Incompatibility of mushup. On timeline files are not the correct file names. Assistance requested...

Similar Questions

• Error: It's not the correct recovery disks.

  I replace the hard drive in the pavilion a6432f pc desktop by using the recovery cd and keep the error message: these are not the correct recovery disks. Ive checked that the AUCTION # s match of the cd recovery with SUBMISSION # on the bottom of my pc. The only option Ive been able to find online is also install another operating system.

   

  I have a problem with that. The only other operating system, I have Windows XP and the pavilion a6432f supports Windows Vista, so there is no drivers for some of the critical components of the system.

   

  Y at - there someone who can help me with this problem. I have not either the option of performing from the hard drive. The previous hard drive has failed and been replaced since the mfg'r. That's why I'm using the recovery cd

  It is usually a problem with the BIOS that is causing the problem.  Recovery checks the BIOS to determine the model and other info before it will install to prevent recovery used on discs machine no HP or on the wrong model of HP machine.

  It usually takes HP service to insert the correct information in the BIOS.

  Have you ever used before recovery disks?

  Any material changes other than the new HDD machine?

  Windows 7 would be a nice update to the machine. Win 7 has an abundance of builtin driver support, and if necessary most Vista drivers work in Windows 7.

• CC works on all my other devices except my laptop. CC files everywhere are not the synchronization in the folder of files on my computer cloud creatives.

  CC works on all my other devices except my laptop. CC files everywhere are not the synchronization in the folder of files on my computer cloud creatives. When I try to open it online, it gives me the error message which is something like "this page is temporarily unavailable. We will return soon. "and"we are working to solve the problem quickly and we're sorry for the delay. Please check back or visit our site in the status updates. "But then I go to the website of the State and either, he said all 'normally works' where it says there is an error but it was"resolved"but error sign icon still appears in the menu dropdown. What should I do to solve this problem and come back if it is old auto synchronization?

  Hello:

  Could it please check the synchronization of files is enabled in your application of creative cloud? Please go to the creative cloud > creative cloud > files and verify that the synchronization on / off is on. If your synchronization of files has been enabled, but you still cannot sync assets compared to the clouds in your local creative cloud files folder, then we need more information to understand your question. Could you please use the log collector (https://helpx.adobe.com/creative-cloud/kb/cc-log-collector.html ) and send me the zip file on your two [email protected]machines? And please, please provide the information below:

  • Adobe ID:
  • Forum post link:
  • File or folder of the specific names that are affected:
  • You use creative collaboration Cloud:
  • How many computers you use with creative cloud:
  • Type of internet connection (Ethernet/WiFi):
  • Using a proxy (Y/N):
  • Firewall (no/company/Local):

  Best regards.

  Lin

• The photos are not displayed correctly in Firefox, but displayed correctly in Safari and Chrome G.

  Display of Firefox about that clients site problems:
  http://gardenia.dk/collections/collection/

  The photos are not displayed correctly in Firefox - only a very little bit of the image is visible, bad scale (displayed correctly in Safari and Google Chrome).

  Can I do anything to make it work in Firefox, too?

  Kind regards
  Annette

  You do not see the thumbnail, but the big picture because the width of the thumbnail image is set to 500.

  Add code to the userContent.css file.

  • http://KB.mozillazine.org/userContent.CSS

  The file userChrome.css (UI) customization and userContent.css (Web sites) are located in the chrome folder in the Firefox profile folder.

  • http://KB.mozillazine.org/Editing_configuration

  @-moz-document domain(gardenia.dk){
   a.thickbox > img { width: 120px !important; }
  }

• Try to use Windows Update to install 2 updates, get "updates are not configured correctly. Restoration of the changes

  Try to use Windows Update to install 2 updates (Windows Internet Explorer 9 for Windows Vista) and an a security update Cumulative for Internet Explorer 8 for Windows Vista KB253048. It's on a laptop at home unique stand alone, works with Windows Vista Home Premium SP2.

  Windows Update initially reported two updates correctly installed and asks me to restart the PC, what I'm doing. Before the connection at the reboot prompt, I get a message saying "updates are not configured correctly. Restoration of the changes. It is the next messages saying: step 1/2/3 of 3 0% complete.
  After I then connect I get the message ' Windows to not install important updates.

  Update history reveals the KB253048 cannot install (error 80070005), but IE9 installed successfully. However when click on the IE icon and run Internet Explorer version 8 of Internet Explorer, I get, not version 9.

  I tried to do this several times on 2 days, but get same problem.

  This gives a shot.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself.

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) via Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of Norton 360 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately!
  
  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. IMPORTANT - DON'T SKIP THIS STEP! Open Internet Explorer, to http://support.microsoft.com/kb/971058 of => & run who fix it in methods AGGRESSIVE then by DEFAULT. [1]

  10. restart one last & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  =======================================
  WARNING: MS MVPs represent or work for Microsoft
  http://MVP.support.Microsoft.com/GP/mvpfaqs

• When I reboot after installation of service pack 2, the message comes out and says that updates are not configured correctly, returning from changes

  When I reboot after installation of service pack 2 on a computer laptop with Windows Vista Home Premium 32-bit Dell XPS M1530, the message comes out and says that updates are not configured correctly, returning from changes. Do not turn off your computer. I installed update readiness tool, but it does still every time. I tried to disable the antivirus software prior to installation.

  Hello
   
   
   
  1. how you try to install Service Pack 2?
  2. are you able to boot to the desktop?

   

   
  Method:
  Step 1: If you are able to start the computer in normal mode, then try a clean boot.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135
  Please note: after troubleshooting, start the computer in normal mode.

   
  Step 2: Try to install Service Pack 2 manually.
  http://www.Microsoft.com/en-us/download/default.aspx
   
  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791
  
   
   
  If you are unable to start the computer, then you can follow this link to start the computer in safe mode.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
   
   

   

  If you are unable to install Service pack 2, you can consult this article.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

  Please note: method 2 refers about upgrade on site.  Perform a repair installation/place will not damage files and applications that are currently installed on your computer.   However, I suggest you to back up all important data on the computer before you perform the upgrade on the spot.

   

   

   

   
   
   
   

• Updates defective installation as computer repeatedly sending message: "changes in the restoration. Updates are not configured correctly "." What should I do?

  Faulty installation of update as a computer several times to send the following message: "changes in the restoration. Updates are not configured correctly "." What should I do?

  Hi NickGodin,

  You can try these steps and see if it helps.

  Step 1:

  If you are unable to boot into normal mode, you can read the following article and try the steps to run the system restore.

  An update is not installed successfully when you try to install the update in Windows Vista and Windows 7

  Step 2: When you are in normal view, you can see the history of update to discover the update has failed as a result of the article:

  See the Windows updates are installed

  Step 3:

  You can also try to download and install the stand-alone package with updates from the Microsoft Download Center.

  a. to download updates from the Microsoft Download Center

  b. Enter the item number in the field search and download the same.

  c. double-click on the downloaded file.

  d. click on run and follow the wizard to install it.

  Hope this information is useful.

• The photos on my site header are not formatting correctly in Mozilla. How can I fix it?

  Hello

  Photos header on every page of my site are not formatting correctly in Mozilla. The photos appear on the right side of the site and you need to scroll over to see. They work on other browsers such as Chrome and Safari. How can I fix it? Here is the link to my site: http://cpd.berkeley.edu/.

  Thanks for your help!

  What is even more strange, is that if you reload the page in version 33, it's in the right place. This happens on the Beta? https://www.Mozilla.org/en-us/Firefox/channel/

  If the problem persists, please clear the cache and refresh the page, then if it happens again please webcompat.com create a bug here report.

• Re: Satellite P300 - display colors are not displayed correctly

  A few months ago appeared a strange problem with my laptop screen as you can see in this video made by me: http://www.youtube.com/watch?v=tjpsXNB6prc

  I tried to tilt the cover but without results. Sometimes it comes back normal picture all of a sudden. If I close the lid when I stopped the laptop, when the next market problem appears.

  With the help of Corel, I noticed that the RGB colors are not displayed correctly. I connected the laptop to a VGA monitor and the image was normal.

  I would like to know what the problem is so that I am able to fix it myself.

  Thank you.

  Hey Buddy,

  It of great that you've made a video of your problem, most other users don t do that, but it makes history. :)

  In any case, it is really hard to say what part is causing this problem. Either it's internal display itself or graphics card. Easiest way to check this is connect an external monitor and check what is happening.

  So if it was a normal external VGA monitor image it seems to be the graphics card. This means that the motherboard must be replaced and this can be done from an authorized service provider. Then get in touch with the guy and ask for help.

• DVD on Satellite 1800 movies are not read correctly

  I bought a Satellite 1800. One with processor Intel 1.1 ghz, 256 MB ram and 20 GB HARD drive.

  The DVD drive seems to work fine, but not with DVD movies. I tried various movie playing software, and each of them are not played correctly in the graphics and sounds. For me, it looks like a problem with the graphics display power rather than drive. If this machine must be able to play movies with standard charts, etc.?

  Thank you.

  Hello

  Firstly: have you installed the LATEST drivers offered on the download Drivers Toshiba site? Must check out and make updates if not already done. The other thing is: you have tried different players and they didn t give you the you´ve of quality of reading expected.

  So now try THIS player: www.videolan.org

  VLC player wins the best out of your equipment of machines even if you´ve had an older system. I played movies Divx and DVD on pentium 3 and pentium 2 machines, so your machine should theoretically able to do.

  Welcome them

• Web proxy settings are not configured correctly. Have problems with games and other applications.

  original title: apps do not correctly configured

  The default Outlook Express mail, The default Outlook in the Express News with the Internet Explorer Web Proxy are not configured correctly. Because I had problems with the game apps and stuff in my email address.

  Hello

  · You receive an error message or error code?

  You can access the links below:

  How Set Up Outlook Express - and http://support.microsoft.com/kb/2409264

  To configure the web proxy:

  HOW to: Configure Internet Explorer 6.0 as a Web Proxy Client in Windows 2000

  http://support.Microsoft.com/kb/310296

• M/S using wireless keyboard 800 and some characters are not displayed correctly

  Have just connected a new wireless keyboard M/S 800, and some characters are not displayed correctly. For example, I get "when @ (update 2) is pressed on the keyboard and the £ runs it shift 3.» Am currently using XP SP3.

  No problems with my original keyboard, Wired.

  Hi simoncd.

  What is your location.  The reason why I ask this is that your keyboard is set to the standard UK layout.  Looks like you have the keyboard for the U.S. keyboard layout.  Shift + 2 is the "on the UK keyboard, @ on the U.S. keyboard."

  To change the keyboard settings you must go to "Control Panel", then "regional and language options".  The first page allows you to set the number format and character relative to your location and also set the location.  Check these and modify accordingly so badly.  You want to then go to the second 'languages' tab and click on the button "Details".  Here you can set the default keyboard.  This changes if necessary.  This should, hopefully restore your keyboard to the presentation that you want.

• WAG160N Upgrade file is not the correct type or version of this device.

  I currently have Firmware Version firmware version: V1.00.09 on WAG160N. I tried to upgrade the firware of ussing.12 the following "WAG160Nv1-EU-ANNEXA-ETSI-1.00.12-code,0.zip" file I get the following error:

  Upgrade file is not the correct type or version of this device.

  Update failed.

  Please select the correct file and try again.

  I forgot that I had extracted the first .zip file. Who and the upgrade worked.

• I need to install the SP1 for Vista, but get message at the stage of installing "updates are not configured correctly. Change back '

  I need to install the SP1 for vista before SP2 for vista in order to use 2012 TrendMicro internet security. Thanks in advance

  Original title: Hi can someone help me please.  I need to install the SP1 for vista, but get this message at the stage of installing "updates are not configured correctly. How can change recovery"I fix

  I understand that you now have returned back to factory settings and have installed all updates except for service packs.

  .

  You will need to install the required service packs-

  How to get the latest Vista Service Pack
  http://support.Microsoft.com/kb/935791

  Windows Vista and Windows Server 2008 service Pack is not available for installation via Windows Update
  http://support.Microsoft.com/kb/948343

  You will need to install SP1 before installing Sp2.

  Once your computer is up to date, then you can think of Windows 7

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  I can't help you with the trend, but from memory, you must allow it's Installer to download to facilitate the download and installation etc.

• Windows Vista: updates are not configured correctly, returning from changes

  my computer may not be updated, whenever I turn on or restart my computer, the message "Configuring updates stage 3 of 3 0% Please wait, don't turn off your computer" comes but after awhile, it says 'updates are not configured correctly, returning from changes' it keeps past, I did everything I could , but nothing happened. What should I do?

  So far there are problems or there are many who have this problem?

  Have you tried to disable temporarily running anti-virus software?

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  950093 how to use the System Configuration utility to resolve configuration errors in Windows Vista
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 950093

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058/#appliesTo

  Troubleshooting in Win 7 vs KB971058 for Vista
  http://social.technet.Microsoft.com/forums/en/w7itproappcompat/thread/e1f0a807-E132-4FDC-ABF8-5bad87b64204

  The system update tool

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821