Unrecognizable USB

Similar Questions

• How can I get a unrecognizable drive off a USB Superdrive

  I inadvertently put a Windows (bla)! CD in my SuperDrive USB drive. When it is plugged into a USB 3.0 slot, the player will turn up, but will not create a disk image and therefor cannot be ejected. Any suggestions on how to take out the drive will be appreciated.

  Open a Terminal

  At the command prompt, copy and paste this command

  drutil of external ejection

  Press return

• Device USB-6009, not found problem

  Hi all

  So my VI and USB-6009 worked fine until recently.  I noticed the VI was read or graphing correctly the analog input channel information.  My firmware is up to date, but I noticed a problem.  In Isdaq, he will recognize the USB-6009 case is connected, then when I start my VI and to stop it, I double check Isdaq for my device and it doesn't recognize any device.  I have to unplug the daq and reconnect to Isdaq to recognize the usb-6009 case again.  But whenever I start my VI, it does not collect all the data and makes the unrecognizable device.  Do you know what could be the problem?  Is attached the VI I ran in case you want to watch.  Its working fine so far.

  BTW, I'm under Labview on Mac OS X

  Thanks for the help!

  Hello Solis,

  I recommend you to make changes to the parallel tasks to use the cluster of the error to force the order of execution, given that NEITHER-DAQmx Base is not multi-thread safe (review NOR-DAQmx Readme). Please check if this alleviates the problem.

  Best regards

  M Ali

  Technical sales engineer

  National Instruments

  www.NI.com/support

• Usb connection problem scanner Fujitsu fi-6230

  Hi, im trying to connect a scanner usb (Fujitsu fi-6230). I installed ISIS and Twain driver (HP Compaq 8300 - Windows 7 x 86) host and the vdi (Windows7 x 86). The client is version 5.1 and I tried with PCoIP either with RDP (as far as I know do not support scan usb). The scanner is recognized by the host, but in the virtual is unrecognizable device not even as being unknown. There is no restriction for usb redirection in the display manager. I have uninstalled/installed Vmware USB Host controller, but did not work. Do I have to activate the GPO by default DC on RDP redirection? Can you please help, I don't know what is happening.

  Thanks in advance

  Well thank you for the help. No upgrades have been made. It was a new image. A windows 7 OS has been installed and has been optimized according to best practices of vmware. After that, the appropriate vmware view agent has been installed. The same agent was installed in another image whose behaviour is normal.

  I found this: https://communities.vmware.com/thread/440975 I did the quickprep instead of sysprep operation. I'll try the 2nd recommended method and I'll let you know the Message was edited by: alipkok

  After the 2nd solution, the problem seems to be resolved. I reinstalled agent version 5.0.1 - 640055. Thank you message was edited by: alipkok

• USB disabled after the update of the Sierra (a short circuit and a work)

  Hi, when I bought my mbp 13 inches mid2012 (used, not new) I noticed that a USB port did not work. In the Yosemite sometimes I noticed that a USB port consumed too much energy and have been disabled. (I think because the usb port has been short-circuited. Year when it was time to update the mbp to El Capitan I had a few panic the kernel and the newspaper was shown as the last driver loaded the USB driver, so I kept the mbp with Yosemite. A few days ago, I updated for Sierra but only usb which used to work stopped working. It has enabled and turned on but Finder and disk utility does not see the drive. In an Apple dealer they said that could be established relationships with some oxide and next week will take it and see what the problem is.

  If there is someone with the same problems, please tell me what to do! I don't want to put in the trash my mac just for a flash drive... but I need!

  Hi Supermene,

  Thank you for using communities of Apple Support. Based on what you said, it appears as a USB device is not recognized in one of the USB ports. There are a few things that can cause this. I recommend you read these articles, which may be able to help solve the problem.
  

  macOS Sierra: If a USB device does not work

  Reset the management system (SCM) controller on your Mac.

  See you soon.

• MacBook Pro USB Ports

  MacBook Pro my keyboard and wireless mouse work in my usb ports but I can't mount drive flash sticks? Do not display in the finder, but will be blink in disk utility then disappears?

  Flash drives show in disk utility?

  In the Finder > Preferences > sidebar > devices is verified external drives?

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• Boot Camp El Capitan Windows ISO USB key

  Install Windows 7 with a USB key that is already configured as a windows installation disc, Boot Camp did not acknowledge the presence of the USB and claimed installation media. I inserted the DVD and it started to install.

  Is it possible that the Thumb control procedure is no longer necessary or do I lucky/unlucky?

  If she doesn't have a drivers W7 Apple pre-start, it won't work.

• New Audio USB Interface lose sound on El Capitan

  Hi all!

  A few weeks ago that I upgraded my MacBook Pro retina 15 "end 2013 to El Capitan, after that my USB Audio Interfaces (Focusrite Scarlett 2i4) and Safire 6 USB stopped working properly. Both work correctly when they are connected to an iMac 5K running the same operating system.

  I can listen to Audio for some time (about 10-2 Minutes, it is always different), when the Audio starts to crush und get outs, after a certain time there is only silence "click on" come out of the speakers.

  Heres an Audio file of the sound that results from: https://www.dropbox.com/s/5nb96bmdh47kmi2/20160923%20141619.m4a?dl=0

  I already tried to reinstall OS X (starting with CMD R and reinstall OS), reset PRAM and SMC. Nothing has changed the question. Any ideas where it comes from?

  Greetings

  Chris

  It is most likely a software conflict. Note the time at which audio is running out. Open the Console and look for accidents or mistakes at this time.

  The reason why it crashes on a mac, but not the others most likely is related to differences in software installed. Run Etrecheck on touch mac and post the report here.

• Crash when disconnecting USB connected to the Steinberg UR-22

  Updated for Sierra recently.

  When I unplug my Steinberg UR-22 by the USB port, the operating system crashes instantly and restarts.  EVERY TIME.

  I plug/unplug often and have never had this problem until the Sierra.  I use my Air for labor and for the game, so he forces me to move to and from the Office to Home Office... or around the House.

  Any suggestions?

  Thank you!

  The Yamaha Steinberg USB driver only supports OS X 10.9, 10.10 and 10.11. You need to ask Steinberg support if or when they intend to support macOS Sierra 10.12.

• How to upload photos on a USB key on the mac pro book photo

  I just want to know how to download my pictures that are in the photos on my macbook pro to a USB for guard duty.

  Select them in Photos and export (menu, file == > export) in a folder on the desktop and in the finder, drag the foldr to the thumbdrive mounted, unlocked

  LN

• USB charger - 29W C - compatibility with 12.9 "iPad Pro

  I'm looking for an answer as to if the USB - C 29W charger is compatible with the iPad to 12.9 "Pro. I know this question has been asked and answered by the communities in the past, but when I went to the Apple Store to buy the charger today, the staff told me that the charger could damage my battery over time. I then started a support chat session to confirm the answer and the representative said (and I quote) "If 2 people advised me not to do something, I would not even waste my time." We could care less if you want to damage your unit. »

  First of all, I never got a rude responses to Apple, so it was a surprise. Secondly, I really just trying to get an answer to the question. Can anyone (especially Apple) help out me? Thank you!

  If it is not in the specs of the iPad, you're crazy to use it. The Chargers are cheap, the iPad is not.

  Barry

• Can I create a recovery bootable USB through disk utility?

  My HARD drive is dying, I can't access my Macintosh HD partition anymore and I can't reinstall OS because I SMART errors. Before the format and reinstall the attempt to load slow my computer, random errors, etc. So I definitely think that the HARD drive is near death. My plan is to replace my HDD for a Virgin SSD, I perform this task several times on computers of the victory but for MAC, I wonder how I will load the new OS. Can I make a bootable USB with the recovery partition, but on a USB key tools? Unofrtunately I have more available Mac to create the USB bootable through itunes.

  My computer is the MacBook Pro (13-inch mid 2010), I have also all original packaging somewhere, if there is a CD that I can use, I certainly can get too.

  Any advice?

  Thank you!

  Apple have this to do a USB installation...

  Create an installer for OS X - Apple support bootable

  Another option is to use the diskmakerx.com application

  You must have the OS installer downloaded to make these methods of work is probably not practice on your failed drive.

  Both of these options are to run a 'normal' operating system too. The recovery partition is not 'normal '.

  Another option is to use the Internet recovery mode if your Mac supports...

  Computers that can be upgraded to use OS X Internet Recovery - Apple Support

  On macOS recovery - Apple Support

  Use wired ethernet for best results, since it will download a bootable OS & then download the installer of the OS also.

  I suspect you have the update of the firmware installed to add this feature if it has been updated over the last 3 years

  You may be able to generate a score of alternative recovery to another disk (such as a USB key) If you want to just "compensation of base OS.

  OS X: on Recovery Disk Wizard - Apple Support

  A last solution would be to clone your drive failing on an external drive (or use the new SSD in a proper case). That can be done in the modes of recovery via disk utility. Basically, you use a feature to "restore" to clone one volume to another. (I don't see clear instructions for the moment so ask if you want to pursue this option).

• Connection keyboard and mouse USB Wired stall

  Hello

  My computer repeatedly interrupts the connection to my Wired USB mouse and keyboard.  Usually around one every 30 seconds, the connection falls for 1 to 1.5 seconds, then comes back.  Meanwhile, the cursor hangs - I can't click anything, and I can't press any keys on the keyboard.  For example - when I type, I have my keyboard will stop working for a while, and no text will appear.  This is particularly problematic when I play games.

  I tried to reboot the computer, reset the SMC and the mouse and keyboard.  I also tried all USB entries on my mac (4 in total), and the problem persisted with each of them.  This leads me to believe that it is either a problem with all the USB inputs, or a software problem.

  I have an iMac 27 inches, mid-2011 with OS X El Capitan 10.11.6 (specifications: 3.4 GHz Intel Core i7 processor, 16 GB with 1333 MHz DDR3 memory and storage capacity of 2 TB).

  I use a wired USB (Logitech G402) mouse and keyboard USB Wired (Razer BlackWidow Stealth).  I have the latest version of Logitech Gaming Software and Razer Synapse installed for support.

  I would appreciate help.

  Check if there are updates available driver.

  To check if the problem is with the USB to your Mac controller, test with a different keyboard or mouse.

  To check the extensions conflicts, etc., try the startup mode.

  -----

  Restart in Safe Boot mode by holding down the SHIFT key at startup. Secure boot is quite slow because the operating system performs some cleanup and verification tasks, so give it time. Once you're completely connected, restart normally.

• Change of keyboard USB external Apple connected to the Macbook Pro

  Dear ladies and gentlemen,

  I need your help. I have a MacBook Pro running the last Sierra 17 "MacOS. I bought a 27 "Thunderbolt display and wanted to use a full external keyboard USB Apple (with the help of the digital keys). I have connected to the screen "USB port, closed down the internal screen MacBook... magic happened... keyboard poped office to the top of the screen external AND external full resolution was working properly..." Unfortunately only for 1-2 minutes, then the layout changed back irreversible in a layout resembling the layout if I would press "alt". Only way I could "resolve" to disconnect the keyboard USB plug and then plug again... but after 1-2 minutes did the same thing...

  I tried to plug the USB plug into the MacBook Pro directly, but the same thing happened...

  I am so unhappy that I can't use correctly the full length external Apple keyboard, large... Any hint/resolution?

  Thank you for your help in advance,

  Péter

  System Preferences > keyboard > Input Sources > [√] see Input menu in the menu bar

  ... then the menu icon before, choose «Show Keyboard Viewer»

  Now, look at the chart of the keyboard that appears on the screen. If the Alt/Option key is stuck, the key will be gray, as if it is held down. If you press it again, he himself is not?

• Impossible to upgrade usb macos sierra

  Hello!

  Created a USB Sierra installer in accordance with the old guide: create a bootable OS x - Apple support Installer

  The command used is:

  sudo /Applications/Install\ macOS\ Sierra.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume --applicationpath /Applications/Install\ macOS\ Sierra.app 

  USB is supposed to be successfully created, and I get the icon 'Install macOS Sierra' on the desktop after inserting/editing of the USB. I then open it and run the Setup program, it tells me it takes about 6 minutes, and then it tells me to restart in the sierra of macOS. After the reboot, I'm still on El Capitan!

  What I am doing wrong? I would like to install from USB to avoid having to download each of my Macs! It would be very unhelpful in my time and my bandwidth!

  As soon as it restarts, try to select the installer from USB as a boot using Boot Manager device - an Option button and selecting this device.

  Please read an external USB (Mac Intel) - storage device from Apple Support.