Unhandled exception JIT debugging at the launch of the game

Similar Questions

• Restart causes the 'system thread unhandled exception '.

  Freezes in Windows 8.  Restart causes the 'system thread unhandled exception '. Windows restores successfully to earlier restore point start, but the questions is recurring.

  3 crashes so far because the computer was purchased at the end of February, 2014.

  All 3 minidumps are available at:

  https://onedrive.live.com/redir?RESID=7B6D641161EAE33%211120

  This disturbs my work whenever I need to reactivate my license of office until I can get back to where I was.

  How can I avoid this problem happen again and still be able to fully use my computer?

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
  It is a very common bugcheck.  Usually the PIN address of exception
  the driver/function that caused the problem.  Always note this address
  and the date of the picture link / driver that contains this address.
  Some common problems are the exception code 0 x 80000003.  This means a hard
  coded breakpoint or assertion was hit, but this system has been started
  / /NODEBUG.  It is not supposed to happen as developers should never have
  breakpoints coded hard in retail code, but...
  In this case, make sure a debugger must be connected and the
  system startup/DEBUG.  This will we will see why this breakpoint is
  happening.
  Arguments:
  Arg1: ffffffffc0000005, unhandled exception code
  Arg2: 0000000000000000, the address that the exception occurred at
  Arg3: fffff880031a2938, address of Exception report
  Arg4: fffff880031a2170, address of the context record

  USTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

  Nom_processus: System

  CURRENT_IRQL: 0

  Error_code: (NTSTATUS) 0xc0000005 - the instruction at 0 x % lx 08 referenced memory at 0 x % 08 lx. The

  memory could not be %s.

  EXCEPTION_PARAMETER1: 0000000000000008

  EXCEPTION_PARAMETER2: 0000000000000000

  WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff800d4fd3168
  Unable to get nt! MmPoolCodeStart
  Unable to get nt! MmPoolCodeEnd
  0000000000000000

  FOLLOWUP_IP:
  nvkflt + 37 c 2
  fffff880'03e187c2?              ???

  FAILED_INSTRUCTION_ADDRESS:
  + 37 c 2
  00000000'00000000?              ???

  STACK_TEXT:
  fffff880 '031a2b78 fffff880' 03e187c2: fffffa80'0d67d950 fffff880 '031a2e00 fffffa80' 0d67d950

  00000000'00230047: 0 x 0
  fffff880 '031a2b80 fffffa80' 0d67d950: fffff880 '031a2e00 fffffa80' 0d67d950 00000000'00230047

  00000000' 00000000: nvkflt + 0x37c2
  fffff880 '031a2b88 fffff880' 031a2e00: fffffa80'0d67d950 00000000'00230047 00000000'00000000

  00000000 00000001': 0xfffffa80'0d67d950
  fffff880 '031a2b90 fffffa80' 0d67d950: 00000000'00230047 00000000'00000000 00000000'00000001

  00000000' 00000000: 0xfffff880'031a2e00
  fffff880 '031a2b98 00000000' 00230047: 00000000'00000000 00000000'00000001 00000000'00000000

  fffff8a0'05c3b700: 0xfffffa80'0d67d950
  fffff880 '031a2ba0 00000000' 00000000: 00000000'00000001 00000000'00000000 fffff8a0'05c3b700

  fffff880'031a2c78: 0 x 230047

  nvkflt.sys

  Driver Description: Filter driver NVIDIA Graphics

  Driver update site: http://www.nvidia.com/Download/index.aspx

  Make sure all your display drivers are updated and if this does not work, uninstall and perform a clean installation.

  Guide on how to install the NVIDIA Windows 7/Windows Vista display driver (even in windows 8)

  http://NVIDIA.custhelp.com/app/answers/detail/A_ID/2900/~/guide-on-how-to-install-the-NVIDIA-display-driver-under-Windows-7%2Fwindows-Vista

  Good luck

• A question about ROLLBACK and in stored subprograms unhandled Exceptions

  Hello

  Oracle version:  Enterprise Edition Release 11.2.0.1.0 - 64 bit

  OS :   Linux Fedora Core 17 (X86_64)

  In Chapter 11 of the PL/SQL online, here's what oracle says about The unhandled Exceptions :

  If a stored subprogram stops with an unhandled exception, PL/SQL does not restore of database changes made by the subprogramme.

  I tried the following code:

  code

  HOST clear; SET SQLBLANKLINES ALTER SESSION SET PLSQL_WARNINGS = ' ENABLE: ALL '; DROP TABLE tmptab; CREATE TABLE tmptab (n NUMBER); CREATE or REPLACE PACKAGE pkg1_pkg DEFINE AUTHID AS EXCEPTION MYEXCEPTION. PRAGMA EXCEPTION_INIT (MYEXCEPTION,-20001); END; / DISPLAY ERRORS; -It is a subroutine that exists -with an exception unhandled CREATE OR REPLACE PROCEDURE mytestProc DEFINE AUTHID IS BEGIN INSERT INTO tmptab (n) VALUES (100); -Unhandled exception does a ROLLBACK -which annuls the previous INSERT statement

  RAISE pkg1_pkg. MYEXCEPTION;

  END mytestProc;

  /

  DISPLAY ERRORS;

  
  

  
  

  BEGIN

  mytestProc();

  END;

  /

  
  

  
  

  SELECT * FROM tmptab;

  And here is the result

  BEGIN * ERROR on line 1: ORA-20001: ORA-06512: at "TRAINING. MYTESTPROC', line 6 ORA-06512: at line 2 no selected line

  The fact that SELECT * FROM tmptab gives: no selected line indicates that the exception unhandled in the stored routine myTestProc is doing a ROLLBACK for the INSERT statement in the tmptab table.

  So I do not understand why in the documentation noted that no ROLLBACK is not done.

  Could someone kindly do some clarification on this?

  Thanks in advance,

  Kind regards

  Dariyoosh

  Hello

  If a stored subprogram exits with an unhandled exception, PL/SQL does not restore changes to the database made by the subprogramme.

  What is happening here, it is an anonymous block (which is not stored) stops with an unhandled exception, and who restores the uncommitted transactions.

  I created a procedure to see how many lines is in tmptab:

  CREATE OR REPLACE PROCEDURE tmptab_cnt (in_txt IN VARCHAR2)
  DEFINE AUTHID
  AS
  n PLS_INTEGER;
  BEGIN
  SELECT COUNT (*)
  N
  OF tmptab;

  dbms_output.put_line (n
  || "lines of tmptab in.
  || in_txt
  );
  END tmptab_cnt;
  /

  and called it of your procedure with your anonymous block:

  CREATE OR REPLACE PROCEDURE mytestProc
  DEFINE AUTHID
  IS
  BEGIN
  INSERT INTO tmptab (n) VALUES (100);
  tmptab_cnt ("mytestProc");

  RAISE pkg1_pkg. MYEXCEPTION;
  END mytestProc;
  /
  DISPLAY ERRORS;

  BEGIN
  mytestProc();
  EXCEPTION
  WHILE OTHERS THEN
  tmptab_cnt (anonymous"block" ");
  LIFT;
  END;
  /

  The result of this is:

  ...

  Created procedure.

  No errors.
  1 lines in tmptab in mytestProc

  
  1 lines in block anonymous tmptab
  BEGIN
  *
  ERROR on line 1:
  ORA-20001:
  ORA-06512: at line 6

  no selected line

  As you can see, there is 1 row in the table after that the procedure back to the anonymous block.

  Thanks for posting such a complete and clear test script; that really helps.

  How put you in the form code, with green background and title?

• FRM - 40735:when - button-trigger pressed raised unhandled exception ORA-24247

  Hi all
  
  I use the 10g release2 form I'm having a problem
  When I use the following stored procedure in form so I get this
  error.
  FRM - 40735:when - button-trigger pressed raised unhandled exception ORA-24247
  but the same code works fine when I use in SQLPLUS.

  CREATE OR REPLACE PROCEDURE mail_attach (dir1 VARCHAR2, filename VARCHAR2)
  AS
    l_output  utl_file.file_type;
    l_file       RAW(32767);
    l_size       NUMBER;
    BLOCK       NUMBER;
    b          BOOLEAN;
    l_start NUMBER := 1;
    TYPE ARRAY IS TABLE OF VARCHAR2(255);
    l_data ARRAY := ARRAY([email protected]');
   BEGIN
    UTL_FILE.FGETATTR(dir1, filename, b, l_size, BLOCK);
    l_output := utl_file.fopen('BACKUP', 'code.txt', 'r' );
    utl_file.get_raw(l_output, l_file, l_size);
    utl_file.fclose( l_output );
    FOR i IN l_start .. l_data.COUNT
    LOOP
      UTL_MAIL.SEND_ATTACH_RAW (
          sender   => 'Mailer',
          recipients => l_data(i),
          subject   => 'Data for ' || TO_CHAR((SYSDATE-1),'DD-MON-YYYY'),
          attachment => l_file,
          message   => 'Dear User, Please find attached the upload
  data for the period mentioned in the subject line.',
          att_inline => FALSE,
          att_filename => filename);
         l_start := l_start + 1;
    END LOOP;
   END;

  and it is used in form release button when pressed.

  BEGIN
    mail_attach('UTL_PATH','code.txt');
    
       message('FIle send successfully');
       message('File send successfully');
  
  END;

  Hello

  Try the following...

  SQL> show user;
  USER is "SYS"
  SQL> GRANT EXECUTE ON DBMS_FGA TO MAIL;
  
  Grant succeeded.
  
  SQL> GRANT CREATE PROCEDURE, DROP ANY PROCEDURE TO MAIL;
  
  Grant succeeded.
  
  SQL> GRANT EXECUTE ON UTL_TCP TO MAIL;
  
  Grant succeeded.
  
  SQL> GRANT EXECUTE ON UTL_SMTP TO MAIL;
  
  Grant succeeded.
  
  SQL> GRANT EXECUTE ON UTL_ENCODE TO MAIL;
  
  Grant succeeded.
  
  SQL> GRANT EXECUTE ON DBMS_NETWORK_ACL_ADMIN TO MAIL;
  
  Grant succeeded
  

  Sarah.

• during the game Dungeon Siege Broken World, it stops the game and I get the exception error

  Original title: exception errors

  during the game Dungeon Siege Broken World, it stops the game and I get the error of the exception that the program brings together except for the tour program off that I have to start

  Hi irishlaird,

  1. What is the full error message that you receive?

  2. did you of recent changes on the computer?

  Check out the links and try the steps mentioned below.

  http://garage.gaspowered.com/?q=node/9419

  http://garage.gaspowered.com/?q=node/6386

  http://garage.gaspowered.com/?q=node/5573

  http://garage.gaspowered.com/?q=node/5357

  If the previous step fails, then validate your request on the website of the game provider.

  http://garage.gaspowered.com/?q=Forum/169

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Just bought a new all in one printer but when I try to scan something I get the error message "JIT debugging of unhandled exception message."

  original title: help needed please...

  I recently bought a new all in one printer and now whenever I try to import something I scanned into my computer in the graphics of MY CRAFT STUDIO program all that I get, it's the exception message not support JIT debugging.

  I tried to disable in Internet Options, but he did not make a difference.  Any help will be greatly appreciated

  Contact support or ask in the forums of the LIM printer software or seller.

• I get the message "just-in-time (JIT) debugging" whenever I have access to the program to my server

  See the end of this message for details on the call
  just-in-time (JIT) debugging instead of this dialog box.

  The exception text *.
  System.Data.SyntaxErrorException: Syntax error: operand missing after "ayu" operator.
  at System.Data.ExpressionParser.Parse)
  to System.Data.DataExpression... ctor (DataTable table, String expression, Type type)
  at System.Data.DataTable.Select (String filterExpression)
  at CGSoftUGMaintenances1.frmUserGroupSecurity.ugPopulateGroup (object tvParentNode, String Refcompte, String GroupParent)
  at CGSoftUGMaintenances1.frmUserGroupSecurity.ugPopulateUser (Object tvParentNode, String Refcompte, String GroupName)
  at CGSoftUGMaintenances1.frmUserGroupSecurity.ugPopulateGroup (object tvParentNode, String Refcompte, String GroupParent)
  at CGSoftUGMaintenances1.frmUserGroupSecurity.ugPopulateDataAccount (Object tvParentNode, String AccountParentID)
  at CGSoftUGMaintenances1.frmUserGroupSecurity.ugPopulateDataAccount (Object tvParentNode, String AccountParentID)
  at CGSoftUGMaintenances1.frmUserGroupSecurity.frmUserGroupPermission_Load (Object sender, EventArgs e)
  at System.Windows.Forms.Form.OnLoad (ByVal e As EventArgs)
  at System.Windows.Forms.Control.CreateControl (Boolean fIgnoreVisible)
  at System.Windows.Forms.Control.CreateControl)
  at System.Windows.Forms.Control.WmShowWindow (Message & m)
  at System.Windows.Forms.Control.WndProc (Message & m)
  at System.Windows.Forms.Form.WndProc (Message & m)
  at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

  Loading assemblies *.
  mscorlib
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18444 built by: FX451RTMGDR
  Code: file:///C:/Windows/Microsoft.NET/Framework64/v4.0.30319/mscorlib.dll
  ----------------------------------------
  CGSoft_Management_Console
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  Code: file:///D:/CGSoft/Program/CGSoft%20Management%20Console/CGSoft_Management_Console.exe
  ----------------------------------------
  Microsoft.VisualBasic
  Assembly version: 10.0.0.0
  Win32 Version: 11.0.50938.18408 built by: FX451RTMGREL
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/Microsoft.VisualBasic/v4.0_10.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
  ----------------------------------------
  System
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
  ----------------------------------------
  System.Core
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
  ----------------------------------------
  System.Windows.Forms
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
  ----------------------------------------
  System.Drawing
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
  ----------------------------------------
  System.Runtime.Remoting
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Remoting/v4.0_4.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
  ----------------------------------------
  CGSoftSVComponentServices
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/CGSoftSVComponentServices/v4.0_1.0.0.0__bcc94e894d7d6067/CGSoftSVComponentServices.dll
  ----------------------------------------
  CGSoftSVDataServices
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/CGSoftSVDataServices/v4.0_1.0.0.0__8b330c8f9a19eee2/CGSoftSVDataServices.dll
  ----------------------------------------
  CGSoftSVCrystalReportServices
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/CGSoftSVCrystalReportServices/v4.0_1.0.0.0__2eec9c26545771f4/CGSoftSVCrystalReportServices.dll
  ----------------------------------------
  CGSoftSVUIServices
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/CGSoftSVUIServices/v4.0_1.0.0.0__df7cc3d2c28dda8c/CGSoftSVUIServices.dll
  ----------------------------------------
  System.Data
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_64/System.Data/v4.0_4.0.0.0__b77a5c561934e089/System.Data.dll
  ----------------------------------------
  CGSoftSVTransactionServices
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/CGSoftSVTransactionServices/v4.0_1.0.0.0__9d63caca3e70a9af/CGSoftSVTransactionServices.dll
  ----------------------------------------
  CGSoftSVIntuitiveHelp
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/CGSoftSVIntuitiveHelp/v4.0_1.0.0.0__33d3177752e863ae/CGSoftSVIntuitiveHelp.dll
  ----------------------------------------
  System.Xml
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
  ----------------------------------------
  System.DirectoryServices
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.DirectoryServices/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.DirectoryServices.dll
  ----------------------------------------
  CGSoftAFAccessControl
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  Code: file:///D:/CGSoft/Access/CGSoftAFAccessControl.dll
  ----------------------------------------
  System.Configuration
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
  ----------------------------------------
  System.Transactions
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_64/System.Transactions/v4.0_4.0.0.0__b77a5c561934e089/System.Transactions.dll
  ----------------------------------------
  System.EnterpriseServices
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_64/System.EnterpriseServices/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.EnterpriseServices.dll
  ----------------------------------------
  System.Numerics
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Numerics/v4.0_4.0.0.0__b77a5c561934e089/System.Numerics.dll
  ----------------------------------------
  System.Web
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18446 built by: FX451RTMGDR
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_64/System.Web/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Web.dll
  ----------------------------------------
  CGSoftUGMaintenances1
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  Code: file:///D:/CGSoft/Program/CGSoft%20Management%20Console/CGSoftUGMaintenances1.DLL
  ----------------------------------------
  CustomMarshalers
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_64/CustomMarshalers/v4.0_4.0.0.0__b03f5f7f11d50a3a/CustomMarshalers.dll
  ----------------------------------------

  JIT debugging *.
  To enable just-in-time (JIT) debugging, the .config file for this
  application or computer (machine.config) must have the
  jitDebugging value set in the system.windows.forms section.
  The application must also be compiled with debugging
  permit.

  For example:

  
     
  

  When JIT debugging is enabled, an unhandled exception
  will be sent to the JIT debugger registered on the computer
  rather than be handled by this dialog box.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• During the installation of the software is Unhandled Exception has occurred in your application

  Moose title: TRY to INSTALL the SOFTWARE to RECEIVE error MESSAGES!

  I get a Message that says: > "has an Unhandled Exception has occurred in your application, if you click on > continue Will ignore this error and attempt to continue, (Itried this > don't continue" ")" also says "internal error cannot Open The Shared > memory Region" when I CLICK on 'details' below is the Message: > see the end of this message for details on the call > just-in-time (JIT) debugging instead of this dialog box. > * text Exception * > internal error: cannot open the shared memory region. > * Load assemblies * > mscorlib > Assembly Version: 2.0.0.0 > Win32 Version: 2.0.50727.4214 (VistaSP2GDR.050727 - 4200) > CodeBase >: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll >---> SeoAutomator > Assembly Version: 1.5.6.0 > Win32 Version: 1.5.6.0 > CodeBase: > e file:///C:/Program%20Files/StephenHawkins/SEO%20Link%20Builder/SeoAutomator.ex >---> system > Assembly Version: 2.0.0.0 > Win32 Version: 2.0.50727.4215 (VistaSP2GDR.050727 - 4200) > CodeBase: > file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.d he's >---> System.Windows.Forms > Assembly Version : 2.0.0.0 > Win32 version: 2.0.50727.4214 (VistaSP2GDR.050727 - 4200) > CodeBase: > file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c56193 4e089/System.Windows.Forms.dll >---> System.Drawing > Assembly Version: 2.0.0.0 > Win32 Version: 2.0.50727.4016 (NetFxQFE.050727 - 4000) > CodeBase: > file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/-System.Drawing.dll >---> System.Configuration > Assembly Version: 2.0.0.0 > Win32 Version: 2.0.50727.4016 (NetFxQFE.050727 - 4000) > CodeBase: > file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d 50a3a/System.Configuration.dll >---> System.Xml > Assembly Version : 2.0.0.0 > Win32 version: 2.0.50727.4016 (NetFxQFE.050727 - 4000) > CodeBase: > file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/Syst em. XML.dll >-> PureComponents.ActionSet > Assembly Version: 2009.1.310.0 > Version Win32: 2009.1.310.0 > CodeBase: > file:///C:/Program%20Files/StephenHawkins/SEO%20Link%20Builder/PureComponents. ActionSet.DLL >--> PureComponents.EntrySet > Assembly Version: 2009.1.310.0 > Version Win32: 2009.1.310.0 > CodeBase: > file:///C:/Program%20Files/StephenHawkins/SEO%20Link%20Builder/PureComponents. EntrySet.DLL >--> PureComponents.ScheduleSet > Assembly Version: 2009.1.621.0 > Version Win32: 2009.1.621.0 > CodeBase: > file:///C:/Program%20Files/StephenHawkins/SEO%20Link%20Builder/PureComponents. ScheduleSet.DLL >---> System.Data.SqlServerCe > Assembly Version: 3.5.1.0 > Win32 Version: 3.5.8080.0 > CodeBase: > file:///C:/Windows/assembly/GAC_MSIL/System.Data.SqlServerCe/3.5.1.0__89845dcd 8080cc91/System.Data.SqlServerCe.dll >---> System.Data > Assembly Version: 2.0.0.0 > Win32 Version: 2.0.50727.4016 (NetFxQFE.050727 - 4000) > CodeBase: > file:///C:/Windows/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/Syste m.Data.dll >---> System.Transactions > Assembly Version: 2.0.0.0 > Win32 Version: 2.0.50727.4016 (NetFxQFE.050727 - 4000) > CodeBase: > file:///C:/Windows/assembly/GAC_32/System.Transactions/2.0.0.0__b77a5c561934e0 89/System.Transactions.dll >---> > * JIT debugging * > to enable debugging , the file .config for this just-in-time (JIT) > application or computer (machine.config) must have the > jitDebugging value set in the system.windows.forms section. > The application must also be compiled with debugging > enabled. > For example: > > > > JIT debugging is enabled, any unhandled exception > will be sent to the JIT debugger registered on the computer > rather than be handled by this dialog box. > >
  CAN SOMEONE HELP ME?

  Hi andrewhoward,

  1. What program are you trying to install on the computer?
  2. Are you having similar problem when installing other programs on the computer?
  3. Did you the latest changes on the computer?
  4. What is the version of Windows installed on the computer?

  Your question does contain all the required information necessary for us to help you. Please provide more relevant information to continue troubleshooting as a result.

  How to ask a question

  http://support.Microsoft.com/kb/555375

  Problems installing and uninstalling programs on Windows computers
  http://support.Microsoft.com/kb/2438651

• I get the message "just-in-time (JIT) debugging" whenever I start my computer

  Original title: salvation when windows starts, there is amessege came I, but it in body provide clarification

  Salvation during the windows startup this messege is coming

  See the end of this message for details on the call
  just-in-time (JIT) debugging instead of this dialog box.

  The exception text *.
  System.FormatException: The String was not recognized as a valid DateTime.
  at System.DateTimeParse.Parse (String s, DateTimeFormatInfo dtfi, DateTimeStyles style)
  to libTMachInfo.CMachInfo.GetFirstBootDate (DateTime & dtFirstBoot)
  to the SST. TSSForm.ReadSettings)
  to the SST. TSSForm.TSSForm_Load (Object sender, EventArgs e)
  at System.Windows.Forms.Form.OnLoad (ByVal e As EventArgs)
  at System.Windows.Forms.Control.CreateControl (Boolean fIgnoreVisible)
  at System.Windows.Forms.Control.CreateControl)
  at System.Windows.Forms.Control.WmShowWindow (Message & m)
  at System.Windows.Forms.Control.WndProc (Message & m)
  to the SST. TSSForm.WndProc (Message & m)
  at System.Windows.Forms.Control.ControlNativeWindow.WndProc (Message & m)
  at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

  Loading assemblies *.
  mscorlib
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.4206 (VistaSP2GDR.050727 - 4200)
  Code: file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/mscorlib.dll
  ----------------------------------------
  ToshibaServiceStation
  Assembly version: 2.0.3378.30769
  Win32 version: 2.0.0.5
  CodeBase: file:///C:/Program%20Files%20(x86) /Toshiba/TOSHIBA%20Service%20Station/ToshibaServiceStation.exe
  ----------------------------------------
  System.Windows.Forms
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.4016 (NetFxQFE.050727 - 4000)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
  ----------------------------------------
  System
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.4205 (VistaSP2GDR.050727 - 4200)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
  ----------------------------------------
  System.Drawing
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.4016 (NetFxQFE.050727 - 4000)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
  ----------------------------------------
  PluginLib
  Assembly version: 2.0.3378.30753
  Win32 version: 2.0.0.1
  CodeBase: file:///C:/Program%20Files%20(x86) /Toshiba/TOSHIBA%20Service%20Station/PluginLib.DLL
  ----------------------------------------
  System.Xml
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.4016 (NetFxQFE.050727 - 4000)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
  ----------------------------------------
  libTMachInfo
  Assembly version: 2.0.3378.30753
  Win32 version: 2.0.0.0
  CodeBase: file:///C:/Program%20Files%20(x86) /Toshiba/TOSHIBA%20Service%20Station/libTMachInfo.DLL
  ----------------------------------------
  System.Configuration
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.4016 (NetFxQFE.050727 - 4000)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
  ----------------------------------------
  y3fsuaxk
  Assembly version: 2.0.3378.30753
  Win32 Version: 2.0.50727.4205 (VistaSP2GDR.050727 - 4200)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
  ----------------------------------------
  7zlwwoit
  Assembly version: 2.0.3378.30753
  Win32 Version: 2.0.50727.4205 (VistaSP2GDR.050727 - 4200)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
  ----------------------------------------

  JIT debugging *.
  To enable just-in-time (JIT) debugging, the .config file for this
  application or computer (machine.config) must have the
  jitDebugging value set in the system.windows.forms section.
  The application must also be compiled with debugging
  permit.

  For example:

  
     
  

  When JIT debugging is enabled, an unhandled exception
  will be sent to the JIT debugger registered on the computer
  rather than be handled by this dialog box.

  The error is in the Toshiba Service Station program. Try unininstalling and download the latest version

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/download.jsp?CT=DL&soID=2460122&ref=EV

  Or just uninstall it if you do not need.

  Or uninstall and get email update notifications by registering via this Web page.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=communicate&SN=false

• Unhandled exception has occurred in your application. If you click on continue, then the application will ignore and continue.

  

  OT: How to fix this?

  See the end of this message for details on the call
  just-in-time (JIT) debugging instead of this dialog box.

  The exception text *.
  System.Net.WebException: The remote name could not be resolved: 'peeracon.com '.
  to System.Net.HttpWebRequest.GetResponse)
  at WindowsFormsApplication1.Form1.GetHtmlPageText (String url)
  at WindowsFormsApplication1.Form1.Form1_Load (Object sender, EventArgs e)
  at System.Windows.Forms.Form.OnLoad (ByVal e As EventArgs)
  at System.Windows.Forms.Form.OnCreateControl)
  at System.Windows.Forms.Control.CreateControl (Boolean fIgnoreVisible)
  at System.Windows.Forms.Control.CreateControl)
  at System.Windows.Forms.Control.WmShowWindow (Message & m)
  at System.Windows.Forms.Control.WndProc (Message & m)
  at System.Windows.Forms.ScrollableControl.WndProc (Message & m)
  at System.Windows.Forms.Form.WmShowWindow (Message & m)
  at System.Windows.Forms.Form.WndProc (Message & m)
  at System.Windows.Forms.Control.ControlNativeWindow.OnMessage (Message & m)
  at System.Windows.Forms.Control.ControlNativeWindow.WndProc (Message & m)
  at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

  Loading assemblies *.
  mscorlib
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.1008 (RTMGDR.030319 - 1000)
  Code: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
  ----------------------------------------
  WindowsFormsApplication1
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  Code: file:///C:/Windows/bat_starter.exe
  ----------------------------------------
  System.Windows.Forms
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.1002 built by: RTMGDR
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
  ----------------------------------------
  System.Drawing
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.1001 built by: RTMGDR
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
  ----------------------------------------
  System
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.1001 built by: RTMGDR
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
  ----------------------------------------
  System.Configuration
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.1015 (RTMGDR.030319 - 1000)
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
  ----------------------------------------
  System.Xml
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.1015 built by: RTMGDR
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
  ----------------------------------------

  JIT debugging *.
  To enable just-in-time (JIT) debugging, the .config file for this
  application or computer (machine.config) must have the
  jitDebugging value set in the system.windows.forms section.
  The application must also be compiled with debugging
  permit.

  For example:

  
     
  

  When JIT debugging is enabled, an unhandled exception
  will be sent to the JIT debugger registered on the computer
  rather than be handled by this dialog box.

  Hey, Ace,

  1. what application are you running?
  2. when exactly you get the error message?

  If you experience this problem when you install Visual Studio, I suggest you post in the MSDN forums.
  http://social.msdn.Microsoft.com/forums/vstudio/en-us/home?category=netdevelopment

  I hope this helps. Let us know if you have other problems with Windows in the future.

• Microsoft netframework box appears trying to download photo gallery error 1706and in the box there is no jit debugging cannot get rid of this box

  abox with microsoft net frameworkhas skipped uptrying Photo Gallery of todownload the box refers to the jit debugging is enabled anyunhadled exception is sent to thejit also debugger error 1706 is here

  Hi Robin,

  Thanks for posting. You give an appropriate response can you give me a little more information. This is when you open the photo gallery you have a problem of .net framework, or the box of the .net framework opens itself, then photo gallery shortly after? Also when the box appears, didn't he close? You can provide additional information will greatly help us to diagnose this problem. Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• BSOD "driver irql not less or equal" and the "thread of unhandled exception" messages

  Hi all

  Since I got my laptop motherboard replaced I started having BSOD issues with "driver irql not less or equal ' and"unhandled exception thread"messages. They appear very often (about once a week), but it's annoying anyway :) I failed to note any regular pattern in BSOD problem.

  I've read the description of similar problems, so I guess that the problem is a faulty driver. Unfortunately my PC skills are not sufficiently advanced to solve the problem on my own.

  Operating system

  64-bit Windows 8
  CENTRAL PROCESSING UNIT
  Intel Core i5 3210M @ 2.50 GHz 61 ° C
  Ivy Bridge 22nm technology
  RAM
  6,00 GB Dual-Channel DDR3 @ 665 MHz (9-9-9-24)
  Motherboard
  Acer VA50_HC_CR (U3E1)
  Graphics
  Monitor generic PnP (1366x768@60Hz)
  Graphics Intel HD 4000 (Acer incorporated [ALI])
  Storage
  465 GB TOSHIBA MQ01ABD050 (SATA) 39 ° C
  Optical drives
  HL-DT-ST DVDRAM GT70N
  Audio
  Realtek High Definition Audio

  Antivirus: Kaspersky Crystal

  The Minidump files: https://onedrive.live.com/redir?resid=A32073C9ADCE674! 106 & authkey =! AEZQAT-sNxtbU1Y & ithint = the file % 2crar

  Thanks in advance.

  The debugging session: killed Sep 16 01:29:43.916 2014 (UTC - 04:00)
  System Uptime: 0 days 0:30:20.630
  Loading the kernel symbols
  ...............................................................
  ................................................................
  ............................................................
  Loading user symbols
  Loading unloaded module list
  .......

  Use! analyze - v to obtain detailed debugging information.

  BugCheck D1, {b, 0, 0, fffff88005abf4b6}

  Cannot load the image \SystemRoot\system32\DRIVERS\athw8x.sys, 0n2 error Win32
  WARNING: Unable to verify timestamp for athw8x.sys
  ERROR: Module load completed but symbols can be loaded for athw8x.sys
  Probably caused by: athw8x.sys (athw8x + 684b 6 )

  Follow-up: MachineOwner

  Atheros Wireless LAN Driver Update.

  Loaded symbol image file: athw8x.sys
  Image path: \SystemRoot\system32\DRIVERS\athw8x.sys
  Image name: athw8x.sys
  Timestamp: Thu Jul 24 11:44 2012 (500EC2C0)

  First try ACER Support.

  http://us.Acer.com/AC/en/us/content/drivers

  Description of the driver: Atheros Wireless LAN driver

  Driver update site: http://www.Atheros.cz/

• Satellite Pro L630-L14 - the unhandled exception message

  I'm no expert, but I was hoping that someone could tell me how to get rid of / fix an error message thatI do me whenever I put on. The unhandled exception, said "access to PathC:\ProgrammeData\ToshibaEurope|. Registration\se fittings xml is denied. "

  I had a Trojan horse affecting this laptop two weeks ago and he (or hidden) wiping most of the material I had on this machine.
  Thanks I've got it running again, but this unhandled exception appears every time so I have to type Quit or he keeps coming back.

  I have no idea how to fix this problem. I checked everything and so has my son, remotely and this morning I ran MalwareBytes and allowed the two files, but I still get the message unhandled exception.
  It's annoying because I don't know if I need to have access to this road. If someone can tell me how do I cure this I would be grateful, but please keep in mind, I'm just a user with limited experience. It's a Satellite Pro L630-L14 and I got just TWO MONTHS! stevmk2

  Hello

  I think the problem is the Trojan horse you had. It was probably something has changed on the access to the files/folders. If you can t remove the Trojan with Antivirus software, you must reinstall the whole operating system. Therefore, you can use the recovery disk as described here:
  http://APS2.toshiba-tro.de/KB0/HTD9102IR0000R01.htm

  > I got it just TWO MONTHS!
  Who makes no difference, how is the laptop. This viral infection can happen after a few days and it s depending on your antivirus software you use, but it has absolutely nothing to do with the brand of laptop.

• Pursuant to the window, we call exe, created in wpf, we got an error like ' an unhandled exception microsorft net framework exception due to the jilplayer.exe ' [6034]

  Pursuant to the window, we call exe, created in wpf, we got an error like ' an unhandled exception microsorft net framework exception due to the jilplayer.exe ' [6034]

  Hello Kumar,

  The question you have posted is related to Windows Presentation Foundation (WPF). The right place to contact you would be supported in MSDN. I suggest you to check with the help of MSDN for more information.

  http://social.msdn.Microsoft.com/forums/en-us/newThread?category=netdevelopment&Forum=WPF

• Error - unhandled exception occurred in file 0 x 12423 is missing on your computer every time I open the program.

  Original title: unhandled exception occurred in file 0 x 12423 is missing on your computer.

  It shows this message everytime I open the program I want to run for some reason any, please hlp...

  Hi FrancescoAbbate,

  You can follow this link & check if the problem persists.

  Cannot open EXE files

  
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows.

  
  Reference: cannot open files that have extensions such as.exe, .com, and.lnk on a Windows XP computer

  Hope the helps of information.
  Please post back and we do know.