Unity and length Variable Extentions/Dial Plan

I have an Avaya switch that runs the numbers 4 and 5 extensions and I want to connect to a new unit 4.x for voicemail. Any problem with the extensions of variable length running in unity?

Also I finally transitioning all users Avaya to a 5 digit numbering plan. All the problems in the future when chaning a 5 4-digit mailbox?

Also long extensions are unique, you can have lengths without problem - 3, 4, 5 and 10 - go wild.

No problem change them after the fact. The only restrictions are minimum 3-digit (I forgot the maximum off hand - it's like 30 digits), and they must be unique in the field of composition - that's all.

Tags: Cisco Support

Similar Questions

definition of variables in packages and using the same variables in charge Plans as a case statement in Odi

Hello
I am trying to use a global variable 'Global.test' in my ODI "pkg_test" package and step declaration type as a variable that is defined with the value 1 when my package evaluates the condition successfully run and with 0 if the fails.now condition I will carry out the same "pkg_test" package in my load "LP_TEST" and using the variable 'Global.test' Plan as a case statement in terms of load "LP_TEST".
It's workload Odi is unable to understand the value of the variable 'Global.test', which is defined in my pkg 'pkg_test' and my case statement is put down in my care Plan.
Thank you

Hi Santosh Pradhan,

What kind of story do you have in your variable?

If you have not selected any antecedent, the scope of the variable is limited to the session. As the execution of the package is a session in its own (independent of the workload performance), the value of the variable is not accessible after his execution.

You can also try assigning / updating of the value of the variable directly from your plan, instead of in the package:

It will be useful.

Best regards

JeromeFr

C60 dial plan

Hi all

currently I am deployment with codec 60 vcs in our customer.

they have endpoint existing videoconferencing (polycom) in the other site.

Topologi is like this:

Codec - point of video endpoints (register) - VCS-(WAN)-

video endpoints in the other site may not register for VCS, usually connects per IP.

My question is, if I register codec 60 for VCS (using H.323 or SIP), how can one codec can still dial the other end (by IP) is not to sign up for VCS?

and also, the other endpoint can call the 60 codec using intellectual property?

I know that the codec can call a point to use the intellectual property, but if the codec is registered in VCS, I always confuse in the configuration of the dial plan.

Is my question is clear, or need some explanations?

y at - it an idea?

Thank you

Kind regards

Anju Josua

It is important that there is no nat or video ports closed by a firewall between the involved Codec, VCS - C and the Polycom video end point.

In general, the VCS - C is set to place calls ip address unknown through the VCS - E (see the deployment of vcs - c/e guide).

VCS need to know the internal IP is directly accessible.

Happening if endpoint registers with the SCV - C (is there a reason why you do not simply save

the end of polycom in your VCS - C?)

The other option is to add a void area local based ip where you add your internal networks (or just ip endpoints)

so the VCS can directly call endpoint.

Please remember useful frequency responses and identify useful or correct answers.

Histograms and bind variables

Hi guys,.
When a SQL using bind variables histograms afftect the excution plan how?

For example
There is a table 'TEST' a column a number, varchar2 (100) b, c. tank (100).
100000 rows in this table and the 90000 column rows a value is 1, the other value is 2-10 by 100rows.

Now this column a histogram and a btree index only has on a;

Here is sample code
number of a_v var;
exec: a_v: = 10;

Select * from test where a =: a_v.

The plan of the excution is full table scan.

If I don't use of variable binding. It will scan the index.

I remember that a document mentioned that "do not use histograms using bind variables.

But why?

I disabled same bind variable peeking?

Thank you guys. Looking forward to your response.

Longfei Wei says:
Thanks Centinul this article is useful for me, but it is not explained why histograms do not work well with bind variables.

Thanks again.

Longfei,

Jonathan Lewis article is very good - another look at this article. Histograms peuvent work with bind variable, but the end result is usually not the desired result. Bind variables are used to reduce the number of different execution plans. The histograms are used to find what is supposed to be the best execution plan for the predicates provided and in the case of the bind variables, those are peeked from the bind variable values. Thus, if you have a histogram on a column and for hard analysis of a SQL statement and the most common value in this column is presented in the binding variable - this execution plan is considered by the optimizer to be the 'best' execution plan for the bind variable values provided. Suppose now that instead the less popular value in the column is specified - the optimizer peut produce a very different for the same SQL statement execution plan, which is optimized for the less popular value (this can be a scan of the index systematic range, rather than a full table scan). Now suppose the execution plan may not change when change of variable values bind - if you have a single popular value and many unpopular values, if the analysis lasts is performed with the popular single value, you might find that all subsequent runs of this SQL statement to perform full table scans, even if only a few rows in the table are selected.

Here's a quick test on the Oracle 11.2.0.2 database to demonstrate:

CREATE TABLE T1 (
  C1 NUMBER,
  C2 NUMBER,
  C3 VARCHAR2(300));

INSERT INTO
  T1
SELECT
  *
FROM
  (SELECT
    ROWNUM C1,
    DECODE(MOD(ROWNUM,100),99,99,1) C2,
    RPAD('A',300,'A') C3
  FROM
    DUAL
  CONNECT BY
    LEVEL <= 1000000)
ORDER BY
  C2;

CREATE INDEX IND_T1_C2 ON T1(C2);

EXEC DBMS_STATS.GATHER_TABLE_STATS(OWNNAME=>USER,TABNAME=>'T1',CASCADE=>TRUE,METHOD_OPT=>'FOR ALL INDEXED COLUMNS SIZE 254')

The foregoing has created a table with 1 000 000 lines where 99% of the lines have a value of 1 in C2 and 1% have a value of 99, and lines are inserted with a perfect setting in cluster factor because of the ORDER BY clause. A histogram has been created on the indexed column.

Let's try a test, we'll search a unpopular value 2 for the connection variable:

VARIABLE N1 NUMBER
EXEC :N1:=2

SELECT /*+ GATHER_PLAN_STATISTICS */
  C1,
  C2
FROM
  T1
WHERE
  C2 = :N1;

no rows selected

SELECT * FROM TABLE(DBMS_XPLAN.DISPLAY_CURSOR(NULL,NULL,'ALLSTATS LAST'));

SQL_ID  c7su63uw7nch6, child number 0
-------------------------------------
SELECT /*+ GATHER_PLAN_STATISTICS */   C1,   C2 FROM   T1 WHERE   C2 =
:N1

Plan hash value: 236868917

------------------------------------------------------------------------------------------------------------
| Id  | Operation                   | Name      | Starts | E-Rows | A-Rows |   A-Time   | Buffers | Reads  |
------------------------------------------------------------------------------------------------------------
|   0 | SELECT STATEMENT            |           |      1 |        |      0 |00:00:00.01 |       3 |      1 |
|   1 |  TABLE ACCESS BY INDEX ROWID| T1        |      1 |   5957 |      0 |00:00:00.01 |       3 |      1 |
|*  2 |   INDEX RANGE SCAN          | IND_T1_C2 |      1 |   5957 |      0 |00:00:00.01 |       3 |      1 |
------------------------------------------------------------------------------------------------------------

Predicate Information (identified by operation id):
---------------------------------------------------
   2 - access("C2"=:N1)

Thus, there is no selected row, the optimizer predicts that 5 957 lines would be returned and a path to the index has been selected. Path of this index would also be appropriate for the value of the bind variable 1? We will continue the trial, this time by choosing the 99 for the binding variable value:

EXEC :N1:=99
SET TIMING ON

SELECT /*+ GATHER_PLAN_STATISTICS */
  C1,
  C2
FROM
  T1
WHERE
  C2 = :N1;

...
10000 rows selected.

Elapsed: 00:00:05.35

SELECT * FROM TABLE(DBMS_XPLAN.DISPLAY_CURSOR(NULL,NULL,'ALLSTATS LAST'));

SQL_ID  c7su63uw7nch6, child number 0
-------------------------------------
SELECT /*+ GATHER_PLAN_STATISTICS */   C1,   C2 FROM   T1 WHERE   C2 =
:N1

Plan hash value: 236868917

---------------------------------------------------------------------------------------------------
| Id  | Operation                   | Name      | Starts | E-Rows | A-Rows |   A-Time   | Buffers |
---------------------------------------------------------------------------------------------------
|   0 | SELECT STATEMENT            |           |      1 |        |  10000 |00:00:00.02 |    1783 |
|   1 |  TABLE ACCESS BY INDEX ROWID| T1        |      1 |   5957 |  10000 |00:00:00.02 |    1783 |
|*  2 |   INDEX RANGE SCAN          | IND_T1_C2 |      1 |   5957 |  10000 |00:00:00.01 |     690 |
---------------------------------------------------------------------------------------------------

Predicate Information (identified by operation id):
---------------------------------------------------
   2 - access("C2"=:N1)

Once more, the optimizer predicts 5 957 lines could be found even if 10,000 rows have been retrieved. Note also that the number of children is always 0. We will continue the trial, this time with the bind variable value of 1:

EXEC :N1:=1

SET AUTOTRACE TRACEONLY STATISTICS

SELECT /*+ GATHER_PLAN_STATISTICS */
  C1,
  C2
FROM
  T1
WHERE
  C2 = :N1;

990000 rows selected.

Elapsed: 00:00:18.78

Statistics
---------------------------------------------------
          1  recursive calls
          1  db block gets
     108571  consistent gets
          0  physical reads
         96  redo size
   21958348  bytes sent via SQL*Net to client
     726508  bytes received via SQL*Net from client
      66001  SQL*Net roundtrips to/from client
          0  sorts (memory)
          0  sorts (disk)
     990000  rows processed

SET AUTOTRACE OFF

Because I used AUTOTRACE to prevent 990 000 lines scrolling on the screen, I have to specify the SQL_ID and CHILD_NUMBER to retrieve the execution plan:


SELECT * FROM TABLE(DBMS_XPLAN.DISPLAY_CURSOR('c7su63uw7nch6',0,'ALLSTATS LAST'));

SQL_ID  c7su63uw7nch6, child number 0
-------------------------------------
SELECT /*+ GATHER_PLAN_STATISTICS */   C1,   C2 FROM   T1 WHERE   C2 =
:N1

Plan hash value: 236868917

---------------------------------------------------------------------------------------------------
| Id  | Operation                   | Name      | Starts | E-Rows | A-Rows |   A-Time   | Buffers |
---------------------------------------------------------------------------------------------------
|   0 | SELECT STATEMENT            |           |      1 |        |  10000 |00:00:00.02 |    1783 |
|   1 |  TABLE ACCESS BY INDEX ROWID| T1        |      1 |   5957 |  10000 |00:00:00.02 |    1783 |
|*  2 |   INDEX RANGE SCAN          | IND_T1_C2 |      1 |   5957 |  10000 |00:00:00.01 |     690 |
---------------------------------------------------------------------------------------------------

Predicate Information (identified by operation id):
---------------------------------------------------
   2 - access("C2"=:N1)

Who can be the execution plan that was used because it shows that 10,000 rows have been retrieved. We will try again, this time with CHILD_NUMBER 1:


SELECT * FROM TABLE(DBMS_XPLAN.DISPLAY_CURSOR('c7su63uw7nch6',1,'ALLSTATS LAST'));

SQL_ID  c7su63uw7nch6, child number 1
-------------------------------------
SELECT /*+ GATHER_PLAN_STATISTICS */   C1,   C2 FROM   T1 WHERE   C2 =
:N1

Plan hash value: 3617692013

------------------------------------------------------------------------------------
| Id  | Operation         | Name | Starts | E-Rows | A-Rows |   A-Time   | Buffers |
------------------------------------------------------------------------------------
|   0 | SELECT STATEMENT  |      |      1 |        |    990K|00:00:00.83 |     108K|
|*  1 |  TABLE ACCESS FULL| T1   |      1 |    988K|    990K|00:00:00.83 |     108K|
------------------------------------------------------------------------------------

Predicate Information (identified by operation id):
---------------------------------------------------
   1 - filter("C2"=:N1)

The foregoing shows the actual plan that has been used. Sharing the adjustment slider (first available with Oracle Database 11.1) is reached and forced to re-evaluate the execution plan to avoid a very slow recovery through the index - which won't happen before 11.1 database Oracle.

Just to illustrate:

ALTER SESSION SET OPTIMIZER_FEATURES_ENABLE='10.2.0.4';

VARIABLE N1 NUMBER
EXEC :N1:=2

SELECT /*+ GATHER_PLAN_STATISTICS */
  C1,
  C2
FROM
  T1
WHERE
  C2 = :N1;

no rows selected

Elapsed: 00:00:00.00

SELECT * FROM TABLE(DBMS_XPLAN.DISPLAY_CURSOR(NULL,NULL,'ALLSTATS LAST'));

SQL_ID  c7su63uw7nch6, child number 2
-------------------------------------
SELECT /*+ GATHER_PLAN_STATISTICS */   C1,   C2 FROM   T1 WHERE   C2 =
:N1

Plan hash value: 236868917

---------------------------------------------------------------------------------------------------
| Id  | Operation                   | Name      | Starts | E-Rows | A-Rows |   A-Time   | Buffers |
---------------------------------------------------------------------------------------------------
|   0 | SELECT STATEMENT            |           |      1 |        |      0 |00:00:00.01 |       3 |
|   1 |  TABLE ACCESS BY INDEX ROWID| T1        |      1 |   5957 |      0 |00:00:00.01 |       3 |
|*  2 |   INDEX RANGE SCAN          | IND_T1_C2 |      1 |   5957 |      0 |00:00:00.01 |       3 |
---------------------------------------------------------------------------------------------------

Predicate Information (identified by operation id):
---------------------------------------------------
   2 - access("C2"=:N1)

Note in the above that the CHILD_NUMBER is now 2.

Continues:

EXEC :N1:=99
SET TIMING ON

SELECT /*+ GATHER_PLAN_STATISTICS */
  C1,
  C2
FROM
  T1
WHERE
  C2 = :N1;

10000 rows selected.

Elapsed: 00:00:05.31

SELECT * FROM TABLE(DBMS_XPLAN.DISPLAY_CURSOR(NULL,NULL,'ALLSTATS LAST'));

SQL_ID  c7su63uw7nch6, child number 2
-------------------------------------
SELECT /*+ GATHER_PLAN_STATISTICS */   C1,   C2 FROM   T1 WHERE   C2 =
:N1

Plan hash value: 236868917

---------------------------------------------------------------------------------------------------
| Id  | Operation                   | Name      | Starts | E-Rows | A-Rows |   A-Time   | Buffers |
---------------------------------------------------------------------------------------------------
|   0 | SELECT STATEMENT            |           |      1 |        |  10000 |00:00:00.02 |    1783 |
|   1 |  TABLE ACCESS BY INDEX ROWID| T1        |      1 |   5957 |  10000 |00:00:00.02 |    1783 |
|*  2 |   INDEX RANGE SCAN          | IND_T1_C2 |      1 |   5957 |  10000 |00:00:00.01 |     690 |
---------------------------------------------------------------------------------------------------

Predicate Information (identified by operation id):
---------------------------------------------------
   2 - access("C2"=:N1)

The CHILD_NUMBER is always 2.

Continues:

EXEC :N1:=1

SET AUTOTRACE TRACEONLY STATISTICS

SELECT /*+ GATHER_PLAN_STATISTICS */
  C1,
  C2
FROM
  T1
WHERE
  C2 = :N1;

990000 rows selected.

Elapsed: 00:00:16.91

Statistics
---------------------------------------------------
          0  recursive calls
          0  db block gets
     175927  consistent gets
          0  physical reads
          0  redo size
   21958348  bytes sent via SQL*Net to client
     726508  bytes received via SQL*Net from client
      66001  SQL*Net roundtrips to/from client
          0  sorts (memory)
          0  sorts (disk)
     990000  rows processed

SET AUTOTRACE OFF

SELECT * FROM TABLE(DBMS_XPLAN.DISPLAY_CURSOR('c7su63uw7nch6',2,'ALLSTATS LAST'));

SQL_ID  c7su63uw7nch6, child number 2
-------------------------------------
SELECT /*+ GATHER_PLAN_STATISTICS */   C1,   C2 FROM   T1 WHERE   C2 =
:N1

Plan hash value: 236868917

---------------------------------------------------------------------------------------------------
| Id  | Operation                   | Name      | Starts | E-Rows | A-Rows |   A-Time   | Buffers |
---------------------------------------------------------------------------------------------------
|   0 | SELECT STATEMENT            |           |      1 |        |    990K|00:00:01.63 |     175K|
|   1 |  TABLE ACCESS BY INDEX ROWID| T1        |      1 |   5957 |    990K|00:00:01.63 |     175K|
|*  2 |   INDEX RANGE SCAN          | IND_T1_C2 |      1 |   5957 |    990K|00:00:00.68 |   67932 |
---------------------------------------------------------------------------------------------------

Predicate Information (identified by operation id):
---------------------------------------------------
   2 - access("C2"=:N1)

The foregoing is the execution plan for CHILD_NUMBER 2 - notice that this time he reports 990 000 recovered lines, it's the execution that was used - adaptive cursor sharing plan do not have take effect and force the re-evaluation of the implementation plan - implementation plan has NOT been changed for a full table scan. That's the risk you take if you allow histograms on columns that have an uneven distribution of values and bind variables are used in the WHERE clause that refers to the column.

Charles Hooper
Co-author of "Expert Oracle practices: Oracle Database Administration of the Oak Table.
http://hoopercharles.WordPress.com/
IT Manager/Oracle DBA
K & M-making Machine, Inc.

literal and bind variables
Hello

What is the difference between literal and bind variables?
What happens if I use
literal variable has.
variable b.bind

who is suggested?

Kind regards
KKK
There are two phases of any SQL performance.

1. analysis (check Oracle this SQL syntax, also generates the implementation PLAN)
2. execution (the real execution takes place)

Below, SQL.

Select * from emp where empno = 1234;

I used literal in the SQL above.

For each SQL type similar (average for empno modified value) oracle must analyze the SQL for each performance.

Select * from emp where empno =: v_emp_no;

I used the bind variable in the SQL above.

In the oracle SQL above needs to analyze once, next time ehen this SQl will be executde with the value of the bound different variable, oracle will use the old execution PLAN and analysis will be not not happed. It will be a little fast.

Also variable binding instead of literal use reduced use shared pool.

HTH

Best regards
oratest

HP first and true variable E

HP first and true variable E

Home view

example 1:

0.1 enter Sto Alpha E

Enter 8 alpha E

X ERROR: invalid exponent number

Press OK

example 2:

0.1 enter Sto Alpha E

8 * enter alpha E

.8

example 3:

0.1 enter Sto G

Enter alpha 8 G

.8

Why doesn't the first 8th?

Thanks for the quick response.

This means E as a variable is not consistent in the simple mathematical operations.

Such as:

5 b/C is ok

5th/C not ok

concerning

RS

Share the expression in step.result.numeric and locals.variable

Hello together,

I'm new in the world of TestStand and I have a simple question.

How can I share the output of a step between the expression step.numeric.result (NumericLimitTest) and a variable 'local '? I need the output of a time step value for the comparison of the limit and once to give to the next step.

Thank you

Dusan

When I open Task Scheduler and click on MSE for planning, I get the following warning. General Page initializatin has no 0 x 80070534

Original title: Task Scheduler

When I open Task Scheduler and click on MSE for planning, I get the following warning.

General Initializatin page failed,

The specific error is:

0 x 80070534: no mapping between account names and security IDS was done. Year error has occurred trying to retrieve task account informaiton. You can continue to edit the subject of the task, but will not be able to change task account information.

I then press the ok button and it goes to the task, schedule, and the settings box.

When I check in scheduled tasks, to see if they ran as planned, the last run time column NEVER said, and the status column indicates

COULD NOT START.

In the morning, I always get this error message:

A task could not run...

Do you know what I'm doing wrong? Can it be fixed?

Thank you Tim

Is there a password the user account in which the task is scheduled? You cannot schedule a task to run under a user without password account.

You can also take a look at advanced > view the log window scheduled tasks.

Questions of formatting LabekField and length

I use areas of labels to display info and lengths are different, how do I preformat so that displays the total length of space for labelling in order to avoid the cut lines to white added while I can't calculate the blank labels Legislative, forcing to view the contents without trailing blanks or preformat the chain to find out how many lines is used to see examples

ex chain is 50 length of RSC

dispalysa part and add the whites and in the other part of the remainig string line I don't want blanks to add just the cut string where the screen do not adapt and then continue on the next line

TKS

Its called Word envelope. He's trying to do what would Microsoft Word with the text. You have replaced the space with ".", but spaces are not the only characters after which return to the line will be paid to the chain. Sorry, I don't know for other languages, but in English, back to the line will split generally after punctuation characters, such as period of '. ', comma ', ', scorecard '-', exclamation point "!" and so on.

As stated above, I do not know any BB text field that won't be NOT Word wrap. I was hoping that someone else.

Assuming that we can close this off, so I think that you have to use another approach, that is to draw the text yourself. To do this, you will need to extend LabelField and substitute:

(1) layout() call setExtent with height that you really want to.

(2) getPreferredHeight() to calculate the height you want

(3) paint actually paint the text.

The most important part of this Treaty as follows to determine the height: the following is an example of how this might look like, it of just a sample, has not been compiled and will be definitely defective in some respect. But it should help you along the way.

Hope this helps
```
String label = this.getText();
int width = this.getwidth();
Font ourFont = this.getFont();
int height = 1;
String currentLine = "";

for ( int i = 0; i < label.length(); i++ ) {
    currentLine = currentLine + label.substring(i,i+1);
    if ( ourFont.getAdvance(currentLine) > width ) {
        height++;
        currentLine = "";
    }
}

// Now have in "height", the number of lines this text will require
```

Example of configuration, VPIM between the unity and Unity express

I neet to configure the network of VPIM between unit w/Exchange and 3rd-party voice messaging system and want to familize functionality. That's the analogy between unity and unity express research. I can understand between the unit and Exchange, but do not know how it works between Exchange and the express unit. specually the requirement of the domain.

Can I get the sample configuration for configuring VPIM between unit w/Exchange network and the express unit?

Thanks in advance,

Networking VPIM can be used for networking between Unity and Unity Express, just as it can be used for networking with a third-party system, however, each have their own implementation. Unity Express does not connect to the Exchange. I suggest you re-read the chapter ' using VPIM for Networking with Cisco Unity Express or other Cisco Unity Systems "to http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_feature_guide_chapter09186a0080449a39.html and Cisco Unity Express Networking guide at http://www.cisco.com/en/US/partner/products/sw/voicesw/ps5520/prod_configuration_basics09186a008035bbdb.html.

A third-party system would have concepts comparable to the implementation of unity VPIM, but would not exactly be the same - see the documentation of that system for details.

I downloaded the new version today and now I cannot edit and it seems that my plan is returned to the base

I downloaded the new version today and now I cannot edit and it seems that my plan is returned to the base

you have installed something today from adobe, and now you cannot change something?

If Yes and Yes, that have you installed and you want to change?

I got a lot of C cloud photographers present (Lightroom and Photoshop). I have an office and an alaptop on the plan and you want to add a second laptop. How can I do this?

I got a lot of C cloud photographers present (Lightroom and Photoshop). I have an office and an alaptop on the plan and you want to add a second laptop. How can I do this?

Hello

Please try to sign in and out activate Cloud Creative applications

Concerning

I can't upgrade to the students and teachers all the apps plan

I have a free subscription to creative cloud and I'm trying to plan upgrade for the students and teachers all of the apps, but whenever I have to fill in the details, then click on confirm that it simply reloads the page. I'm doing something wrong?
Thank you
Josh

Hello

Please try it on another browser.

You can also contact customer service for queries.

Kind regards

Sheena

I bought the photo Illustrator and ask the Adobe site plan for individuals with credit cards, but to date I have not received the confirmation email. How can I contact for more information on the good end of the order?

Hello 11/18/2015 I bought Illustrator photo and ask the Adobe site plan for individuals with credit cards, but to date I have not received the confirmation email. How can I contact for more information on the good end of the order?

Your subscription to cloud shows correctly on your account page?

If you have more than one email, you will be sure that you use the right Adobe ID?

https://www.adobe.com/account.html for subscriptions on your page from Adobe

.

If Yes

Some general information for a subscription of cloud

Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

-Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

-http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

-ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

-http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

.

If no

This is an open forum, Adobe support... you need Adobe personnel to help

Adobe contact information - http://helpx.adobe.com/contact.html

Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

-Select your product and what you need help with

-Click on the blue box "still need help? Contact us. "

do all updates to date and new features with the plan of photography?

It's a little unclear to me if this is the case.

Hello

Yes absolutely, you get all the updates and new features with the plan of photography.

You'll have to use lightroom as well as photoshop.

Reference:-Creative Cloud price and membership plans | Adobe Creative Cloud

Unity and length Variable Extentions/Dial Plan

Similar Questions

Maybe you are looking for