Unpublished IMPORT sessions

Similar Questions

• How to check the status of the import in Windows?

  Hello
  
  Import runs in my box of Wndows. The log file is not updated since long. How to check the status of the import job? FYI its oracle 10g.
  
  And I checked the database which.
  
  FYI
  ===
  Select * from DBA_DATAPUMP_SESSIONS;
  
  no selected line.
  
  Select * from DBA_JOBS_RUNNING;
  
  no selected line
  
  
  Select the username, machine, module, sid, State, event, seq #, session seconds_in_wait $ v where type <>'IMPORT' and username = "AUTOTIME";
  
  no selected line
  
  
  
  Please let me know.

  You actually look at the session of $ v and check the status of the session that is created by the import job.

  Sometimes the underlying tablespace is full, so import session just hangs, it must increase the size of the storage space.

  You should also look at alert.log file and see if there is any error message like "cannot extend table space '.

• Previous account of Import - Import Auto

  Hello

  I use Auto Import to import my RAW files. Each time LR matter my files the growing County of previous import. Is there a way to reset this counter to only show a true reflection of the pictures of my previous import session?

  Correct me if I'm wrong, but if you manually import the files to import the previous count resets itself automatically. I googled this problem and this question has been asked before - all users have been using automatic import.

  Any suggestions or answers will be greatly appreciated.

  Thank you

  If I understand your post correctly, you put a bunch of raw files in a control folder to import. Then later, you put a lot more into the same folder, and they imported. You complain that all end by in the previous import collection - this collection don't be emptied when you place the second batch of images in the control record.

  I would say that it doesn't work as expected. Normally, people use the control folder to collect images that are uploaded to a tethered device, one at a time. In other words, a series of batches that contain only one image in each. If I do that, I would like that all of these images being in the previous import. I would not only the last image imported to be there. There is no way for LR distinguish between the two cases.

  You use a feature in a way that goes beyond what it was designed for, and you can't wait until he does what you want it to do.

  HAL

• Issue during the huge import table

  Hello
  
  I have an import of 4 huge tables with several million lines. Now on the importation of the first table if there is an error such as:

  IMP-00003: ORACLE error 1652 encountered
  ORA-01652: unable to extend temp segment by 128 in tablespace TEMP01

  And the command at this prompt. ORA-01652: unable to extend segment temp of 128 in tablespace TEMP01. I haven't specified resumable = y in the import (unluckily). So, what should I do... I added the space in TEMP01 already. Will be the import session recognise that and go ahead and do the next task or will it finally error?
  
  Thank you

  Hello
  Do not kill it.because temp space is mainly used for sorting operation.if there is no temp space while it uses the swap only space.the you kill importation is when it generates errors or warnings fatal.
  Kind regards
  Mohamed

• Import database using 11 g is important all the packages with debugging information

  We are modernizing our database from 9i to 11g using imp/exp. The problem we see is that all packages/procedureas/functions are imported with debug information.
  It seems that imp utility changes import session to set PLSQL_DEBUG = TRUE. On the 9i database, objects are not compiled with debugging information, and we do a full import with parameters FULL = O and IGNORE = N.
  
  We found no information about this behaviour anywhere while we ask this is the default behavior, can it be changed so that the imported objects are not compiled with debug information and if not, what is the better and more effective way to drop all debug information on objects that have? We hoped to use DBMS_UTILITY.COMPILE_SCHEMA, but it recompiles objects preserve debug information on the objects that had them before running the command. We can EDIT the PACKAGE COMPILER on all packaging and it will solve our problem, but it will take a lot of time to recompile all our objects from our database is very large.

  Hello

  I just did a test of my own. Here's what I did:

  Database without active debugging:

  create or replace function scott.foo (in number) return number is
  Start
  return 10;
  end;
  /

  has ran exp then looked the dumpfile. That's what I saw:

  ALTER SESSION SET "_LOAD_WITHOUT_COMPILE" = PLSQL
  FORMAT71 CREATE FUNCTION 'FOO' bunch of non ascii here
  ALTER SESSION SET '_LOAD_WITHOUT_COMPILE' = NONE
  ALTER FUNCTION 'FOO' COMPILATION REUSE SETTINGS TIMESTAMP ' 2010 - 03 - 16:10:31:03'

  This resembles the exp has detected that the debug flag is not set and the function exported and recompiled it reset the compile time for the same time of the compilation of the source database.

  Then I did:

  ALTER session set plsql_debug = true;
  create or replace function scott.foo2 (in number) return number is
  Start
  return 10;
  end;
  /

  At this point, function foo was built without debug and function foo2 was build debug.

  I ran exp again and looked in the dumpfile. That's what I saw:

  ALTER SESSION SET "_LOAD_WITHOUT_COMPILE" = PLSQL
  ALTER SESSION SET NLS_LENGTH_SEMANTICS = 'BYTE' PLSQL_CODE_TYPE = 2 = PLSQL_OPTIMIZE_LEVEL "INTERPRETED" PLSQL_DEBUG = TRUE PLSQL_WARNINGS = "DISABLE: ALL" PLSQL_CCFLAGS = "
  CREATE FORMAT71 FUNCTION 'FOO2' - of the bunch of non ascii here
  CREATE FORMAT71 FUNCTION 'FOO' - lots of non ascii here
  ALTER SESSION SET '_LOAD_WITHOUT_COMPILE' = NONE
  ALTER FUNCTION 'FOO2' COMPILATION REUSE SETTINGS TIMESTAMP ' 2010 - 03 - 16:10:35:46'
  ALTER FUNCTION 'FOO' COMPILATION REUSE SETTINGS TIMESTAMP ' 2010 - 03 - 16:10:31:03'

  In this case, it seems that these two functions will be built with active debugging. I don't know what is happening in your case. You can contact the Oracle Support to see if they know about this problem and if they know of a work-around.

  Good luck

  Dean

• Is it possible to sort the images by file name?

  I imported a record of 200 images in Photos for OS X (El Captain). Image files have been appointed in the order - I want them to appear in a slide show: photo_01, photo_02 etc...

  Once I imported the images - I found them all out of order - and the only options I can find in the view menu are somehow 'oldest first', 'newest first' or ' title '. Please, someone tell me I'm missing something obvious - he and not that Apple chose to omit the possibility to sort the images by name? If this is the case - I'm speechless - how is f - ing stupid!

  Sort by file name is not an option in the Photos. Albums and smart albums you yourself set can be sorted by name, date of capture, or manually.

  Sorting through the predefined albums is automatic:

  • 'Photos' display with moments and collections is sorted by date of capture and the location.
  • 'All the Photos' display is sorted by the date of the import session.
  • Other built-in smart albums are sorted by the date of capture.

  You can see the current sort order, preset, if it is grayed out in the "view > sort ' menu.

  As a workaround:

  1. If you need to want pictures to be sorted by file name, copy the name of the file in the title field. Then, create a smart album of the items and sort by title. We have posted a trick to copy the name of the file in the title field for the selected photos: Script: change the title filename without Extensionor: Script: batch change the titles of the Extension/w
  2. Or view your photo library in pictures of power.  This versatile tool lets you browse photos as a list or thumbnail while looking the other metadata under the thumbnails or displayed as list with columns selected and sorted by columns.

  You can do a lot with the free trial: download PowerPhotos here: Fat Cat Software-PowerPhotos

• In the case of Facebook I control-click on Add Image to Photos, where Photos can I find the image being added?

  On Facebook I Ctrl-click on a photo and then choose picture add pictures on the shortcut menu.  Subsequently, photos where I can find the image added?  Is there a systematic way?

  Sometimes, images from Facebook are added at the end of my table of Photos.  This table is always keep sort by oldest first.  However, some images from Facebook appear to come from the previous dates.  At least one, I found a photo added to Facebook in the middle of a time at which the additional picture has nothing to do.  My guess is the added photo's date time whereby it sorts here and pictures imported, nor others currently have location data.  If any location data would show that the imported photo was not present.

  I imported several other photos from Facebook, which I can't find.  I think I checked the album last import and did not find them here.  I suspect they have dates, which I do not know, and causing them to be placed somewhere other than the end of my library.

  How can I find the imported photos from Facebook?

  When you see a photo in Safari and ctrl + click or right-click, then use "Add photo", it will be added to the photo library without appearing in "last import.  It goes the same for adding photos of Mail in this way.

  But you can find the album "AllPhotos".  All new photos added this way should appear at the bottom of all the pictures, because this album is sorted by the date of the import session.

  If you see the photo added in the last import, control-click it or right click and select 'display in the Moment '.  This way you can find at the moment, it has been added to.

• How to remove the photos from the event?

  My IMac says that the tax Turbo I download only readable and said that not enough volume, what should I do?

  is the pictures I imported my camera take too much space? These photos to receive in the event and the Photos, so I need to delete the event, please tell me how to remove these pictures, thank you.

  You use iPhoto for Mac?

  'Photos' and 'Events' are to show you the same pictures, but differently.  They are no duplicates, but only different ways to access the same pictures.

  If you remove a photo of 'Events', it will be completely removed from your iPhoto library and the photo will be lost. The facts prove the pictures grouped by the import session, and 'Photos' show you the same photos as a continuous stream.

  If you need to liberate storage, consider moving the iPhoto library on an external drive, to have more storage for your photos.

• Loss of internet connection on windows Vista Enterprise edition

  Hello

  I have a very serious problem, started only last Monday, I was using my laptop to last more than three years and having a problem just last week about the loss of internet connection after an hour or two after restarting the laptop.

  I thought that a virus could have an effect on this, so last night I reinstalled the operating system, but it does not work too. I connect to the internet via an ethernet to a motorola modem cable, do not know how to solve this problem now.

  I searched through various sites and followed quite a few options but that did not help. Still have a problem, someone please answer as soon as POSSIBLE. I have a very important session the game and on Fri and it will be very costly if I can't then I would like to be back to normal as soon as POSSIBLE.

  Go to the website of the manufacturer of your Modem > make sure you have the latest Firmware in Vista for it.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Troubleshoot network adapter problems to Microsoft link above.

  Try without commitment TCP/IPv6:

  If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• Recommendations for the Organization of the disk image?

  I am moving in Aperture to LR and looking for general comments on the Organization of the image before you start the migration. Since the opening, I will export edited JPEG version final (with metadata), the image of origin (without metadata), which is usually a RAW or TIFF file. I want the original version, in the case where I want to re - edit in LR, while most of the images will never hit again. I intend to place the images in the folder structure as described below and use the import option 'Add' to keep the pictures in the files when importing to the RL. Records will be organized by "Year" with subfolders for files 'Final' and 'Original '. The hierarchy looks like this:

  Folder "Images".

  > file "1983".

  > File "final".

  > JPEG 1

  > JPEG 2

  > etc.

  > File "Original".

  > TIFF

  > TIFF 2

  > etc.

  > file '1984 '.

  > File "final".

  > JPEG 1

  > JPEG 2

  > etc.

  > File "Original".

  > TIFF 1

  > TIFF 2

  > etc.

  This body will allow me to easily find the original file in case I needed to re - edit an image (the original and final images have different file names). Will there be a major drawback in the use of this method of organization? For example, it seems that the images can be stacked if they reside in different folders.  I thought 'stack' the original and final versions, but discarded the idea for other reasons. However, I'm not sure if I will create other problems by using a folder like this system.

  Many of my images are scanned family photos dating back to 1880, kind of organization per year seems to be a good choice for me. I use keywords to group events in the year (1983, 1983 b, etc.). I'll create smart collections using keywords for the display, I don't need a folder structure based on events.

  Otherwise, I could use the import options 'Copy' or 'Move' and let the LR to organize files. I don't know how the default LR organization works (in "import session or date?). I suspect that it is not simply place them in a single folder.

  I appreciate all the thoughts about the proposed organization. I prefer to learn from mistakes of others rather than mine! It is quite possible that the good answer to my question is "it does not matter."

  Thanks David

  In my opinion, the only thing that works reliably is a simple year-> Date structure. Another thing is just a waste of time and doesn't complicate your life. It is the structure that Lightroom does by default when importing. It is simply:

  2015

  2015-01-01

  2015 01-02

  etc.

  This greatly simplifies organization because it is always consistent and allows you to easily backup or move folders to external hard drives if your a resident fills up too.

  It is unnecessary to have initial and final records. You only need the originals. Any edited image, you need is exported a lot faster since Lightroom when you need so you can make the size and format you need, when you need and it is much easier to find the desired image in Lightroom quickly to scroll through the folders in the Finder Explorer / in any case. The key is really well-organized metadata as dj says. If you the keyword you can find something quickly. Finding accurate and such dates is also trivial using the filter bar.

  That said, Lightroom doesn't really care how you organize your originals so do what best suits you.

• How to reconnect broken thumbnails?

  Copied 15 + photos from the old drive to a new drive.  A few photos, came across OK, others not, to have a picture to look at.  It's random, what images have images and that display a broken thumbnail icon.    If I select the reconnection (on a single photo), the missing file is not an option to select.  All THE missing files is available, but when that is selected, it hangs the system.  Too many pictures to find all the photos.  What steps should I take to get my photos is displayed?  I don't mind do it in sections.

  15 + pictures to import is not a difficult task for the Organizer.

  I guess that you import your photos into an existing catalog? Then there is no reason, you should find the 'missing' files to a new import session.

  Don't forget your catalog is healthy before you import: reconnect missing files, fix and optimize.

  If you have broken thumbnail, which is a corrupt file or format not supported.

  The command "reconnect" is only used on the missing files, which is not your case if your catalog have missing files before importing.

  You can use the right-click context menu: "update thumbnail. This should work for a batch of files highlighted.

• Job knows a wait can be resumed.

  Aloha!
  
  I am currently importing a datapump(90GB). As the datapump file is large, I put all the storage space in a certain size.
  
  Problem is during the import hard im a wait can be resumed. Since the TS are to small for imports.
  
  Is it possible to set the import or the script of TS that importation will not experience a wait that can be resumed?
  
  Thank you

  is it possible to import to jump and do not go to the waiting can be resumed once it reaches the allocated size?

  No.Import will go to State can be resumed. If you kill the import session you will have all the required data in the table.

  Why not add a new data file in the HARD drive location.

  Anand

• the export hangs

  I use oracle 9i R2 on windows
  
  I have a question about exporting. My witches of export to a table.following are the details of the process of
  
  
  C:\Documents and Settings\Administrateur > imp psb/rdbmsora9i@server fromuser = gc06
  7 touser = psb file = c:\yr0607backup.dmp
  
  Import: Release 8.1.7.0.0 - Production on Fri Nov 28 16:24:42 2008
  
  (c) Copyright 2000 Oracle Corporation. All rights reserved.
  
  
  Connected to: Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
  With partitioning, OLAP and Oracle Data Mining options
  Release 9.2.0.1.0 - Production jserver
  
  Export file created by EXPORT: V08.01.07 by conventional means
  
  CAUTION: objects have been exported by GC0607, not by you
  
  import in WE8MSWIN1252 and UTF8 NCHAR character set
  Customer export uses WE8ISO8859P1 (possible character set conversion) character set
  . . table 'ACGRP_MST' import 92 lines imported
  . . rows in table 'AC_MST' import imported 3786
  . . importing table "ADJ_MST" 0 rows imported
  . . table 'AD_BRANCHES' import 74 lines imported
  . . importing table "AD_CODE_MST" 8 imported lines
  . . importing table "AD_CONNECT_WEIGHBRIDGE" 0 rows imported
  . . importing table "AD_CONSOLIDATION_MST" 18 imported lines
  . . table 'AD_CONSOLIDATION_TRN' import 73 lines imported
  . . importing table "AD_EXEC_QUERY" 0 rows imported
  . . importing table "AD_FIELDS_MST" 13 imported lines
  . . importing table "AD_MODULES" 5 imported lines
  . . table 'AD_MODULE_FORMS' import 563 lines imported
  . . importing table "AD_ROLE_MST" 1 imported lines
  . . importing table "AD_USERRIGHTS_DTL" 207459 imported lines
  . . importing table "AOC_TRN" 6 imported lines
  . . table 'T_CI_COAL_SALE' import 59 lines imported
  . . import of 2849 lines imported from the table 'USER_BRANCH '.
  . . importing table "USER_MST" 52 imported lines
  . . table 'VENDOR_MST' import 884 lines imported
  . . importing table "VOD_DTL".
  
  
  What could be the problem?
  
  
  Thanks and greetings
  VD

  VD,
  One way to check is to see if the session performing import expects an event like Sybrand suggested.
  The other option would be to follow the import session and see what happens. You can use the option Trace = y with import command. It would create a trace file in the user_dump_dest which can be used to find the below question.

  imp system/passwd full=y file=expdat.dmp log=exp.log trace=y
  

  HTH
  Aman...

• DataPump - how to change parallel number in job market

  run import data by using the settings file pump, order follows
  
  Impdp parfile dp_import.par logfile = dp_load.log = job_name = parallel dbload = 4
  
  
  question: I need to change parallel to 4-2, but lost session (terminal window), open another session and I can see the job runs, output follows. How can I change parallel?
  
  SQL > select owner_name job_name, job_mode, State, level of dba_datapump_jobs.
  
  OWNER_N JOB_NAM JOB_MODE STATE DEGREE
  ------- ------- ---------- ----------- ----------
  DBLOAD SYSTEM COMPLETE OF 4 PERFORMANCE

  In your new session.

  Impdp attach = job_name who will ask you the user name and password.
  Then, you will be connected to the datapump import session.

  something like this:
  job_name > type 2 Parallels and enter.

• How can I change the properties of hearing session after import omf.

  After you import an omf. Everything is imported correctly. But the session properties do not match. I would go back to 24-bit. How can I change the properties of such session of the bit depth, without having to create a new session? There used to be an advanced session properties window.

  When you save the hearing session, if you use ' Save as ', then you will get the options to set the default save for what you want.