unhandled error can stop it

Similar Questions

• PXI-8512/2 XNET CAN stops when bus errors occur on Spadina

  Hello, I use the PXI-8512/2 in a noisy electrical environment so I often get errors on the CAN bus. I noticed that often 8512 stops communicate. In my dual port 8512/2, 4, # LED that flashes normally will eventually turn off. However, I have other devices listening on the same bus; report errors, they continue to stay alive. Is there anyway that I can get the 8512 continue to work in the presence of errors? I use the custom device XNET for VeriStand 2009 and do not see the error handling options. In fact, I don't get any notification of errors at all. I just noticed that my incoming CAN stop signals and my leavers have no effect. Thank you.

  Hello

  You shouldn't have to remove from your devices.  Just update the configuration and engine llbs and restart the Explorer system, save your configuration and redeployment.  Let me know if you see problems.

  (There are new files also copied into the directory of device custom if you want to use the bus monitor function... so you can replace the entire record of the NOR-XNET if it's easier).

• Hello, when installing Adobe Creative cloud, you get the error: program stopped working "Adobe Creative Cloud" Windows can check online for a solution to fix this error on the Internet. The next step is really for a solution online

  Hello, when installing Adobe Creative cloud, you get the error: program stopped working "Adobe Creative Cloud" Windows can check online for a solution to fix this error on the Internet. The next step really is to get an online solution and close the program, close the program. Signature of the problem:

  Problem event name: BEX

  Application name: Cloud.exe Creative

  Application version: 3.4.3.189

  The timestamp of the application: a 56702, 75

  The name of the module with the error: StackHash_0a9e

  Version of the module with the error: 0.0.0.0

  The module of time with error stamp: 00000000

  The exception of compensation: 00000000

  Exception code: c0000005

  Exception data: 00000008

  OS version: 6.1.7601.2.1.0.768.2

  Language code: 1049

  Additional information 1: 0a9e

  More information 2: 0a9e372d3b4ad19135b953a78882e789

  Additional information 3: 0a9e

  Additional information 4: 0a9e372d3b4ad19135b953a78882e789

  
  

  uninstall all cc on your computer.

  clean a http://www.adobe.com/support/contact/cscleanertool.html

  Restart your computer

  suspend your antivirus/antimalware

  Right-click on the file to install the desktop application, and then click "Run as Administrator".

• Unresponsive SCRIPT ERROR MESSAGE: A script on this page may be busy, or it may have stopped responding. You can stop the script

  A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script ends.

  Script: chrome://fctoolbar15deb6ef0da547a68f89de500e1d5937/content/fctoolbar.js:1

  See this help page, lists also several extensions

  • http://KB.mozillazine.org/Unresponsive_Script_Warning

• error message stopping me from loading mcafee

  error message stopping me from loading mcafee as well as I can not load the 3 pack

  Hello PamelaReeves straw,

  What is the error message you get when you try to install McAfee? You need an internet virus protection if you do a search on the internet. If you do not have an antivirus program, Microsoft has a product, that you can download for free. Click on the link below to download and install Microsoft Security Essentials.
  http://www.Microsoft.com/security_essentials/

  It provides protection for your PC in real time at home that protects against viruses,
  spyware and other malware. It's a free download from Microsoft that is simple to install, easy to use and always up to date so that your PC is protected.

  Try to download to your desktop and install from their. If you get an error message and cannot install, please let us know.

  Sincerely,

  Marilyn

• HP Officejet Pro 8610: hp officejet 8610 printer error "Please stop your printer, and then click.

  When I turn on my HP Officejet Pro 8610 - it goes through its cycle - once it ends the initialization of the startup LCD flashes a Blue Screen of Death with B8931C7C for less than a second, then the screen shows printer error "Please stop your printer, and then click.

  I've tried so far, I've tried it unpluggin at the back, wait 15 seconds and 60 seconds.  Also this operation and in him plugging in several power strips and directly into the wall outlet.

  I was able to restore the default settings at one time.  This questions has gradually deteriorated to the point that wow its very pretty in a loop without end with failure - consistantly crashing after start up - please advise.

  Hi @mrberad,

  Welcome to the Forums of HP Support!

  I understand that your printer HP Officejet Pro 8610 is stuck in an error state. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution" if I helped successfully will solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I can see how frustrating, it would be for you. The error you receive is usually related to a general printer error, sometimes leading to a hardware problem.

  I take a flashlight and look inside the obstruction.

  Use this guide to check obstructions:

  • Displays a Message 'Transport Jam'

  I see that you reset the default printer. Have you tried a reset complete semi? I can send you this information in a private message. In the forum next to your handle name simply click on the envelope to see.

  If you have completed all the above steps and your product still has a problem, service the product.

  If the printer is buyer's remorse period, you can take that back at the point of sale or contact HP.

  Contact HP for service in all countries except Asia-Pacific.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• get error codes; STOP: 0X0000008E

  Original title: keep getting error codes

  I get a blue screen that says STOP: 0x0000008E, (0 x 80526476, 0xA9577C28, 0x00000000 whenever I turn on the computer I need help please)

  Hi emikikmybenisa,

  (1) since when are you facing this problem?

  (2) remember to make changes to the computer?

  Error message Stop is normally caused due to hardware problem. I suggest you try the following steps:

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: You can follow the steps mentioned in the articles below which deals with a similar question

  You receive a random "0x0000008E" error message on a blue screen in Windows XP

  http://support.Microsoft.com/kb/827663

   

  General troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E"

  http://support.Microsoft.com/kb/945658/

   

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• BLUE SCREEN of DEATH error CODE * STOP: 0X0000007E (0XC0000005, 0X8050D532, 0XF78A23B8, 0XF78A20B4)

  I just tried to turn on my computer and I got the black screen that gives you the choice to start in Windows XP or the Recovery Console, and when I click Start in Windows, it loads and then I get a quick death blue screen displays a down error code, and the computer restarts automatically. When I disable automatic reboot in the advanced options I get the blue screen showing this code: * STOP: 0X0000007E (0XC0000005, 0X8050D532, 0XF78A23B8, 0XF78A20B4) I tried this code on Google and got no results. I'm sure that I don't not miscopy, I checked several times.  I tried to start in safe mode, but then I get a black screen with many codes (w-a-a-a-a-y-y-y a lot to copy down) and the computer restarts. Someone knows what to do? I have a lot of important files out there that I just can't lose. Thank you! Any help or advice is appreciated.

  Alex

  While this error can be caused by malware infection, it's commonly found when the RAM failed. In all cases, you want to go down the data files before you do anything else. Do this with one of the following methods:

  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd. I prefer not to do it if I know the drive is infected because he has a chance to infect your host system. In these cases, I use #2 below.

  2. you can start the target computer with a Bart PE (if you use XP) or a Linux live CD like Knoppix and retrieve the data in this way. General information about the use of Knoppix for this are:

  You will need a computer with two cd records, one of which is an engraver of CD/DVD OR a USB thumb drive with sufficient capacity to store your data, OR an external hard drive formatted USB FAT32 (not NTFS) *. Download Knoppix .iso image file and create your bootable CD. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or the free ImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created, and Knoppix will be able to see the files in Windows. If you use the USB key or an external hard disk, right-click on its icon (on the desktop) to get its properties and uncheck "read only". Then click on it to open it. Note that the mouse action by default in the window manager used by Knoppix (KDE) is a simple click to open instead of double-click traditional MS Windows. If you want to burn CD/DVDs, use the K3b program.

  * My understanding is that you can now write on NTFS from Linux partition. If you wish to do this, Google for instructions on the use of the NTFS driver.

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder

  When you have your data safely, get hardware troubleshooting with the RAM before reinstalling Windows. There is no point in trying to install Windows if your material is not good.

  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows

  And for future disaster recovery programs:

  http://www.elephantboycomputers.com/page2.html#Backing_Up

  If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). MS - MVP - Elephant Boy computers - don't panic!

• Blue error screen Stop 0X0000007E (0XC0000005, 0X8070194F, 0XF78DAC30, 0XF78DA12C) and when ejecting a CD or DVD

  Blue error screen Stop 0X0000007E (0XC0000005, 0X8070194F, 0XF78DAC30, 0XF78DA12C) and when ejecting a CD or DVD

  Said event system category 102 event 1003 error view

  Error 1000007e, parameter1, parameter 2 8070194f, parameter3, parameter4 f78da92c f78dac30 c0000005.

  Customer says that has happened for about a year.  Don't know it please help

  Hello

  Use BlueScreenView, MyEventViewer and other methods of troubleshooting BlueScreens
  See the responses in this thread - high two answers.

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/842fa8cf-535e-4b5d-9416-85eb31edbe6f

  ----------------------------------------------------------

  References to Vista also apply to Windows 7.

  This error (7th) is usually a driver problem and display adapter (video) driver is the most suspicious if
  It could be others. Antivirus/antispyware/security programs, major software and hardware (heat)
  questions can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my
  generic methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
  interpret, you must identify which exception has been generated.

  Common exception codes are:

  0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.
  For a complete list of exception codes, see the Ntstatus.h file located in the inc directory
  the Microsoft Windows Driver Kit (WDK).

  Solve the problem
  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  Make sure you have enough disk space.
  If a driver is identified in the bug check message, disable the driver or check with the
  Reference of the manufacturer for driver updates.
  Try changing video cards.
  Check with your hardware vendor for updates to the BIOS.
  Disable the BIOS memory options such as implementing caching or shading.
  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
  (the address of the exception) must identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
  has been launched with the /nodebug switch... This problem should occur infrequently. If it occurs repeatedly,
  Make sure that a kernel debugger is connected and the system is booted with the/debug switch.

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  Hardware incompatibility. Make sure all new hardware that is installed is listed in the
  List of Microsoft Windows Marketplace tested products.
  Service system or driver faulty device. A service driver or defective peripheral system can be
  responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
  and IRQ conflicts can also generate this error.
  If a driver is listed by name in the bug check message, disable or remove that driver. Disable
  or remove drivers or services that have been recently added. If the error occurs during startup
  sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
  Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
  in Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third remote
  control program. If this software is installed, you can remove the boot of the computer service
  by using the Recovery Console, and then by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the bug check 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You should also
  Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or
  Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
  BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
  space, reduce the number of files on the disk drive hard target. Find and delete any temporary
  the files that you do not have to have files hidden Internet, backup application and .chk files files that
  contain fragments of file saved to disk scans. You can also use another hard drive with more drive
  free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x0000007E<-- read="">
  * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

  -------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• 800704B 8-3001 error code stop download of 10 windows to install the drivers and characteristics

  800704B 8-3001 error code stop download of 10 windows to install the drivers and characteristics

  Hello Michael,

  Thanks for posting your query on the Microsoft Community.

  You can improve your current PC to Windows 10 by going to the Windows 10 software download page to download the media creation tool. The media authoring tool can be used to create a USB or DVD media to upgrade your current PC to Windows 10 or install Windows 10 on another PC.

  Follow the instructions on the download page of Windows 10 software: http://www.microsoft.com/software-download/windows10

  Note:

  When upgrading to Windows 10 using media, you must run setup.exe from in your version of Windows 7 or Windows 8 and authentic. If you want to boot from media, you must have upgraded to Windows 10 previously. Boot 10 Windows media directly without upgrading to Windows 10 previously is not supported and will have problems with activation.

  See also:

  Helps the upgrade to Windows 10

  How to: solve the Setup and stop common mistakes during the Installation of Windows 10

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• The system has rebooted without judgment properly first. This error can be caused if the system is unresponsive, is crashed or lost power unexpectedl

  Im having problems with my new rig. All of a sudden it stops working when I just run windows, it can takes minutes to BSOD or seconds.

  I checked the event viewer and that's what I have.

  Event ID: 41
  Task category: (63)
  Level: critical
  Key words: (2).
  User: SYSTEM
  Computer: Sprutmunn
  Description:
  The system has rebooted without judgment properly first. This error can be caused if the system unresponsive, crashed or unexpected power loss.
  The event XML:
  
   
     
      41
      3
      1
      63
      0
      0 x 8000000000000002
     
      1370
     
     
      System
      Sprutmunn
     
   
   
      10
      0 x 0
      0x2
      0 x 1
      0xfffff802e1ccb722
      0
      0
      0
   
  

  IM, including the dmp so file--> https://www.dropbox.com/s/9srgscrrwm96jeq/060814-6578-01.dmp

  I hope some of you guys can help me, ill be happy for all the advice you can provide.

  Thank you

  TJ

  This phenomenon was related to iaStorA.sys Intel Matrix Storage Manager driver from Intel Corp.  It is a buggy especially with SSDS driver or hybrid.  I'd install the most recent driver available, even if it is the same date that drivers become corrupt.

  If you have a SSD drive or hybrid don't forget to update the firmware and you really need to update to win 8.1, you will stop to get the updates bit of time if you do not have.

  Microsoft (R) Windows debug 6.3.9600.17029 AMD64 Version
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [C:\Users\Ken\Desktop\060814-6578-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol of validation of the path summary *.
  Location of response time (ms)
  Deferred SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
  Symbol search path is: SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is:
  Windows 8 Kernel Version 9200 MP (8 procs) free x 64
  Product: WinNt, suite: TerminalServer SingleUserTS
  By: 9200.16864.amd64fre.win8_gdr.140309 - 1509
  Computer name:
  Core = 0xfffff802 'a 5088, 000 PsLoadedModuleList = 0xfffff802' 50b56aa0
  The debugging session: 17:49:48.785 Sunday, June 8, 2014 (UTC - 04:00)
  System Uptime: 0 days 0:01:33.409
  Loading the kernel symbols
  ...............................................................
  ................................................................
  ............................
  Loading user symbols
  Loading unloaded module list
  .........
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck A, {0, 2, 1, fffff80250944722}

  WARNING: Unable to verify timestamp for iaStorA.sys
  ERROR: Module load completed but symbols can be loaded for iaStorA.sys
  Probably caused by: iaStorA.sys (iaStorA + 6710a)

  Follow-up: MachineOwner
  ---------

  0: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  IRQL_NOT_LESS_OR_EQUAL (a)
  An attempt was made to access an address pageable (or completely invalid) to a
  application interrupt level (IRQL) that is too high.  It is usually
  caused by drivers using a wrong address.
  If a kernel debugger is available, download the stack trace.
  Arguments:
  Arg1: 0000000000000000, referenced memory
  Arg2: 0000000000000002, IRQL
  Arg3: 0000000000000001, bit field:
  bit 0: value 0 = read operation, 1 = write operation
  bit 3: value 0 = not an enforcement operation, 1 = performance operation (only on chips that support this level of State)
  Arg4: fffff80250944722, address memory

  Debugging information:
  ------------------

  WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff80250be2168
  GetUlongFromAddress: cannot read fffff80250be21f8
  Paged 0000000000000000

  CURRENT_IRQL: 2

  FAULTING_IP:
  NT! KeAcquireInStackQueuedSpinLock + 32
  fffff802'50944722 488711 xchg rdx, qword ptr [rcx]

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

  BUGCHECK_STR: AV

  Nom_processus: System

  ANALYSIS_VERSION: 6.3.9600.17029 (debuggers (dbg). 140219-1702) amd64fre

  DPC_STACK_BASE: FFFFF80251BE3FB0

  TRAP_FRAME: fffff80251bdd730-(.trap 0xfffff80251bdd730)
  NOTE: The frame trap does contain not all registers.
  Some registry values can be set to zero or incorrect.
  Rax = 0000000000000002 rbx = 0000000000000000 rcx = 0000000000000000
  RDX = fffff80251bdd930 rsi = 0000000000000000 rdi = 0000000000000000
  RIP = fffff80250944722 rsp = fffff80251bdd8c8 rbp = fffff80251bddab0
  R8 = fffff80251bdd930 r9 = fffff880019a3800 r10 = fffff80251bdd870
  R11 = 0000000000000002 r12 = 0000000000000000 r13 = 0000000000000000
  R14 = 0000000000000000 r15 = 0000000000000000
  iopl = 0 nv up ei pl zr po nc
  NT! KeAcquireInStackQueuedSpinLock + 0x32:
  fffff802'50944722 488711 xchg rdx, qword ptr [rcx] ds:00000000'00000000 =?
  Reset the default scope

  LAST_CONTROL_TRANSFER: from fffff802508e3769 to fffff802508e4440

  STACK_TEXT:
  fffff802 '51bdd5e8 fffff802' 508e3769: 00000000' 0000000 a 00000000'00000000 00000000'00000002 00000000'00000001: nt! KeBugCheckEx
  ' fffff802 '51bdd5f0 fffff802' 508e1fe0: 00000000 ' 00000001 fffff802 ' 51bdd930 ffff38d7 '6a9e1d00 fffff802' 51bdd730: nt! KiBugCheckDispatch + 0 x 69
  fffff802'51bdd730 fffff802'50944722: fffff880 '0176610a 00000000 00000000' fffffa80' 0d4cdb90 00000000'00000002: nt! KiPageFault + 0 x 260
  ' fffff802 '51bdd8c8 fffff880' 0176610a: 00000000 ' 00000000 fffffa80 ' 0d4cdb90 00000000'00000002 00000000'00000000: nt! KeAcquireInStackQueuedSpinLock + 0x32
  fffff802'51bdd8d0 00000000' 00000000: fffffa80'0d4cdb90 00000000'00000002 00000000'00000000 fffffa80 0'c 770500: iaStorA + 0x6710a

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  iaStorA + 6710 has
  fffff880'0176610 has?              ???

  SYMBOL_STACK_INDEX: 4

  SYMBOL_NAME: iaStorA + 6710 has

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: iaStorA

  Nom_image: iaStorA.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 51fb0de8

  FAILURE_BUCKET_ID: AV_iaStorA + 6710 has

  BUCKET_ID: AV_iaStorA + 6710 has

  ANALYSIS_SOURCE: KM

  FAILURE_ID_HASH_STRING: km:av_iastora + 6710 has

  FAILURE_ID_HASH: {f733faf2-d2a8-1b11-9fa3-afbe5930de67}

  Follow-up: MachineOwner
  ---------

• Hello, Muse stops at each record. He met a pop error and stops.

  Hello, whenever I record on Muse, the software had a pop error and stops, error #3103, and then on the other each time I try.

  I'm in monthly release. What can I do to stop this problem? Thank you.

  Please send the journal of muse and muse file to [email protected] with this forum link in the subject line.

  The MuseLog.txt are located in your ' my documents ' (Windows) or "Documents" (Mac).

  Thank you

  Sanjit

• Why do I get the message "a script on this page may be busy, or it may have stopped responding." You can stop the script now, or you can continue to s?

  I have 3 windows firefox with several tabs in each, but the main (and sometimes others) gel and prevent navigation showing a box indicating
  "A script on this page may be busy, or it may have stopped responding." You can stop the script now, or you can continue to see if the script ends.

  "Script: chrome://fctoolbar841468a1d7f44bd384e6bb0f13a06c64/content/fctoolbar.js:1.
  To stop the script? I think it's not to do with Google Chrome but FF model internal to web pages. Thus, a deficiency in the FF, inability to cope, but with what? As far as I KNOW, all software is up-to-date. I have restarted FF, restarted the laptop, but has not changed the FF problem. What is the cause?

  This is probably caused by a toolbar that installs on your version of Firefox. Most of the scripts that begin with chrome:// are extensions.
  I think that this is very probably the Nectar Search Toolbar , which raises the question, because it seems to be the only toolbar installed on your computer.

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables certain parameters, disables most Add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • In Firefox 29,0 and above, click on the menu button

    

    click Help

    

    then select restart with disabled modules.

  • In previous versions of Firefox, click on the Firefox button in the upper left of the Firefox window and click help (or click on help in the Menu bar, if you do not have a Firefox button) and click on restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

• Select Fire FTP script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script ends. Script: chrome://fireftp/content/js/local/localTree.js:134

  After the last update on Firefox FTP fire does not open easily. I get this message more than once. First time I had problems with the selection of FTP
  A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script ends.

  Script: chrome://fireftp/content/js/local/localTree.js:134

  Try to update your module:

  • Look for new versions of your modules

  Check and tell if its working.

• A script on this page may be busy or have stopped responding. You can stop the script now or wait to see if the script concludes its execution. Script: chrome://fflinkfilter/content/ikavlinkcollection.js:15

  I am currently using Windows 7 Home premium. I have a kaspesky 2010 installed on pc and navigo on the Internet with firefox 3.6.
  Unfortunately, every time I leave a notice:
  A script on this page may be busy or have stopped responding. You can stop the script now or wait to see if the script concludes its execution.

  Script: chrome://fflinkfilter/content/ikavlinkcollection.js:15

  The biggest problem is that soar of CPU consumption to values very high but blocked for regular activities... sad.gif

  Do you know if or how you can solve?

  This is a problem with an extension: fflinkfilter

  See Troubleshooting extensions and themes and problems of hardware acceleration to resolve common Firefox problems