Unknown device &; network controller in device for Lenovo G450 Manager
Hi, in my lenovo G450 - with Chipset Intel - 3 GB of RAM (no external graphics card),
I see an unknown device with question mark on device Manager, under Win XP. Further clicking on properties of the device tell me that--
Device type: Other Devices
Manufacturer: unknown
Location: On Microsoft ACPI - controller embedded compatible.
I installed all the drivers and that you have not installed the external devices such as USB etc.
I don't get what device it could be.
Network controller shows also with question mark, even after installing Broadcom Ethernet Driver for XP.
Kindly help me what to do?
Is there any order, where we need to install the drivers.
Re-install the drivers ethernet and power management.
Tags: Lenovo Notebooks
Similar Questions
-
EliteBook 8460p: unknown device for ellitebook p 8460 for 32-bit
I need driver for my loptop. I installed win 7 pro and he started giving me the error "Unknown device" it shows 'HPQ00004' in the Details tab.
Please help me find the solution
Thank you
lyes
Hello
Download and install HP 3D DriveGuard from the following link.
Kind regards
DP - K
-
PCI, unknown devices for pavilion m7378a
Hello
I have a yellow question mark next to PCI and unknown devices in Device Manager. Please allow me to correct it.
I had a lot of these yellow markings and fixed them by download or install all the drivers in the list located here.
http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=228&LC=en&DLC=en&cc=au&lang=en&product=1848288
Thank you
Message edited by Muttcroak1 on 11/10/2009 19:01Right click on the device, choose Proprietes.dans the window that opens look for "Détails" tab at the top. A click on it. In the next screen, you will have a drop-down selector choose "hardware id". Once you choose that a list should come with id.
I suspect it is maybe your TV Tuner... or is it installed?
-
Unknown device for HP elitebook 2760p driver
I think I need to give more info to my question on the pilot "unknown device". My laptop is the HP Elitebook 2760p with windows 7 Home premium and I need a driver more called "unknown device". I found these numbers to the pilot: Port_ #0001.Hub_ #0004
Hi again,
The driver you need is: validity fingerprint sensor driver
I connected the driver under xp-> 8.0 and 8.1
Please let me know the result.
-
Driver required for unknown device for HP Pavilion G6 2141ca Windows 8.1
Dear friends, please help me if you could.
I installed Windows 8.1 on my laptop HP pavilion G6 model 2241sa.
almost all of the drivers have been installed automatically. In addition, on the HP support site, I downloaded all the drivers for similar model (2241nr)
I installed everything one be. All works, BUT a device is not recognized...
Here are some details of it:
It says device unknown (in the other group of devices) with yellow exclamation point. Location - PCI Express Root complex. the device name of the BIOS - _SB. PCI0. ACEL, hardware ID - ACPI-VEN_HPQ & DEV_0004. This is all I have on this device.
Please help me determine which driver I need and which device? Thanks a lot a lot for the input.
Hello:
You need this driver...
-
Unknown device for Envy 13, drivers needed!
I gave my laptop a facility clean and formatted the disc (thereby losing the drivers). So far, I've installed all the drivers downloaded from the site of hp to win7 64 bit with success, except a single device is still unknown.
The error code is 28.
The hardware ID is ACPI\HPQ0004.
The path of the device instance is ACPI\HPQ0004\2 & DABA3FF & 1.
My laptop model No. envy 13-1050ef is.
Also, is there a download for ios of envy, or will part in the near future? Because it shows whenever I turn on the laptop and is a little awkward.
Thank you!
Have you installed HP ProtectSmart Hard Drive Protection? It's on your drivers page:
http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=4063&LC=en&DLC=en&cc=us&lang=en&product=4033908
-
Portege R500 - I've got two unknown devices after installing XP
Hello
I am looking drivers for the two unknown devices in the hardware Manager:
alias
"Intel(r) 82801GBM (ICH7-M/U) LPC Controller"
and
'System compatible ACPI Microsoft'Thank you
RogerHello
Have you installed all the drivers Toshiba XP which appear on the European driver from Toshiba site?
There is also a training installation document that gives the proper installation order. Please check if all the XP drivers were installed, as mentioned in this doc.
In addition, you should check if you have installed the MS WinXP SP2 and Utility Intel chipset.
Greetings
-
"Unknown device" in my device manager - but the system ready to use?
Hi everyone, it's me again.
I have just bought (and already exchanged for a second) a device that I want to install on my desktop. This is a Hiyatek Multi multi-function which is mainly for media card reader options provided. There is also a USB 2.0 port, fan controller, taken mic and speaker jack ports as well as the different media slots. The device is supported by Win XP
I have the same problem persisted with this device (which I connected to the only place where I can find for the USB cables) which shows as "Unknown device" in my equipment manager. The statement indicates that Microsoft software should automatically detect the device and install the drivers for me however, the bubbles of pop-up information "Found New hardware" followed by "Unknown device" followed of "your device installed and ready to use" HUH! How can it make sense please...
Peripheral installation mini disk that came with the camera auto works when it is inserted, but this process is stopped because the device was not recognized.
On the motherboard to point plugin, I did reference has been used to connect my 2 front mounted USB 1.0 ports (which have now been removed) and the connector for that was a plug of white pine of 10 or 12. The new tracks to the device, I am trying to install are 4pin sheets I've located in the same orientation as the big white connector. There are some images here...
http://i812.Photobucket.com/albums/zz48/Vanguard_01/HiyatekUSBcables2.PNG
http://i812.Photobucket.com/albums/zz48/Vanguard_01/HiyatekUSBcables1.PNG
http://i812.Photobucket.com/albums/zz48/Vanguard_01/Managerdisplay.PNG
As a result, the only things that work on the new Panel are the speed controller and the speaker port.
Also today I installed a PCI card with USB 2.0 with 3 other additional ports on the front of my machine but there is no extra connection on the card (for these 2 4 sheets, I mentioned earlier), which appear to be installed correctly from the 3rd link image above.
I need to know if I connect it correctly or do I need to get some software from somewhere.
Thank you
Vanguard_1
The answer was there in front of me!
I got a response from Hiyatek who pointed out that cable sequence was not the same on the new sheets for my device even if they had stipulated it also on the box that it was compatible with USB 1.0 to the motherboard connections. The Green and white wires were knocked down in fact (this can be seen in the pictures). I now spliced the old Plug and the wires on the wiring of new device and it works.
I was however not aware that there are differences in the wiring of the plug between the connections USB - is - this current?
Vanguard_1
-
Driver for network controller error
Hello
I ve just reinstalled win 7 on my hp 655.
After you install all the drivers listed in the kit of drivers, Device Manager still shows yellow triangle for the network controller and thus for the PCI device.Anyone know the solution?
Thanks in advanceHello:
First install the AMD chipset driver and restart. You want the first file on the Web page.
http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64
Then install the Atheros WLAN driver.
Try the card directly reader driver from Realtek. You want the first file on the Web page.
-
Lenovo Energy Management silent install
Hello
I'm deploying Lenovo Yoga 2 Pro via sccm with drivers/software preloaded in the company. I am quite aware that this model is not ment for the company, but it is requirement.
For now the deployment looks good, except one software: Lenovo Energy Management 1.0.1.49.
Link: http://support.lenovo.com/us/en/products/laptops-and-netbooks/yoga-series/yoga-2-pro-lenovo/download...
This software is installed correctly when I run the installer manually with double click, but refuses to work in silent mode or unattended. Public documents, unfortunately, is not available on the Lenovo drivers download pages.I spent a lot of time looking for silent switch manually, but all without success. In the best scenario complete installation with the code output-3. I saw via procmon this real called 2 MSI (command lines are hidden) and perform additional configuration as installation drivers with dpinst, installation of the device through devcon, registration of dll and the calling application executables. For now, I just couldn't operate without initial installer.
I'm pretty sure that Lenovo factory this software is preinstalled on the PC with a sort of silent command. Is it possible that someone who closely works with OS preload Lenovo provides this command line silent for Lenovo Energy Management 1.0.1.49?
It may also be that another version is preinstalled when buildings of the factory, so yes, it would be nice to get that media.
Thank you much in advance.
Hello
Thanks for the response, but no need already.
I found another version of the management of the energy that was silent-installation capable and was incompatible with Yoga 2 Pro (no official compatibility in the documentation of the software however). This version has me led to the solution - he had Setup.iss file as well as initial setup.exe, which v.1.0.1.49 had no downloadable media.
So, to install v.1.0.1.49 of energy management that I had to run it with the r switch, get Setup.iss file in the %windir%\System32 folder and now it installs with Setup.exe /s/v/qn perfectly.
Hope this helps someone.
-
HP Pavilion g6 - 2201Ax
Windows 7 Ultimate 64 bit
Hardware ID:
1 Bluetooth controller
PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C & REV_00
PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C
PCI\VEN_1814 & DEV_3298 & CC_0D1100
PCI\VEN_1814 & DEV_3298 & CC_0D11
2. Ethernet controller
PCI\VEN_10EC & DEV_8136 & SUBSYS_184AEC103C & REV_05
PCI\VEN_10EC & DEV_8136 & SUBSYS_184AEC103C
PCI\VEN_10EC & DEV_8136 & CC_020000
PCI\VEN_10EC & DEV_8136 & CC_0200
3. network controller
PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C & REV_00
PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C
PCI\VEN_1814 & DEV_3290 & CC_028000
PCI\VEN_1814 & DEV_3290 & CC_0280
4. PCI device
PCI\VEN_10EC & DEV_5229 & SUBSYS_184AC103C & REV_01
PCI\VEN_10EC & DEV_5229 & SUBSYS_184AC103C
PCI\VEN_10EC & DEV_5229 & CC_FF0000
PCI\VEN_10EC & DEV_5229 & CC_FF00
5 unknown device
ACPI\HPQ0004
* HPQ0004
Need to install these drivers for Windows 7 64-bit OS.
Hello:
HP does not provide support for earlier operating systems on their use of the PC, this is why there is no W7 drivers for your model.
Below are the drivers you need:
1 Bluetooth controller:
2 Ethernet Controller:
3. network controller:
4 PCI device:
5 unknown device:
Have you installed the AMD chipset driver for smbus controller and usb controllers installed 3? First download listed.
http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2
Do you need graphics driver?
If so, it's here.
-
HP ENVY m6 - 1188ca Notebook PC
64-bit Windows 8
Hardware ID:
1 Bluetooth controller
PCI\VEN_0814 & DEV_1288 & SUBSYS_18AC1034 & REV_00
PCI\VEN_0814 & DEV_1288 & SUBSYS_18AC1034
PCI\VEN_0814 & DEV_1288 & CC_0D1100
PCI\VEN_0814 & DEV_1288 & CC_0D112. network controller
PCI\VEN_1814 & DEV_2290 & SUBSYS_18C8103C & REV_00
PCI\VEN_1814 & DEV_2290 & SUBSYS_18C8103C
PCI\VEN_1814 & DEV_2290 & CC_028000
PCI\VEN_1814 & DEV_2290 & CC_02803. Pci device
PCI\VEN_10EC & DEV_5289 & SUBSYS_18A6103C & REV_01
PCI\VEN_10EC & DEV_5289 & SUBSYS_18A6103C
PCI\VEN_10EC & DEV_5289 & CC_FF0000
PCI\VEN_10EC & DEV_5289 & CC_FF004. unknown device
ACPI\VEN_HPQ & DEV_0004
ACPI\HPQ0004
* HPQ0004Hello:
Try these drivers...
Wireless:
http://h20565.www2.HP.com/hpsc/SWD/public/detail?s wItemId = ob_148570_1 #tab1
Bluetooth:
http://h20565.www2.HP.com/hpsc/SWD/public/detail?s wItemId = ob_147890_1
Dev PCI:
This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.
File name: sp58542.exe
HPQ0004:
This package provides the HP ProtectSmart Hard Drive Protection software (HP 3D Driveguard) for the laptop models running a supported operating system. HP (HP 3D Driveguard) ProtectSmart hard drive Protection software protects the hard drive of "parking the heads ' if the laptop fell accidentally, or is suddenly hit by another object.
File name: sp61037.exe
-
Help!
Dear Sirs,
I have Lenovo ThinkPad T60 8744-4XG Type.
After installation WINDOWS 7 after installation of all modern drivers of devices and BIOS (v 1.18), in Device Manager, I have a warning:
!!! unknown device Intel 82801GBM interface Controller - 27 b 9 (ICH7-M) LPC
Where can I find the device driver for Intel 82801GBM interface (ICH7-M) LPC Controller - 27 b 9 for WINDOWS 7?
I think for WINDOWS XP and WINDOWS 2000
In automatic mode in INTERNET the system cannot find this driver.
Are there for WINDOWS 7?
Help, please!
I installed Intel SSD 160 GB drive in my Lenovo T60 and now it is very fast for laptop!
But it is not normal, if the last driver not installed in the system (all the other drivers has been installed successfully)
Thanks in advance
-
Hello
I have a problem with a driver, I tried to download from the HP official website, but not of all the pilot succesfull installed on my laptop.
Missing driver is: network controller, PCI simple communication controller, unknown device
My laptop: HP Pavilion 14-v202tx with Win 7 64 - bit OS
Help me
Hello:
You need these drivers wireless and bluetooth...
Driver LAN wireless Broadcom
File name: sp69014.exe
Software and driver Broadcom Bluetooth 4.0
File name: sp66402.exe
ACPI\HPQ6007:
HP 3D DriveGuard Software
File name: sp67280.exe
-
I need the driver for ethernet controller and network controller driver, driver pci device video controller for Windows 7 Home Premium 64 bit driver
Someone please help
PCI\VEN_10EC & DEV_8136 & SUBSYS_148A103C & REV_04
PCI\VEN_10EC & DEV_8136 & SUBSYS_148A103C
PCI\VEN_10EC & DEV_8136 & CC_020000
PCI\VEN_10EC & DEV_8136 & CC_0200PCI\VEN_14E4 & DEV_4727 & SUBSYS_145C103C & REV_01
PCI\VEN_14E4 & DEV_4727 & SUBSYS_145C103C
PCI\VEN_14E4 & DEV_4727 & CC_028000
PCI\VEN_14E4 & DEV_4727 & CC_0280PCI\VEN_10EC & DEV_5288 & SUBSYS_148A103C & REV_01
PCI\VEN_10EC & DEV_5288 & SUBSYS_148A103C
PCI\VEN_10EC & DEV_5288 & CC_FF0000
PCI\VEN_10EC & DEV_5288 & CC_FF00PCI\VEN_8086 & DEV_A012 & SUBSYS_148A103C & REV_00
PCI\VEN_8086 & DEV_A012 & SUBSYS_148A103C
PCI\VEN_8086 & DEV_A012 & CC_038000
PCI\VEN_8086 & DEV_A012 & CC_0380Hello:
See if these drivers work...
PCI\VEN_10EC & DEV_8136:
This package contains the driver for the Realtek NIC installation files in the notebook models and operating systems.
File name: sp49600.exe
PCI\VEN_14E4 & DEV_4727:
FTP://ftp.HP.com/pub/SoftPaq/sp57501-58000/sp57965.exe
PCI\VEN_10EC & DEV_5288:
This package contains the installation files for driver for the Realtek card reader for laptops models and operating systems.
File name: sp49599.exe
PCI\VEN_8086 & DEV_A012:
Maybe you are looking for
-
I have been using Thunderbird as e-mail longer than 10 years. Just a month or two ago, my files appear lower on the side of the program. I save and mail saved in these files but have no way to access that saved mail. I can see the folder using Window
-
Docking for Satellite P100-160
I am struggling to find how compatible with my Satellite P100-160 docking station.What they do a?Could I use any docking station?Where can I get a (or even at all)? Please excuse my ignorance, but I'm kinda a thickie when it comes to this sort of thi
-
My computer frooze to restore my son to the factory settings. Now, everything I had on my computer disappeared? The only restore point is for today? How can I take it back to yesterday?
-
Missing actor of dialog box Message Maker
In Labview 2015 should be an actor framework Message Maker dialog box. "I create a new project from actor Framwork model, but can not find in the Tools menu" actor framework Message Maker. In the context menu of the Task.vi in Alpha.lvclass I have ac
-
HP 1200 All in One Printer getting error this printer is blocked
A very old printer. My disc is cracked and are no longer available to buy even HP. I get an error message, the printer is blocked. I have not checked, no jam and reset the same mistake remember coming upwards, and still unable to print.