Unmasking the exported files file name extension

Similar Questions

• Cannot install - the downloaded file name extension is .7z and I am not able to open it

  Hi all

  Hope someone can help. I just downloaded my Creative Suite, but can't install the program that my computer does not recognize the file name extension ending with.7z of a 7Z file.

  DesignStandard_CS6_LS16.7z

  What's next?

  Mata

  You can download the files from the link Atul mentions above.

  Under Windows, there is a .exe file and usually a .7z file.

  Download the two files in the same folder and run the Exe file to start the installation

  If you have additional questions, please see the instructions to extract the files and install your product.

  Guinot

• in the export file name changes loses link catalog

  I'm a newbie LR3 (or any version of LR also). Been using CS4 and CS5 now for a little over a year

  & became comfortable with 5 Raw and Raw 6 now.

  I have the wierdest thing happen when I 'import' my photos in LR3 (no matter if it is a card or an external hard drive). I have created a preset in the section file to change the name of the file to import handling. So instead of the file DSC_0001.jpg, the preset I replace it (then), Mikes_photos_20100725_DSC_0001.jpg. Export works very well, everything is great. I even let LR running (and tried to restart the computer or the program), but when I get back later, the catalog cannot find pictures (image of low resolution cat., but not on the picture). I said that it cannot find "DSC_0001.jpg. It's right there in the folder it is looking, but the new name - given the file by LR3 when importing is no longer the short name but the most recent long name. When I click on the new name, he said something like, "make sure that you want to link this since both names are not the same?

  Does anyone else have this problem or can anyone tell me if I'm doing something wrong?

  Make backups to import? Is to make a second copy enabled in the import dialog box?

  I just reproduced the error rename you described (and mentioned in the thread I linked above): when you have backups to import enabled and a file with the same name already exists in the backup location, rename it on import will fail and leave a broken link between the catalog and the file.

• Some Excel files download but do not show associated with Excel or seem to have no file name extension.

  Some Excel files download but do not show associated with Excel or seem to have no file name extension. If I download these files using Internet Explorer, they open properly. I can add xls or xlsx file and it will open properly with Excel. If I select the file open the 'Open with' dialog box and I If select Excel, the file does not open at all... nothing happens and Excel does not open. The excel in the picture as an attachment file are those where I added the excel file name extension.

  Unfortunately, the way that Firefox gives the name of file is more literal and less improvisational than Internet Explorer, you may need to add this extension .xls or .xlsx yourself from time to time.

  If you want to do it in the shortest time, you can change the immediate download to ask you where to save the file, which also foresees the possibility to change the file name. If you want to try it, the setting is described here: start-up, homepage, tabs and download settings.

• How to change a Movie Maker file name extension

  I am trying to load a video You Tube and Facebook of Movie Maker on Vista, yet both programs say that they do not support the MSWMM file name extension. How can I change the extension wmv or something supported by these programs without destroying the file?
  I already changed the position of file name by renaming the file, but it destroyed and I was not even able to see.

  Hi Linsala,

  Try highlighting your video on the collection list and then clicking Save film on top of the toolbar. Go through the steps and it should save it as a wmv.

  If you have any other questions, don't hesitate to ask. We can't wait to hear back from you with your results. Brian
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't export my files (raw, jpg, tiff, any). always a notification "the path of the exported file cannot contain special symbol '='. ' is displayed. Why? I don't know what is the path to the file. at least, file name is not special symbol.

  I can't export my files (raw, jpg, tiff, any). always a notification "the path of the exported file cannot contain special symbol '='. ' is displayed. Why? I don't know what is the path to the file. at least, file name is not special symbol.

  The path of the file is the full description where the file is located in the language of the operating system, including drive, directory and file name and extension.

  

  In the above example, the file path combines the two circled items-"E:\Webpix" and "BleedingHeart.JPG", the path to the file would be "E:\Webpix\BleedingHeart.JPG".  If you do not have an equal sign in the name of the file, you must have one in the folder or the equivalent.

• Cannot unselect the file name extensions and hidden items

  Nice day

  I use Windows 8 Pro. I noticed that all my files file name extensions
  are visible, so I went in to my folder and under show/hide display board, I saw that "File name Extensions" are checked
  and "Hidden Items" unchecked.
  I then tried to uncheck "File name Extensions", but nothing happens. The checkbox just reappears and I can't delete
  the name of the file extensions, so to speak. Also I cannot view my hidden object because when I check this box it displays a check mark
  for a split second and then it is still a time unchecked.
  I also went in Folder Options in Control Panel, click on "View files, folders and drives" and I checked
  him "Hide extensions of known file types" applied, but nothing happens. When I reopen it the Folder Options both of them
  Yet once are unchecked.
  If anyone can help me in this matter, it will be appreciated gratefully.
  Concerning
  Rohan

  Hi Rohan,

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, you can't hide from the files extensions and show hidden files in a folder.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  To provide the proper resolution, that I would need more information on your side.

  The problem is specific to a particular file?

  This problem can occur because permissions, corrupt user accounts or even damaged files issues.

  We will first of all, try the procedure described in the article and check if that helps.

  "Access denied" or other errors in the access to or work with files and folders in Windows
  http://support.Microsoft.com/kb/2623670?WA=wsignin1.0#Method2

  Note: Try the steps under 2nd edition:

  See the article for more information.

  How to work with files and folders
  http://Windows.Microsoft.com/en-us/Windows-8/files-folders-Windows-Explorer

  Let us know the status of the issue after you perform the troubleshooting steps. If you need help or information about the issue with files, I'll be happy to help you. We, at tender Microsoft to excellence.

• Lightroom CC adds "-2" before the extension to the import file name with rename

  For some reason, my Nikon D7200 is producing filenames with a underscore ("_DSC0001.nef").  No problem.  What I'm trying to do is to rename the files during import.  I set up a model as follows:

  

  Instead of getting 'HJRW_20150907_DSC0001 '. NAVE' I get 'HJRW_20150907_DSC0001-2. NAVE.

  I deleted the files from Lightroom and reimported as COPY or MOVE, and get the same thing.  How to remove the Lightroom file name suffix is added?

  Thank you

  -Herschel

  This occurs because a file already exists in your operating system with the same name in the destination folder.

• Cannot delete a file in windows 7. Indicates the specified file name is not valid or too long.

  Hello everyone, I'm pretty stuck here. I can't delete a file in windows 7 or any other do with it besides. Says "the specified file name is not valid or too long. It has a funny name [~ t] and no extension. The file type, say "file". The properties are all screwed looking with a mistake on the Security tab, a size of 0 k, is a Windows (c) \Windows\en-US.The other files in this folder appear normal. The computer seems to work very well without any obvious problems. The only problem is my anti-virus reports with a kind of syntax for the file error and indicates it cannot parse this file. I do not. I can't do a thing with it either. Cannot open, rename, move, delete, change passwords, properties, permissions, nothing. It may be necessary for a good part with 0kb. According to me, I want to just delete the thing. Please, anyone? Thanks in advance.

  Hey bud, I figured out how fix it earlier. I am so happy. I came to remember a command called chkdsk which worked very well for various issues, that I had since the construction of my old 2000 Professional machine. I think that one was my first NTFS system. I always liked how well he error correction. Seemed a lot better than the old scandisk. Low and behold, I tried and star ANISE, it is went through it, found this file almost from the beginning of the analysis and a few lines later, he said has been removed. Says something about the file being orphaned some time ago. It was a very bad child, that I tell you. I ran it in safe mode command prompt. I guess he would have done the same thing in the normal windows well, but I happened to be in safemode, when it came to me. I used the switch /f with her. Since the C:\ command prompt or any drive letter your operating system is selected, type CHKDSK/F if I remember although the f was to have it automatically CORRECT errors. I hope this info helps others with their file or disk problems. It seems that many people say they get mistakes and cannot delete various files here in these forums. Thanks Sandeep for answering me and try to help. It does not matter whether or not it was the fix, it takes time to post and your helping people learn to be it. The only thing that remains unanswered for me is actually the thing of the answer. I mean I can't say someone at - it really answered my question and do not count me? Maybe I should mark so that people will bother to read it and get the fix. HMMMM... I come back here some time later and see whats up.  SeeYou, EWOO

• Directory of the exported files

  Hello

  I use the 10 database,

  I export my database, but I don't know where to find the export files?

  I use this command to export the database

  exp scott/tiger

  It will be the place where, in the command prompt, you wrote this command. "exp scott/tiger".

  the default name of this file will be "EXPDAT. DMP"If you have not given any name when running.

• How does NOT save a file name extension?

  Hey everybody!

  I have a script for Photoshop > > extension a bit > > I click on a button and the script save the .jpg file into a png (with extra stuff "of course") file in the same folder.

  Works like a charm...

  But when it comes to the original file name: exemple.jpg

  I get this png file name: example.jpg.png

  I save the file name and path with this code:

  filePath = app.activeDocument.path + '/' + app.activeDocument.name; + '.png';
  

  The goal is to get rid of the section '.jpg' the new file name.

  I tried to save file name in a variable and then reduce the number of characters or even save it without the extension, but no luck.

  any ideas? !

  Thank you!

  var name = app.activeDocument.name;
  If (Name.indexOf(".")! = - 1) Name = Name.substr (0, Name.lastIndexOf("."));
  filePath = app.activeDocument.path + "/" + Name + ".png";

• file name extensions

  I can't file name extensions to display in libraries, etc.  Windows Help says I should go to folder properties, display and click Advanced settings.  There is no advanced showing settings button.

  Hello

  In Folder Options, select the view tab and Remove the tick in the box "Hide extensions of known file types", then click on apply then Ok to save the setting.

  Kind regards

  DP - K

• transfer with catalog will use the same file name

  Hello everyone, I evaluate the cloud of Lightroom version. I have a MacBook that I use on a trip to import and did a first job on my photos, so I have a home NAS at home where store pictures and do most of the work.

  I want to transfer RAW files, but all the work with the MacBook on the NAS, I tried to use "export as catalog" and then "import a catalog" with options to move the files, it works but it keep the old file name and it does not put them in a folder with a different name. For example, if on my Mac, I work with a folder named '2015' and then transfer into a folder with the same name on the NAS Server everything works fine, but if I made a folder called 'photos' to work on the MacBook, and then I want to transfer everything on my NAS under the folder "Hawaii", everything is put under Hawaii\photos\ instead of Hawaii\

  I'm having a hard time understand what you did. But the best thing to do would be to highlight all the images in the Hawaii\photos folder and drag them to the folder of Hawaii. You can simply delete the folder of pictures and everything should happen as you wish. Do all the going in Lightroom and it should be simple and quick.

• I tried a trial version of lightroom 6 and edited hundreds of photots I need to find the export files are small non-printable, about 600 kbs. So I bought lightroom 6 hoping to save my changes on all the photos. However with my purchase of more than a week

  I tried a trial version of lightroom 6 and edited hundreds of photots I need to find the export files are small non-printable, about 600 kbs. So I bought lightroom 6 hoping to save my changes on all the photos. However with my purchase of more than a week, my picture exports are still about 600 kbs. Not printable! I'm signed and registered. Whats happening?

  Looks like you have been in the library module and chose with a preset export or export to email. Whatever it is, your Presets 'export' were to reduce the size of the image exported to about 600 k.

  In Lightroom, the library module and under the file menu, simply select the Word Export. Who will open another dialog box. GO through each option in this dialog box to choose where you want to export the file, what color space to use, what name to give to each folder, what metadata to include and do not forget to select the export size! I included a few screenshots for your reference.

  If you export exactly the same path several times, you can create your own export preset to make this process faster.

  

• Incompatibility of mushup. On timeline files are not the correct file names. Assistance requested...

  I don't know how it happened, but I have a strange situation where a video published on the timeline shows his name as... 7894.avi but it's actually 7892.avi if you right click and select 'Properties' or look in Windows Explorer.

  The film is mjpeg, 1280 x 720 30 p. The problem is that I am using (or trying to use) an EDL exported from this chronology to import the corresponding change in the other channel of a stereo pair. I used this method in the past on projects 3D in PPro CS4 on the same machine and OS (win7) without any problem.

  Clip numbering is tweaked throughout the entire timeline and therefore any EDL is frame for chassis length, but with the wrong film.

  This rings a Bell for anyone? Any ideas on how to force a change in file name?

  TIA,

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  (< *) # > <

  Any ideas on how to force a change in file name?

  Select the item in the project Panel, right-click and select "replace the film...". »

  You will then have a box that gives you the ability to "Rename the video file name".

  This method will also rename the items already in your editing.