Unique number with the manipulation of XML on the 8520 with OS 4.6

Similar Questions

• Generation of a unique number on the columns.

  Hello
  
  Please check this query,
  
  < pre >
  
  SELECT DISTINCT A.LKP_ID AS ID
  D.PART_CNDTN_CD as a CONDITION
  D.PART_DISPOSTN_CD AS PROVISION
  C.LKP_NM AS DESCRIPTION
  OF FWOWNER. CLM_LKP_VALUE HAS
  FWOWNER. CLM_LKP_USAGE B
  FWOWNER. C CLM_LKP_VALUE_LANG
  IWOWNER. WC_CLM_SRVC_PART D
  WHERE B.LKP_USED_AS IN ('RR_CAUSAL_PART_CNDTN_CODE', 'rr_parts_disposition')
  AND A.LKP_REF BETWEEN B.LKP_REF AND B.LKP_REF + '.' 99999
  and A.LKP_ID = C.LKP_ID
  AND C.LANG_CD = 'ENG_USA. '
  AND A.LKP_LVL = 3
  and A.LKP_VALUE = BOX
  WHEN B.LKP_USED_AS IN ('RR_CAUSAL_PART_CNDTN_CODE')
  THEN D.PART_CNDTN_CD
  WHEN B.LKP_USED_AS IN ('rr_parts_disposition')
  THEN D.PART_DISPOSTN_CD
  END
  
  < / pre >
  
  
  top query let me out like,
  
  < pre >
  AVAILABLE FOR THE ID CODE DESCRIPTION
  ----- ------- ---------- ---------------------------------
  CP07 25774 REVAMPED bad calibration
  25789 CP22 leak (null)
  25795 CP28 scars / covered
  25796 CP29 (null) Warped/distorted/curly
  25768 CP01 PROCESSED Bent/pleated/Fold/bent/blister
  CP10 25777 chipped
  Contamination CP12 25779
  25786 CP19 grooved/crosses (null)
  25793 pitted CP26 (null)
  25768 CP01 (null) Bent/Creased/Fold/twisted/Crinkled
  25777 chipped CP10 (null)
  CP11 25778 Circuit (null) Bad
  25783 dented CP16 (null)
  25790 obsolete CP23 / supplant (null)
  25797 CP30 (null) worn too
  25798 CP31 (null) bad part
  * 25799 CP32 (null) other *.
  * Other CP32 25799 *.
  28225 CP07 REVIEW REVIEW
  25771 CP04 Broken/fractured (null)
  25779 CP12 Contamination (null)
  25780 CP13 corroded/eroded (null)
  25781 CP14 Cracked (null)
  25785 CP18 Galled/frettees (null)
  25788 CP21 (null) failure to point
  25795 CP28 Scarred/Spalled (null)
  CP30 25797 door too
  28225 CP01 REVIEW REVIEW
  
  28 response (s) selected [extract metadata: 0/ms] [extract data: 0/ms]
  
  
  < / pre >
  
  Please see the part "BOLD", I get two duplicates with a vertical drop of NULL and empty space I want to generate a unique number on the CONDITION column and available how to do this.
  
  
  (Please check my previous thread of reference
  MERGE TWO COLUMNS?
  )

  This is not Oracle...

  In any case:

  SELECT  DISTINCT A.LKP_ID          AS ID
  ,       D.PART_CNDTN_CD          as CONDITION
  ,       CASE WHEN LENGTH(D.PART_DISPOSTN_CD)=0 or D.PART_DISPOSTN_CD IS NULL THEN null ELSE D.PART_DISPOSTN_CD END  AS DISPOSITION
  ,       C.LKP_NM AS DESCRIPTION
  FROM     FWOWNER.CLM_LKP_VALUE          A
  ,     FWOWNER.CLM_LKP_USAGE          B
  ,     FWOWNER.CLM_LKP_VALUE_LANG      C
  ,     IWOWNER.WC_CLM_SRVC_PART     D
  WHERE     B.LKP_USED_AS          IN ( 'RR_CAUSAL_PART_CNDTN_CODE', 'rr_parts_disposition')
  AND     A.LKP_REF          BETWEEN     B.LKP_REF     AND     B.LKP_REF + '.99999'     -- No quotes
  and     A.LKP_ID          = C.LKP_ID
  AND     C.LANG_CD          = 'ENG_USA'
  AND     A.LKP_LVL          = 3
  and      A.LKP_VALUE          = CASE
                           WHEN  B.LKP_USED_AS     IN ( 'RR_CAUSAL_PART_CNDTN_CODE')
                           THEN  D.PART_CNDTN_CD
                           WHEN  B.LKP_USED_AS     IN ('rr_parts_disposition')
                           THEN  D.PART_DISPOSTN_CD
                        END
  

  Max
  [My Italian blog Oracle | http://oracleitalia.wordpress.com/2010/02/07/aggiornare-una-tabella-con-listruzione-merge/]

• The charge would be created with the unique package with date id

  Hi all
  
  Thanks in advance,
  
  IAM new to ODI, in my process I dnt know below two constaraints how to do, please help me in this regard...
  
  1. the load would be created with the id of a single lot with the date and
  stamp under the unique number (when the load data from source to target).
  2. HIGHLAND field would have the line number incremented from
  .001 when records are inserted in the table

  30021986 wrote:
  Hello

  Thanks for the reply, my requirement is,
  1.i have field JELN in the target table, in that line number is incremented from de.001 in the table. (Field JELN would have the incremented number line from de.001 when the rows are inserted in the table)

  -> for what I had done using sequenceing odi_sequence craeating, but it will give higher error.
  and the second condition is

  Never use ODI sequence unless you do business with a technology that has no native sequence is
  (eg files). Most of the RDBMS has their own sequence, and you use these alone.
  For oracle, you must use . NEXTVAL in the field mapping. Be sure to run on the target.

  2. when iam loading the data from the source to target a unique batch number must be generated with the date and time stamp (the load would be created with the unique package with date id and + *)
  timestamp in the unique number +) *.

  You can use SYSTIMESTAMP in this area and do not forget to run on the target.

• How to build a unique identifier of the XML?

  I have a fairly simple XML structure as in the example below. I'm storing XML data in XMLTYPE table without changes and the construction of a set of views for XML SQL data in addition to this access. It is very basic and indicated for example in Breaking Up several levels of XML data: http://download.oracle.com/docs/cd/E11882_01/appdev.112/e23094/xdb03usg.htm#autoId58
  
  The problem is that the XML data is missing an identifier for the order items that could be used as a primary key when document splitting audit (items) relational perspective.
  
  Currently I intend to construct such an identifier by combining a high level (which is unique) identifier to the ordinal position of the elements of order. Unfortunately I do not know how to do (see below). My second question is if it's a good idea at all or if something's substitute.
  
  I'm under Oracle 11.2.0.1.0.
  

  create or replace view orders_view as
  with xmldata as (select xmltype('<batch id="batch1">
  <order>
    <orderer>Joe</orderer>
    <items>
      <item>Standard widget</item>
    </items>
  </order>
  <order>
    <orderer>Jack</orderer>
    <items>
      <item>Regular widget</item>
      <item>Cooling widget</item>
    </items>
  </order>
  <order>
    <orderer>John</orderer>
    <items>
      <item>Super+ widget</item>
      <item>Super+ widget</item>
    </items>
  </order>
  </batch>') object_value from dual)
  select x1.batchid,
         (select x1.batchid || '-' || x2.orderid from dual) as orderid,
         x2.orderer_name,
         x2.nbr_of_items
  from xmldata,
  xmltable('$doc/batch' passing xmldata.object_value as "doc"
           columns
           batchid varchar2(10) path '@id',
           orderlist xmltype path 'order') x1,
  xmltable('/order' passing x1.orderlist
           columns
           orderid varchar2(20) path '"?"', /* What to put here to get expected results ? */
           orderer_name varchar2(10) path 'orderer',
           nbr_of_items number path 'count(items/item)') x2;
  
  column batchid format a10
  column orderid format a10
  column orderer_name format a10
  
  select * from orders_view;

  Expected results:
  

  BATCHID    ORDERID    ORDERER_NA NBR_OF_ITEMS
  ---------- ---------- ---------- ------------
  batch1        batch1-1   Joe                   1
  batch1        batch1-2   Jack                  2
  batch1        batch1-3   John                  2

  Where ORDERID is built like BATCHID + '-' + the position of the < order > element in the batch.

  Hello

  The clause for ORDINALITE does exactly what you want:
  http://download.Oracle.com/docs/CD/E11882_01/server.112/e17118/functions253.htm#SQLRF06232

  select x1.batchid,
         x1.batchid || '-' || x2.orderid as orderid,
         x2.orderer_name,
         x2.nbr_of_items
  from xmldata,
  xmltable('$doc/batch' passing xmldata.object_value as "doc"
           columns
           batchid varchar2(10) path '@id',
           orderlist xmltype path 'order') x1,
  xmltable('/order' passing x1.orderlist
           columns
           orderid for ordinality,
           orderer_name varchar2(10) path 'orderer',
           nbr_of_items number path 'count(items/item)') x2
  ;
  

• "Is:java.sql.SQLException error: ORA-01555: snapshot too old: rollback segment number with the name ' ' too small '.

  Hello

  We conduct apply CM which is a failure with the Error: "declared:java.sql.SQLException: ORA-01555: snapshot too old: rollback segment number with the name '' too small'."

  Its in our unique the production instance. I checked on the return parameter. Here are the details.

  SQL > show Cancel parameter

  VALUE OF TYPE NAME

  ------------------------------------ ----------- ------------------------------

  _in_memory_undo Boolean TRUE

  _undo_debug_usage integer 2

  UNDO_MANAGEMENT string AUTO

  UNDO_RETENTION integer 40000

  undo_tablespace string APPS_UNDOTS1

  SQL > select max (maxquerylen) of v$ undostat;

  MAX (MAXQUERYLEN)

  ----------------

  637116

  Please suggest what needs to be done to go further.

  
  

  Kind regards

  Prabhat.
  

  Post edited by: 942633

  Hello

  ORA-02067: the rollback transaction or registration required

  As mentioned, you will need to look at the design of the code:

  Error: ORA 2067
  Text: rollback transaction or registration required
  -------------------------------------------------------------------------------
  Cause: A failure (typically a trigger or a stored procedure with several updates remotely) has occurred, such as the execution of all or nothing from a previous call to Oracle cannot be guaranteed.
  Action: return to a previous point of backup or restore the transaction and resubmit.

  ------

  ORA-01555 caused by the following SQL statement (SQL ID: 5y0q4u8r2hdy9, query term s = 637608, SCN: 0x0bcc.4ed82762):

  ------

  ACTUAL SIZE [MB] UNDO UNDO RETENTION [s] NECESSARY UNDO SIZE [MB]

  ------------------------                   ------------------------------------------------------------------------- ------------------------

  304849 40000 267232.292

  To better help you, please let us know:

  -What is the function of this program.

  -Did you recently parameter changes until you have this error.

  Please ensure that the validation controls are implemented correctly, the DBA team and development will work hand in hand.

  Thank you &

  Best regards

• is there any function in the osb to generate a unique number in proxy

  is there any function in the osb to generate a unique number in proxy

  FN - bea: uuid()

  The function fn - bea: uuid() returns a universal unique identifier. The function has the following signature:

  FN - bea: uuid() as XS: String

  You can use this function in the pipeline of proxy to generate a unique identifier. You can insert the unique identifier that is generated in an XML document in the form of element. You are unable to generate a unique identifier to the system variable. You can use this to edit a message payload.

  For example, suppose you want to generate a unique identifier to add it to a message for follow-up purposes. You can use this function to generate a unique identifier. The function returns a string that you can add it to the SOAP header.

• VISA devices with the same serial number and the vendor ID does not work (0xBFFF003A)

  Hi all

  I need to acquire the data of two meters of power YOKOGAWA with VISA driver (USB connection).

  They work very well if used alone, but they do not work when are used toghether. In particular, when I plug in and turn on the two of them, NOR MAX shows me the following error message:

  0XBFFF003A (VI_ERROR_INV_SETUP)

  viFindRsrc return 0xBFFF003A (cannot start the operation because the installer is not valid (because of attributes defined in an inconsistent state).)

  Please make sure that VISA is properly installed on this system.

  Possible causes of this error:
  1. more than one passport may be to attempt to claim the same resource.  You can try to disable passport to understand which Passport is the cause of the error.
  2 you have connected multiple no configured plug-and-play devices that have the same name of the resource. For example, the vendor ID and the serial number may be the same.

  In fact, according to MAX, both power meters have the same serial number and the same vendor ID; so, this seems to be the reason why they do not work together.

  Can someone help me?

  Thank you all

  
  

• Generating unique random number with a Boolean signal on an RT target

  Hello, this is my first time asking your question. I apologize if I post this question in the wrong Council.

  [What I'm trying to do]

  I am stable heating and cooling in an experimental space that I (with cRio9024).

  And I'm putting a different experimental condition in space based on the function 'random number '.

  'Different experimental conditions' sense different combinations of Tind, Twat_s and mdot (refer to the attached VI).

  For example, if I get the Boolean TRUE signal.

  I should have a set of [Tind, Twat_s, mdot] = [21,14,0.05], and IS this set of numbers until this Boolean signal goes to FALSE.

  And when the signal passes to the TRUE once again.

  I should have a different set of [Tind, Twat_s, mdot] = [24,16,0.15] for example.

  [I]

  Problem I am with my code is that,

  When the VI is running, the random number remains the same as the Boolean signal is set to TRUE.

  From what I tried so far for the last couple days, using 'the event structure' was the message more concerned that I found,

  However, LabView help tells me that "structure of the event" on the objectives of the RT do not support the events associated with the user interface such as the façade of VI or controls panels.

  I would therefore ask a quick help, since my knowledge of LabView is exhausted at this point.

  

  This is so the part where I want to generate random numbers, WHEN this structure case is TRUE.

  convert whole numbers, random numbers

  Use them as a table index,

  while I can choose conditions from radom to the given set of conditions.

  Once more, I want to do is,

  generate a SINGLE random number series when the structure above is TRUE.

  Hope I have developed quite clear.

  I'm appreciated for any kind of advice.

  Thank you!

  You just need to store the Boolean from the previous run. Then the logic would be (I'll call her Boolean previous B_prevand current boolean B):

  If B AND B_prev > don't generate new values

  otherwise if B > generate new values

  Edit: to store your Boolean value, you can use a feedback node, or a loop with N = 1 and a registry change.

• Can you please provide me with the part number for the screen for model #: NX. SHKAA.001?

  Can you please provide me with the part number for the screen for model #: NX. SHKAA.001 (AO1 - 131 M-C1T4)?  The first ten digits of the serial number are NXSHKAA005.

  Matt or gloss is what it looks like. Some like not brilliant but because most are a reflection. I would say that they would work as long as the resolution of the size and the backlight are the same.

• When you use Excel or my Peachtree Accounting program, entered digital as "$152(32 in the accounting package or the same number with a square symbol as the decimal point in Excel.)". No idea what I should check first?

  When you use Excel or my Peachtree Accounting program, entered digital as "$152(32 in the accounting package or the same number with a square symbol as the decimal point in Excel.)".  No idea what I should check first?

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Office Excel and would be better suited to the office community. Please visit the link below to find a community that will support what ask you

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?d=1

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• A torn my sticker with the serial number. How to find the number of the whole installation?

  Best regards, tore my sticker with the serial number. I don't see the numbers. How to find the number of the whole installation?

  Original title: windows 7 sn

  Option 1:

  If the COA sticker is damaged, you must use the recovery partition to reinstall Windows 7, it will be exempt from the need to use the product key to activate your installation of Windows 7.

  Option 2:

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling. This will exempt the need to also use the product key.

  Option 3:

  If neither options 1 or 2 is possible, then you will need to invest in a new license of full version of detail.

• How to make a complete inventory of ASD (including the serial number) with applications of DMM

  I need to get all DMP serail number installed at Customer Site.

  How do with applications of DMM?

  Hi Thierry,.

  I fear that the serial number of the DMP is not followed in the software, it is not possible to remotely check. Your only option will physically look at the sticker on each DMP

  Concerning

  Daniel

• Contacts of numbering with number as the name blackBerry Smartphones

  OK, first post and here's what I got.

  I have contacts to many places retail with a number of store.

  example: (in coordinates) name: 1234, last name: Mountainview store.

  so I go and click on the Send button to pull up the phone and dial "1234" and it is says "no contacts" and waiting for me finish typing in this 'new' number and hit send.

  but, if I have everything start from the home screen and press the Send button to pull up the phone and then press the menu button, then click on "call for contacts" then I can compose "1234" and he pulls up the contact for the Mountianview store, so I press the button send and he composed this contact.

  so I need to know if there is a better way to enter the store info in contacts or whatever it is I do, I can type the store number into the phone to have it go back the contact without going to ' menu > call each time from the contacts that I give the floor. I don't want to use the name of the city (call me lazy, it's ok.)

  The problem is that the device assumes that if you enter the numbers in the phone app you want to dial a number to hone.

  I think that the only work around for just go first the address book and then search for the store number and dial from there

  If you Dial on disabled home screen, you can simply type the a button to go to the address book then down using your store number since there with.  You are still using the contacts function call but skip the first step of phone application.

• Recently switched from PC to Mac. I have the CD for the CS6 Adobe Creative Suite for Mac and PC. How can I get the serial number of the CD Mac OS with no disk drive?

  Recently, I switched from PC to Mac. On my PC, I got the Adobe Creative Suite Design & Web Premium (academic edition) CS6. I bought the product through my school and have two installation CD, for Windows and Mac.

  I try now to download this product on my new Macbook, but do not have a hard drive. When I check my saved items, it says that I have the Creative Suite CS6, but under the platform, he said "Winner" and serial number is for Windows product. Of course, this won't work for my Mac OS.

  So my question is, how do I get the serial number of the installation CD Mac OS with no disk drive? I guess that the numbers are different because when I put the Windows product number in the install window on my Mac, it does not work.

  So my question is, how do I get the serial number of the installation CD Mac OS with no disk drive?

  You use this procedure to share your serial number CS6 win to Mac CS6.

  Exchange a product Adobe of a different version of the language or platform

  Download the Installer application download Adobe Creative Suite 6

• Need help to reactivate Lightroom 5 with my old serial number and the number TAN.  I got a license for Lightroom 5 when I bought my Leica delux 4 in 2012.

  I got a license for Lightroom 5 when I bought my Leica delux 4 in 2012. It worked great, but after that I put an old hard drive on my PC (for 30 minutes - then I removed again) to get some information of this former, Lightroom now license application or try it for 30 days.

  I have not installed Lightroom on a new hard drive. He is always on the same hard disk. How can I now have my Lightroom to run again using my serial number and TAN? Need help to reactivate my old serial number and the number TAN.

  I use win 7.

  Duplicate thread: need help to reactivate Lightroom 5 with my old serial number and the number TAN.  I got a license for Lightroom 5 when I bought my Leica delux 4 in 2012.