connect. In this way, it affects all users.
I hope this is what you were asking about. :)
Jason Stortz
http://www.corecontentonly.com -
After I changed the value of the threshold warning/cirtical metric, I noticed there was a 'TARGET_TYPE' _ 'targetname '. XML generated in forlder $AGENT_HOME/sysman/emd/collection. It assumes that the registered here threshold has priority over that of collection.xml in $AGENT_HOME/sysman/admin/default_collection, right? I'm very curious, is if the new threshold is also recorded in some tables, the agent generates the 'TARGET_TYPE' _ 'targetname '. XML after reading the new value? If it is, could someone offer me the East?
Thanks in advance!
Thank you
SatineThe default collection file supplied with the plug-in is the basis of how the collection for the target type agent. If the user makes changes through the user interface, the agent record in a specific collection of target instance file that selectively replaces the default file in the collection.
Data collection should be TARGET_METRIC_COLLECTIONS view of $ MGMT.
-
Error variables look a tab after race change the user interface
Hello
I have a problem which seems to be a bit like this:
The VI I'm running is a step of edit of a type of step. LabVIEW checks if the property 'Step.Setup.ReadMeasName' exists, fills a listbox with her if she does. An another ListBox with all available measure names will also appear on the user interface. The user has an Add and Remove button to remove the 'ReadMeas' list box measures or add them to it of the listbox 'MeasNames '. Several names may be added/removed according to what is selected when you press the buttons. Once 'Fact' is clicked the VI writes the 'Ref' to the list box "ReadMeas" property to "Step.Setup.ReadMeasName", using a node to set the value of property that is passed the TestStand sequence context. If the property does not exist it creates.
The only time where I have any problem is when I try to remove items from the property, after it is already initialized (i.e. non-empty). In other words, if I run the VI of teststand, put several names as in "ReadMeas" click on done, again run the VI (already added names appear in the box when the user interface is displayed, LabVIEW reads "Step.Setup.ReadMeasName"), then remove the names. IF "ThisContext.Step.Setup.ReadMeasNames" has opened in the tab 'Variables' step when you try to remove the names, I got this message in the Variables tab: 'one or more errors occurred. Please save your work and restart the application. "If I'm careful of not having expaded 'ThisContext' in the variables tab, but check the property before and after the removal of names in the list it does not work properly, and there is no error.
This isn't a big problem because I doubt that the end user will check to see that the property has actually filled, but I still want to fix the bug if possible. I installed the patch for TestStand 2010 and the .net Framework 4.0. Someone has an idea of what might be happening here?
Thank you
-Josh
Josh-
Looks like you are running in a known issue 193751, which is documented in TestStand 2010 and 2010 SP1 known issues list. It is a problem that we intend to fix in a future version of TestStand.
I hope this helps and I'm sorry for any inconvenience this issue may cause you.
-
Launch by programming a sequence file don't switch for execution in the user interface
TestStand 4.2
LabVIEW 2009
Windows Vista Business 32-bit
My movie file uses a SequenceFileLoad reminder to start his own execution automatically by using the entry point TestUUTs. This is accomplished by calling the Engine.NewExecution method. The problem I have is that my custom LabVIEW user interface does not switch to the view of execution when execution begins. If I manually start the execution using the TestUUTs key, the point of view of execution is displayed.
In my interface user, changing the display of the sequence at the sight of the execution is done in the event callback, DisplayExecution, and the StartExecution event reminder. I also tried the ExecutionChanged event reminder, but realized that it did not apply in this case. The complex UI that comes with TestStand works correctly and, as far as I know, I use the same event reminders to manage change in my user interface.
Any ideas? What Miss me?
Thank you
Toby
CLD, CTD
I realized what was going on. I was to switch it on the SequenceView using the ExecutionClosed callback, but was not checking the number of executions that have been opened. Opening my file of sequence autolaunching would open two executions, one to open the file and the actual execution of the file. As soon as the file has been opened, the first run was closing my UI to return to the display of the trigger sequence. Execution else had already begun the execution of the sequence file so he would continue to run in view of the execution, but I didn't see it.
I now use ApplicationManager.Executions.Count and only to switch back to the SequenceView if it was not open execution.
-
Hello
I have in fact 2 queries
(1) how can we access attachedobjects defined in QML in C++?
(2) I'm loving development on Blackberry 10 C++ is one of my favorites. But I'm a bit lost when it comes to managing the user interface in classes. For example when we create the project through momentics we have a class called ApplicationUI. It manages all the (default) user interface commands, we in C++. as for example creating the document qml and setting as root user interface, etc. I am now working on an app that have NavigationPane as root, and then I continue to push pages (like the screens). But now the code for all pages is inside my ApplicationUI. What is the best practice to keep the UI for each page logic in a separte C++ class?
I also develop for Android that a separate class for each activity, this code does not mingle for each activity. Please guide me how can I keep logic of user interface of each Page into a separate class of C++?
regarding your second question:
I think this is the simplest approach to keep all things in the UI in QML. You can easily put things into separate files.If you want to use c ++ to the user interface: can be done, too. just put it in separate classes and include those in your application class.
-
doubt Doc-ID 1618305.1 How to install and configure the user interface with WebCenter content 11.1.1.8.0 content
The portal_domain field contains;
AdminServer (admin) and Enterprise Manager, (port 7001)
IBR_server1, (port 16250)
UCM_server1, (port 16200)
WC_Spaces1, (port 8888).
On the same machine, I have another weblogic, admin and for the ITS.
The case is that continued to develop for the upgrade to the new skin WebCenter content.
That's my goal.
Then I did some research and came to the following notes in support.
1 - how to install and configure the UI content with WebCenter content 11.1.1.8.0 and 11.1.1.9.0 (Doc ID 1618305.1()
and
2 - update of the 11.1.1.8.0 UI content after you apply the Patch of Bundle WebCenter content 3 (MLR 3) or higher (Doc ID 1617477.1()
The UCM_server1 has the following House / app / oracle / Middleware / Oracle_ECM1 /.
And the list of patches;
===================================================================================================
Installed products of higher level (1):
Oracle WebCenter content management install 11.1.1.8.0
There are 1 products in this House of Oracle.
Installed products (40):
Cloning of the 11g Application Server 11.1.1.8.0 component
Enterprise Manager Application Server Integrator Plugin - Management Service Support11.1.1.7.0
FMW Control Plugin for Oracle inbound refinery 11.1.1.8.0
FMW Control Plugin for Oracle WebCenter Capture 11.1.1.8.0
Component install SDK 11.1.0.9.0
Oracle Application Server Configuration 11.1.1.7.0
Part of Oracle 11.1.1.7.0 Bali
Oracle 11.1.1.8.0 capture
Common files Oracle WebCenter content management 11.1.1.8.0
Oracle Content Server 11.1.1.8.0
Content of Oracle 11.1.1.8.0 Server component
Content access Content Server Oracle 11.1.1.8.0
Access to the contents of the Oracle Content Server 11.1.1.8.0 files
Oracle Content Server Core 11.1.1.8.0
Oracle 11.1.1.8.0 server content distribution
Oracle extended Windowing Toolkit 11.1.1.7.0
Oracle Fusion Middleware Admin Config 11.1.1.6.0
Oracle Help for Java 11.1.1.7.0
Oracle Help for the Web - UIX 11.1.1.7.0
Oracle Help for the Web Shared Library 11.1.1.7.0
Oracle Help share library 11.1.1.7.0
Ice browser Oracle 11.1.1.7.0
Oracle IRM 11.1.1.6.0
Oracle extended JFC Windowing Toolkit 11.1.1.7.0
One-time correction of Oracle 11.1.0.9.9 installer
Oracle outside in technology 8.4.0.0.0
Oracle Remote Client of Intradoc 11.1.1.8.0
Component of Oracle 11.1.1.7.0 rules
Oracle SOA 11.1.1.7.0 workflow
Universal Oracle install 11.1.0.9.0
Oracle Upgrade Wizard 11.1.1.8.0
Oracle Upgrade Wizard 11.1.1.8.0
Upgrade Oracle WebCenter content management 11.1.1.8.0 Assistant
Oracle WebCenter Capture 11.1.1.8.0
Oracle Webcenter content - rights 11.1.1.7.0 documentalist
Oracle WebCenter content - Universal Content Manager 11.1.1.8.0
Oracle WebCenter content management install 11.1.1.8.0
Oracle WebCenter content 11.1.1.8.0 management product suite
Oracle WebCenter content: Imaging 11.1.1.8.0
OracleAS Documentation 11.1.1.8.0
There are 40 products installed in this House of Oracle.
Interim plates (2):
Patch 18188143: applied the sea Mar 19 17:37:32 BRT 2014
Patch ID: 17263162
Created February 5, 2014, 12:56:41 pm
Bugs fixed:
15872313, 17184457, 17515691, 16633496, 14317920, 15991141, 16892410
14071471, 17929776, 13414481, 16042293, 17018964, 17627211, 16768600
16037162, 14521663, 17768056, 14738077, 16460053, 17567819, 17806416
15905591, 16080297, 17569908, 17043756, 18139768, 17211093, 17805499
16418434, 16828356, 16671687, 17039391, 16698130, 17943394, 17632731
17560900, 14246603, 15941347, 16045712
Location of patch in the inventory:
/ app/Oracle/middleware/Oracle_ECM1/Inventory/oneoffs/18188143
Patch location in the storage area:
/app/Oracle/middleware/Oracle_ECM1/.patch_storage/18188143_Feb_5_2014_12_56_41
Patch 18088049: applied the sea Mar 19 17:35:58 BRT 2014
Patch ID: 17182855
Created February 16, 2014 20:35:48 hrs PST8PDT
Bugs fixed:
17919101, 17894065, 17884570, 17883868, 17883112, 17854549, 17835742
17832305, 17819213, 17812338, 17789722, 17783376, 17778867, 17761746
17740542, 17733871, 17698852, 17658821, 17642431, 17636186, 17622384
17616664, 17616611, 17616489, 17613656, 17608703, 17589960, 17581458
17574153, 17567413, 17565564, 17558210, 17558068, 17546505, 17545841
17540480, 17528590, 17514070, 17511368, 17511271, 17511089, 17501678
17500375, 17475733, 17449617, 17421368, 17417817, 17416821, 17416807
17416771, 17416377, 17416343, 17402732, 17401071, 17401052, 17397875
17393920, 17393892, 17369286, 17368525, 17368096, 17362858, 17362130
17354877, 17353764, 17352746, 17335303, 17335290, 17330493, 17324707
17323595, 17323038, 17317268, 17314494, 17313064, 17313052, 17313000
17312990, 17312933, 17312863, 17312366, 17298386, 17295962, 17290804
17285105, 17270986, 17261952, 17255019, 17219134, 17216119, 17206903
17201035, 17200854, 17199763, 17187804, 17185539, 17171852, 17171818
17164502, 17160600, 17153780, 17074852, 17050451, 17049175, 17026301
17008220, 17007746, 17007534, 17006378, 16999307, 16999291, 16991380
16980256, 16980207, 16980196, 16979042, 16961904, 16958142, 16954858
16941623, 16936055, 16936048, 16936036, 16936020, 16936006, 16935987
16935976, 16921682, 16908287, 16858148, 16815976, 16796213, 13931337
17424037, 17006115, 17171834
OPatch succeeded.
==============================================================================================
And contains the following configurations in config.cfg
==============================================================================================
SocketAddressHostSecurityFilter = 127.0.0.1 | 0:0:0:0:0:0:0:1 | 192.168.1. * | 10.62.1.79
xPortalSecurityPropagate = true
Web server = javaAppServer
AllowUpdateForGenwww = 1
SearchIndexerEngineName = OracleTextSearch
IndexerDatabaseProviderName = SystemDatabase
AdditionalEscapeChars = -: #.
FileEncoding = UTF8
MaxQueryRows = 2000
DisableAuthorizationTokenCheck = true
IntradocServerPort = 4444
SchemaPublishInterval = 604800
SSAllowDelayedProjectWrites = true
IdcServerThreadQueryTimeout = 120
DisableQueryTimeoutSupport = false
MaxSearchConnections = 20
#Cache
UseSearchCache = false
#
#AdditionalEscapeChars = _: #, -: {-}, has: A, GOLD: GOLD, CAN: CAN, AND: AND at the END:
# Accesing a content item on a mapped Web URL (WebUrlMap) fails with the error: "unable to retrieve the content. Security access denied» (Doc ID 1639028.1()
MaxAccountsInSecurityClause = 300
# end (Doc ID 1639028.1()
#Search fails for external users in WCC after upgrade to 11.1.1.8.0 (Doc ID 1676468.1()
DoCaseInsensitiveAcctSearch = false
# end (Doc ID 1676468.1()
#MigrationFormatForfApplicationGUID = dCollectionName:dCollectionGUID
==============================================================================================
To my UCM_Server1 content WebCenter.
As I already have a WebCenter content I have to follow the second part of the note
How to install and configure the UI content with WebCenter content 11.1.1.8.0 and 11.1.1.9.0 (Doc ID 1618305.1).
Install and configure content WebCenter ADF WebUI against WebCenter Content Server
Step 1) install the MDS schema
(Step 2), install the Weblogic Server
11 GR 1 material step 3) DOWNLOAD and install Oracle Application Development Framework (11.1.1.6.0) in the new WebUI WLS Middleware House, found here
Step 4) Download and apply Patch 16, 546 129.
Step 5) Download and apply Patch 16, 546 157.
Step 6) download and apply the Patch and then 19,469,801, 18,102,108 Patch
Step 7) copy the wccadf files in the field of user interface
Step 8) Oracle on demand services (MDS) metadata registry
Step 9) Place the WebCenter content domain user interface model
Step 10) run the Setup Wizard on the new home of Middleware WebUI to create the new domain
Step 11) updated the Oracle ADF of shared libraries
Step 12) start the domain WebUI administration server
Step 13) Save target Managed Server with the MDS repository and create the metadata partition
Step 14) start the server managed WebUI.
Step 15) associate UI WebCenter content to Content Server.
Step 16) reboot the WebUI ADF server managed.
Step 17 access the WebUI
Step 18) complete the Configuration of the workflow
Step 19) apply the latest Patch Bundle content UI of WebCenter
MY DOUBT IS:
To read the steps that I understood, to 19, with success, in the end, I will have an another WebLogic with a domain name and its respective EM.
I have two servers weblogic?
portal_domain (explained above) and a new wccui_domain wls and domain.
This fix it?
Two WLS to keep WebCenter portal and content, and other elements.
Because I'm not able to do with the WLS even where I UCM_server1 today?
Thanks for all suggestions and criticism.
To read the steps that I understood, to 19, with success, in the end, I will have an another WebLogic with a domain name and its respective EM.
I have two servers weblogic?
portal_domain (explained above) and a new wccui_domain wls and domain.
This fix it?
Two WLS to keep WebCenter portal and content, and other elements.
Because I could not do with the WLS even where I UCM_server1 today?
Yes, up to 11.1.1.9.0, you will need to install a new wls House (new wls server admin) and then configure WCC ui there. User interface and COE will not work in the same field. You can have the portal and content under the same House of wls and install a new one for the user interface.
This is due to a problem with ADF and WCC libraries.
With 12 c, this dependence is not there, and you can install / configure all 3 (Portal, content and adf ui) applications on the same domain.
-
How can I change the size/scale of menus of the user interface in CS6?
Recently got a new laptop to work running windows 7, CS6 and menus of the user interface are almost unreadable. Help, please!
I can't tell you how many times I hear it, and it's something that has to work on Adobe. The problem that you are running is that, as our instructors to expand and the resolution increases, all the elements in our software applications (buttons, menus, etc.), are getting smaller. Your only current option is to reduce the screen resolution of your computer. To do this, right-click on your desktop, and then choose the resolution of the screen. Slide the resolution down until everything is readable for you. Usually, something in the neighborhood of 1280 X 800 works but it is very subjective for each user.
Maybe you are looking for
-
Hello, I have a mid 2010 21.5 (MC508LL/A) imac that has a bad graphics card. I've had this confirmed by an authorized Apple repair shop. I got an estimate of $643,00 for the repair, which I can't do right now. I heard that you can connect a second mo
-
"HP Envy 15": HP Envy 15 "hinge Florence
My Envy 15 "screen laptop touch hinge right is Florence, seems to be a known issue. Y at - it no recall on this problem? I called HP support and they asked c $260 to solve the problem. It's unacceptable, almost all users have the same problem... Need
-
Re: My laptop Satellite will not start
Hellos Satellite series a of 4 years.does not start when turned on, the fans run, but wont even get to the POST.any ideas? HARD or Mo disk failure?
-
LabVIEW RT 8.5 puts a limit on the FAT32 partition / hard disk size?
-
How can I print the individual lists in a group of Windows Mail?
Original title: Group of Windows Mail in Vista How can I print the individual lists in a group of Windows Mail?