uninstall the windows vista firewall so I can download BullGuard 8.0 without clash firewalls

Similar Questions

• Windows cannot start the windows Vista Firewall service

  My system is windows vista. When I tried to 'turn on the windows firewall' the message I got was ' Windows Firewall settings cannot be displayed because the associated service is not running. You want to start the windows firewall service? "I clicked Yes and another message came:" Windows is unable to start the service windows firewall. " Then I went "firewall" on the Start button and click on "Windows Firewall with advanced security on local computer" and a message with the error code: 0x6D9 came. Can I get the solution to this problem of anyone in this forum. I will be grateful.

  Thank you

  Hello

  You are running a third part of the internet security solution? Many of them include a firewall that is clean and disable the Windows Firewall. If this is the case, you should first disable this one before the attempt to initialize the Windows Firewall. It is not advisable to attempt to run two firewalls at the same time.

  If you have recently deleted (uninstalled) a third party solution, you may need to run a cleanup this provider of software tool to remove any debris WASTE of this program in order to activate the Windows Firewall.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Could not start the Windows Vista firewall

  Hi all

  I can't start the Windows Firewall service in anyway.
  I can't open it via Control Panel, as it is said simply: "the Windows Firewall settings cannot poster because the asscioated service is not running. You want to start the Windows Firewall service? »
  I click "Yes", then he said: 'Windows cannot start the Windows Firewall service. There is no error code indicated.
  I tried running "wf.msc" using the Microsoft Management Console. When this window appears, he says: "there was an error opening the Windows Firewall with advanced snap-in security.; The Windows Firewall with Advanced Security snap could not load. Restart the Windows Firewall service on the computer that you are managing. "Error code: 0x6D9.
  As it seems, I can not start it this way or the other.
  I pressed Ctrl + Alt + Delete and click on the Services tab, then click services on the bottom, and this opens the Services window.
  In the new Services window, I try to start the service "Windows Firewall". I get a message saying: "Windows could not start the Windows Firewall service on the Local computer.; Error 1068: the dependency service or group could start. »
  Therefore, it does not. The service is set to automatic.
  I found another process called 'Base filtering engine', which I discovered is related to the use of the Windows Firewall service. Then, that I try to start this service, and he said: "Windows has no start the engine service of filtering based on Local computer." Error 0 x 80320009: an object with this GUID or LUID already exists. »
  Still, I can't find a way to fix the problem. In addition, the service is set to automatic.
  So if someone could help me, give me ideas or tell me how to solve the problem, it would be greatly appreciated. Thanks in advance.
  P. S. sometimes, when I type things in the command prompt, I get a message saying that "the requested operation requires a rise." What it means
  ?
  EDIT:
  The base filtering engine
  IKE and AuthIPsec Keying Modules

  Internet Connection Sharing (ICS)

  IPsec policy agent

  Routing and remote access

  Windows event collector

  Windows Firewall

  All of these services don't work, with each saying "Windows did not start the * service * service on Local computer.; Error 1068: The dependency service or group could start. ", with the exception of the Base Filtering Engine service.

  EDIT:

  I believe that the motor of filter of Bae is the root cause of the problem, because when I try to start it, it says "Windows cannot start the engine service of filtering based on Local computer. Error 0 x 80320009: an object with this GUID or LUID already exists. ", so that all the other programs on this service, said depedent" Windows did not start the * service * service on Local computer. " ; Error 1068: The dependency service or group could start. ».

  EDIT:

  Hello everyone, I solved the problem. The problem is a corrupted, file called "secdrv.sys. To resolve this problem, I had to first download the file "secdrv.sys' out of my operating system CD. To do this, you must create a partition and "mount" a file on CD, on the newly created partition. The file you have to climb is and is called: "*: \sources\install.wim. Extending .wim means a "file system Windows Image" and to see what files it contains, you will need to download what we call the "Windows Automated Installation Kit". Explicit instructions on the installation procedure and where to get this program, is here: "http://www.vistax64.com/tutorials/86959-access-vista-install-dvd-files.html". Once you have the file mounted, just search the area mounted for "secdrv.sys", then copy and paste it in "C:\Windows\System32\drivers" or that where the drivers from your system. After that, restart and the BFE service and all of its dependencies should work properly. Thanks for the good help like SpiritX.

  Hello everyone, I solved the problem. The problem is a corrupted, file called "secdrv.sys. To resolve this problem, I had to first download the file "secdrv.sys' out of my operating system CD. To do this, you must create a partition and "mount" a file on CD, on the newly created partition. The file you have to climb is and is called: "*: \sources\install.wim. Extending .wim means a "file system Windows Image" and to see what files it contains, you will need to download what we call the "Windows Automated Installation Kit". Explicit instructions on the installation procedure and where to get this program, is here: "http://www.vistax64.com/tutorials/86959-access-vista-install-dvd-files.html". Once you have the file mounted, just search the area mounted for "secdrv.sys", then copy and paste it in "C:\Windows\System32\drivers" or that where the drivers from your system. After that, restart and the BFE service and all of its dependencies should work properly. Thanks for the good help like SpiritX.

• Impossible to activate the Windows Vista firewall

  Firewall
  I can't get my firewall to activate all the süden

  Hi mary_turley,

  1. don't you get an error when you try to turn it on?
  2. hell on Windows Firewall?
  3. which edition of Windows Vista you are using?

  Check the status of the Windows Firewall service.

  Follow these steps:
  a. click on start and type services.msc in the search box and press on enter.
  b. Locate the Windows Firewall service.
  c. make sure that the service is started and set to automatic.

  If you get an error during the startup of the service, then post the error here so that we can move forward more troubleshooting.

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to allow browsing the Web via the Windows Vista firewall

  I'm trying to lock the outbound firewall rules on my PC. My thought is that if there is no malicious software on my PC, I would not communicate with other computers. To this end, I really want to allow connections from web browser and to make remote desktop connections. Public profile in the Windows my PC firewall is active. In addition, all inbound and outbound connections that do not match one of the active rules are blocked. I created an outbound rule custom firewall program that allows the %ProgramFiles%\Internet Explorer\iexplore.exe program to establish connections. The rule is configured for all profiles and any Protocol (which probably should not be necessary). However, IE is still unable to connect. I'm rather confused and don't know what to do...

  Andrew

  Thank you all for all the great links :)  It turns out that the problem I had was the result of the creation of a firewall exception for the 64 bit version of Internet Explorer, rather than the 32-bit version.  When I changed the program that has been authorized by the firewall of %ProgramFiles%\Internet Explorer\iexplorer.exe \Internet.exe (x 86) % ProgramFiles %, I was once more able to connect to Internet by using IE.  Once again, thank you for all the links.  I think I understand a little better Windows Firewall now.

  Andrew

• How to configure the Windows Vista Firewall default

  How can I configure the default windows firewall

  Hello

  If you use a 3rd part firewall uninstall it

  or if you are using an internet security suite that includes a firewall, disable/turn off the firewall

  then that;

  1. Open Windows Firewall by clicking on the button start , clicking Control Panel, clicking Security and then click Windows Firewall.

  2. Click turn on or off Windows Firewall. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Click on (recommended) and then click OK

  and you should have only ONE firewall running

  more than ONE firewall running can cause blockages of the system, etc.

• Impossible to activate the Windows Vista firewall, it does not appear in the Services

  Windows xp

  I can't turn on the firewall... I followed the instructions on http://answers.microsoft.com/en-us/windows/forum/windows_vista-security/firewall-security-cant-turn-on-windows-firewall/a52f0907-2174-4ed1-9e56-c196e53e599a?page=1&tab=MoreHelp#tabs.  did not help.  I didn't see firewall listed in services to the cmd prompt, after pasting the head, I got "the specified service does not exist as an installed service.  now what?  I had installed avg, which seems to be the original problem... It is now uninstalled, tried ms mrfixit.  which doesn't work anymore.  Thank you

  I found the answer after continuing to search.  Critical words seems not to be a listed service.  Here is the link, I ran this first solution and it worked.

  ttp://support.Microsoft.com/kb/920074

  the antivirus avg, version free looks like it's made to be unistallable based on what I've seen elsewhere.

• the Windows vista firewall authorization driver is missing, the cause of the problem that the firewall cannot be activated? How to fix?

  Recently my fireall cannot be activated? I tried manually put on throughout the service, no luck. Then, I checked the firewall authorization driver is absent, it is the cause of the problem that the firewall cannot be activated? How to fix?

  Hi James,

  Thank you for your e-mail. I solved the problem using System Restore.

• Windows Vista Firewall: Uncheck basic network layout would make my computer more secure on the Public network?

  I use the Public network a lot.  I noticed that on my Windows Vista firewall, Core Networking is checked on by default.  Unchecking it would make my computer more secure on the Public network?  I already checked in my firewall settings, block all incoming connections.  Regarding security, I run MSE, like Spyware Blaster in the background.  Automatic updating and Malware Protection are on.  My other security settings are OK.  I do not understand why Core Networking is checked on by default.  This would make an open port, right?  Unchecking it would make my computer more secure?  Thank you.

  Hello

  If you uncheck Core Networking IPv4 and IPv6 will be unreliable or blocked.

  You have a router, a firewall (today, most have them) which is excellent protection
  for your network against external influences. In addition, Windows Firewall.

  Windows Vista Networking-
  http://TechNet.Microsoft.com/en-us/library/bb742618.aspx

  Better to use WPA/WPA2 security if they are available and you can hide the SSID that will help
  help others to see the network (note on some routers more hide the SSID)
  causes of connection problems and if they find out the name he is more useful).

  Wireless network general recommendations of security for individuals
  http://theillustratednetwork.MVPs.org/LAN/SoHoWirelessSecurity.html

  Introduction to wireless network security
  http://netsecurity.about.com/od/Hackertools/a/aa072004b.htm

  10 tips for Wireless Home Network Security
  http://compnetworking.about.com/od/wirelesssecurity/TP/wifisecurity.htm

  Securing your wireless network
  http://www.practicallynetworked.com/support/wireless_secure.htm

  How to secure your router Linksys Wireless - similar can be used for other routers
  http://www.pctipguys.com/index.php?option=com_content&task=view&ID=57&Itemid=36

  What are the different wireless network security methods?
  http://windowshelp.Microsoft.com/Windows/en-us/help/b385cc8a-AF25-489e-a82e-decf6df26b681033.mspx#EZB

  Hope these helps.

  Rob Brown - Microsoft MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How can I remove a redundant entry of the Windows Vista 32-bit NT loader;

  How can I remove a redundant entry of the Windows Vista 32-bit NT loader; (The entrance there is an older operating system).

  Hi poomoon,

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot
  Step 2: Enable half the services
  Step 3: Determine whether the problem returns
  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns
  Step 6: Resolve the problem
  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  After reviewing the issue, put the computer into Normal mode.
  Uninstall or update the program that is causing the problem.

  If this does not work, let us try to restore your computer to a previous state of safe mode.
  Follow the instructions below to restore your computer to a previous state.

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.
  2. If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
  3. in the System Restore dialog box, click Next.
  4. in the list of restore points, click a restore point created at least a week before the current date, and then click Next.

  Note: If you do not find a restore point that is aged for at least a week, select the first point of restoration that is available.
  5. click on finish.
  6. the computer restarts. The system files and settings are returned to the State they were when the restore point was created.

  Check whether the problem is resolved.

  I suggest that you create a restore point before you follow the instructions below.
  How to manually create a restore point?

  1 open the system by clicking the Start button, clicking Control Panel, clicking system and Maintenance, and then click System.
  2. in the left pane, click System Protection. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. click on the tab System Protection and then click on create.

  In the System Protection dialog box, type a description, and then click on create.

  You can also try to remove the entry by using bcdedit command in Vista by following the links below.
  1. click on start.
  2. type cmd and click with the right button on cmd.exe to select run as administrator.
  3. Enter the following text.

  bcdedit [{ID}] /deletevalue datatatype

  The {ID} is the GUID associated with the start-up input. If you do not specify a {ID}, the command changes the current operating system boot entry. If a boot entry is specified, the GUID associated with the start-up input must be enclosed in braces {}. To view the GUIDs for all active startup entries, use the bcdedit/enum command.

  For more information, please see the links below.
  http://TechNet.Microsoft.com/en-us/library/cc709667 (WS.10) .aspx
  http://msdn.Microsoft.com/en-us/library/aa906211.aspx

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• Can I use the Windows Vista I had with my Toshiba laptop on virtual machine?

  Hey all

  I have changed Microsoft for Macintosh, but installed on a virtual machine (oracle vm virtual machine) my Windows Vista I got with my Toshiba Satellite A350D Notebook previous. I installed Vista with the recovery disk. Now he asks me the Windows Vista product key. The sticker on the back of my laptop is more readable. I run the Belarc Advisor to get the product key in this way. But right now, he said: "it's the product key installed at the factory by the manufacturer rather than yours. You can change this to your product key here for Windows http://go.microsoft.com/fwlink/?LinkId=45668"

  My question: am I not allowed to use windows vista legally, I had with my computer toshiba laptop on other devices? I won't use the Thoshiba laptop. Do I have to delete the record from the Thoshiba laptop? Where can I get a new product key?

  Maybe someone can help me here. Thank you in advance for taking your time to read this.

  Betty

  Recovery disk or recovery image is designed for some cell phone only and is not a kind of universal image that can be used on other devices. It comes with the laptop.

  You can use the Microsoft Windows disk with valid license on each device. Recovery image is not only BONES. This is the package that contains the drivers and tools specific to Toshiba and utilities.
  As you also know recovery image when you install it on your laptop must be turned on not so the license code downstairs just proves you have purchased a valid license with your laptop.
  > Should I remove the record of the Toshiba laptop?
  Not why do this?
  > Where can I get a new product key?
  You cannot get it because you need when you use the recovery image on your Satellite A300D. I think even you will hear of Toshiba.

• Where can you buy CD to the Windows Vista Home page?

  Whear you can buy CDs in the Windows Vista Home page

  I have win 7 allredy but I want vista

  Your choice of course, although I think you make a serious mistake. You can get it on Amazon.com

• Can't unzip the files using the Windows Vista option extract all

  I tried to unzip the files, I have downloaded from the Web site by using the context menu "extract all... "on the file.  I have a Board error saying that the compressed (zipped) folder is empty.  If I try a double click on the file, I get the message that the zip file is not valid.  This has happened to every zip file I tried to unpack so far.  The only files I can unpack so far are those I zipped myself using the context menu "send to folder of Compssed of-->" of Windows Vista.  Any suggestions?

  Hi Eddie Hersh,.

  Thanks for choosing the Windows Vista Forum.

  1 how long have you had this problem?

  2. If it works well before?

  Make sure that the download of the file is not corrupted.

  You can perform the steps in the link below and check if it works.

  Restore and return the file Association in Windows Vista if Original

  1. click on start, and then type regedit in start search and press ENTER.

  2. navigate to the following registry branch:

  NtVersion ntVersion\Explorer\FileExts\ [ext]

  Replace the [exe] with the real extension of the file you want to restore the file type association to return to the default Windows Vista original. If you unsure, simply browse through all the Sub-touche under FileExts.

  3. delete the subkey named UserChoice.

  4. exit the registry editor.

  WARNING:

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk...

  Compress and uncompress files (zip files) - http://windowshelp.microsoft.com/Windows/en-US/Help/7050d809-c761-43d4-aae7-587550cd341a1033.mspx

  Kind regards

  Marnie.

• I lost my recovery for Windows Vista disk. How can I restore the computer to its original factory State?

  I lost my recovery for windows Vista disk. How can I restore the computer to its original factory State? I can't find how to create recovery discs, I did not have this option in the Recovery Manager

  Hello

  Here are the different ways to reinstall vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  Save all data, because it will be lost, do the above

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• I want to do "System Restore" in Windows Vista. But I can't change the restore point

  I want to do "System Restore" in Windows Vista. But I can't change the restore point. How to configure manual restore point? Can I enter a date I want to restore? I tried, but it did not work.

  Original title: in Windows vista system restore

  Hello

  Either the system restore point is already created for an earlier date, or is not available.

  You cannot create a restore today Point to return to yesterday.

  You can create a restore today Point to use in the future.

  Here's how to use the Vista system restore:

  http://bertk.MVPs.org/html/restoresysv.html

  See you soon.