Launch by programming a sequence file don't switch for execution in the user interface
TestStand 4.2
LabVIEW 2009
Windows Vista Business 32-bit
My movie file uses a SequenceFileLoad reminder to start his own execution automatically by using the entry point TestUUTs. This is accomplished by calling the Engine.NewExecution method. The problem I have is that my custom LabVIEW user interface does not switch to the view of execution when execution begins. If I manually start the execution using the TestUUTs key, the point of view of execution is displayed.
In my interface user, changing the display of the sequence at the sight of the execution is done in the event callback, DisplayExecution, and the StartExecution event reminder. I also tried the ExecutionChanged event reminder, but realized that it did not apply in this case. The complex UI that comes with TestStand works correctly and, as far as I know, I use the same event reminders to manage change in my user interface.
Any ideas? What Miss me?
Thank you
Toby
CLD, CTD
I realized what was going on. I was to switch it on the SequenceView using the ExecutionClosed callback, but was not checking the number of executions that have been opened. Opening my file of sequence autolaunching would open two executions, one to open the file and the actual execution of the file. As soon as the file has been opened, the first run was closing my UI to return to the display of the trigger sequence. Execution else had already begun the execution of the sequence file so he would continue to run in view of the execution, but I didn't see it.
I now use ApplicationManager.Executions.Count and only to switch back to the SequenceView if it was not open execution.
Tags: NI Software
Similar Questions
-
In the last months, I started to receive messages pop up when editing pdf files. One is "cannot complete this action because the"filename. " PDF-Adobe Acrobat Pro"program is not responding. "Choose" switch to "and correct the problem. The other is "content preparation courses. "Please wait while the document is being prepared for" and displays a progress bar. One last question, I noticed it is adobe hangs quite frequently and shows "not responding". I had Adobe Acrobat X Pro for several years, and these have not always taken place only months. I ' n not Adobe expert so I don't know why this is happening. I checked the updates. Any advice on what is happening?
Hi jeffm7844011,
Could if it you please let me know the version of the OS on your system?
Please let me know this happens to you with all the PDF files that you try to change or with specific PDF files?
Please see this KB document: https://helpx.adobe.com/acrobat/kb/message-content-preparation-progress-opening.html and Windows resolve system errors, freezes | Adobe software .
Also please try to repair the installation by navigating to the help > repair installation.
Let me know if it helps.
Concerning
Sarojini -
I'll try to ask this question clearly, but I ask that read you it carefully, because I can't do a great job of setting out clearly what I'm looking for.
I know how to create a virtual disk in a batch file or a script. I know how to have a running virtual machine to detect a newly added hard drive and format it in Linux, BACK, and NetWare. I do not have scripted this part, but I did it manually by adding records via the UI and then by doing the steps manually to make the operating system to detect and format the newly added drive. In each case, these steps are scriptable with the exception of the addition of the drive in the user interface.
The only way I know to add a new hard disk to a virtual computer running is through the user interface. I don't know in a way that can contain script (for example vmrun or an API call) to make.
I guess that maybe I can have the virtual machine to go into sleep mode and then add the HDD in the vmx file while the machine is in standby mode, then put the computer to sleep mode, although I have not tested this.
My question is, ' can a virtual drive be added to a virtual machine running without using the user interface and without put the machine to sleep, or in other words in a script any?
Have you tried VI SDK?
-
Hi all:
Is the Compress/decompress utility file supported by all types of Windows OS (XP, VISTA, Windows 7)? or for some region the user install it?
Any link from the website of Microsoft?
I managed to get the guide from the Microsoft web site, but just a guide without a show of declaration of default installation during installation of the operating system.
Window XP:
http://support.Microsoft.com/kb/306531
Windows Vista:
http://Windows.Microsoft.com/en-us/Windows-Vista/compress-and-uncompress-files-ZIP-files
Windows 7:
http://Windows.Microsoft.com/en-us/Windows7/compress-and-uncompress-files-ZIP-files
Thank you.
CoulombeHello
Compress and decompress are not a separate tool/utility to download and install in the computer. They have functions that come with these 3 operating systems. These features are available in Windows XP/Vista/7 from across operating systems.
However, you can also use your favorite search engine for non-Microsoft applications to compress and extract files such as Winzip and Winrar.
Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
It will be useful.
-
While making a sweep of the AV, I see the files under analysis I want to remove it from my computer. All I can remember for the location of the files is C:\Documents and Settings of the user... I guess that the question is what will be called as temporary Internet files (under Windows 95). What should I do to access the folder where the files are stored?
Tools / folder options. Discover tab show hidden and protected system files
Use ccleaner do... Install, then run it.
-
Original title: speedy
My pc tells me to open the settings of the user interface on my windows laptop 8. I currently have
has ran a quick backup, and now iiiimy pc asks me to open the user interface and I have to reinstall the application
not known were and how to find what to do.
Hello
Please contact Microsoft Community. I've surely you will help solve this problem.
To better understand the issue, let me know if you get this error when executing quick backup?
If you get this error message when running fast backup software, you can visit the article to uninstall and reinstall the software.
Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.
-
exe files don't run for a single user
Vista Business PC has a virus. I think that the virus has disappeared, but all the exe files will not work for a single user only. All other users that they work very well.
I would like to understand why exe files work for users and a way to fix it.
One of them should do it:
Download the difficulty here http://www.winhelponline.com/articles/105/1/File-association-fixes-for-Windows-Vista.html .exe
Or restore the .exe file association after incorrectly associating it with another application http://www.winhelponline.com/articles/165/1/Restore-the-exe-file-association-in-Windows-Vista-after-incorrectly-associating-it-with-another-application.html
-
The files are encrypted without any action of the user!
Recently received "Backup failed" Norton 360 backup. Reason: met encypted files. I never encrypted any file, but on verification, of course, a large number of files have been encypted without any input from me, the user. Any ideas?
Files cannot be encrypted by themselves. You must actively do this thanks to Vista Professional Edition-full native encryption or using an encryption third-party program like TrueCrypt or that may occur if the computer is infected with a trojan ransomware. However, if it was the latter you would now get messages to "blackmail" him. I suggest you contact Symantec technical support.
http://www.symantec.com/techsupp/index.html - Symantec technical support
http://community.norton.com/norton/ - Norton forumBurning questions of Norton and patches - http://community.norton.com/norton/board/message?board.id=Announcements&message.id=17
MS - MVP - Elephant Boy computers - don't panic!
-
Tried the solutions suggested in the windows click here for more information, but does not. The programs seem to work but cannot get rid of the message. Thank you.
Windows 7 operating system
Hi Michael,
1. don't you make changes to the computer before this problem?
2. What are all the steps you have done?
3. when exactly you get this message?
Follow these methods.
Method 1.
Connect the device, run the hardware and devices Troubleshooter and check if that helps.
Follow the link given to open the Hardware Troubleshooter: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter
Method 2.
We can refer to this article and check if that helps.
Error: "the UI file is missing" (code 101-8200): http://support.en.kodak.ca/app/answers/detail/a_id/31863/selected/true
Let us know if you need help with this question, we will be happy to offer you our help.
-
I created the Web service VI ("Mt-insolacije.vi"), which has two terminals of the input string (FROM / TO) for the dates of arrival and exit of two data terminals (table 1 d) from database (MS SQL server). This VI communicates with the database with functions of the database with a DSN and SQL query appropriate palette. There are two tables with two data (time and Insolation) columns in the database.
This VI works when you run in Labview 2010, but when I used it as VI in UI Builder it returns no data.
Could you please help me find a solution. Is it possible to communicate with the SQL server database in this way or there is another way?
There are two files attachmet: Image of .vix file in Interface builder and .vi file ("Mt-insolacije.vi")
Please help me ASAP!
Thank you
Ivan
I found the solution problem is in the DSN. I've been using the user instead of DSN system DSN.
It's important to create the system DSN if you want your VI of web service to communicate with the database.
PS Please put feature bundle format timestamp and XY graph in the web user interface designer. It's complicated to trace data with datetime on X axis without them.
-
I accidentally this marking of some programs at the beginning of the modern user interface. Though even they do not show on the start menu, windows store updates offers up-to-date on them without worrying. Can someone tell me how I can back these applications?
Thank you. :)
This is how...
- Right-click on the Start Menu
- Select "All Apps"
- Scroll to find the "missing" app
- Right click on it
- Select "Pin Code on startup"
-
Download csv file don't ask where to store the file
Firefox is set to "always ask me where to save files.
I have a WebService to download a file download.csv via a POST request (must be a POST request and not a GET request due to data problems).
I use jquery.fileDownload.js on the Web site to achieve. When you press the download button, the 'Opening download.csv' screen opens with the option 'Save file' preset. After pressing OK, a window of the Explorer must take place in order to choose the location of the file. But it is NOT shown. Instead nothing more happens.What could be the problem?
P.S.: in other browsers it works fine.Hello gnittala,
Thanks for your reply.
1 MIMEType is set correctly.
2. When you use this configuration, the file is downloaded correctly.Now I discovered, what was the problem:
the jquery.fileDownload.js plugin was removing the iframe internally used too early, before the Explorer window could not be displayed. Keeping the iframe longer (at least until the Explorer window is displayed, or more easily reuse in next download call) solves the problem.Astridr
-
I installed the slide to this effect, but it does not work so I have audio downloads that I can't access. Help, please.
I installed the slide to this effect, but it does not work so I have audio downloads that I can't access. Help, please.
=================================================
The following links may be worth a visit:Windows XP - to extract files from a zipped compressed folder
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/cf_extract.mspx?mfr=trueHow to open a Rar file
A Simple explanation of what a Rar file is and how to use it
http://www.associatedcontent.com/article/336729/how_to_open_a_rar_file.htmlDownload WinRAR:
http://www.download.com/WinRAR/3000-2250_4-10007677.html -
Stor.e don't Slim for Mac after the password no CCADE
Hello
I have a Toshibe 1 TB Stor-e Slim for Mac.
I backed up all my data on the drive and created a password with the password tool.I had to reinstall my Macbook Pro, but unfortunately after that the device is not accessible.
I tried looking for the password tool but I did not like them there.Maybe I need this password tool to reinstall on my macbook.
Any help in appreciated because all my data is on the device.Thanks in advance!
G.
The STOR. E SLIM FOR MAC 2.5 "1 TB SILBER USB 3.0 comes with password protection software.
If you used this software to protect files, then you need to install and use this software again to obtain access to protected files. -
I don't know how to enter the user account from the Hp laptop?
I bought a laptop from a garage sale. It turns on but it is a user with a password on this matter. I don't know how to get from there. The people moved so no way of getting information about the password.
Original title: Hp laptop
Hello
When you buy a used machine, the advice is to reinstall the operating system, you don't know what this machine was used for and/or malware may be present.
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.
Here's information from Microsoft, explaining that the policy:
See you soon.
Maybe you are looking for
-
What should I do if my new tabs not apear when I click on the + or the Ctrl + T do?
My tabs will no longer open: (I continue to click on the lil' + on the side to open a new one and it doesn't work anymore, I tried to open a file by clicking ctrl + T, but that doesn't work either, I tried firefox reinstaling and it still does not wo
-
Portege M700: Message DEP, saying he has turned off the Tablet PC Component
Windows Vista Business SP1 is intermittently during starts with a message DEP saying it has disabled the "Tablet PC Component". Unexpectedly, this happened 5 times in the last 3 days. Once it happens, data via the touchpen entry and writing entry too
-
Impossible to uninstall/install the software printer, error message.
LaserJet 1006 Windows XP I have recently been unable to use my printer because it (for some reason any) is more loaded into my computer (software). I have tried both online and using the printers software disk both uninstall AND install without succe
-
My D: drive does not open
I have a drive has opened to my D drive, but it does not open, I can't even insert discs, little help please! Thank you Clayton C.
-
I changed the location of all my folders for user data to another partition to the default location (C:\Users\) and removed the second partition. Now when I do a Windows search returns the results OK, but in the location now gone! How to reset indexi